Abstract The two-qubit controlled-NOT gate is one of the central entangling operations in quantum information technology. The controlled-NOT gate for single photon qubits is normally realized as a network of five individual beamsplitters on six optical modes. Quantum walks (QWs) are an alternative photonic architecture involving arrays of coupled waveguides, which have been successful for investigating condensed matter physics, however, have not yet been applied to quantum logical operations. Here, we engineer the tight-binding Hamiltonian of an array of lithium niobate-on-insulator waveguides to experimentally demonstrate the two-qubit controlled-NOT gate in a QW. We measure the two-qubit transfer matrix with 0.938 ± 0.003 fidelity, and we use the gate to generate entangled qubits with 0.945 ± 0.002 fidelity by preparing the control photon in a superposition state. Our results highlight a new application for QWs that use a compact multi-mode interaction region to realize large multi-component quantum circuits.
Abstract The two-qubit controlled-NOT gate is one of the central entangling operations in quantum information technology. The controlled-NOT gate for single photon qubits is normally realized as a network of five individual beamsplitters on six optical modes. Quantum walks (QWs) are an alternative photonic architecture involving arrays of coupled waveguides, which have been successful for investigating condensed matter physics, however, have not yet been applied to quantum logical operations. Here, we engineer the tight-binding Hamiltonian of an array of lithium niobate-on-insulator waveguides to experimentally demonstrate the two-qubit controlled-NOT gate in a QW. We measure the two-qubit transfer matrix with 0.938 ± 0.003 fidelity, and we use the gate to generate entangled qubits with 0.945 ± 0.002 fidelity by preparing the control photon in a superposition state. Our results highlight a new application for QWs that use a compact multi-mode interaction region to realize large multi-component quantum circuits.
Photonic quantum walks (PQWs), realized in lattices of evanescently coupled waveguides, are a powerful platform for demonstrating quantum [1], topological [2] and localization phenomena [3]. The PQW dynamics are captured with a tight-binding Hamiltonian, whose parameters can be engineered with the geometry of the waveguide array. It has been proposed that the two-qubit controlled-NOT (CNOT) gate can be implemented by quantum interference of two-photons in a carefully engineered PQW [4]. Whereas photonic quantum logic gates typically rely on a network of beamsplitters [5], the PQW implements the quantum logic in a single step. While multi-photon experiments in PQWs have been demonstrated [1]–[3], where photon-photon bunching governs the dynamics, the controlled preparation of entangling logic gates is yet to be experimentally explored.
Time-bin qubits, where information is encoded in a single photon at different times, have been widely used in optical-fiber- and waveguide-based quantum communications. With the recent developments in distributed quantum computation, it is logical to ask whether time-bin encoded qubits may be useful in that context. We have recently realized a time-bin qubit controlled-phase (C-phase) gate using a $2\ifmmode\times\else\texttimes\fi{}2$ optical switch based on a lithium-niobate waveguide, with which we demonstrated the generation of an entangled state. However, the experiment was performed with only a pair of input states and thus the functionality of the C-phase gate was not fully verified. In this research, we use quantum process tomography to establish a process fidelity of $97.1\mathrm{%}$. Furthermore, we demonstrate the controlled-not gate operation with a process fidelity greater than $94\mathrm{%}$. This study confirms that typical two-qubit logic gates used in quantum computational circuits can be implemented with time-bin qubits and thus it is a significant step forward for the realization of distributed quantum computation based on time-bin qubits.
Lithium niobate photonic circuits have the salutary property of permitting the generation, transmission, and processing of photons to be accommodated on a single chip. Compact photonic circuits such as these, with multiple components integrated on a single chip, are crucial for efficiently implementing quantum information processing schemes.We present a set of basic transformations that are useful for manipulating modal qubits in Ti:LiNbO(3) photonic quantum circuits. These include the mode analyzer, a device that separates the even and odd components of a state into two separate spatial paths; the mode rotator, which rotates the state by an angle in mode space; and modal Pauli spin operators that effect related operations. We also describe the design of a deterministic, two-qubit, single-photon, CNOT gate, a key element in certain sets of universal quantum logic gates. It is implemented as a Ti:LiNbO(3) photonic quantum circuit in which the polarization and mode number of a single photon serve as the control and target qubits, respectively. It is shown that the effects of dispersion in the CNOT circuit can be mitigated by augmenting it with an additional path. The performance of all of these components are confirmed by numerical simulations. The implementation of these transformations relies on selective and controllable power coupling among single- and two-mode waveguides, as well as the polarization sensitivity of the Pockels coefficients in LiNbO(3).
We demonstrate experimentally simultaneous photon-pair generation and quantum walks in a lithium niobate waveguide array, where the output photon correlations can be controlled by varying the temperature-dependent phase-matching, switching from classical to quantum statistics. Integrated optical quantum circuits are increasingly gaining attention as a solution for scalable quantum technologies with important application to quantum simulations [1]. A key mechanism for such quantum simulations can be provided by the process of quantum walks, which in quantum optics is enabled in an array of coupled optical waveguides. However, in all integrated quantum walk schemes to date, the correlated photon pairs have been generated externally to the waveguide array (WGA), making it only a passive circuit. Here we experimentally demonstrate an active quantum circuit, where the WGA is used for both photonpair generation and quantum walks of the generated photons. We show that the output photon statistics can be controlled classically by changing the phase matching conditions for photon-pair generation, which allows for controllable engineering of the spatial quantum correlations exhibited through a quantum walk [4]. Importantly, this integrated scheme also allows avoiding input losses from the state generation to the waveguides. This is crucial as input losses in devices with linear coupled waveguides currently limit feasible experimental data acquisition times and hinder possible applications. In our experiments we use an x-cut LiNbO3 WGA [see Fig. 1(a)] fabricated by titanium indiffusion [5], which consists of 40 waveguides with a spacing of 14mm. A single waveguide of the WGA is excited by a continuous wave (CW) solid state laser at a wavelength of 671nm [see Fig. 1(b)]. The WGA is kept at a temperature of ~360C (with an accuracy of 0.1C) to phase-match the Type-I (oo-e) spontaneous parametric down-conversion (SPDC) process. At the pump wavelength the mode is well confined to the central waveguide and does not show evanescent coupling to the neighboring waveguides [see Fig. 1(a)]. However, for the generated low-frequency SPDC photons the waveguide modes extend towards the neighboring waveguides and can couple through the array experiencing quantum walks. Thus the generated output photon pairs demonstrate nontrivial photon statistics. Experimentally, we measure the photon-pair correlations at a wavelength of 1342 ± 6nm (filtered by an interference filter) on two cooled InGaAs single photon detectors (IDQuantique 210) in free-running mode [see Fig. 1(b)]. The non-polarizing beamsplitter is used to separate two photons of a pair with 50% efficiency, while irises allow for individual waveguide output selection. The resulting correlation measurements are shown in Fig. 2(a), where the coincidence counts are normalized with respect to the coupling efficiency. We observe that for a sample temperature of T = 364.5C close to degenerate SPDC phase-matching, photons from down-converted pairs leave the WGA from the same waveguide {-1,-1}, {0,0} or {1,1} (here two numbers correspond to two SPDC photons), defined as bunching, or from the opposite waveguides {-1,1} or {1,-1} defined as antibunching. The highest coincidence rate is achieved in the {0,0} case, since photon pairs are generated in waveguide 0 along the whole length of the WGA. Photon pairs coming from the other waveguides, namely {-1,0}, {1,0}, {0,-1} and {0,1} lead to less coincidences. This means that probabilities of photon bunching and antibunching are simultaneously dominant, which implies a highly non-trivial Paper code: Fig. 1. (a) Schematic representation of LiNbO3 WGA with pump (blue) coupled to a central waveguide and SPDC photon pairs (red) generated in the central waveguide and propagating in the WGA in the regime of quantum walks. (b) Schematic of the experimental setup. entangled state [3]. The theoretical quantum simulations of the process based on Ref. [4] [Fig. 2(b)] are in good agreement with our experiment. To demonstrate the reconfigurability of the device we also measure the correlation of the antibunched photons in waveguide {-1,1} as the temperature is varied, shown in Fig. 2(c). The theory developed for WGAs (blue curve), taking into account structural and temperature-related inhomogeneities in the sample, fits well the experimental data (red circles with error bars). This demonstrates that changing the temperature affects the coincidence counts from various waveguides, allowing control of the output photon statistics and revealing a route to reconfigurable quantum simulations based on walks. To conclude, our work opens a path for implementing combined photon-pair generation and quantum walks for engineering of spatial quantum states in novel active quantum integrated circuits.
Abstract Quantum walks (QWs) are one of the fundamental concepts in quantum information science, being an essential component for various new applications. Implementing QWs using integrated photonic waveguide lattices allows for realizing long evolution times, for exploring novel lattice geometries, and even for controllable coupling to the environment. This tutorial gives an introduction to the field of on-chip QWs of single photons and photon pairs featuring non-classical two-photon correlations.
Controlled and multi-controlled quantum gates, whose action on a target qubit depends on the state of multiple control qubits, represent a fundamental logical building block for complex quantum algorithms. We propose a scheme for realizing this class of gates based on non-Abelian holonomies in modulated photonic waveguide networks. Our approach relies on linear photonic cicuits formed by two star networks coupled via a two-path circuit. A star network with M peripheral waveguides coupled to a single central site, or M-pod, naturally generalizes the tripod structure used in non-Abelian Thouless pumping and stimulated Raman adiabatic passage (STIRAP). In the present work, we first analyze the minimal case of two connected tripods and design adiabatic driving loops that implement single-qubit, CNOT, and SWAP gates. We then show how extending the approach to larger M-pod structures enables the realization of multiply controlled operations, which we exemplify by designing Toffoli and the OR gate on two coupled pentapods. Finally, we demonstrate that networks of connected tripods can implement the Deutsch quantum query algorithm.