Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2306.03075 · Nature Communications

Preserving a qubit during state-destroying operations on an adjacent qubit at a few micrometers distance

Sainath Motlakunta, Nikhil Kotibhaskar, Chung-You Shih, Anthony Vogliano, Darian McLaren, Lewis Hahn, Jingwen Zhu, Roland Hablützel, Rajibul Islam

Published Aug 3, 2024• 14 citations
arXivHTMLPDF

Abstract

Protecting qubits from accidental measurements is essential for controlled quantum operations, especially during state-destroying measurements or resets on adjacent qubits, in protocols like quantum error correction. Current methods to preserve atomic qubits against such disturbances waste coherence time, extra qubits, and introduce additional errors. We demonstrate the feasibility of in-situ state-reset and state-measurement of trapped ions, achieving >99.9% fidelity in preserving an 'asset' ion-qubit while a neighboring 'process' qubit is reset, and >99.6% preservation fidelity while applying a detection beam for 11 μs on the same neighbor at a distance of 6 μm. This is achieved through precise wavefront control of addressing optical beams and using a single ion as both a quantum sensor for optical aberrations and an intensity probe with >50 dB dynamic range. Our demonstrations advance quantum processors, enhancing speed and capabilities for tasks like quantum simulations of dissipation and measurement-driven phases, and implementing error correction.

DOI
10.1038/s41467-024-50864-2

Related papers

Dissipative quantum error correction and application to quantum sensing with trapped ions

Florentin Reiter, Anders Søndberg Sørensen, P. Zoller +1 more

Quantum-enhanced measurements hold the promise to improve high-precision sensing ranging from the definition of time standards to the determination of fundamental constants of nature. However, quantum sensors lose their sensitivity in the presence of noise. To protect them, the use of quantum error-correcting codes has been proposed. Trapped ions are an excellent technological platform for both quantum sensing and quantum error correction. Here we present a quantum error correction scheme that harnesses dissipation to stabilize a trapped-ion qubit. In our approach, always-on couplings to an engineered environment protect the qubit against spin-flips or phase-flips. Our dissipative error correction scheme operates in a continuous manner without the need to perform measurements or feedback operations. We show that the resulting enhanced coherence time translates into a significantly enhanced precision for quantum measurements. Our work constitutes a stepping stone towards the paradigm of self-correcting quantum information processing.

arXiv:1702.08673•Nature Communications•Nov 22, 2017•158 citations

In situ midcircuit qubit measurement and reset in a single-species trapped-ion quantum computing system

Yichao Yu, Keqin Yan, Debopriyo Biswas +5 more

We implement midcircuit measurement and reset (MCMR) operations on a full-scale trapped-ion quantum computing system by using metastable qubit states in Yb + 171 ions. We compare two methods for isolating data qubits from measured qubits: one shelves the data qubits into the metastable state and the other drives the measured qubit to the metastable state without disturbing the other qubits. We experimentally demonstrate both methods on a crystal of two Yb + 171 ions using both the S 1 / 2 ground-state hyperfine clock qubit and the S 1 / 2 − D 3 / 2 optical qubit. These MCMR methods result in errors on the data qubit of about 2 % without degrading the measurement fidelity. With straightforward reductions in laser noise, these errors can be suppressed to less than 0.1 % . The demonstrated methods allow MCMR to be performed in a single-species ion chain without shuttling or additional qubit-addressing optics, greatly simplifying the system architecture and allowing straightforward integration with existing trapped-ion quantum computers.

arXiv:2504.12544•Physical Review Research•Nov 10, 2025•10 citations

Noninvasive mid-circuit measurement and reset on atomic qubits

Zuo-Yao Chen, Isabella Goetting, George Toh +8 more

Mid-circuit measurement and reset of subsets of qubits is a crucial ingredient of quantum error correction and many quantum information applications. Measurement of atomic qubits is accomplished through resonant fluorescence, which typically disturbs neighboring atoms due to photon scattering. We propose and prototype a new scheme for measurement that provides both spatial and spectral isolation by using tightly-focused individual laser beams and narrow atomic transitions. The unique advantage of this scheme is that all operations are applied exclusively to the read-out qubit, with negligible disturbance to the other qubits of the same species and little overhead. In this letter, we pave the way for non-invasive and high fidelity mid-circuit measurement and demonstrate all key building blocks on a single trapped barium ion.

arXiv:2504.12538•Physical Review A•Dec 10, 2025•4 citations

High Fidelity Single Qubit Manipulation in a Microfabricated Ion Trap

Emily Mount

The trapped atomic ion qubits feature desirable properties for use in a quantum computer such as long coherence times, high qubit readout fidelity, and universal logic gates. While these essential properties have been demonstrated, the ability to scale a trapped ion quantum system has not yet been shown. The challenge of scaling the system calls for methods to realize high-fidelity logic gates in scalable trap structures. Surface electrode ion traps, that are microfabricated from a silicon substrate, provide a scalable platform for trapping ion qubits only if high-fidelity operations are achievable in these structures. Here, we present a system for trapping and manipulating ions in a scalable surface trap. Trapping times exceeding 20 minutes without laser cooling, and heating rates as low as 0.8 quanta/ms indicate stable trapping conditions in these microtraps. Coherence times of more than one second verify adequate qubit and control field stability. We demonstrate low-error single-qubit gates performed using stimulated Raman transitions driven by lasers that are tightly focused on the ion qubit. Digital feedback loops are implemented to control the driving field's amplitude and frequency. Gate errors are measured using a randomized benchmarking protocol for single qubit gates, where residual amplitude error in the control beam is compensated using various pulse sequence techniques. Using pulse compensation, we demonstrate single qubit gates with an average error per randomized Clifford group gate of $3.6(3)\\times10^{-4}$, which is below the fault-tolerant threshold for some error-correction schemes.

•Jan 1, 2015•0 citations

Probing qubit memory errors at the 10^−5 level

J. E. Tarlton

Trapped atomic ions are a promising candidate system for developing a quantum computer. All elementary operations for quantum information processing have al- ready been achieved in trapped-ion systems with errors below the “fault-tolerant threshold”, meaning that these errors are sufficiently small to be removed with quan- tum error correction. However, the preservation of quantum information over the short timescales that are relevant for quantum computing has not, to our knowledge, been measured before in trapped-ion qubits. Previous investigations have measured decoherence over long times and extrapolated an exponential decay model to short times. We directly measure the qubit memory error rate over short timescales, which is made possible by the high-fidelity single-qubit gates and state preparation and mea- surement in our system. Our qubit is a hyperfine “atomic clock” transition in 43Ca+, and gates are applied with near-field microwaves. We find that the assumption of exponential decay of qubit state coherence does not apply in our system. The data is fit well by a model of 1/f frequency noise with a low-frequency cutoff. The small- est memory error that we measure is 3(1)×10−6 over 2ms. The time at which our qubit memory error is 1×10−3, an important threshold for viable quantum error correction, is ≈400ms. We also present a design study into a new ion trap electrode geometry for applying near-field microwave two-qubit gates. This design features an ‘S’-shaped meander electrode to passively null the microwave field at the ions’ locations. It has improved isolation between the meander and other electrodes compared to previous work on this, which should reduce the sensitivity of the microwave field distribution to the boundary conditions of these electrodes. We show that the trap would allow for ion chains to be trapped, transported and split with feasible DC and RF voltages.

•Feb 1, 2018•3 citations

Experimental demonstration of quantum fault tolerance

Norbert M. Linke, Marco Gutiérrez, K. A. Landsman +4 more

Quantum computers will eventually reach a size at which quantum error correction becomes imperative. Quantum information can be protected from qubit imperfections and flawed control operations by encoding a single logical qubit in multiple physical qubits. This redundancy allows the extraction of error syndromes and the subsequent detection or correction of errors without destroying the logical state itself through direct measurement. Here we show the encoding and syndrome measurement of a fault-tolerant logical qubit via an error detection protocol on four physical qubits, represented by trapped atomic ions. This demonstrates for the first time the robustness of a fault-tolerant qubit to imperfections in the very operations used to encode it. The advantage persists in the face of large added error rates and experimental calibration errors.

•Nov 21, 2016•3 citations
Protecting qubits from accidental measurements is essential for controlled quantum operations, especially during state-destroying measurements or resets on adjacent qubits, in protocols like quantum error correction. Current methods to preserve atomic qubits against such disturbances waste coherence time, extra qubits, and introduce additional errors. We demonstrate the feasibility of in-situ state-reset and state-measurement of trapped ions, achieving >99.9% fidelity in preserving an 'asset' ion-qubit while a neighboring 'process' qubit is reset, and >99.6% preservation fidelity while applying a detection beam for 11 μs on the same neighbor at a distance of 6 μm. This is achieved through precise wavefront control of addressing optical beams and using a single ion as both a quantum sensor for optical aberrations and an intensity probe with >50 dB dynamic range. Our demonstrations advance quantum processors, enhancing speed and capabilities for tasks like quantum simulations of dissipation and measurement-driven phases, and implementing error correction.
Quantum-enhanced measurements hold the promise to improve high-precision sensing ranging from the definition of time standards to the determination of fundamental constants of nature. However, quantum sensors lose their sensitivity in the presence of noise. To protect them, the use of quantum error-correcting codes has been proposed. Trapped ions are an excellent technological platform for both quantum sensing and quantum error correction. Here we present a quantum error correction scheme that harnesses dissipation to stabilize a trapped-ion qubit. In our approach, always-on couplings to an engineered environment protect the qubit against spin-flips or phase-flips. Our dissipative error correction scheme operates in a continuous manner without the need to perform measurements or feedback operations. We show that the resulting enhanced coherence time translates into a significantly enhanced precision for quantum measurements. Our work constitutes a stepping stone towards the paradigm of self-correcting quantum information processing.
We implement midcircuit measurement and reset (MCMR) operations on a full-scale trapped-ion quantum computing system by using metastable qubit states in Yb + 171 ions. We compare two methods for isolating data qubits from measured qubits: one shelves the data qubits into the metastable state and the other drives the measured qubit to the metastable state without disturbing the other qubits. We experimentally demonstrate both methods on a crystal of two Yb + 171 ions using both the S 1 / 2 ground-state hyperfine clock qubit and the S 1 / 2 − D 3 / 2 optical qubit. These MCMR methods result in errors on the data qubit of about 2 % without degrading the measurement fidelity. With straightforward reductions in laser noise, these errors can be suppressed to less than 0.1 % . The demonstrated methods allow MCMR to be performed in a single-species ion chain without shuttling or additional qubit-addressing optics, greatly simplifying the system architecture and allowing straightforward integration with existing trapped-ion quantum computers.
Mid-circuit measurement and reset of subsets of qubits is a crucial ingredient of quantum error correction and many quantum information applications. Measurement of atomic qubits is accomplished through resonant fluorescence, which typically disturbs neighboring atoms due to photon scattering. We propose and prototype a new scheme for measurement that provides both spatial and spectral isolation by using tightly-focused individual laser beams and narrow atomic transitions. The unique advantage of this scheme is that all operations are applied exclusively to the read-out qubit, with negligible disturbance to the other qubits of the same species and little overhead. In this letter, we pave the way for non-invasive and high fidelity mid-circuit measurement and demonstrate all key building blocks on a single trapped barium ion.
The trapped atomic ion qubits feature desirable properties for use in a quantum computer such as long coherence times, high qubit readout fidelity, and universal logic gates. While these essential properties have been demonstrated, the ability to scale a trapped ion quantum system has not yet been shown. The challenge of scaling the system calls for methods to realize high-fidelity logic gates in scalable trap structures. Surface electrode ion traps, that are microfabricated from a silicon substrate, provide a scalable platform for trapping ion qubits only if high-fidelity operations are achievable in these structures. Here, we present a system for trapping and manipulating ions in a scalable surface trap. Trapping times exceeding 20 minutes without laser cooling, and heating rates as low as 0.8 quanta/ms indicate stable trapping conditions in these microtraps. Coherence times of more than one second verify adequate qubit and control field stability. We demonstrate low-error single-qubit gates performed using stimulated Raman transitions driven by lasers that are tightly focused on the ion qubit. Digital feedback loops are implemented to control the driving field's amplitude and frequency. Gate errors are measured using a randomized benchmarking protocol for single qubit gates, where residual amplitude error in the control beam is compensated using various pulse sequence techniques. Using pulse compensation, we demonstrate single qubit gates with an average error per randomized Clifford group gate of 3.6(3)times10−43.6(3)\\times10^{-4}3.6(3)times10−4, which is below the fault-tolerant threshold for some error-correction schemes.
Trapped atomic ions are a promising candidate system for developing a quantum computer. All elementary operations for quantum information processing have al- ready been achieved in trapped-ion systems with errors below the “fault-tolerant threshold”, meaning that these errors are sufficiently small to be removed with quan- tum error correction. However, the preservation of quantum information over the short timescales that are relevant for quantum computing has not, to our knowledge, been measured before in trapped-ion qubits. Previous investigations have measured decoherence over long times and extrapolated an exponential decay model to short times. We directly measure the qubit memory error rate over short timescales, which is made possible by the high-fidelity single-qubit gates and state preparation and mea- surement in our system. Our qubit is a hyperfine “atomic clock” transition in 43Ca+, and gates are applied with near-field microwaves. We find that the assumption of exponential decay of qubit state coherence does not apply in our system. The data is fit well by a model of 1/f frequency noise with a low-frequency cutoff. The small- est memory error that we measure is 3(1)×10−6 over 2ms. The time at which our qubit memory error is 1×10−3, an important threshold for viable quantum error correction, is ≈400ms. We also present a design study into a new ion trap electrode geometry for applying near-field microwave two-qubit gates. This design features an ‘S’-shaped meander electrode to passively null the microwave field at the ions’ locations. It has improved isolation between the meander and other electrodes compared to previous work on this, which should reduce the sensitivity of the microwave field distribution to the boundary conditions of these electrodes. We show that the trap would allow for ion chains to be trapped, transported and split with feasible DC and RF voltages.
Quantum computers will eventually reach a size at which quantum error correction becomes imperative. Quantum information can be protected from qubit imperfections and flawed control operations by encoding a single logical qubit in multiple physical qubits. This redundancy allows the extraction of error syndromes and the subsequent detection or correction of errors without destroying the logical state itself through direct measurement. Here we show the encoding and syndrome measurement of a fault-tolerant logical qubit via an error detection protocol on four physical qubits, represented by trapped atomic ions. This demonstrates for the first time the robustness of a fault-tolerant qubit to imperfections in the very operations used to encode it. The advantage persists in the face of large added error rates and experimental calibration errors.