Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2309.13927 · Physical Review A

ZZ -interaction-free single-qubit-gate optimization in superconducting qubits

Shu Watanabe, Yutaka Tabuchi, Kentaro Heya, Shuhei Tamate, Yasunobu Nakamura

Published Jan 18, 2024• 16 citations
arXivHTMLPDF

Abstract

Overcoming the issue of qubit-frequency fluctuations is essential to realizing stable and practical quantum computing with solid-state qubits. Static $ZZ$ interaction, which causes a frequency shift of a qubit depending on the state of neighboring qubits, is one of the major obstacles to integrating fixed-frequency transmon qubits. Here we propose and experimentally demonstrate $ZZ$-interaction-free single-qubit-gate operations on a superconducting transmon qubit by utilizing a semianalytically optimized pulse based on a perturbative analysis. The gate is designed to be robust against slow qubit-frequency fluctuations. The robustness of the optimized gate spans a few megahertz, which is sufficient to suppress the adverse effects of the $ZZ$ interaction. Our result paves the way for an efficient approach to overcoming the issue of $ZZ$ interaction without any additional hardware overhead.

DOI
10.1103/physreva.109.012616

Related papers

High-Contrast Z Z Interaction Using Superconducting Qubits with Opposite-Sign Anharmonicity

Peng Zhao, Peng Xu, Dong Lan +4 more

For building a scalable quantum processor with superconducting qubits, ZZ interaction is of great concern because its residual has a crucial impact to two-qubit gate fidelity. Two-qubit gates with fidelity meeting the criterion of fault-tolerant quantum computation have been demonstrated using ZZ interaction. However, as the performance of quantum processors improves, the residual static ZZ can become a performance-limiting factor for quantum gate operation and quantum error correction. Here, we introduce a superconducting architecture using qubits with opposite-sign anharmonicity, a transmon qubit, and a C-shunt flux qubit, to address this issue. We theoretically demonstrate that by coupling the two types of qubits, the high-contrast ZZ interaction can be realized. Thus, we can control the interaction with a high on-off ratio to implement two-qubit controlled-Z gates, or suppress it during two-qubit gate operation using XY interaction (e.g., an iSWAP gate). The proposed architecture can also be scaled up to multiqubit cases. In a fixed coupled system, ZZ crosstalk related to neighboring spectator qubits could also be heavily suppressed.

arXiv:2002.07560•Physical Review Letters•Nov 11, 2020•100 citations

Superconducting Qubit Gates Robust to Parameter Fluctuations

Emily Wright, Leo Van Damme, Niklas J. Glaser +14 more

State-of-the-art single-qubit gates on superconducting transmon qubits can achieve the fidelities required for error-corrected computations. However, parameter fluctuations due to qubit instabilities, environmental changes, and control inaccuracies make it difficult to maintain this performance. To mitigate the effects of these parameter variations, we numerically derive gates robust to amplitude and frequency errors using gradient ascent pulse engineering (GRAPE). We analyze how fluctuations in qubit frequency, drive amplitude, and coherence affect gate performance over time. The robust pulses suppress coherent errors from drive amplitude drifts over 15 times more than a Gaussian pulse with derivative removal by adiabatic gate (DRAG) corrections. Furthermore, the robust gates, originally designed to compensate for quasi-static errors, also demonstrate resilience to stochastic, time-dependent noise, which is reflected in the dephasing time. They suppress added errors during increases in dephasing by up to 1.7 times more than DRAG.

quant-pharXiv:2511.22580•Physical Review Applied•Nov 28, 2025•4 citations

A universal quantum gate set for transmon qubits with strong ZZ interactions

Junling Long, Tongyu Zhao, Mustafa Bal +13 more

High-fidelity single- and two-qubit gates are essential building blocks for a fault-tolerant quantum computer. While there has been much progress in suppressing single-qubit gate errors in superconducting qubit systems, two-qubit gates still suffer from error rates that are orders of magnitude higher. One limiting factor is the residual ZZ-interaction, which originates from a coupling between computational states and higher-energy states. While this interaction is usually viewed as a nuisance, here we experimentally demonstrate that it can be exploited to produce a universal set of fast single- and two-qubit entangling gates in a coupled transmon qubit system. To implement arbitrary single-qubit rotations, we design a new protocol called the two-axis gate that is based on a three-part composite pulse. It rotates a single qubit independently of the state of the other qubit despite the strong ZZ-coupling. We achieve single-qubit gate fidelities as high as 99.1% from randomized benchmarking measurements. We then demonstrate both a CZ gate and a CNOT gate. Because the system has a strong ZZ-interaction, a CZ gate can be achieved by letting the system freely evolve for a gate time $t_g=53.8$ ns. To design the CNOT gate, we utilize an analytical microwave pulse shape based on the SWIPHT protocol for realizing fast, low-leakage gates. We obtain fidelities of 94.6% and 97.8% for the CNOT and CZ gates respectively from quantum progress tomography.

arXiv:2103.12305•Mar 23, 2021•32 citations

Hardware-Efficient Microwave-Activated Tunable Coupling between Superconducting Qubits

Bradley K. Mitchell, Ravi Naik, Alexis Morvan +7 more

Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off resonantly. We show tunable coupling over 1 order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave cross talk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.

arXiv:2105.05384•Physical Review Letters•Nov 9, 2021•85 citations

Comprehensive explanation of ZZ coupling in superconducting qubits

Simon Pettersson Fors, Jorge Fernández-Pendás, Anton Frisk Kockum

A major challenge for scaling up superconducting quantum computers is unwanted couplings between qubits, which lead to always-on ZZ couplings that impact gate fidelities by shifting energy levels conditional on qubit states. To tackle this challenge, we introduce analytical and numerical techniques, including a diagrammatic perturbation theory and a state-assignment algorithm. Together, these tools enable us to explain the emergence of ZZ coupling in three linked pictures, where each picture tells us more about the underlying mechanisms creating the ZZ coupling. These pictures generalize previous efforts, which focused on specific setups and a single mechanism. The deeper understanding that we provide of the mechanisms behind the ZZ coupling facilitate finding parameter regions of weak and strong ZZ coupling. We showcase our techniques for a system consisting of two fixed-frequency transmon qubits connected by a flux-tunable transmon coupler. There, we find three types of parameter regions with zero or near-zero ZZ coupling, all of which are accessible with current technology. We furthermore find regions of strong ZZ coupling nearby, which may be used to implement adiabatic controlled-phase gates and quantum simulations. Our framework is applicable to many types of qubits and opens up for the design of large-scale quantum computers with improved gate fidelities.

arXiv:2408.15402•Aug 27, 2024•39 citations

Fast Z Z -free entangling gates for superconducting qubits assisted by a driven resonator

Ziwen Huang, Tae-Yoon Kim, Tanay Roy +4 more

Engineering high-fidelity two-qubit gates is an indispensable step toward practical quantum computing. For superconducting quantum platforms, one important setback is the stray interaction between qubits, which causes significant coherent errors. For transmon qubits, protocols for mitigating such errors usually involve fine-tuning the hardware parameters or introducing usually noisy flux-tunable couplers. In this work, we propose a simple scheme to cancel these stray interactions. The coupler used for such cancelation is a driven high-coherence resonator, where the amplitude and frequency of the drive serve as control knobs. Through the resonator-induced-phase interaction, the static $ZZ$ coupling can be entirely neutralized. We numerically show that such a scheme can enable short and high-fidelity entangling gates, including cross-resonance controlled-not (cnot) gates within 40 ns and adiabatic controlled-$Z$ gates within 140 ns. Our architecture is not only $ZZ$-free, but also contains no extra noisy components, such that it preserves the coherence times of fixed-frequency transmon qubits. With the state-of-the-art coherence times, the error of our cross-resonance cnot gate can be reduced to below ${10}^{\ensuremath{-}4}$.

arXiv:2311.01332•Physical Review Applied•Sep 4, 2024•8 citations
Overcoming the issue of qubit-frequency fluctuations is essential to realizing stable and practical quantum computing with solid-state qubits. Static ZZZZZZ interaction, which causes a frequency shift of a qubit depending on the state of neighboring qubits, is one of the major obstacles to integrating fixed-frequency transmon qubits. Here we propose and experimentally demonstrate ZZZZZZ-interaction-free single-qubit-gate operations on a superconducting transmon qubit by utilizing a semianalytically optimized pulse based on a perturbative analysis. The gate is designed to be robust against slow qubit-frequency fluctuations. The robustness of the optimized gate spans a few megahertz, which is sufficient to suppress the adverse effects of the ZZZZZZ interaction. Our result paves the way for an efficient approach to overcoming the issue of ZZZZZZ interaction without any additional hardware overhead.
For building a scalable quantum processor with superconducting qubits, ZZ interaction is of great concern because its residual has a crucial impact to two-qubit gate fidelity. Two-qubit gates with fidelity meeting the criterion of fault-tolerant quantum computation have been demonstrated using ZZ interaction. However, as the performance of quantum processors improves, the residual static ZZ can become a performance-limiting factor for quantum gate operation and quantum error correction. Here, we introduce a superconducting architecture using qubits with opposite-sign anharmonicity, a transmon qubit, and a C-shunt flux qubit, to address this issue. We theoretically demonstrate that by coupling the two types of qubits, the high-contrast ZZ interaction can be realized. Thus, we can control the interaction with a high on-off ratio to implement two-qubit controlled-Z gates, or suppress it during two-qubit gate operation using XY interaction (e.g., an iSWAP gate). The proposed architecture can also be scaled up to multiqubit cases. In a fixed coupled system, ZZ crosstalk related to neighboring spectator qubits could also be heavily suppressed.
State-of-the-art single-qubit gates on superconducting transmon qubits can achieve the fidelities required for error-corrected computations. However, parameter fluctuations due to qubit instabilities, environmental changes, and control inaccuracies make it difficult to maintain this performance. To mitigate the effects of these parameter variations, we numerically derive gates robust to amplitude and frequency errors using gradient ascent pulse engineering (GRAPE). We analyze how fluctuations in qubit frequency, drive amplitude, and coherence affect gate performance over time. The robust pulses suppress coherent errors from drive amplitude drifts over 15 times more than a Gaussian pulse with derivative removal by adiabatic gate (DRAG) corrections. Furthermore, the robust gates, originally designed to compensate for quasi-static errors, also demonstrate resilience to stochastic, time-dependent noise, which is reflected in the dephasing time. They suppress added errors during increases in dephasing by up to 1.7 times more than DRAG.
High-fidelity single- and two-qubit gates are essential building blocks for a fault-tolerant quantum computer. While there has been much progress in suppressing single-qubit gate errors in superconducting qubit systems, two-qubit gates still suffer from error rates that are orders of magnitude higher. One limiting factor is the residual ZZ-interaction, which originates from a coupling between computational states and higher-energy states. While this interaction is usually viewed as a nuisance, here we experimentally demonstrate that it can be exploited to produce a universal set of fast single- and two-qubit entangling gates in a coupled transmon qubit system. To implement arbitrary single-qubit rotations, we design a new protocol called the two-axis gate that is based on a three-part composite pulse. It rotates a single qubit independently of the state of the other qubit despite the strong ZZ-coupling. We achieve single-qubit gate fidelities as high as 99.1% from randomized benchmarking measurements. We then demonstrate both a CZ gate and a CNOT gate. Because the system has a strong ZZ-interaction, a CZ gate can be achieved by letting the system freely evolve for a gate time tg=53.8t_g=53.8tg​=53.8 ns. To design the CNOT gate, we utilize an analytical microwave pulse shape based on the SWIPHT protocol for realizing fast, low-leakage gates. We obtain fidelities of 94.6% and 97.8% for the CNOT and CZ gates respectively from quantum progress tomography.
Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off resonantly. We show tunable coupling over 1 order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave cross talk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.
A major challenge for scaling up superconducting quantum computers is unwanted couplings between qubits, which lead to always-on ZZ couplings that impact gate fidelities by shifting energy levels conditional on qubit states. To tackle this challenge, we introduce analytical and numerical techniques, including a diagrammatic perturbation theory and a state-assignment algorithm. Together, these tools enable us to explain the emergence of ZZ coupling in three linked pictures, where each picture tells us more about the underlying mechanisms creating the ZZ coupling. These pictures generalize previous efforts, which focused on specific setups and a single mechanism. The deeper understanding that we provide of the mechanisms behind the ZZ coupling facilitate finding parameter regions of weak and strong ZZ coupling. We showcase our techniques for a system consisting of two fixed-frequency transmon qubits connected by a flux-tunable transmon coupler. There, we find three types of parameter regions with zero or near-zero ZZ coupling, all of which are accessible with current technology. We furthermore find regions of strong ZZ coupling nearby, which may be used to implement adiabatic controlled-phase gates and quantum simulations. Our framework is applicable to many types of qubits and opens up for the design of large-scale quantum computers with improved gate fidelities.
Engineering high-fidelity two-qubit gates is an indispensable step toward practical quantum computing. For superconducting quantum platforms, one important setback is the stray interaction between qubits, which causes significant coherent errors. For transmon qubits, protocols for mitigating such errors usually involve fine-tuning the hardware parameters or introducing usually noisy flux-tunable couplers. In this work, we propose a simple scheme to cancel these stray interactions. The coupler used for such cancelation is a driven high-coherence resonator, where the amplitude and frequency of the drive serve as control knobs. Through the resonator-induced-phase interaction, the static ZZZZZZ coupling can be entirely neutralized. We numerically show that such a scheme can enable short and high-fidelity entangling gates, including cross-resonance controlled-not (cnot) gates within 40 ns and adiabatic controlled-ZZZ gates within 140 ns. Our architecture is not only ZZZZZZ-free, but also contains no extra noisy components, such that it preserves the coherence times of fixed-frequency transmon qubits. With the state-of-the-art coherence times, the error of our cross-resonance cnot gate can be reduced to below ${10}^{\ensuremath{-}4}$.