Birgit Stiller, Kevin Jaksch, Johannes Piotrowski, Moritz Merklein, Mikołaj K. Schmidt, Khu T. Vu, Pan Ma, Steve Madden, Michael J. Steel, Christopher G. Poulton, Benjamin J. Eggleton
Abstract Signal processing based on stimulated Brillouin scattering (SBS) is limited by the narrow linewidth of the optoacoustic response, which confines many Brillouin applications to continuous wave signals or optical pulses longer than several nanoseconds. In this work, we experimentally demonstrate Brillouin interactions at the 150 ps time scale and a delay for a record 15 ns which corresponds to a delay of 100 pulse widths. This breakthrough experimental result was enabled by the high local gain of the chalcogenide waveguides as the optoacoustic interaction length reduces with pulse width. We successfully transfer 150 ps-long pulses to traveling acoustic waves within a Brillouin-based memory setup. The information encoded in the optical pulses is stored for 15 ns in the acoustic field. We show the retrieval of eight amplitude levels, multiple consecutive pulses, and low distortion in pulse shape. The extension of Brillouin-based storage to the ultra-short pulse regime is an important step for the realization of practical Brillouin-based delay lines and other optical processing applications.
Abstract Signal processing based on stimulated Brillouin scattering (SBS) is limited by the narrow linewidth of the optoacoustic response, which confines many Brillouin applications to continuous wave signals or optical pulses longer than several nanoseconds. In this work, we experimentally demonstrate Brillouin interactions at the 150 ps time scale and a delay for a record 15 ns which corresponds to a delay of 100 pulse widths. This breakthrough experimental result was enabled by the high local gain of the chalcogenide waveguides as the optoacoustic interaction length reduces with pulse width. We successfully transfer 150 ps-long pulses to traveling acoustic waves within a Brillouin-based memory setup. The information encoded in the optical pulses is stored for 15 ns in the acoustic field. We show the retrieval of eight amplitude levels, multiple consecutive pulses, and low distortion in pulse shape. The extension of Brillouin-based storage to the ultra-short pulse regime is an important step for the realization of practical Brillouin-based delay lines and other optical processing applications.
Efficient and extended light storage mechanisms are pivotal in photonics, particularly in optical communications, microwave photonics, and quantum networks, as they offer a direct route to circumvent electrical conversion losses and surmount bandwidth constraints. Stimulated Brillouin Scattering (SBS) is an established method to store optical information by transferring it to the acoustic domain, but current on-chip SBS efforts have limited bandwidth or storage time due to the phonon lifetime of several nanoseconds. An alternate approach known as quasi-light storage (QLS), which involves the creation of delayed replicas of optical data pulses via SBS in conjunction with a frequency comb, has been proposed to lift the storage time constraint; however, its realization has been confined to lengthy optical fibers, constraining integration with on-chip optical elements and form factors. Here, we present an experimental demonstration of QLS on a photonic chip leveraging the large SBS gain of chalcogenide glass, achieving delays of up to 500 ns for 1 ns long signal pulses, surpassing typical Brillouin storage processes' acoustic lifetime by more than an order of magnitude and waveguide transit time by two orders of magnitude. We experimentally and numerically investigate the dynamics of on-chip QLS and reveal that the interplay between the acoustic wave that stores the optical signal and subsequent optical pump pulses leads to a reshaping of the acoustic field. Our demonstrations illustrate the potential for achieving ultra-long storage times of individual pulses by several hundred pulse widths, marking a significant stride toward advancing the field of all-optical storage and delay mechanisms.
Abstract Storing or delaying optical signals is of key interest for fundamental research and applications in radar, microwave signal processing, quantum information as well as optical communication systems. Delay systems based on stimulated Brillouin scattering (SBS), a coherent interaction between optical and acoustic waves can be implemented in optical fiber or chip-scale platforms, operate at room temperature and can be fully controlled via the optical pump wave. In this article, we review delay and storage techniques based on SBS. We present SBS slow-light, fiber delay lines based on Brillouin dynamic gratings, Brillouin quasi-light storage and Brillouin-based light storage via photon-phonon conversion and compare their performance. In this process, we also include an overview of different platforms used for Brillouin light storage and delay schemes, such as optical fiber, planar soft-glass waveguides, and silica fiber-tip resonators.
High Resolution Image Download MS PowerPoint Slide In recent years, remarkable advances in photonic computing have highlighted the need for photonic memory, particularly high-speed and coherent random-access memory. Addressing the ongoing challenge of implementing photonic memories is required to fully harness the potential of photonic computing. A photonic-phononic memory based on stimulated Brillouin scattering is a possible solution, as it coherently transfers optical information into sound waves at high-speed. Such an optoacoustic memory has shown great potential as it fulfills key requirements for high-performance optical random-access memory due to its coherence, on-chip compatibility, frequency selectivity, and high bandwidth. However, the storage time has so far been limited to a few nanoseconds due to the nanosecond decay of the acoustic wave. In this work, we experimentally enhance the intrinsic storage time of an optoacoustic memory by more than 1 order of magnitude and coherently retrieve optical information after a storage time of 123 ns. This is achieved by employing the optoacoustic memory in a highly nonlinear fiber at 4.2 K, increasing the intrinsic phonon lifetime by a factor of 6. We demonstrate the capability of our scheme by measuring the initial and readout optical data pulses with a direct and double homodyne detection scheme. Finally, we analyze the dynamics of the optoacoustic memory at different cryogenic temperatures in the range of 4.2–20 K and compare the findings to continuous wave measurements. The extended storage time is beneficial not only for photonic computing but also for Brillouin applications that require long phonon lifetimes, such as optoacoustic filters, true-time delay networks, and synthesizers in microwave photonics.
Storing and delaying optical information is of crucial importance for optical communications, signal processing and in the quantum domain. A plethora of techniques for optical storage have been shown which aim to maintain as much as possible the advantages of optics, such as e.g. the coherence, the bandwidth and capacity. In particular the interaction of optical waves with mechanical motion offers a solution to buffer optical information [1-4]. It was shown that one can use acoustic waves to store and delay optical signals coherently via the effect of stimulated Brillouin scattering (SBS) [3,4]. This allows for simultaneous storage at multiple wavelengths [5], cascaded storage at different spatial positions [6], and nonreciprocal storage with a GHz bandwidth [7]. However, the delay time of this technique is so far limited to the acoustic lifetime of about 10 ns.
Optical and acoustic waves can interact over the nonlinear effect of stimulated Brillouin scattering (SBS), which is a coherent process. By using traveling acoustic waves, we recently showed proof-of-principle experiments of Brillouin-based light storage. The particularity of Brillouin-based light storage is the strict phase-matching condition. This allows for different features: simultaneous storage at multiple wavelengths, cascaded storage at different spatial positions, and nonreciprocal storage with a GHz bandwidth. However, the delay time of this technique has so far been limited to the acoustic lifetime of about 10 ns. In this talk, I will discuss our recent results on coherent photon-phonon interaction. One focus will be on a proof-of-principle experiments on how to reinforce acoustic phonons. This enables us to overcome the obstacle of the limited acoustic lifetime by optically reinforcing the acoustic wave.
Storing and delaying optical signals is key for signal processing and control in many microwave photonics, quantum and classical communication systems. Hence, scientists proposed and demonstrated a multitude of approaches, from slow-light in photonic crystals, ring resonators, to optomechanical and stimulated Brillouin scattering (SBS) based schemes [1]. Yet, a scheme that offers tunable, long delays in a small form factor is still elusive. Quasi-light storage (QLS) is an optical pulse storage method that has been used to achieve long, dynamically adjustable delay times in optical fibres by utilising SBS to spectrally sample a signal with an optical frequency comb [2]. Relying on long lengths of fibre, however, limits Size, Weight, and Power consumption (SWaP) and induces latency much larger than the storage time. Here, we demonstrate QLS on a photonic chip and achieve delay times an order of magnitude larger than the optical chip transit time. We experimentally show that the SBS interaction between the signal and the pump on the chip creates a single acoustic wave that stores the optical pulse information, and we investigate the temporal dynamics of this storage mechanism. We demonstrate that the repeated interaction of the acoustic wave and optical pump pulses reinforces the acoustic wave, and storage times an order of magnitude larger than the intrinsic acoustic lifetime can be achieved.