Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2306.15746 · Nature Communications

Ground-state cooling of a mechanical oscillator by a noisy environment

Cheng Wang, Louise Banniard, Kjetil Børkje, Francesco Massel, Laure Mercier de Lépinay, Mika A. Sillanpää

Published Aug 27, 2024• 14 citations
arXivHTMLPDF

Abstract

Dissipation and the accompanying fluctuations are often seen as detrimental for quantum systems since they are associated with fast relaxation and loss of phase coherence. However, it has been proposed that a pure state can be prepared if external noise induces suitable downwards transitions, while exciting transitions are blocked. We demonstrate such a refrigeration mechanism in a cavity optomechanical system, where we prepare a mechanical oscillator in its ground state by injecting strong electromagnetic noise at frequencies around the red mechanical sideband of the cavity. The optimum cooling is reached with a noise bandwidth smaller than but on the order of the cavity decay rate. At higher bandwidths, cooling is less efficient as suitable transitions are not effectively activated. In the opposite regime where the noise bandwidth becomes comparable to the mechanical damping rate, damping follows the noise amplitude adiabatically, and the cooling is also suppressed. Sideband cooling is a well-known technique exploiting coherent pumping for cooling a quantum system, and recent theoretical work suggested that even broadband noise might be used to the same effect. Here, the authors demonstrate this by cooling a mechanical oscillator in its ground state using synthetic noise.

DOI
10.1038/s41467-024-51645-7

Related papers

Ground state cooling of an optomechanical resonator assisted by a Λ-type atom

Shuo Zhang, Jian‐Qi Zhang, Jie Zhang +3 more

We propose a ground state cooling scheme for an optomechanical resonator based on the system of one Λ-type three-level atom trapped in an optomechanical cavity. This cooling scheme works in a single-photon coupling, and strong atom-cavity coupling regimes. By investigating the cooling dynamics, we find that there is an EIT-like quantum coherent effect in this system which can suppress the undesired transitions for heating. Moreover, our study shows that the final average phonon number of the optomechanical resonator can be smaller than the one based on the sideband cooling. Furthermore, the ground state cooling of the resonator can still be achieved after thermal fluctuations included. In addition, in comparison with previous cooling methods, there are fewer limitations on the decay rates of both the cavity and the atom in this scheme. As a result, this scheme is very suitable to realize the ground cooling of an optomechanical resonator in the experiment.

Optics Express•Nov 5, 2014•34 citations

Ground-state cooling of a mechanical oscillator via a hybrid electro-optomechanical system

Roson Nongthombam, Ambaresh Sahoo, Amarendra Kumar Sarma

We present a scheme for ground-state cooling of a mechanical resonator by simultaneously coupling it to a superconducting qubit and a cavity field. The Hamiltonian describing the hybrid system dynamics is systematically derived. The cooling process is driven by a red-detuned ac drive on the qubit and a laser drive on the optomechanical cavity. We have investigated cooling in the weak and the strong coupling regimes for both the individual system, i.e., qubit assisted cooling and optomechanical cooling, and compared them with the effective hybrid cooling. We show that in the weak coupling and resolved sideband regime, cooling is more efficient in the hybrid case for a specific choice of parameters. On the other hand, in the strong coupling, the hybrid cooling is found to be more effective compared to the individual cooling mechanisms in the resolved regimes.

arXiv:2107.00510•Physical Review A•Aug 13, 2021•20 citations

Optomechanical cooling with simultaneous intracavity and extracavity squeezed light

Shasha Zheng, Feng-Xiao Sun, Muhammad Asjad +6 more

We propose an alternative experimentally feasible approach to achieve high-efficiency ground-state cooling of a mechanical oscillator in an optomechanical system under the deeply unresolved sideband condition with the assistance of both intracavity and extracavity squeezing. In the scheme, a degenerate optical parametric amplifier is placed inside the optical cavity, generating the intracavity squeezing; in addition, the optical cavity is driven by the extracavity squeezed light, namely the extracavity squeezing. The quantum interference effect generated by intracavity squeezing and extracavity squeezing can completely suppress the nonresonant Stokes heating process while greatly enhancing the anti-Stokes cooling process. Therefore, the joint-squeezing scheme is capable of cooling the mechanical oscillators to their quantum ground state in a regime far away from the resolved sideband condition. Compared with other traditional optomechanical cooling schemes, the single-photon cooling rate in this joint-squeezing scheme can be tremendously enlarged by nearly three orders of magnitude. At the same time, the coupling strength required to achieve ground-state cooling can be significantly reduced. This scheme is promising for cooling large-mass and low-frequency mechanical oscillators, which provides a prerequisite for preparing and manipulating nonclassical states in macroscopic quantum systems and lays a significant foundation for quantum manipulation.

arXiv:2403.01179•Physical Review A•Dec 18, 2024•5 citations

Ground state cooling in a bad cavity

Stefano Zippilli, Giovanna Morigi, Wolfgang P. Schleich

We study the mechanical effects of light on an atom trapped in a harmonic potential when an atomic dipole transition is driven by a laser and it is strongly coupled to a mode of an optical resonator. We investigate the cooling dynamics in the bad cavity limit, focusing on the case in which the effective transition linewidth is smaller than the trap frequency, hence when sideband cooling could be implemented. We show that quantum correlations between the mechanical actions of laser and cavity field can lead to an enhancement of the cooling efficiency with respect to sideband cooling. Such interference effects are found when the resonator losses prevail over spontaneous decay and over the rates of the coherent processes characterizing the dynamics.

arXiv:quant-ph/0603250•Journal of Modern Optics•Aug 22, 2006•7 citations

Cooling of micromechanical oscillator in a hybrid optomechanical system with three-level quantum dots

Xuebing Gong, Shuchen Lü

Abstract We propose a ground state cooling scheme for an optomechanical resonator based on the system of a V-type three-level QD ensemble trapped in a two-mode cavity. The two-mode cavity was pumped by two different deriving fields. We studied the optomechanical cooling under the highly unresolved-sideband and beyond Lamb-Dicke regime (coupling strength between the cavity field and the phonon field not far less than the vibrational frequency). Our results show that the noise spectrum appeared a single peak when the detuning of the QD’s high excitation state and high-frequency driving field equals that of the QD’s low excitation state and low-frequency driving field, otherwise, then appeared double peaks. In the case of double peaks, we can realize the transition between optomechanical cooling and heating by changing the coupling strength of QD with cavity field, which is not available in the case of a single peak. We also studied the evolution of the mean phonon number with time, which is helpful to analyze ground state optomechanical cooling.

Journal of Physics B Atomic Molecular and Optical Physics•Aug 26, 2020•1 citation

Coherent feedback control for cavity optomechanical systems with a frequency-dependent mirror

Lei Du, Juliette Monsel, Witlef Wieczorek +1 more

Ground-state cooling of mechanical resonators is a prerequisite for the observation of various quantum effects in optomechanical systems and thus has always been a crucial task in quantum optomechanics. In this paper, we study how to realize ground-state cooling of the mechanical mode in a Fano-mirror optomechanical setup, which allows for enhanced effective optomechanical interaction but typically works in the (deeply) unresolved-sideband regime. We reveal that for such a two-sided cavity geometry with very different decay rates at the two cavity mirrors, it is possible to cool the mechanical mode down to its ground state within a broad range of parameters by using an appropriate single-sided coherent feedback. This is possible even if the total optical loss is more than seven orders of magnitude larger than the mechanical frequency and the feedback efficiency is relatively low. Importantly, we show that a more standard double-sided feedback scheme is not appropriate to cooperate with a Fano-mirror system.

arXiv:2405.13624•Physical Review A•Jan 6, 2025•8 citations
Dissipation and the accompanying fluctuations are often seen as detrimental for quantum systems since they are associated with fast relaxation and loss of phase coherence. However, it has been proposed that a pure state can be prepared if external noise induces suitable downwards transitions, while exciting transitions are blocked. We demonstrate such a refrigeration mechanism in a cavity optomechanical system, where we prepare a mechanical oscillator in its ground state by injecting strong electromagnetic noise at frequencies around the red mechanical sideband of the cavity. The optimum cooling is reached with a noise bandwidth smaller than but on the order of the cavity decay rate. At higher bandwidths, cooling is less efficient as suitable transitions are not effectively activated. In the opposite regime where the noise bandwidth becomes comparable to the mechanical damping rate, damping follows the noise amplitude adiabatically, and the cooling is also suppressed. Sideband cooling is a well-known technique exploiting coherent pumping for cooling a quantum system, and recent theoretical work suggested that even broadband noise might be used to the same effect. Here, the authors demonstrate this by cooling a mechanical oscillator in its ground state using synthetic noise.
We propose a ground state cooling scheme for an optomechanical resonator based on the system of one Λ-type three-level atom trapped in an optomechanical cavity. This cooling scheme works in a single-photon coupling, and strong atom-cavity coupling regimes. By investigating the cooling dynamics, we find that there is an EIT-like quantum coherent effect in this system which can suppress the undesired transitions for heating. Moreover, our study shows that the final average phonon number of the optomechanical resonator can be smaller than the one based on the sideband cooling. Furthermore, the ground state cooling of the resonator can still be achieved after thermal fluctuations included. In addition, in comparison with previous cooling methods, there are fewer limitations on the decay rates of both the cavity and the atom in this scheme. As a result, this scheme is very suitable to realize the ground cooling of an optomechanical resonator in the experiment.
We present a scheme for ground-state cooling of a mechanical resonator by simultaneously coupling it to a superconducting qubit and a cavity field. The Hamiltonian describing the hybrid system dynamics is systematically derived. The cooling process is driven by a red-detuned ac drive on the qubit and a laser drive on the optomechanical cavity. We have investigated cooling in the weak and the strong coupling regimes for both the individual system, i.e., qubit assisted cooling and optomechanical cooling, and compared them with the effective hybrid cooling. We show that in the weak coupling and resolved sideband regime, cooling is more efficient in the hybrid case for a specific choice of parameters. On the other hand, in the strong coupling, the hybrid cooling is found to be more effective compared to the individual cooling mechanisms in the resolved regimes.
We propose an alternative experimentally feasible approach to achieve high-efficiency ground-state cooling of a mechanical oscillator in an optomechanical system under the deeply unresolved sideband condition with the assistance of both intracavity and extracavity squeezing. In the scheme, a degenerate optical parametric amplifier is placed inside the optical cavity, generating the intracavity squeezing; in addition, the optical cavity is driven by the extracavity squeezed light, namely the extracavity squeezing. The quantum interference effect generated by intracavity squeezing and extracavity squeezing can completely suppress the nonresonant Stokes heating process while greatly enhancing the anti-Stokes cooling process. Therefore, the joint-squeezing scheme is capable of cooling the mechanical oscillators to their quantum ground state in a regime far away from the resolved sideband condition. Compared with other traditional optomechanical cooling schemes, the single-photon cooling rate in this joint-squeezing scheme can be tremendously enlarged by nearly three orders of magnitude. At the same time, the coupling strength required to achieve ground-state cooling can be significantly reduced. This scheme is promising for cooling large-mass and low-frequency mechanical oscillators, which provides a prerequisite for preparing and manipulating nonclassical states in macroscopic quantum systems and lays a significant foundation for quantum manipulation.
We study the mechanical effects of light on an atom trapped in a harmonic potential when an atomic dipole transition is driven by a laser and it is strongly coupled to a mode of an optical resonator. We investigate the cooling dynamics in the bad cavity limit, focusing on the case in which the effective transition linewidth is smaller than the trap frequency, hence when sideband cooling could be implemented. We show that quantum correlations between the mechanical actions of laser and cavity field can lead to an enhancement of the cooling efficiency with respect to sideband cooling. Such interference effects are found when the resonator losses prevail over spontaneous decay and over the rates of the coherent processes characterizing the dynamics.
Abstract We propose a ground state cooling scheme for an optomechanical resonator based on the system of a V-type three-level QD ensemble trapped in a two-mode cavity. The two-mode cavity was pumped by two different deriving fields. We studied the optomechanical cooling under the highly unresolved-sideband and beyond Lamb-Dicke regime (coupling strength between the cavity field and the phonon field not far less than the vibrational frequency). Our results show that the noise spectrum appeared a single peak when the detuning of the QD’s high excitation state and high-frequency driving field equals that of the QD’s low excitation state and low-frequency driving field, otherwise, then appeared double peaks. In the case of double peaks, we can realize the transition between optomechanical cooling and heating by changing the coupling strength of QD with cavity field, which is not available in the case of a single peak. We also studied the evolution of the mean phonon number with time, which is helpful to analyze ground state optomechanical cooling.
Ground-state cooling of mechanical resonators is a prerequisite for the observation of various quantum effects in optomechanical systems and thus has always been a crucial task in quantum optomechanics. In this paper, we study how to realize ground-state cooling of the mechanical mode in a Fano-mirror optomechanical setup, which allows for enhanced effective optomechanical interaction but typically works in the (deeply) unresolved-sideband regime. We reveal that for such a two-sided cavity geometry with very different decay rates at the two cavity mirrors, it is possible to cool the mechanical mode down to its ground state within a broad range of parameters by using an appropriate single-sided coherent feedback. This is possible even if the total optical loss is more than seven orders of magnitude larger than the mechanical frequency and the feedback efficiency is relatively low. Importantly, we show that a more standard double-sided feedback scheme is not appropriate to cooperate with a Fano-mirror system.