Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2305.20060 · AVS Quantum Science

Centralized design and production of the ultra-high vacuum and laser-stabilization systems for the AION ultra-cold strontium laboratories

Ben Stray, O. Ennis, Sam Hedges, S. Dey, Mehdi Langlois, Kai Bongs, Samuel Lellouch, Michael Holynski, B. Bostwick, Jing Chen, Z. Eyler, V. Gibson, T. L. Harte, C. C. Hsu, M. Karzazi, J. Mitchell, Noam Mouelle, Ulrich Schneider, Yijun Tang, Kimberly E. Tkalcec, Y. Zhi, K. Clarke, A. Vick, Kieran Bridges, J. P. Coleman, Gedminas Elertas, Leonie Hawkins, Sam Hindley, K. Hussain, C. J. Metelko, H. Throssell, Charles F. A. Baynham, O. L. Buchmueller, D. Evans, Richard Hobson, L. Iannizzotto-Venezze, A. Josset, Elizabeth Pasatembou, B. E. Sauer, Michael R. Tarbutt, Leonardo Badurina, Ankit Beniwal, Diego Blas, J. Carlton, John R. Ellis, Christopher McCabe, Elliot Bentine, Martin J. Booth, D. Bortoletto, Christopher J. Foot, C. M. Gómez-Monedero Castellanos, T. M. Hird, K. Hughes, A. James, A. Lowe, John March-Russell, J. Schelfhout, Ian P. J. Shipsey, D. Weatherill, D. Wood, S. Balashov, Mark G. Bason, J. Boehm, M.J.D. Courthold, M. van der Grinten, P. Majewski, A. L. Marchant, D. M. Newbold, Zhongben Pan, Z. Tam, T. Valenzuela, I. Wilmut

Published Mar 1, 2024• 11 citations
arXivHTMLPDF

Abstract

This paper outlines the centralized design and production of the ultra-high-vacuum sidearm and laser-stabilization systems for the AION Ultra-Cold Strontium Laboratories. Commissioning data on the residual gas and steady-state pressures in the sidearm chambers, on magnetic field quality, on laser stabilization, and on the loading rate for the 3D magneto-optical trap are presented. Streamlining the design and production of the sidearm and laser stabilization systems enabled the AION Collaboration to build and equip in parallel five state-of-the-art Ultra-Cold Strontium Laboratories within 24 months by leveraging key expertise in the collaboration. This approach could serve as a model for the development and construction of other cold atom experiments, such as atomic clock experiments and neutral atom quantum computing systems, by establishing dedicated design and production units at national laboratories.

DOI
10.1116/5.0172731

Related papers

Construction of an experiment providing cold strontium atoms for atomic interferometry in a ring cavity

Michelle A. Moreno-Armijos

This thesis describes the first steps to fulfill the main objective of our project: the development of a gravimetry system based on the continuous monitoring of Bloch oscillations performed by ultra-cold strontium atoms.The realization of this project comprises three main stages: the first stage consists in obtaining a magneto-optical trap in the broad transition of 461 nm of strontium, the second stage is the transfer to a magneto-optical trap in the narrow intercombination line of 689 nm, and finally the third stage is the monitoring of Bloch oscillations of the cloud of atoms in a ring cavity.This work details the first stage of the project, the creation of an experimental apparatus which produces ultra-cold strontium atoms in the transition of 461 nm, as well as the characterization of the cloud of atoms, temperature, size, number of atoms, etc.For this project, a new experimental apparatus has been designed and realized.It involves an ultra-high vacuum system, magnetic field sources, laser systems and optical instruments which are required for cooling, trapping and repumping strontium atoms.A novel feature is the implementation of a transversely loaded two-dimensional magneto-optical trap, which serves as a source of a cold strontium atomic beam.A loading rate of the atomic beam into a nearby three-dimensional magneto-optical trap exceeding 10 5 s -1 for the 88 Sr isotope at a moderate dispenser temperature of 600 • C are reported.The temperature of the cloud is about 4 mK and its size 0.3 mm, these characteristics suggest that the state of the atomic trap is in optimal conditions to make the transfer to the optical magneto trap in the intercombination line and thus continue with the second stage of the project.

•Apr 1, 2020•2 citations

A high-flux source of cold strontium with a loading rate of 4×1010 atoms/s for open release

Thomas Walker, A. L. Marchant, Elliot Bentine +17 more

We present a high-flux source of cold strontium atoms based on a two-dimensional magneto-optical trap (2D MOT) and a Zeeman slower. We use the source to load a 3D MOT in a separate science chamber, observing a loading rate of 4×1010 atoms/s—to our knowledge, the highest reported loading flux for strontium. To characterize the vacuum pressure in the science chamber, we load the atoms into a magnetic trap and measure a lifetime of between 8 and 24 s, depending on the oven temperature. Finally, we characterize the atom flux and velocity distributions from the oven and from the 2D MOT source, finding reasonable agreement with models in the free molecular flow regime. Our results show that it is possible to readily produce a cold strontium flux at comparable levels to those of alkali species, at oven temperatures compatible with long-term operation, and at vacuum pressures suitable for state-of-the-art quantum experiments. We make our design available at no cost to benefit researchers in the quantum community.

arXiv:2603.25312•AVS Quantum Science•Jul 10, 2026•0 citations

Progress toward ultra-cold Sr for the AION project—A red MOT and an optical-heterodyne diagnostic tool for injection-locked laser diodes

Elizabeth Pasatembou, Charles F. A. Baynham, O. Buchmüller +4 more

Long-baseline atom interferometers, such as the one to be built by the AION collaboration, require ultra-cold atomic clouds. These are produced by trapping the atoms in magneto-optical traps (MOTs) using high-power, narrow-linewidth lasers. We report on the laser and optical master–slave injection-locked system used to address the 1S0–3P1 strontium transition at 689 nm and on the trapping of strontium atoms in a narrowband MOT. We demonstrate the quality of the injection through the characterization of the injection lock using an easy-to-assemble method that uses a double-pass acousto-optic modulator to generate and detect a heterodyne beatnote. The reported system is used to produce an atomic cloud at a temperature of 812(43) nK in a narrowband red MOT.

arXiv:2310.08500•AVS Quantum Science•Mar 1, 2024•2 citations

Direct loading of a Sr magneto-optical trap from a thermal atomic beam

Naohiro Okamoto, Takumi Sato, T. Aoki +1 more

We demonstrate direct loading of a strontium (Sr) magneto-optical trap (MOT) from a thermal atomic beam in a single-chamber vacuum system. The MOT operates without a Zeeman slower, a slowing laser, a two-dimensional MOT, or differential pumping, while the entire system is maintained in the ultra-high-vacuum regime by a single ion pump. At an oven temperature of 395 °C, the MOT captures up to 107 88Sr atoms with a loading rate of 107 atoms s-1, while sustaining a background gas pressure of 1 × 10-9 Torr. At this oven temperature, the MOT lifetime limited by collisions with background gas is ∼5s, with the atom number primarily constrained by light-assisted two-body collisions. Eliminating differential pumping and precooling stages significantly reduces the system's size, weight, and power requirements, providing a robust and practical platform for field-deployable and spaceborne optical lattice clocks, as well as a variety of other applications requiring compact ultracold atom sources.

arXiv:2509.13764•Review of Scientific Instruments•Mar 1, 2026•3 citations

A new design of a compact strontium cold-atom source

Dongyang Xu

A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.

•Jan 1, 2020•0 citations

Laser Cooling, Trapping, and Coherent Control of Strontium Monofluoride Molecules

Qian Wang

Ultracold polar molecules have emerged as promising platforms for quantum simulation, quantum information science, precision measurements of fundamental symmetry violations, and quantum chemistry. Over the past decade, rapid progress in direct laser cooling of molecules has enabled new capabilities such as magneto-optical traps (MOTs), sub-Doppler cooling, and optical dipole traps (ODTs), expanding the quantum toolbox with ultracold molecules of complex internal structures and strong dipolar interactions. This thesis presents the design, construction, and operation of an experiment on ultracold strontium monofluoride (88Sr19F) molecules, demonstrating state-of-the-art techniques for molecular laser cooling and trapping. The apparatus integrates a broad range of technical sub-systems, including cryogenics, ultra-high vacuum, optics, electronics, and automated laboratory control software. SrF molecules produced in a slowed cryogenic buffer gas beam are captured into a dual-frequency MOT. Subsequent Λ-enhanced gray molasses cooling reduces the molecule temperature to as low as 5 μK. A novel blue-detuned MOT is also implemented to further compress the molecular cloud, increasing the density by a factor of ∼ 400. At this high density, SrF molecules are efficiently loaded into an ODT, a tight, conservative trap with long lifetimes. Population transfer between different rotational levels is achieved via optical pumping and coherent microwave control, yielding ∼ 0.8 ms coherence time in Rabi oscillation and ∼ 90 % transfer efficiency. This thesis also describes the development of an ultracold rubidium (87Rb) atom experiment, in which a loading rate of ∼ 10^10 atoms/s into a radio-frequency (RF) MOT is demonstrated. A modular two-dimensional MOT serves as the Rb source and can be seamlessly integrated into the SrF apparatus, opening the possibility for future studies of co-trapping and sympathetic cooling of SrF molecules with atoms. The results presented in this thesis establish an experimental foundation for exploring new frontiers in ultracold molecular physics.

•Dec 1, 2025•0 citations
This paper outlines the centralized design and production of the ultra-high-vacuum sidearm and laser-stabilization systems for the AION Ultra-Cold Strontium Laboratories. Commissioning data on the residual gas and steady-state pressures in the sidearm chambers, on magnetic field quality, on laser stabilization, and on the loading rate for the 3D magneto-optical trap are presented. Streamlining the design and production of the sidearm and laser stabilization systems enabled the AION Collaboration to build and equip in parallel five state-of-the-art Ultra-Cold Strontium Laboratories within 24 months by leveraging key expertise in the collaboration. This approach could serve as a model for the development and construction of other cold atom experiments, such as atomic clock experiments and neutral atom quantum computing systems, by establishing dedicated design and production units at national laboratories.
This thesis describes the first steps to fulfill the main objective of our project: the development of a gravimetry system based on the continuous monitoring of Bloch oscillations performed by ultra-cold strontium atoms.The realization of this project comprises three main stages: the first stage consists in obtaining a magneto-optical trap in the broad transition of 461 nm of strontium, the second stage is the transfer to a magneto-optical trap in the narrow intercombination line of 689 nm, and finally the third stage is the monitoring of Bloch oscillations of the cloud of atoms in a ring cavity.This work details the first stage of the project, the creation of an experimental apparatus which produces ultra-cold strontium atoms in the transition of 461 nm, as well as the characterization of the cloud of atoms, temperature, size, number of atoms, etc.For this project, a new experimental apparatus has been designed and realized.It involves an ultra-high vacuum system, magnetic field sources, laser systems and optical instruments which are required for cooling, trapping and repumping strontium atoms.A novel feature is the implementation of a transversely loaded two-dimensional magneto-optical trap, which serves as a source of a cold strontium atomic beam.A loading rate of the atomic beam into a nearby three-dimensional magneto-optical trap exceeding 10 5 s -1 for the 88 Sr isotope at a moderate dispenser temperature of 600 • C are reported.The temperature of the cloud is about 4 mK and its size 0.3 mm, these characteristics suggest that the state of the atomic trap is in optimal conditions to make the transfer to the optical magneto trap in the intercombination line and thus continue with the second stage of the project.
We present a high-flux source of cold strontium atoms based on a two-dimensional magneto-optical trap (2D MOT) and a Zeeman slower. We use the source to load a 3D MOT in a separate science chamber, observing a loading rate of 4×1010 atoms/s—to our knowledge, the highest reported loading flux for strontium. To characterize the vacuum pressure in the science chamber, we load the atoms into a magnetic trap and measure a lifetime of between 8 and 24 s, depending on the oven temperature. Finally, we characterize the atom flux and velocity distributions from the oven and from the 2D MOT source, finding reasonable agreement with models in the free molecular flow regime. Our results show that it is possible to readily produce a cold strontium flux at comparable levels to those of alkali species, at oven temperatures compatible with long-term operation, and at vacuum pressures suitable for state-of-the-art quantum experiments. We make our design available at no cost to benefit researchers in the quantum community.
Long-baseline atom interferometers, such as the one to be built by the AION collaboration, require ultra-cold atomic clouds. These are produced by trapping the atoms in magneto-optical traps (MOTs) using high-power, narrow-linewidth lasers. We report on the laser and optical master–slave injection-locked system used to address the 1S0–3P1 strontium transition at 689 nm and on the trapping of strontium atoms in a narrowband MOT. We demonstrate the quality of the injection through the characterization of the injection lock using an easy-to-assemble method that uses a double-pass acousto-optic modulator to generate and detect a heterodyne beatnote. The reported system is used to produce an atomic cloud at a temperature of 812(43) nK in a narrowband red MOT.
We demonstrate direct loading of a strontium (Sr) magneto-optical trap (MOT) from a thermal atomic beam in a single-chamber vacuum system. The MOT operates without a Zeeman slower, a slowing laser, a two-dimensional MOT, or differential pumping, while the entire system is maintained in the ultra-high-vacuum regime by a single ion pump. At an oven temperature of 395 °C, the MOT captures up to 107 88Sr atoms with a loading rate of 107 atoms s-1, while sustaining a background gas pressure of 1 × 10-9 Torr. At this oven temperature, the MOT lifetime limited by collisions with background gas is ∼5s, with the atom number primarily constrained by light-assisted two-body collisions. Eliminating differential pumping and precooling stages significantly reduces the system's size, weight, and power requirements, providing a robust and practical platform for field-deployable and spaceborne optical lattice clocks, as well as a variety of other applications requiring compact ultracold atom sources.
A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.
Ultracold polar molecules have emerged as promising platforms for quantum simulation, quantum information science, precision measurements of fundamental symmetry violations, and quantum chemistry. Over the past decade, rapid progress in direct laser cooling of molecules has enabled new capabilities such as magneto-optical traps (MOTs), sub-Doppler cooling, and optical dipole traps (ODTs), expanding the quantum toolbox with ultracold molecules of complex internal structures and strong dipolar interactions. This thesis presents the design, construction, and operation of an experiment on ultracold strontium monofluoride (88Sr19F) molecules, demonstrating state-of-the-art techniques for molecular laser cooling and trapping. The apparatus integrates a broad range of technical sub-systems, including cryogenics, ultra-high vacuum, optics, electronics, and automated laboratory control software. SrF molecules produced in a slowed cryogenic buffer gas beam are captured into a dual-frequency MOT. Subsequent Λ-enhanced gray molasses cooling reduces the molecule temperature to as low as 5 μK. A novel blue-detuned MOT is also implemented to further compress the molecular cloud, increasing the density by a factor of ∼ 400. At this high density, SrF molecules are efficiently loaded into an ODT, a tight, conservative trap with long lifetimes. Population transfer between different rotational levels is achieved via optical pumping and coherent microwave control, yielding ∼ 0.8 ms coherence time in Rabi oscillation and ∼ 90 % transfer efficiency. This thesis also describes the development of an ultracold rubidium (87Rb) atom experiment, in which a loading rate of ∼ 10^10 atoms/s into a radio-frequency (RF) MOT is demonstrated. A modular two-dimensional MOT serves as the Rb source and can be seamlessly integrated into the SrF apparatus, opening the possibility for future studies of co-trapping and sympathetic cooling of SrF molecules with atoms. The results presented in this thesis establish an experimental foundation for exploring new frontiers in ultracold molecular physics.