Capacitive crosstalk in gate-based dispersive sensing of spin qubits
Eoin G. Kelly, Alexei Orekhov, Nico W. Hendrickx, Matthias Mergenthaler, Felix J. Schupp, Stephan Paredes, Rafael S. Eggli, Andreas V. Kuhlmann, Patrick Harvey-Collard, Andreas Fuhrer, Gian Salis
In gate-based dispersive sensing, the response of a resonator attached to a quantum dot gate is detected by a reflected radio frequency signal. This enables fast readout of spin qubits and tune up of arrays of quantum dots but comes at the expense of increased susceptibility to crosstalk, as the resonator can amplify spurious signals and induce fluctuations in the quantum dot potential. We attach tank circuits with superconducting NbN inductors and internal quality factors Qi>1000 to the interdot barrier gate of silicon double quantum dot devices. Measuring the interdot transition in transport, we quantify radio frequency crosstalk that results in a ring-up of the resonator when neighboring plunger gates are driven with frequency components matching the resonator frequency. This effect complicates qubit operation and scales with the loaded quality factor of the resonator, the mutual capacitance between device gate electrodes, and with the inverse of the parasitic capacitance to ground. Setting qubit frequencies below the resonator frequency is expected to substantially suppress this type of crosstalk.
In gate-based dispersive sensing, the response of a resonator attached to a quantum dot gate is detected by a reflected radio frequency signal. This enables fast readout of spin qubits and tune up of arrays of quantum dots but comes at the expense of increased susceptibility to crosstalk, as the resonator can amplify spurious signals and induce fluctuations in the quantum dot potential. We attach tank circuits with superconducting NbN inductors and internal quality factors Qi>1000 to the interdot barrier gate of silicon double quantum dot devices. Measuring the interdot transition in transport, we quantify radio frequency crosstalk that results in a ring-up of the resonator when neighboring plunger gates are driven with frequency components matching the resonator frequency. This effect complicates qubit operation and scales with the loaded quality factor of the resonator, the mutual capacitance between device gate electrodes, and with the inverse of the parasitic capacitance to ground. Setting qubit frequencies below the resonator frequency is expected to substantially suppress this type of crosstalk.
Spin qubits in gate-defined semiconductor quantum dots are a promising platform for realising a scalable quantum computer. This platform encodes quantum information into the intrinsic angular momentum (spin) of individual electrons or holes. In particular, hole spins in quantum dots enable the possibility of all-electrical spin control due to their intrinsic spin-orbit coupling. One important criterion of a quantum computer is the ability to reliably read out the state of the qubit. This is done by mapping spin information to the charge degree of freedom, combined with a method for charge detection. Charge detection can be facilitated by coupling a resonator directly to the quantum dot gate or to a charge sensor and measuring the resonator's phase or amplitude response. In this thesis, we describe a set of experiments relating to the implementation of hole spin qubit readout with superconducting resonators. First, we study gate-based charge sensing in a Si fin field-effect transistor (finFET) device using a superconducting NbN nanowire resonator. We find that the resonator amplifies capacitive crosstalk when electrical control pulses are applied to gate electrodes in this device. This occurs whenever a spectral component of qubit control pulses overlaps with the resonance frequency, which we show may occur for both baseband and radio-frequency (RF) drive signals. We quantify this crosstalk in a transport-based method, and attribute its source to the capacitance between the bondpads of neighbouring gate electrodes. In a second experiment, we use an RF charge sensor with the same nanowire technology to read out hole spin qubits formed in the quantum well of a Ge/SiGe heterostructure. A screening layer approach is used to facilitate RF matching due to large RF dissipation found in the heterostructure. We implement a double-latched readout scheme in this system to reduce errors arising from both spin and charge decay during readout. The spin-to-charge conversion process and its dependence on magnetic field orientation is studied. Spin and charge decay processes arising after spin-to-charge conversion are mitigated by choosing an optimal working point for the field orientation, field amplitude and readout pulse times. By doing so, we achieve an average single-shot state-preparation-and-measurement fidelity of 97%, primarily bounded by imperfect state preparation and limited signal-to-noise ratio. Finally, we study coplanar waveguide resonators fabricated from NbN. We investigate the feasibility of integrating this type of resonator onto the same chip as the Si finFET quantum dots. We then develop a novel resonator readout technique by the interference of two microwave sidebands. We demonstrate the insensitivity of this technique to common-mode phase and amplitude noise both theoretically and experimentally. This technique is then used to study resonator noise arising from two-level system defects. These results highlight both the practical constraints and the potential for achieving high readout fidelities using resonator-based hole spin qubit readout. This work establishes a blueprint for mitigating resonator-induced crosstalk and enabling high-fidelity readout in lossy materials by incorporating a screening layer.
Building a practical quantum processor involves integrating millions of physical qubits along with the necessary components for individual qubit manipulation and readout. Arrays of gated silicon spins offer a promising route toward achieving this goal. Optimized radio frequency resonators with high internal quality factor are based on superconducting inductors and enable fast spin readout. All-electrical spin control and gate-dispersive readout remove the need for additional device components and simplify scaling. However, superconducting high-Q tank circuits are susceptible to crosstalk-induced ringup from electrical qubit control pulses, which causes fluctuations of the quantum dot potential and is suspected to degrade qubit performance. Here, we report on the coherent and all-electrical control of a hole spin qubit at 1.5 K , integrated into a silicon fin field-effect transistor and connected to a niobium nitride nanowire inductor gate-sensor. Our experiments show that qubit control pulses with their broad range of higher harmonics ring up the tank when the control pulse spectrum overlaps with the tank resonance. This can cause a reduction of the readout visibility if the tank ringing amplitude exceeds the excited state splitting of the quantum dot, lifting Pauli spin blockade and thus leading to state preparation and measurement errors. We demonstrate how to circumvent these effects by engineering control pulses around the tank resonances. Importantly, we find that the ringup does not limit the spin coherence time, indicating that efficient high-Q resonators in gate-sensing are compatible with all-electrical spin control.
Spin and topological-qubit based quantum computers require an easily scalable and highly sensitive method for readout and manipulation, for which Dispersive Gate Sensing (DGS) is a promising candidate [1, 2]. DGS enables sensing of single electron tunneling events in a mesoscopic system by measuring a reflected Radio Frequency (RF) signal from a resonator capacitively coupled to one of the system’s gate electrodes. From the resonator’s perspective, the system is modeled as an effective ‘parametric capacitance’ [3]. Motivated by its viability for qubit readout and control, we measure transport characteristics of a semiconducting-superconducting hybrid charge island system using this method. Doing so, we observe a spin degeneracy modulation of interdot tunnel couplings resulting from hybridization of a dot orbital with a subgap state of the superconductor, measured entirely within Coulomb blockade. Without DC measurement, we also track a subgap state’s energy via voltage intervals between island charge states as a function of field. Subsequently, we attempt to correlate changes in the resonator’s internal dissipation with coherence of tunneling into the superconducting island. In particular, we collapse a superconducting island’s lowest energy state to the Fermi level by applying a magnetic field. Contrary to expectations, internal dissipation in the resonator did not change dramatically with field, in fact decreasing at charge degeneracy points at all field strengths. We corroborate measurements with existing theory, augmented by simple analytical and numerical models demonstrating that coherence factors of superconducting quasiparticle states and the degeneracy of dot orbitals modulate parametric capacitance. A master equation model of finite temperature interdot tunneling is solved, agreeing with experimental evidence that Sisyphus dissipation is negligible when a dot orbital is hybridized with multiple independent quasiparticle states. To be employed in quantum computers, a full understanding of all phenomena contributing to a DGS signal in these hybrid systems is critical. Hence, these results mark a step towards unambiguous readout of Majorana parity in topological qubits [4].
This thesis focuses on implementing radio frequency (rf) reflectometry techniques for dispersive detection of charge and spin dynamics in nanoscale devices. I have investigated three aspects of rf reflectometry using state-of-the-art silicon (Si) complementary metal-oxide-semiconductor (CMOS) nanowire field effect transistors (NWFETs). First, a high-sensitivity capacitive gate-based charge sensor is developed by optimising the external matching circuit to detect capacitive changes in the high frequency resonator. A new circuit topology is used where superconducting niobium nitride (NbN) inductor is connected in parallel with a single-gate Si NWFET resulting in resonators with loaded Q-factors in the 400-800 range. For a resonator operating at 330 MHz, I have achieved a charge sensitivity of 7.7 μe/Hz and, when operating at 616 MHz, I get 1.3 μe/Hz. This gate-based sensor can be used for fast, accurate and scalable techniques for quantum state readout in Si CMOS based quantum computing. Second, this new circuit topology for the resonator is used with a dual-gate Si NWFET. This dual-gate device geometry provides access to a double quantum dot (DQD) system in few electron regime. The spin-state of the two-electron DQD system is detected dispersively using Pauli spin blockade between joint singlet S(2,0) and triplet T−(1,1) states in a finite magnetic field B. The singlet-triplet relaxation time T1 at B=4.5~T is measured to be $\sim$1 ms using standard homodyne detection technique. Third, I expand the range of applications of gate-based sensing to accurate temperature measurements. I have experimentally demonstrated a primary thermometer by embedding a single-gate Si NWFET with the rf capacitive gate-based sensor. The thermometer, termed as gate-based electron thermometer (GET), relies on cyclic electron tunneling between discrete energy levels of a quantum dot and a single electron reservoir in the NWFET. I have found that the full-width-half-maximum (FWHM) of the resonator phase response depends linearly with temperature via well known physical law by using the ratio kB/e between the Boltzmann constant and the electron charge. The GET is also found to be magnetic field independent like other primary thermometers such as Coulomb blockade and shot noise thermometers.
We demonstrate a low loss, chip-level frequency multiplexing scheme for readout of scaled-up spin qubit devices. By integrating separate bias tees and resonator circuits on-chip for each readout channel, we realise dispersive gate-sensing in combination with charge detection based on two radio frequency quantum point contacts. We apply this approach to perform multiplexed readout of a double quantum dot in the few-electron regime and further demonstrate operation of a 10-channel multiplexing device. Limitations for scaling spin qubit readout to large numbers of multiplexed channels are discussed.
Hybrid circuit quantum electrodynamics (cQED) aims at coupling various quantum degrees of freedom, among which are spin and charge degrees of freedom in gate defined quantum dots, phonons or magnons... with quantized electromagnetic fields in superconducting microwave cavities to investigate fundamental physics questions or for quantum computation and simulation. However, low microwave losses, key for many hybrid cQED experiments, are challenging to achieve given the often exotic and/or complex material stacks (e.g. semiconducting material, ferromagnets, or piezoelectric materials) required to host the various quantum degrees of freedom. In this work, we present a 3D-integration process to overcome this challenge for semi-industrial silicon MOS spin qubits. The process is based on dense indium bump interconnects at a pitch of 10 μm and superconducting thin films of Niobium Nitride (NbN). First, we report on DC and RF interconnect properties that demonstrate a high galvanic interconnection yield and internal quality factors above 105 in the single photon regime for NbN resonators interrupted by a single indium bump interconnect. Eventually, we fabricated a 3D-integrated hybrid circuit quantum electrodynamics (cQED) device based on a semi-industrial MOS hole double quantum dot and a high impedance NbN resonator. For this device, we report a cavity internal quality factor above 10000 and demonstrate record sensitivity for gate-based dispersive readout of the charge degree of freedom with an SNR of 100 in 300 ns. Finally, we demonstrate strong spin-photon coupling of gs/2π = 75 MHz, which highlights the viability of 3D-integration for quantum dot based hybrid spin circuit quantum electrodynamics and opens to high-fidelity spin readout and microwave photon-based remote spin qubit entanglement.