Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2310.01630 · IEEE Computer Architecture Letters

Inter-Temperature Bandwidth Reduction in Cryogenic QAOA Machines

Yosuke Ueno, Yuna Tomida, Teruo Tanimoto, Masamitsu Tanaka, Yutaka Tabuchi, Koji Inoue, Hiroshi Nakamura

Published Oct 9, 2023• 9 citations
arXivHTMLPDF

Abstract

The bandwidth limit between cryogenic and room-temperature environments is a critical bottleneck in superconducting noisy intermediate-scale quantum computers. This paper presents the first trial of algorithm-aware system-level optimization to solve this issue by targeting the quantum approximate optimization algorithm. Our counter-based cryogenic architecture using single-flux quantum logic shows exponential bandwidth reduction and decreases heat inflow and peripheral power consumption of inter-temperature cables, which contributes to the scalability of superconducting quantum computers.

DOI
10.1109/lca.2023.3322700

Related papers

C3-VQA: Cryogenic Counter-Based Coprocessor for Variational Quantum Algorithms

Yosuke Ueno, Satoshi Imamura, Yuna Tomida +5 more

Cryogenic quantum computers play a leading role in demonstrating quantum advantage. Given the severe constraints on the cooling capacity in cryogenic environments, thermal design is crucial for the scalability of these computers. The sources of heat dissipation include passive inflow via intertemperature wires and the power consumption of components located in the cryostat, such as wire amplifiers and quantum–classical interfaces. Thus, a critical challenge is to reduce the number of wires by reducing the required intertemperature bandwidth while maintaining minimal additional power consumption in the cryostat. One solution to address this challenge is near-data processing using ultralow-power computational logic within the cryostat. Based on the workload analysis and domain-specific system design focused on variational quantum algorithms (VQAs), we propose the cryogenic counter-based coprocessor for VQAs (C3-VQA) to enhance the design scalability of cryogenic quantum computers under the thermal constraint. The C3-VQA utilizes single-flux-quantum logic, which is an ultralow-power superconducting digital circuit that operates at the 4 K environment. The C3-VQA precomputes a part of the expectation value calculations for VQAs and buffers intermediate values using simple bit operation units and counters in the cryostat, thereby reducing the required intertemperature bandwidth with small additional power consumption. Consequently, the C3-VQA reduces the number of wires, leading to a reduction in the total heat dissipation in the cryostat. Our evaluation shows that the C3-VQA reduces the total heat dissipation at the 4 K stage by 30% and 81% under sequential-shot and parallel-shot execution scenarios, respectively. Furthermore, a case study in quantum chemistry shows that the C3-VQA reduces total heat dissipation by 87% with a 10 000-qubit system.

arXiv:2409.07847•IEEE Transactions on Quantum Engineering•Dec 23, 2024•6 citations

Integration and Resource Estimation of Cryoelectronics for Superconducting Fault-Tolerant Quantum Computers

Shiro Kawabata

Scaling superconducting quantum computers to the fault-tolerant regime calls for a commensurate scaling of the classical control and readout stack. Today's systems largely rely on room-temperature, rack-based instrumentation connected to dilution-refrigerator cryostats through many coaxial cables. Looking ahead, superconducting fault-tolerant quantum computers (FTQCs) will likely adopt a heterogeneous quantum-classical architecture that places selected electronics at cryogenic stages -- for example, cryo-CMOS at 4~K and superconducting digital logic at 4~K and/or mK stages -- to curb wiring and thermal-load overheads. This review distills key requirements, surveys representative room-temperature and cryogenic approaches, and provides a transparent first-order accounting framework for cryoelectronics. Using an RSA-2048-scale benchmark as a concrete reference point, we illustrate how scaling targets motivate constraints on multiplexing and stage-wise cryogenic power, and discuss implications for functional partitioning across room-temperature electronics, cryo-CMOS, and superconducting logic.

quant-pharXiv:2601.03922•IEICE Transactions on Electronics•Jan 8, 2026•10 citations

SFQ counter-based precomputation for large-scale cryogenic VQE machines

Yosuke Ueno, Imamura, Satoshi, Yuna Tomida +5 more

The variational quantum eigensolver (VQE) is a promising candidate that brings practical benefits from quantum computing. However, the required bandwidth in/out of a cryostat is a limiting factor to scale cryogenic quantum computers. We propose a tailored counter-based module with single flux quantum circuits in 4-K stage which precomputes a part of VQE calculation and reduces the amount of inter-temperature communication. The evaluation shows that our system reduces the required bandwidth by 97%, and with this drastic reduction, total power consumption is reduced by 93% in the case where 277 VQE programs are executed in parallel on a 10000-qubit machine.

arXiv:2403.00363•Mar 1, 2024•3 citations

Low-Power Half-Flux-Quantum based Counter Circuits for Cryogenic Quantum Computers

Yuki Matsumoto, Teruo Tanimoto, Masamitsu Tanaka +1 more

The number of bits in quantum computers needs to be increased since large problems must be solved to achieve quantum acceleration. Superconducting qubits are the most advanced qubit devices currently available. A method has been proposed to place a quantum-classical interface on a 4 K stage to ensure scalability. The practical implications of a simple counter circuit in the interface and its role in processing the qubit read results have been demonstrated. A method is needed for configuring a counter circuit with low power consumption to improve scalability. In this paper, we design a novel counter circuit using the Half-Flux Quantum (HFQ) technology. This technology operates in cryogenic environments and has lower power consumption than the Single-Flux Quantum (SFQ) tech-nology. In addition, we conducted a comparative evaluation of circuits dedicated to the NISQ algorithm using SFQ and equivalent circuits implemented using HFQ. Assuming the same power consumption technology applicable to SFQ can be applied to HFQ, we found that the proposed HFQ-based counter circuit can reduce the power consumption by up to 97%.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 15, 2024•4 citations

Power Reduction of Sfq Readout Circuit for Superconducting Quantum Computers

Masumi Kanda, Yuki Matsumoto, Teruo Tanimoto +2 more

The digital circuits in a superconducting quantum computer must be cooled to cryogenic temperatures in a dilution refrigerator for control and information readout of the qubit information. Because the dilution refrigerator's heat capacity is limited, extremely low-power digital circuits are required. Single-flux-quantum (SFQ) circuits and Josephson photomultipliers (JPMs) are expected to serve as control and readout circuits for superconducting quantum computers. These circuits generate minimal heat, but further reductions in power consumption are required to make it possible to build larger, more scalable faulttolerant quantum computers (FTQC). In this paper, we propose a low-power and reliable peripheral circuit for JPM-based qubit readout utilizing an SFQ counter circuit. The counter performs majority voting across repeated readouts, significantly improving the reliability of the JPM readout process. Additionally, we quantitatively evaluate switching errors in SFQ circuits using Josephson junctions with low-critical current values. By integrating these circuit techniques and simulation results, we find that the proposed approach achieves a 90% reduction in power consumption while effectively suppressing the increase in readout error.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Aug 30, 2025•0 citations

Interface Architectures for Low-Latency Cryogenic Control in Quantum-Classical Systems

Krishna Yaduvanshi

As superconducting and silicon-spin quantum processors scale from hundreds to thousands of physical qubits, the interconnect bottleneck between room-temperature classical electronics and mK cryogenic quantum processors poses a critical physical and architectural barrier. Low-latency control loops—essential for Quantum Error Correction (QED), fast reset protocols, and adaptive quantum algorithms—are strictly constrained by thermal load budgets, speed-of-light signal latency across thermal stages, and the bandwidth limits of coax lines. This paper presents a detailed architectural framework for next-generation quantum-classical interfaces. We investigate the transition from traditional, room-temperature arbitrary waveform generators (AWGs) connected via coaxial lines to co-integrated, cryo-CMOS, and single-flux-quantum (SFQ) digital-to-analog and digital signal processing control layers operating directly at the 4 K and 20 mK stages. We evaluate thermal transport, power dissipation, signal attenuation, and physical routing constraints, proposing a heterogeneous hybrid-control topology that satisfies latency budgets below 100 ns while remaining within the tight thermal limits of modern dilution refrigerators.

International Journal of Research Publication and Reviews•Oct 1, 2026•0 citations
The bandwidth limit between cryogenic and room-temperature environments is a critical bottleneck in superconducting noisy intermediate-scale quantum computers. This paper presents the first trial of algorithm-aware system-level optimization to solve this issue by targeting the quantum approximate optimization algorithm. Our counter-based cryogenic architecture using single-flux quantum logic shows exponential bandwidth reduction and decreases heat inflow and peripheral power consumption of inter-temperature cables, which contributes to the scalability of superconducting quantum computers.
Cryogenic quantum computers play a leading role in demonstrating quantum advantage. Given the severe constraints on the cooling capacity in cryogenic environments, thermal design is crucial for the scalability of these computers. The sources of heat dissipation include passive inflow via intertemperature wires and the power consumption of components located in the cryostat, such as wire amplifiers and quantum–classical interfaces. Thus, a critical challenge is to reduce the number of wires by reducing the required intertemperature bandwidth while maintaining minimal additional power consumption in the cryostat. One solution to address this challenge is near-data processing using ultralow-power computational logic within the cryostat. Based on the workload analysis and domain-specific system design focused on variational quantum algorithms (VQAs), we propose the cryogenic counter-based coprocessor for VQAs (C3-VQA) to enhance the design scalability of cryogenic quantum computers under the thermal constraint. The C3-VQA utilizes single-flux-quantum logic, which is an ultralow-power superconducting digital circuit that operates at the 4 K environment. The C3-VQA precomputes a part of the expectation value calculations for VQAs and buffers intermediate values using simple bit operation units and counters in the cryostat, thereby reducing the required intertemperature bandwidth with small additional power consumption. Consequently, the C3-VQA reduces the number of wires, leading to a reduction in the total heat dissipation in the cryostat. Our evaluation shows that the C3-VQA reduces the total heat dissipation at the 4 K stage by 30% and 81% under sequential-shot and parallel-shot execution scenarios, respectively. Furthermore, a case study in quantum chemistry shows that the C3-VQA reduces total heat dissipation by 87% with a 10 000-qubit system.
Scaling superconducting quantum computers to the fault-tolerant regime calls for a commensurate scaling of the classical control and readout stack. Today's systems largely rely on room-temperature, rack-based instrumentation connected to dilution-refrigerator cryostats through many coaxial cables. Looking ahead, superconducting fault-tolerant quantum computers (FTQCs) will likely adopt a heterogeneous quantum-classical architecture that places selected electronics at cryogenic stages -- for example, cryo-CMOS at 4~K and superconducting digital logic at 4~K and/or mK stages -- to curb wiring and thermal-load overheads. This review distills key requirements, surveys representative room-temperature and cryogenic approaches, and provides a transparent first-order accounting framework for cryoelectronics. Using an RSA-2048-scale benchmark as a concrete reference point, we illustrate how scaling targets motivate constraints on multiplexing and stage-wise cryogenic power, and discuss implications for functional partitioning across room-temperature electronics, cryo-CMOS, and superconducting logic.
The variational quantum eigensolver (VQE) is a promising candidate that brings practical benefits from quantum computing. However, the required bandwidth in/out of a cryostat is a limiting factor to scale cryogenic quantum computers. We propose a tailored counter-based module with single flux quantum circuits in 4-K stage which precomputes a part of VQE calculation and reduces the amount of inter-temperature communication. The evaluation shows that our system reduces the required bandwidth by 97%, and with this drastic reduction, total power consumption is reduced by 93% in the case where 277 VQE programs are executed in parallel on a 10000-qubit machine.
The number of bits in quantum computers needs to be increased since large problems must be solved to achieve quantum acceleration. Superconducting qubits are the most advanced qubit devices currently available. A method has been proposed to place a quantum-classical interface on a 4 K stage to ensure scalability. The practical implications of a simple counter circuit in the interface and its role in processing the qubit read results have been demonstrated. A method is needed for configuring a counter circuit with low power consumption to improve scalability. In this paper, we design a novel counter circuit using the Half-Flux Quantum (HFQ) technology. This technology operates in cryogenic environments and has lower power consumption than the Single-Flux Quantum (SFQ) tech-nology. In addition, we conducted a comparative evaluation of circuits dedicated to the NISQ algorithm using SFQ and equivalent circuits implemented using HFQ. Assuming the same power consumption technology applicable to SFQ can be applied to HFQ, we found that the proposed HFQ-based counter circuit can reduce the power consumption by up to 97%.
The digital circuits in a superconducting quantum computer must be cooled to cryogenic temperatures in a dilution refrigerator for control and information readout of the qubit information. Because the dilution refrigerator's heat capacity is limited, extremely low-power digital circuits are required. Single-flux-quantum (SFQ) circuits and Josephson photomultipliers (JPMs) are expected to serve as control and readout circuits for superconducting quantum computers. These circuits generate minimal heat, but further reductions in power consumption are required to make it possible to build larger, more scalable faulttolerant quantum computers (FTQC). In this paper, we propose a low-power and reliable peripheral circuit for JPM-based qubit readout utilizing an SFQ counter circuit. The counter performs majority voting across repeated readouts, significantly improving the reliability of the JPM readout process. Additionally, we quantitatively evaluate switching errors in SFQ circuits using Josephson junctions with low-critical current values. By integrating these circuit techniques and simulation results, we find that the proposed approach achieves a 90% reduction in power consumption while effectively suppressing the increase in readout error.
As superconducting and silicon-spin quantum processors scale from hundreds to thousands of physical qubits, the interconnect bottleneck between room-temperature classical electronics and mK cryogenic quantum processors poses a critical physical and architectural barrier. Low-latency control loops—essential for Quantum Error Correction (QED), fast reset protocols, and adaptive quantum algorithms—are strictly constrained by thermal load budgets, speed-of-light signal latency across thermal stages, and the bandwidth limits of coax lines. This paper presents a detailed architectural framework for next-generation quantum-classical interfaces. We investigate the transition from traditional, room-temperature arbitrary waveform generators (AWGs) connected via coaxial lines to co-integrated, cryo-CMOS, and single-flux-quantum (SFQ) digital-to-analog and digital signal processing control layers operating directly at the 4 K and 20 mK stages. We evaluate thermal transport, power dissipation, signal attenuation, and physical routing constraints, proposing a heterogeneous hybrid-control topology that satisfies latency budgets below 100 ns while remaining within the tight thermal limits of modern dilution refrigerators.