This paper discusses the possibility of using two-mode squeezed light to improve the performance of existing sensor technology with the focus on its miniaturization under realistic losses. Therefore, we analyze a system consisting of a part for two-mode squeezed light generation, a sensor region, and a detection stage. Based on a general four-wave mixing (FWM) Hamiltonian caused by third-order susceptibility, we formulate linearized equations that describe the FWM process below the threshold and are used to analyze the squeezing quality of the generated optical signal and idler modes. For a possible realization, the focus is set on chip-integrated generation using microring resonators. To do so, the impacts of the design and the pump light are considered in the derived equations. These equations are used to analyze the usage of two-mode squeezed light in quantum metrology and the application in a Mach-Zehnder interferometer. Due to the impact of losses in realistic use cases, we show that the main usage is for small and compact devices, which can lead to a quantum improvement of up to a factor of 10 in comparison with using coherent light only. This enables the use of small squeezing-enhanced sensors with a performance comparable to larger classical sensors.
This paper discusses the possibility of using two-mode squeezed light to improve the performance of existing sensor technology with the focus on its miniaturization under realistic losses. Therefore, we analyze a system consisting of a part for two-mode squeezed light generation, a sensor region, and a detection stage. Based on a general four-wave mixing (FWM) Hamiltonian caused by third-order susceptibility, we formulate linearized equations that describe the FWM process below the threshold and are used to analyze the squeezing quality of the generated optical signal and idler modes. For a possible realization, the focus is set on chip-integrated generation using microring resonators. To do so, the impacts of the design and the pump light are considered in the derived equations. These equations are used to analyze the usage of two-mode squeezed light in quantum metrology and the application in a Mach-Zehnder interferometer. Due to the impact of losses in realistic use cases, we show that the main usage is for small and compact devices, which can lead to a quantum improvement of up to a factor of 10 in comparison with using coherent light only. This enables the use of small squeezing-enhanced sensors with a performance comparable to larger classical sensors.
The fiber optic Sagnac interferometer can measure the rotation rate of a system with a high sensitivity. However, they require a large sensor area, which leads to a huge footprint and size compared with their micro-electromechanical systems (MEMS) counterpart. Consequently, the performance decreases when using chip-integrated Sagnac interferometers with small sensor areas. In this letter, we address this issue and present a method to improve the sensitivity at a small scale. Therefore, we utilize two-mode squeezed light that can be generated in a ring resonator via four-wave mixing, which can have a very low noise. We show that the combination of classical coherent light and squeezed light can improve the sensor performance compared with a classical fiber optic Sagnac interferometer. For this purpose, we discuss two different configurations that are suited for various applications. The first one makes use of the low noise of squeezed light and is suited for small- and low-loss systems using intensity difference measurements, while the second one measures the variance of squeezed light via product detection and is suited for larger and lossy systems.
Squeezed light constitutes a key resource for quantum optical technologies including quantum sensing, computing, communication and metrology. For many applications the generation of squeezed light typically requires at least two nonlinear optical stages involving careful phase and frequency matching to achieve the required mixing of squeezed and coherent light. In our work, we introduce an on-chip system that simplifies the generation of coherent-squeezed light, utilizing only a single squeezing stage. We achieve this by pumping a silicon nitride (Si3N4) microring resonator to produce single-mode squeezed light through four-wave mixing at the same frequency as the pump mode, leveraging the inherent χ(3)-nonlinearity of the Si3N4 resonator. Our on-chip system demonstrates a squeezing of -4.7 dB with a clear perspective towards -10 dB squeezing. We also provide a theoretical model that describes the straightforward yet robust generation of single-mode squeezing at the injection locking point of the ring resonator. In fact, we show that a design with a normal dispersion can be used for robust generation of bright squeezed light without the need for careful suppression of unwanted nonlinear processes. Overall, our findings highlight an approach which drastically simplifies the generation of coherent-squeezed light in photonic integrated circuits.
Integration of quantum optical technique on-chip is crucial for large scale applications of quantum technology, which were proven in a free space environment to be superior to the corresponding classical technology. Squeezed states of light can be used for enhancing the sensitivity of quantum sensors and for fault-tolerant quantum computing. Although chip-based squeezed light generation has advanced significantly, practical impact remains limited because coupling losses between the chip and off-chip detectors destroy delicate quantum correlations, restricting the amount of observed squeezing. Here, we overcome this limitation by implementing the idea of on-chip quantum measurement with the aid of a parametric amplifier and applying it to the squeezed state generated by a silicon nitride (SiN) microring resonator. In our scheme, two matched SiN micro-rings are sequentially constructed. The first ring generates a squeezed state, whereas the second ring acts as a high-gain parametric amplifier (PA) that measures the squeezed state before the light experiences significant off-chip loss. This architecture is inherently loss-tolerant: the amplifier elevates the quantum noise well above the vacuum level, making the measurement insensitive to downstream losses. We directly observe a quantum noise reduction of 4.6 dB from the first ring, despite a chip-to-fiber coupling loss exceeding 5 dB. This work also demonstrates the first monolithic SU(1,1) interferometer with an estimated 5 dB signal-to-noise enhancement compared to traditional linear interferometers, and thus establishes a practical pathway for chip-based quantum sensors.
Squeezed light is an essential nonclassical resource for quantum sensing, continuous-variable quantum information processing, low-noise optical communication, and new photonic computing systems. However, to make practical use of it, we need compact, low-power squeezed-light sources that can fit on a chip. In this work, we introduce a theoretical model of a dual-pump microring optical parametric amplifier for squeezed-light integrated photonics. The model outlines cavity-enhanced Kerr four-wave mixing among two pump fields, a signal mode, and the conjugate idler sideband. We use a linearized quantum Langevin approach under the undepleted-pump assumption. We derive the frequency-domain inputoutput relation and assess the output quadrature noise based on several factors: external coupling rate, intrinsic loss, pump power, signal detuning, nonlinear coefficient, and dispersion. First, we analyze a dispersion-engineered silicon nitride microring that operates in the telecom band. It shows that moderate external coupling offers the best trade-off between intracavity field enhancement and squeezed-field extraction. With the right pump detuning, the simulated silicon nitride resonator achieves over 10 dB of quadrature noise reduction at milliwatt-level input pump powers. We also compare AlGaAs and InP microring platforms, demonstrating that the squeezing performance is influenced not only by the nonlinear coefficient but also by the combined effects of material nonlinearity, cavity quality factor, loss, coupling, dispersion, and detuning. This framework gives design guidelines for low-power, chip-scale squeezed-light sources aimed at future quantum and AI-oriented photonic integrated circuits.
Squeezed states, with their noise reduction below the standard quantum limit, are promising quantum states of light exploited for enhancing sensitivity in quantum sensing or as carriers of information in continuous variable quantum computing and communication. To make use of their quantum advantage, the main common challenge in generating these states is achieving high levels of squeezing in low loss setups.Over the years, several bulk optical nonlinear crystals and cavities have been employed for the generation of different types of high-quality squeezed states. However, recent progress in fabricating ultra-low loss integrated waveguides has shifted the interest of the community towards the integration of squeezing sources to gain advantages in terms of compactness, scalability, and reproducibility.The aim of this thesis is to investigate the main characteristics, limits, and requirements for the generation of vacuum and bright squeezed states by second- and third-order nonlinear devices, with more emphasis on integrated cavities. In particular, we demonstrate high on-chip intensity difference squeezing between bright mode pairs created in an engineered SiN microring resonator. In addition, we propose the use of the Ikeda map, a semi-classical simulation tool, for the investigation of two-mode quadrature squeezing generation in microresonators, discussing its competitiveness against standard quantum models. These results contribute to the optimization of engineered integrated devices with the aim of attaining high levels of squeezing sufficient to bring real advantages in classical and quantum applications.