NISQ devices have inherent limitations in terms of connectivity and hardware noise. The synthesis of CNOT circuits considers the physical constraints and transforms quantum algorithms into low-level quantum circuits that can execute on physical chips correctly. In the current trend, quantum chip architectures without Hamiltonian paths are gradually replacing architectures with Hamiltonian paths due to their scalability and low-noise characteristics. To this end, this paper addresses the nearest neighbor synthesis of CNOT circuits in the architectures with and without Hamiltonian paths, aiming to enhance the fidelity of the circuits after execution. Firstly, a key-qubit priority mapping model for general quantum architectures is proposed. Secondly, the initial mapping is further improved by using tabu search to reduce the number of CNOT gates after circuit synthesis and enhance its fidelity. Finally, the noise-aware CNOT circuit nearest neighbor synthesis algorithm for the general architecture is proposed based on the key-qubit priority mapping model. The algorithm is demonstrated on several popular cloud quantum computing platforms and simulators, showing that it effectively optimizes the fidelity of CNOT circuits compared with mainstream methods. Moreover, the method can be extended to more general circuits, thereby improving the overall performance of quantum computing on NISQ devices.
We introduce an improved CNOT synthesis algorithm that considers nearest-neighbour interactions and CNOT gate error rates in noisy intermediate-scale quantum (NISQ) hardware. Compared to IBM's Qiskit compiler, it improves the fidelity of a synthesized CNOT circuit by about 2 times on average (up to 9 times). It lowers the synthesized CNOT count by a factor of 13 on average (up to a factor of 162). Our contribution is twofold. First, we define a
Cost function by approximating the average gate fidelity
Favg. According to the simulation results,
Cost fits the error probability of a noisy CNOT circuit,
Prob=1−Favg, much tighter than the commonly used cost functions. On IBM's fake Nairobi backend, it matches
Prob to within
10−3. On other backends, it fits
Prob to within
10−1.
Cost accurately quantifies the dynamic error characteristics and shows remarkable scalability. Second, we propose a noise-aware CNOT routing algorithm, NAPermRowCol, by adapting the leading Steiner-tree-based connectivity-aware CNOT synthesis algorithms. A weighted edge is used to encode a CNOT gate error rate and
Cost-instructed heuristics are applied to each reduction step. NAPermRowCol does not use ancillary qubits and is not restricted to certain initial qubit maps. Compared with algorithms that are noise-agnostic, it improves the fidelity of a synthesized CNOT circuit across varied NISQ hardware. Depending on the benchmark circuit and the IBM backend selected, it lowers the synthesized CNOT count up to
56.95% compared to ROWCOL and up to
21.62% compared to PermRowCol. It reduces the synthesis
Cost up to
25.71% compared to ROWCOL and up to
9.12% compared to PermRowCol. Our method can be extended to route a more general quantum circuit, giving a powerful new tool for compiling on NISQ devices.
Abstract Current quantum computers are noisy intermediate-scale quantum (NISQ) devices. Execution of quantum algorithms, represented as quantum circuits in the quantum circuit model, on such hardware requires transformation of the original circuits to comply with the hardware’s physical constraints, a process known as transpilation. One of the main constraints is limited qubit connectivity. In this work, we present an algorithm that transforms a quantum hashing circuit to satisfy architectural connectivity constraints while minimizing the number of CNOT gates (CNOT cost). The considered algorithm constructs a mapping from logical qubits to physical qubits that minimizes the CNOT cost of the resulting circuit. We optimize circuits for IBM Quantum devices.
Abstract Currently available quantum computing hardware platforms have limited 2-qubit connectivity among their addressable qubits. In order to run a generic quantum algorithm on such a platform, one has to transform the initial logical quantum circuit describing the algorithm into an equivalent one that obeys the connectivity restrictions. In this work we construct a circuit synthesis scheme that takes as input the qubit connectivity graph and a quantum circuit over the gate set generated by { CNOT , R Z } and outputs a circuit that respects the connectivity of the device. As a concrete application, we apply our techniques to Google’s Bristlecone 72-qubit quantum chip connectivity, IBM’s Tokyo 20-qubit quantum chip connectivity, and Rigetti’s Acorn 19-qubit quantum chip connectivity. In addition, we also compare the performance of our scheme as a function of sparseness of randomly generated quantum circuits, and discuss how to apply our techniques as a subroutine for the more general mapping problem over universal set of gates (Clifford + T).
In the near future of the noisy intermediate-scale quantum (NISQ) era, almost all quantum computing devices will be restricted to a specific fixed qubits connectivity architecture. Thus, the synthesis of quantum circuits with limited connectivity is urgent. We design quantum circuit synthesis algorithms for basic and essential synthesis problems, such as quantum state preparation, general unitary synthesis, and quantum isometries. For any architecture, the controlled not (cnot) count is at most 5/3 times the state-of-the-art result on complete-graph architecture. For some specific architectures, such as square-grid ones, the ratio is reduced to 1.126. The numerical simulation result is confirmatory of theoretical conclusions. Our algorithms significantly reduce by more than
50 additional cnot count compared to mapping algorithms. These algorithms help to implement the larger-scale algorithm in the physics device. Our results illustrate that well-designed synthesis algorithms can mitigate the problem of limited qubit connectivity in the NISQ era and may suggest the design of large-scale quantum devices.
A controlled-not (cnot) circuit is the key gadget for entangling qubits in quantum computing systems. However, the qubit connectivity of noisy intermediate-scale quantum (NISQ) devices is constrained by their limited-connectivity architecture. To improve the performance of cnot circuits on NISQ devices, we investigate the optimization of the size/depth of cnot circuits under the limited-connectivity architecture. We present a method that can optimize the size of any
n-qubit cnot circuit $O(\frac{{n}^{2}}{log\ensuremath{\delta}})$ on any connected graph with minimum degree $\ensuremath{\delta}$, and prove this bound is optimal for the regular graph. For the near-term sparsely connected structure, we additionally present a method that can optimize the size of any
n-qubit cnot circuit to below
2n2. The numerical experiment shows that our method performs better than state-of-the-art results. Specifically, we present an example to illustrate the applicability of our algorithm. For the grid structure, which is commonly used in current quantum devices, we demonstrate that the depth of any
n-qubit cnot circuit can be optimized to be linear in
n with certain ancillary qubits (ancillas). Experimental results indicate that this method has significant improvements compared with all of the existing methods. We additionally test our algorithms on the five-qubit IBMQ devices, and the experiments show that the measurement results of the optimized circuit with our algorithm are more robust to noise compared with the IBM mapping method.
It is natural to assume that we can perform quantum operations between only two adjacent physical qubits (quantum bits) to realize a quantum computer for both the current and possible future technologies. This restriction is called the Nearest Neighbor Architecture (NNA) restriction. This paper proposes an SMT-solver-based synthesis of quantum circuits consisting of CNOT, H, and T gates to satisfy the NNA restriction. Although the existing SMT-solver-based synthesis cannot treat H and T gates directly, our method treats the functionality of quantum-specific T and H gates carefully so that we can utilize an SMT-solver to minimize the number of CNOT gates; unlike the existing SMT-solver-based methods, our method considers "Don't Care" conditions in intermediate points of a quantum circuit by exploiting the property of T gates to reduce CNOT gates. Experimental results show that our approach can reduce the number of CNOT gates by 58.11% on average compared to the naive application of the existing method which does not consider the "Don't Care" condition.