Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2309.06005

Distributed Scheduling of Quantum Circuits with Noise and Time Optimization

Debasmita Bhoumik, Ritajit Majumdar, Amit Saha, Susmita Sur‐Kolay

Published Sep 12, 2023• 19 citations
arXivHTMLPDF

Abstract

Quantum computers are currently noisy, particularly without error correction and fault tolerance. Methods like error suppression and mitigation are widely used to improve performance. Circuit cutting, which partitions a circuit into smaller subcircuits, can also reduce noise. In this paper, we propose an Integer Linear Program (ILP) based scheduler for optimizing subcircuit schedules on available hardware. The goal is to maximize overall fidelity and ensure each hardware does not exceed its predefined execution time. For 10-qubit circuits, our method achieves an average fidelity improvement of ~12.3% and ~21% with and without measurement error mitigation, respectively, even with minimal execution time. Additionally, we introduce a polynomial-time graph-theoretic scheduling method that matches the ILP scheduler's results when the number of subcircuits does not exceed the number of hardware units, each with minimal execution time. This noise and time-optimized scheduler represents a crucial step towards optimal quantum computing performance, especially with limited hardware access.

DOI
10.48550/arxiv.2309.06005

Related papers

Efficient Circuit Cutting and Scheduling in a Multi-Node Quantum System with Dynamic EPR Pairs

Zefan Du, Wenrui Zhang, Wenqi Wei +4 more

Despite advancements, current quantum hardware faces significant challenges, including limited qubit counts and high susceptibility to noise, which hinder the execution of large, complex algorithms. To address these limitations, multi-node quantum systems and quantum circuit cutting techniques partition large circuits into smaller subcircuits that can be executed on individual quantum machines and then reconstructed using classical resources. However, these methods introduce new challenges, such as the large overhead from subcircuit reconstruction and additional noise from entangled EPR pairs, especially in multi-node quantum systems. In this paper, we propose the Efficient Circuit Cutting and Scheduling (EC2S) system, which integrates EPR pairs with circuit cutting to address these issues. EC2S improves system performance by transitioning from logical to physical EPR pairs and further reduces computational overhead by minimizing the number of subcircuits during the reconstruction phase. \sol~ is implemented using Qiskit and evaluated on both real quantum hardware and various emulators. Compared to the state-of-the-art Qiskit-Addon-Cut, EC2S achieves significant improvements in fidelity, up to 16.7\%, and reduces system-wide expenditure by up to 99.5\%.

arXiv:2412.18709•Dec 24, 2024•3 citations

Quantum Circuit Partitioning For Effective Utilization of Quantum Resources

Connor Howe, Cristina Radian, Justin Woodring +2 more

Near-term hardware is constrained by high error rates, small qubit counts, and relatively low output fidelity, making the execution of large, high performance quantum circuits difficult. Circuit partitioning (or circuit cutting) has emerged as a promising approach to circumvent these limitations by decomposing circuits into smaller subcircuits at two-qubit interaction points. However, it remains unclear which classes of circuits benefit the most from partitioning and under what hardware conditions it is most effective. In this work, we evaluate the suitability of quantum circuits for partitioning from three perspectives: improving fidelity, enabling distributed execution, and scaling to larger circuit sizes. Specifically, we compare uncut circuit execution against two circuit partitioning approaches: Qiskit's automatic cut finding technique and a custom performance optimized circuit cutting method. We also measure these across GHZ, QFT, brickwork, and random quantum circuits ranging from 4 to 14 qubits, using mean absolute error of expectation values and overall output fidelity. Our results show that partitioning benefits larger, highly interconnected circuits, with our custom method reducing error by up to 55\% and improve fidelity for GHZ circuits, but degrading performance for brickwork circuits at larger scales.

quant-pharXiv:2604.22664•Apr 27, 2026•0 citations

Resource-aware scheduling of multiple quantum circuits on a hardware device

Debasmita Bhoumik, Ritajit Majumdar, Susmita Sur‐Kolay

Recent quantum technologies and quantum error-correcting codes emphasize the requirement for arranging interacting qubits in a nearest-neighbor (NN) configuration while mapping a quantum circuit onto a given hardware device, in order to avoid undesirable noise. It is equally important to minimize the wastage of qubits in a quantum hardware device with m qubits while running circuits of n qubits in total, with n < m. In order to prevent cross-talk between two circuits, a buffer distance between their layouts is needed. Furthermore, not all the qubits and all the two-qubit interactions are at the same noise-level. Scheduling multiple circuits on the same hardware may create a possibility that some circuits are executed on a noisier layout than the others. In this paper, we consider an optimization problem which schedules as many circuits as possible for execution in parallel on the hardware, while maintaining a pre-defined layout quality for each. An integer linear programming formulation to ensure maximum fidelity while preserving the nearest neighbor arrangement among interacting qubits is presented. Our assertion is supported by comprehensive investigations involving various well-known quantum circuit benchmarks. As this scheduling problem is shown to be NP Hard, we also propose a greedy heuristic method which provides 2x and 3x better utilization for 27-qubit and 127-qubit hardware devices respectively in terms of qubits and time.

arXiv:2407.08930•Jul 12, 2024•6 citations

Improving Quantum Resource Usage Through Automated Circuit Scheduling

Jaime Alvarado‐Valiente, Javier Romero‐Álvarez, Enrique Moguel +4 more

The current execution model of quantum computers, based on serialized task processing, leads to inefficient resource utilization and increased waiting times. This inefficiency persists even as the demand for quantum computing grows. To address this, an automated scheduling approach is proposed through the AutoScheduler library, which replicates quantum circuits to fully occupy the available qubits in a quantum processor. This strategy reduces the number of required shots per execution while optimizing hardware usage. Experimental validation on IBM Quantum and Amazon Braket platforms demonstrates that autoscheduling achieves substantial reductions in execution time and cost, with minimal impact on result fidelity despite inherent quantum noise. These findings suggest that circuit autoscheduling is a viable method for improving the scalability and efficiency of quantum computing in the NISQ era.

IT Professional•Mar 1, 2026•0 citations

Reducing Maximum Subcircuits Depth in Quantum Circuit Cutting

Milad Eslaminia, Sébastien Le Beux

Noisy intermediate-scale quantum (NISQ) devices with limited qubit count and connectivity limit the scale of quantum circuits that can be executed. Circuit cutting methods simulate larger quantum computers by decomposing large circuits into small subcircuits that can be executed on NISQ hardware. Existing circuit cutting methods only consider the qubit count of the target hardware for finding the locations of cuts on the circuits. This can result in deeper subcircuits after mapping on the hardware. Fidelity decays exponentially with circuit depth and diminishes the quality of execution. We propose a circuit-cutting framework that reduces variance in the depth of subcircuits after mapping to the hardware. Our method formulates the initial circuit cutting as a multi-objective optimization problem based on an evolutionary search method with the number of cuts and the maximum depth of individual routed subcircuits as fitness objectives. This method is implemented as an extension to the existing Qiskit Circuit Cutting Addon, which allows for integration in existing flows. Our approach achieves reductions in routed subcircuit depth of up to 9.9% across benchmark circuits compared with baseline methods.

IEEE Transactions on Quantum Engineering•Jan 1, 2026•0 citations

Dynamic Hypergraph Partitioning of Quantum Circuits with Hybrid Execution

S.J. Sweeney, Krishnendu Guha

Quantum algorithms offer an exponential speedup over classical algorithms for a range of computational problems. The fundamental mechanisms underlying quantum computation required the development and construction of quantum computers. These devices are referred to as NISQ (Noisy Intermediate-Scale Quantum) devices. Not only are NISQ devices extremely limited in their qubit count but they also suffer from noise during computation and this problem only gets worse as the size of the circuit increases which limits the practical use of quantum computers for modern day applications. This paper will focus on utilizing quantum circuit partitioning to overcome the inherent issues of NISQ devices. Partitioning a quantum circuit into smaller subcircuits has allowed for the execution of quantum circuits that are too large to fit on one quantum device. There have been many previous approaches to quantum circuit partitioning and each of these approaches differ in how they work with some focusing on hardware-aware partitioning, optimal graph-based partitioning, multi-processor architectures and many more. These approaches achieve success in their objective but they often fail to scale well which impacts cost and noise. The ultimate goal of this paper is to mitigate these issues by minimizing 3 important metrics; noise, time and cost. To achieve this we use dynamic partitioning for practical circuit cutting and we take advantage of the benefits of hybrid execution where classical computation will be used alongside quantum hardware. This approach has proved to be beneficial with respect to noise with classical execution enabling a 42.30% reduction in noise and a 40% reduction in the number of qubits required in cases where a mixture of classical and quantum computation were required.

arXiv:2506.09963•Jun 11, 2025•3 citations
Quantum computers are currently noisy, particularly without error correction and fault tolerance. Methods like error suppression and mitigation are widely used to improve performance. Circuit cutting, which partitions a circuit into smaller subcircuits, can also reduce noise. In this paper, we propose an Integer Linear Program (ILP) based scheduler for optimizing subcircuit schedules on available hardware. The goal is to maximize overall fidelity and ensure each hardware does not exceed its predefined execution time. For 10-qubit circuits, our method achieves an average fidelity improvement of ~12.3% and ~21% with and without measurement error mitigation, respectively, even with minimal execution time. Additionally, we introduce a polynomial-time graph-theoretic scheduling method that matches the ILP scheduler's results when the number of subcircuits does not exceed the number of hardware units, each with minimal execution time. This noise and time-optimized scheduler represents a crucial step towards optimal quantum computing performance, especially with limited hardware access.
Despite advancements, current quantum hardware faces significant challenges, including limited qubit counts and high susceptibility to noise, which hinder the execution of large, complex algorithms. To address these limitations, multi-node quantum systems and quantum circuit cutting techniques partition large circuits into smaller subcircuits that can be executed on individual quantum machines and then reconstructed using classical resources. However, these methods introduce new challenges, such as the large overhead from subcircuit reconstruction and additional noise from entangled EPR pairs, especially in multi-node quantum systems. In this paper, we propose the Efficient Circuit Cutting and Scheduling (EC2S) system, which integrates EPR pairs with circuit cutting to address these issues. EC2S improves system performance by transitioning from logical to physical EPR pairs and further reduces computational overhead by minimizing the number of subcircuits during the reconstruction phase. \sol~ is implemented using Qiskit and evaluated on both real quantum hardware and various emulators. Compared to the state-of-the-art Qiskit-Addon-Cut, EC2S achieves significant improvements in fidelity, up to 16.7\%, and reduces system-wide expenditure by up to 99.5\%.
Near-term hardware is constrained by high error rates, small qubit counts, and relatively low output fidelity, making the execution of large, high performance quantum circuits difficult. Circuit partitioning (or circuit cutting) has emerged as a promising approach to circumvent these limitations by decomposing circuits into smaller subcircuits at two-qubit interaction points. However, it remains unclear which classes of circuits benefit the most from partitioning and under what hardware conditions it is most effective. In this work, we evaluate the suitability of quantum circuits for partitioning from three perspectives: improving fidelity, enabling distributed execution, and scaling to larger circuit sizes. Specifically, we compare uncut circuit execution against two circuit partitioning approaches: Qiskit's automatic cut finding technique and a custom performance optimized circuit cutting method. We also measure these across GHZ, QFT, brickwork, and random quantum circuits ranging from 4 to 14 qubits, using mean absolute error of expectation values and overall output fidelity. Our results show that partitioning benefits larger, highly interconnected circuits, with our custom method reducing error by up to 55\% and improve fidelity for GHZ circuits, but degrading performance for brickwork circuits at larger scales.
Recent quantum technologies and quantum error-correcting codes emphasize the requirement for arranging interacting qubits in a nearest-neighbor (NN) configuration while mapping a quantum circuit onto a given hardware device, in order to avoid undesirable noise. It is equally important to minimize the wastage of qubits in a quantum hardware device with m qubits while running circuits of n qubits in total, with n < m. In order to prevent cross-talk between two circuits, a buffer distance between their layouts is needed. Furthermore, not all the qubits and all the two-qubit interactions are at the same noise-level. Scheduling multiple circuits on the same hardware may create a possibility that some circuits are executed on a noisier layout than the others. In this paper, we consider an optimization problem which schedules as many circuits as possible for execution in parallel on the hardware, while maintaining a pre-defined layout quality for each. An integer linear programming formulation to ensure maximum fidelity while preserving the nearest neighbor arrangement among interacting qubits is presented. Our assertion is supported by comprehensive investigations involving various well-known quantum circuit benchmarks. As this scheduling problem is shown to be NP Hard, we also propose a greedy heuristic method which provides 2x and 3x better utilization for 27-qubit and 127-qubit hardware devices respectively in terms of qubits and time.
The current execution model of quantum computers, based on serialized task processing, leads to inefficient resource utilization and increased waiting times. This inefficiency persists even as the demand for quantum computing grows. To address this, an automated scheduling approach is proposed through the AutoScheduler library, which replicates quantum circuits to fully occupy the available qubits in a quantum processor. This strategy reduces the number of required shots per execution while optimizing hardware usage. Experimental validation on IBM Quantum and Amazon Braket platforms demonstrates that autoscheduling achieves substantial reductions in execution time and cost, with minimal impact on result fidelity despite inherent quantum noise. These findings suggest that circuit autoscheduling is a viable method for improving the scalability and efficiency of quantum computing in the NISQ era.
Noisy intermediate-scale quantum (NISQ) devices with limited qubit count and connectivity limit the scale of quantum circuits that can be executed. Circuit cutting methods simulate larger quantum computers by decomposing large circuits into small subcircuits that can be executed on NISQ hardware. Existing circuit cutting methods only consider the qubit count of the target hardware for finding the locations of cuts on the circuits. This can result in deeper subcircuits after mapping on the hardware. Fidelity decays exponentially with circuit depth and diminishes the quality of execution. We propose a circuit-cutting framework that reduces variance in the depth of subcircuits after mapping to the hardware. Our method formulates the initial circuit cutting as a multi-objective optimization problem based on an evolutionary search method with the number of cuts and the maximum depth of individual routed subcircuits as fitness objectives. This method is implemented as an extension to the existing Qiskit Circuit Cutting Addon, which allows for integration in existing flows. Our approach achieves reductions in routed subcircuit depth of up to 9.9% across benchmark circuits compared with baseline methods.
Quantum algorithms offer an exponential speedup over classical algorithms for a range of computational problems. The fundamental mechanisms underlying quantum computation required the development and construction of quantum computers. These devices are referred to as NISQ (Noisy Intermediate-Scale Quantum) devices. Not only are NISQ devices extremely limited in their qubit count but they also suffer from noise during computation and this problem only gets worse as the size of the circuit increases which limits the practical use of quantum computers for modern day applications. This paper will focus on utilizing quantum circuit partitioning to overcome the inherent issues of NISQ devices. Partitioning a quantum circuit into smaller subcircuits has allowed for the execution of quantum circuits that are too large to fit on one quantum device. There have been many previous approaches to quantum circuit partitioning and each of these approaches differ in how they work with some focusing on hardware-aware partitioning, optimal graph-based partitioning, multi-processor architectures and many more. These approaches achieve success in their objective but they often fail to scale well which impacts cost and noise. The ultimate goal of this paper is to mitigate these issues by minimizing 3 important metrics; noise, time and cost. To achieve this we use dynamic partitioning for practical circuit cutting and we take advantage of the benefits of hybrid execution where classical computation will be used alongside quantum hardware. This approach has proved to be beneficial with respect to noise with classical execution enabling a 42.30% reduction in noise and a 40% reduction in the number of qubits required in cases where a mixture of classical and quantum computation were required.