Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2308.00932 · ACS Nano

Geometric Scaling of the Current–Phase Relation of Niobium Nanobridge Junctions

Yue Wang, Lei Chen, Yinping Pan, Denghui Zhang, Shujie Yu, Guangting Wu, Xiaoyu Liu, Ling Wu, Weifeng Shi, Guofeng Zhang, Lu Zhang, Wei Peng, Jie Ren, Zhen Wang

Published Aug 13, 2023• 6 citations
arXivHTMLPDF

Abstract

The nanobridge junction (NBJ) is a type of Josephson junction that is advantageous for the miniaturization of superconducting circuits. However, the current–phase relation (CPR) of the NBJ usually deviates from a sinusoidal function, which has been explained by a simplified model with correlation only to its effective length. Here, we investigated both measured and calculated CPRs of niobium NBJs of a cuboidal shape with a three-dimensional bank structure. From a sine-wave to a sawtooth-like form, we showed that deviated CPRs of NBJs can be described quantitatively by its skewness Δθ. Furthermore, the measured dependence of Δθ on the critical current I 0 from 108 NBJs turned out to be consistent with the calculated dependence derived from the change in geometric dimensions. This suggested that the CPRs of NBJs can be tuned by their geometric dimensions. In addition, the calculated scaling behavior of Δ θ versus I 0 in 3D space was provided for the future design of superconducting circuits of a high integration level by using niobium NBJs.

DOI
10.1021/acsnano.3c01301

Related papers

Influence of the current-phase relation of nanobridge junction on the SQUID performance

Xinxin Fan, Yue Wang, Xu Liu +8 more

Superconducting quantum interference devices (SQUIDs) based on nanobridge junctions (NBJs) are promising platforms for highly sensitive magnetic detection. The SQUID performance is influenced by the non-sinusoidal current-phase relation (CPR) of NBJs. In this work, we measured the flux modulation of 10 asymmetric Nb SQUIDs based on three-dimensional NBJs, along with the CPR response in each device, which is mainly determined by the junction with the smaller critical current. By studying the CPR parameters (skewness Δ θ , critical current I c1 , and effective junction inductance L j ), together with the SQUID modulation characteristics (voltage modulation amplitude Δ I c R n and current modulation ratio Δ I c /2 I c1 ), we found that as I c1 increases from 0.6 μA to 6.6 μA and L j correspondingly decreases from 106 pH to 70 pH, the CPR skewness Δ θ increases from 0.2 rad to 1.5 rad. Over this range, Δ I c /2 I c1 decreases from 1.2 to 0.5, while Δ I c R n increases from about 0.06 mV to 0.22 mV. More specifically, Δ I c R n increases while Δ I c /2 I c1 decreases with increasing I c1 , whereas both quantities decrease with increasing L j . These results reveal a trade-off between intrinsic SQUID response and tolerance to readout noise, suggesting that improved performance can be achieved by engineering NBJs with increased I c1 and smaller L j .

Physica C Superconductivity•Jul 17, 2026•0 citations

Gate-Tunable Critical Current of the Three-Dimensional Niobium Nanobridge Josephson Junction

Shujie Yu, Lei Chen, Yinping Pan +10 more

Recent studies have shown that the critical currents of several metallic superconducting nanowires and Dayem bridges can be locally tuned by using a gate voltage ( V g ). Here, we report a gate-tunable Josephson junction structure constructed from a three-dimensional (3D) niobium nanobridge junction (NBJ) with a voltage gate on top. Measurements up to 6 K showed that the critical current of this structure can be tuned to zero by increasing V g . The critical gate voltage was reduced to 16 V and may possibly be reduced further by reducing the thickness of the insulation layer between the gate and the NBJ. Furthermore, the flux modulation generated by Josephson interference of two parallel 3D NBJs can also be tuned by using V g in a similar manner. Therefore, we believe that this gate-tunable Josephson junction structure is promising for superconducting circuit fabrication at high integration levels.

arXiv:2308.00953•Nano Letters•Aug 17, 2023•13 citations

Numerical analysis of dynamical behavior in Josephson junctions with non-sinusoidal current-phase relations

Liangliang Yang, HE Kaiyong, Genting Dai +5 more

Josephson junction, as the core nonlinear element underpinning superconducting electronics, is characterized by its current-phase relation (CPR), which fundamentally determines the dynamical properties and functional capabilities of superconducting quantum devices. Traditional Josephson junctions typically exhibit a traditional sinusoidal CPR; however, the junctions characterized by non-sinusoidal CPR have recently attracted considerable attention due to their distinctive physical properties and promising quantum device applications. In this work, a numerical model tailored specifically for junctions exhibiting non-sinusoidal CPR is developed by integrating experimentally measured current-voltage (I-V ) characteristics from Nb/Al-AlOx/Nb junctions into a resistively and capacitively shunted junction (RCSJ) framework. By leveraging this refined model, the influence of CPR skewness on Josephson junction dynamics is systematically investigated. Our results indicate that in underdamped junctions, the critical current significantly diminishes with the increase of CPR skewness, a behavior reminiscent of the adjustable critical currents typically observed in DC superconducting quantum interference devices (SQUIDs). Conversely, in overdamped junctions, the influence of CPR skewness on the I-V characteristics is found to be negligible. However, our numerical simulations under microwave irradiation indicate that nonsinusoidal CPRs readily promote the emergence of half-integer Shapiro steps in overdamped junctions, thereby establishing CPR skewness as a plausible microscopic origin for this phenomenon. In addition, the advanced design system (ADS) simulations is employed to model nonlinear resonators and DC SQUID circuits, offering a detailed investigation into how nonsinusoidal CPRs modulate the Josephson inductance and magnetic flux response. Our findings reveal that engineering the CPR of Josephson junctions provides substantial flexibility in the design of superconducting qubits, parametric amplifiers, and non-magnetic nonreciprocal devices. This tunability underscores significant opportunities for developing next-generation superconducting electronic components. The Josephson junctions with engineered CPR offer expanded functionality for superconducting quantum technologies. This study suggests that customized CPR can enhance control over the dynamical behavior of junctions, and promote the optimized designs of superconducting qubits, parametric amplifiers, and nonmagnetic nonreciprocal devices.

Acta Physica Sinica•Jan 1, 2025•0 citations

Temperature dependence measurements of the supercurrent-phase relationship in niobium nanobridges

A.G.P. Troeman, S. H. W. van der Ploeg, Evgeni V. Il’ichev +4 more

The current-phase relationship has been measured as a function of temperature for niobium nanobridges with different widths. A deformation from Josephson-like sinusoidal characteristics at high temperatures to sawtooth shaped curves at intermediate and multivalued relationships at low temperatures was observed. Based on this, possible hysteresis in the current-voltage characteristics of niobium nanobridge superconducting quantum interference devices can be attributed to phase slippage.

Physical Review B•Jan 14, 2008•55 citations

Determination of the Current–Phase Relation in Josephson Junctions by Means of an Asymmetric Two-Junction SQUID

Lev V. Ginzburg, Igor E. Batov, V. V. Bol’ginov +7 more

An analytical approach that makes it possible to reconstruct the current–phase relation (CPR) in Josephson structures included in one of the arms of a two-junction superconducting quantum interference device (SQUID), where the second junction has a significantly higher critical current and a known (sinusoidal) CPR, has been developed. The developed methods of analytical and numerical studies of current–flow transformations in two-junction SQUIDs make it possible to reconstruct the CPR of a junction with a low critical current taking into account both the existence of the self-inductance of the interferometer contour and a possible asymmetry in the supply current system. The efficiency of this approach has been confirmed by the experimental study of niobium–aluminum/aluminum oxide–niobium test structures with the known CPR.

Journal of Experimental and Theoretical Physics Letters•Jan 1, 2018•17 citations

Miniaturization of the Superconducting Memory Cell via a Three-Dimensional Nb Nano-superconducting Quantum Interference Device

Lei Chen, Lili Wu, Yue Wang +9 more

Scalable memories that can match the speeds of superconducting logic circuits have long been desired to enable a superconducting computer. A superconducting loop that includes a Josephson junction can store a flux quantum state in picoseconds. However, the requirement for the loop inductance to create a bistate hysteresis sets a limit on the minimal area occupied by a single memory cell. Here, we present a miniaturized superconducting memory cell based on a three-dimensional (3D) Nb nano-superconducting quantum interference device (nano-SQUID). The major cell area here fits within an 8 × 9 μm 2 rectangle with a cross-selected function for memory implementation. The cell shows periodic tunable hysteresis between two neighboring flux quantum states produced by bias current sweeping because of the large modulation depth of the 3D nano-SQUID (∼66%). Furthermore, the measured current-phase relations (CPRs) of nano-SQUIDs are shown to be skewed from a sine function, as predicted by theoretical modeling. The skewness and the critical current of 3D nano-SQUIDs are linearly correlated. It is also found that the hysteresis loop size is in a linear scaling relationship with the CPR skewness using the statistics from characterization of 26 devices. We show that the CPR skewness range of π/4–3π/4 is equivalent to a large loop inductance in creating a stable bistate hysteresis for memory implementation. Therefore, the skewed CPR of 3D nano-SQUID enables further superconducting memory cell miniaturization by overcoming the inductance limitation of the loop area.

arXiv:2007.11734•ACS Nano•Jul 22, 2020•19 citations
The nanobridge junction (NBJ) is a type of Josephson junction that is advantageous for the miniaturization of superconducting circuits. However, the current–phase relation (CPR) of the NBJ usually deviates from a sinusoidal function, which has been explained by a simplified model with correlation only to its effective length. Here, we investigated both measured and calculated CPRs of niobium NBJs of a cuboidal shape with a three-dimensional bank structure. From a sine-wave to a sawtooth-like form, we showed that deviated CPRs of NBJs can be described quantitatively by its skewness Δθ. Furthermore, the measured dependence of Δθ on the critical current I 0 from 108 NBJs turned out to be consistent with the calculated dependence derived from the change in geometric dimensions. This suggested that the CPRs of NBJs can be tuned by their geometric dimensions. In addition, the calculated scaling behavior of Δ θ versus I 0 in 3D space was provided for the future design of superconducting circuits of a high integration level by using niobium NBJs.
Superconducting quantum interference devices (SQUIDs) based on nanobridge junctions (NBJs) are promising platforms for highly sensitive magnetic detection. The SQUID performance is influenced by the non-sinusoidal current-phase relation (CPR) of NBJs. In this work, we measured the flux modulation of 10 asymmetric Nb SQUIDs based on three-dimensional NBJs, along with the CPR response in each device, which is mainly determined by the junction with the smaller critical current. By studying the CPR parameters (skewness Δ θ , critical current I c1 , and effective junction inductance L j ), together with the SQUID modulation characteristics (voltage modulation amplitude Δ I c R n and current modulation ratio Δ I c /2 I c1 ), we found that as I c1 increases from 0.6 μA to 6.6 μA and L j correspondingly decreases from 106 pH to 70 pH, the CPR skewness Δ θ increases from 0.2 rad to 1.5 rad. Over this range, Δ I c /2 I c1 decreases from 1.2 to 0.5, while Δ I c R n increases from about 0.06 mV to 0.22 mV. More specifically, Δ I c R n increases while Δ I c /2 I c1 decreases with increasing I c1 , whereas both quantities decrease with increasing L j . These results reveal a trade-off between intrinsic SQUID response and tolerance to readout noise, suggesting that improved performance can be achieved by engineering NBJs with increased I c1 and smaller L j .
Recent studies have shown that the critical currents of several metallic superconducting nanowires and Dayem bridges can be locally tuned by using a gate voltage ( V g ). Here, we report a gate-tunable Josephson junction structure constructed from a three-dimensional (3D) niobium nanobridge junction (NBJ) with a voltage gate on top. Measurements up to 6 K showed that the critical current of this structure can be tuned to zero by increasing V g . The critical gate voltage was reduced to 16 V and may possibly be reduced further by reducing the thickness of the insulation layer between the gate and the NBJ. Furthermore, the flux modulation generated by Josephson interference of two parallel 3D NBJs can also be tuned by using V g in a similar manner. Therefore, we believe that this gate-tunable Josephson junction structure is promising for superconducting circuit fabrication at high integration levels.
Josephson junction, as the core nonlinear element underpinning superconducting electronics, is characterized by its current-phase relation (CPR), which fundamentally determines the dynamical properties and functional capabilities of superconducting quantum devices. Traditional Josephson junctions typically exhibit a traditional sinusoidal CPR; however, the junctions characterized by non-sinusoidal CPR have recently attracted considerable attention due to their distinctive physical properties and promising quantum device applications. In this work, a numerical model tailored specifically for junctions exhibiting non-sinusoidal CPR is developed by integrating experimentally measured current-voltage (I-V ) characteristics from Nb/Al-AlOx/Nb junctions into a resistively and capacitively shunted junction (RCSJ) framework. By leveraging this refined model, the influence of CPR skewness on Josephson junction dynamics is systematically investigated. Our results indicate that in underdamped junctions, the critical current significantly diminishes with the increase of CPR skewness, a behavior reminiscent of the adjustable critical currents typically observed in DC superconducting quantum interference devices (SQUIDs). Conversely, in overdamped junctions, the influence of CPR skewness on the I-V characteristics is found to be negligible. However, our numerical simulations under microwave irradiation indicate that nonsinusoidal CPRs readily promote the emergence of half-integer Shapiro steps in overdamped junctions, thereby establishing CPR skewness as a plausible microscopic origin for this phenomenon. In addition, the advanced design system (ADS) simulations is employed to model nonlinear resonators and DC SQUID circuits, offering a detailed investigation into how nonsinusoidal CPRs modulate the Josephson inductance and magnetic flux response. Our findings reveal that engineering the CPR of Josephson junctions provides substantial flexibility in the design of superconducting qubits, parametric amplifiers, and non-magnetic nonreciprocal devices. This tunability underscores significant opportunities for developing next-generation superconducting electronic components. The Josephson junctions with engineered CPR offer expanded functionality for superconducting quantum technologies. This study suggests that customized CPR can enhance control over the dynamical behavior of junctions, and promote the optimized designs of superconducting qubits, parametric amplifiers, and nonmagnetic nonreciprocal devices.
An analytical approach that makes it possible to reconstruct the current–phase relation (CPR) in Josephson structures included in one of the arms of a two-junction superconducting quantum interference device (SQUID), where the second junction has a significantly higher critical current and a known (sinusoidal) CPR, has been developed. The developed methods of analytical and numerical studies of current–flow transformations in two-junction SQUIDs make it possible to reconstruct the CPR of a junction with a low critical current taking into account both the existence of the self-inductance of the interferometer contour and a possible asymmetry in the supply current system. The efficiency of this approach has been confirmed by the experimental study of niobium–aluminum/aluminum oxide–niobium test structures with the known CPR.
Scalable memories that can match the speeds of superconducting logic circuits have long been desired to enable a superconducting computer. A superconducting loop that includes a Josephson junction can store a flux quantum state in picoseconds. However, the requirement for the loop inductance to create a bistate hysteresis sets a limit on the minimal area occupied by a single memory cell. Here, we present a miniaturized superconducting memory cell based on a three-dimensional (3D) Nb nano-superconducting quantum interference device (nano-SQUID). The major cell area here fits within an 8 × 9 μm 2 rectangle with a cross-selected function for memory implementation. The cell shows periodic tunable hysteresis between two neighboring flux quantum states produced by bias current sweeping because of the large modulation depth of the 3D nano-SQUID (∼66%). Furthermore, the measured current-phase relations (CPRs) of nano-SQUIDs are shown to be skewed from a sine function, as predicted by theoretical modeling. The skewness and the critical current of 3D nano-SQUIDs are linearly correlated. It is also found that the hysteresis loop size is in a linear scaling relationship with the CPR skewness using the statistics from characterization of 26 devices. We show that the CPR skewness range of π/4–3π/4 is equivalent to a large loop inductance in creating a stable bistate hysteresis for memory implementation. Therefore, the skewed CPR of 3D nano-SQUID enables further superconducting memory cell miniaturization by overcoming the inductance limitation of the loop area.