Quantum error correction (QEC) is a way to protect quantum information against noise. It consists of encoding input information into entangled quantum states known as the code space. Furthermore, to classify if the encoded information is corrupted or intact, a step known as syndrome detection is performed. For stabilizer codes, this step consists of measuring a set of stabilizer operators. In this paper, inspired by the QEC approach, and specifically stabilizer codes, we propose a prototype quantum circuit model for classification of classical data. The core quantum circuit can be considered as a quantum perceptron where the classification is based on syndrome detection. In this proposal, a quantum perceptron is realized by one stabilizer as part of a stabilizer code, while a quantum neural network (QNN) layer is realized by a stabilizer code which consists of many stabilizers. The concatenation of stabilizer codes results in complex QNNs. The QNN is trained by performing measurements and optimization of a set of parametrized stabilizers. We demonstrate the concept numerically. In this paper we also consider the first challenge to most applications of quantum computers, including data classification, which is to load data into the memory of the quantum computer. This loading amounts to representing the data as a quantum state, i.e., quantum state preparation. An exact amplitude encoding algorithm requires a circuit of exponential depth. We introduce an alternative recursive algorithm which approximates amplitude encoding with only a polynomial number of elementary gates. We name it the recursive approximate-scheme algorithm.
Quantum error correction (QEC) is a way to protect quantum information against noise. It consists of encoding input information into entangled quantum states known as the code space. Furthermore, to classify if the encoded information is corrupted or intact, a step known as syndrome detection is performed. For stabilizer codes, this step consists of measuring a set of stabilizer operators. In this paper, inspired by the QEC approach, and specifically stabilizer codes, we propose a prototype quantum circuit model for classification of classical data. The core quantum circuit can be considered as a quantum perceptron where the classification is based on syndrome detection. In this proposal, a quantum perceptron is realized by one stabilizer as part of a stabilizer code, while a quantum neural network (QNN) layer is realized by a stabilizer code which consists of many stabilizers. The concatenation of stabilizer codes results in complex QNNs. The QNN is trained by performing measurements and optimization of a set of parametrized stabilizers. We demonstrate the concept numerically. In this paper we also consider the first challenge to most applications of quantum computers, including data classification, which is to load data into the memory of the quantum computer. This loading amounts to representing the data as a quantum state, i.e., quantum state preparation. An exact amplitude encoding algorithm requires a circuit of exponential depth. We introduce an alternative recursive algorithm which approximates amplitude encoding with only a polynomial number of elementary gates. We name it the recursive approximate-scheme algorithm.
Quantum information science is a rapidly growing research area. It concerns information theory that makes use of quantum nature of the microscopic world. In reality, quantum systems are vulnerable to disturbance from an external environment, which can lead to decoherence in the system. Thus, the system must be protected from the environmental noise to keep information stored in the quantum registers. In order to realize a working quantum computer and dependable quantum information processing, researchers and engineers have to overcome this difficulty. One of the most promising candidates for overcoming decoherence is Quantum Error Correction. The idea of quantum error correction is to protect quantum information from errors due to decoherence and other quantum noise during the transmission of information in quantum channels. One fundamental question of quantum error correction is the existence of quantum error correcting code for a noisy quantum system. Moreover, constructing practical and operational quantum error correcting schemes in actual quantum computing is of great interest to quantum information scientists. In this thesis, stabilizer codes and a scheme for constructing recovery channels without error syndrome detection are studied. The motivation for construction of recovery channel without error syndrome detection is also given. We first review some basic concepts on stabilizer groups and stabilizer codes. In particular, we consider theories and principles involved in the construction of encoding circuits from the generators of stabilizer group, and propose a new procedure to derive recovery channel for a well known quantum code, the [n, k, d] code. First, an algorithm to obtain the generators for a stabilizer code and the corresponding computational basis codewords defined in terms of Pauli operators are reviewed and illustrated in detail. Examples are given to demonstrate the relation between the X- and Z- matrices of generators of stabilizer group and the corresponding encoding circuit. Then based on the general framework of operator quantum error correction, we provide a general scheme on the construction of encoding and decoding circuits for the [n, k, d] codes. Finally, a detailed procedure to construct the recovery channel using encoding circuits and encoded computational basis codewords are demonstrated for [5, 1, 3] code and [8, 3, 3] code step by step as examples, with heuristic explanations based on necessary and sufficient conditions for quantum error correction. Possible future study and open problems will also be mentioned.
We introduce an quantum-classical hybrid algorithm, named automatic quantum circuit encoding (AQCE), that is designed to encode an arbitrary quantum state | Ψ 〉 onto an optimal quantum circuit C ̂ composed of a finite set of single- and two-qubit quantum gates. The algorithm employs an objective function based on the absolute value of fidelity, F = 〈 0 | C ̂ † | Ψ 〉 , which is iteratively maximized to construct an optimal quantum circuit C ̂ with controlled accuracy. Here, | 0 〉 denotes a trivial product state in the computational basis of a quantum computer. The core of this algorithm lies in the sequential determination of an optimal set of two-qubit unitary operators, identified one by one through the singular value decomposition of the fidelity tensor. Once an optimal set of operators is determined, including the location of qubits on which each operator acts, elementary quantum gates are assigned algebraically to these two-qubit unitary operators. Importantly, these procedures are deterministic without assuming any quantum circuit ansatz and therefore eliminate the need for parameter optimization of parametrized quantum gates. Through noiseless numerical simulations, we demonstrate the effectiveness of the AQCE algorithm in encoding ground states of quantum many-body systems, including the spin-1/2 antiferromagnetic Heisenberg model and the spin-1/2 X Y model. We also compare these results with quantum circuit encoding employing predefined circuit structures such as Trotter-like and MERA-like circuit ansatze. Furthermore, our algorithm extends to classical data, for instance, classical images represented as quantum states using amplitude encoding. The adaptability enables us to adjust the quantum resource requirement, i.e., the number of qubits, by partitioning classical data into multiple distinct segments. This feature holds potential for near-term applications in quantum machine learning, such as a state preparation of classical data for an input quantum state to be processed. Finally, using a real quantum device provided by IBM Quantum, we experimentally validate that a quantum circuit generated by the AQCE algorithm can indeed reasonably represent the original quantum state. Published by the American Physical Society 2024
Quantum error correction (QEC) is an essential concept for any quantum information processing device. Typically, QEC is designed with minimal assumptions about the noise process; this generic assumption exacts a high cost in efficiency and performance. In physical systems, errors are not likely to be arbitrary; rather we will have reasonable models for the structure of quantum decoherence. We may choose quantum error correcting codes and recovery operations that specifically target the most likely errors. We present a convex optimization method to determine the optimal (in terms of average entanglement fidelity) recovery operation for a given channel, encoding, and information source. This is solvable via a semidefinite program (SDP). We present computational algorithms to generate near-optimal recovery operations structured to begin with a projective syndrome measurement. These structured operations are more computationally scalable than the SDP required for computing the optimal; we can thus numerically analyze longer codes. Using Lagrange duality, we bound the performance of the structured recovery operations and show that they are nearly optimal in many relevant cases. We present two classes of channel-adapted quantum error correcting codes specifically designed for the amplitude damping channel. These have significantly higher rates with shorter block lengths than corresponding generic quantum error correcting codes. Both classes are stabilizer codes, and have good fidelity performance with stabilizer recovery operations. The encoding, syndrome measurement, and syndrome recovery operations can all be implemented with Clifford group operations.
Mapping the error syndromes to error operators is the core of quantum decoding network and the key step to realize quantum error correction. The definitions of the bit flip error syndrome matrix and the phase flip error syndrome matrix are presented, and then the error syndromes of Pauli errors are expressed in terms of the columns of the bit flip error syndrome matrix and the phase flip error syndrome matrix. It is also shown that the error syndrome matrix of a stabilizer code is determined by its check matrix, which is similar to the relationship between the classical error and the parity check matrix of classical codes. So, the techniques of error detection and error correction for classical linear codes can be applied to quantum stabilizer codes after some modifications. The error correction circuits are constructed based on the relationship between the error operator and error syndrom. The decoding circuit is constructed by reversing the encoding circuit because the encoding operators are unitary.
For realizing a quantum memory we suggest to first encode quantum information via a quantum error correcting code and then concatenate combined decoding and re-encoding operations. This requires that the encoding and the decoding operation can be performed faster than the typical decoherence time of the underlying system. The computational model underlying the one-way quantum computer, which has been introduced by Hans Briegel and Robert Raussendorf, provides a suitable concept for a fast implementation of quantum error correcting codes. It is shown explicitly in this article is how encoding and decoding operations for stabilizer codes can be realized on a one-way quantum computer. This is based on the graph code representation for stabilizer codes, on the one hand, and the relation between cluster states and graph codes, on the other hand.
Quantum computers have the potential to provide exponential speedups over their classical counterparts. Quantum principles are being applied to fields such as communications, information processing, and artificial intelligence to achieve quantum advantage. However, quantum bits are extremely noisy and prone to decoherence. Thus, keeping the qubits error free is extremely important toward reliable quantum computing. Quantum error correcting codes have been studied for several decades and methods have been proposed to import classical error correcting codes to the quantum domain. Along with the exploration into novel and more efficient quantum error correction codes, it is also essential to design circuits for practical realization of these codes. This article serves as a tutorial on designing and simulating quantum encoder and decoder circuits for stabilizer codes. We first describe Shor’s 9-qubit code which was the first quantum error correcting code. We discuss the stabilizer formalism along with the design of encoding and decoding circuits for stabilizer codes such as the five-qubit code and Steane code. We also design nearest neighbor compliant circuits for the above codes. The circuits were simulated and verified using IBM Qiskit.