Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2305.06409 · AIP Advances

Optimal protocols for entangling gates inN-qubit atomic systems

Ignacio R. Solá, Seokmin Shin, Bo Y. Chang

Published Nov 1, 2023• 3 citations
arXivHTMLPDF

Abstract

We use a novel optimization procedure that includes the temporal and spatial parameters of the pulses acting on arrays of trapped neutral atoms to prepare entangling gates in N-qubit systems. The spatiotemporal control allows treating a denser array of atoms, where each pulse acts on a subset of the qubits, potentially allowing to speed up the gate operation by two orders of magnitude by boosting the dipole-blockade between the Rydberg states. Studying the rate of success of the algorithm under different constraints, we evaluate the impact of the proximity of the atoms and, indirectly, the role of the geometry of the arrays in three and four-qubit systems, as well as the minimal energy requirements and how this energy is used among the different qubits. Finally, we characterize and classify all optimal protocols according to the mechanism of the gate using a quantum pathway analysis.

DOI
10.1063/5.0171334

Related papers

Finding, mapping, and classifying optimal protocols for two-qubit entangling gates

Ignacio R. Solá, Seokmin Shin, Bo Y. Chang

We characterize the set of optimal protocols for two-qubit entangling gates through a mechanism analysis based on quantum pathways, which allows us to compare and rank the different solutions. As an example of a flexible platform with a rich landscape of protocols, we consider trapped neutral atoms excited to Rydberg states by different pulse sequences that extend over several atomic sites, optimizing both the temporal and the spatial features of the pulses. Studying the rate of success of the algorithm under different constraints, we analyze the impact of the proximity of the atoms on the nature and quality of the optimal protocols. We characterize in detail the features of the solutions in parameter space, showing some striking correlations among the set of parameters. Together with the mechanism analysis, the spatiotemporal control allows us to select protocols that operate under mechanisms by design, like finding needles in a haystack.

arXiv:2304.14322•Physical Review A•Sep 28, 2023•6 citations

Spatiotemporal Control of Trapped Rydberg Qubits

Ignacio R. Solá, Bo Y. Chang

We show how to implement faster high fidelity two-qubit gates on neutral atoms through the dipole blockade mechanism by exciting the qubits with the same pulses after optimizing both temporal and spatial parameters.

Quantum 2.0 Conference and Exhibition•Jan 1, 2022•0 citations

Optimal quantum gates \nfor Rydberg atoms quantum computer

Pagano, Alice

Arrays of identical neutral atoms trapped in optical tweezers are a promising candidate for use in quantum computing. These platforms are highly scalable to large numbers of qubits and neutral atoms boost several attractive features as long coherence times and the possibility to be entangled via strong dipole-dipole interactions by driving them to highly excited Rydberg states. \nThe Thesis work is developed inside the framework of the QRydDemo project, whose aim in the next few years is to realize a neutral atom quantum processor with several hundred qubits. The smallest building blocks for the quantum computer are one and two-qubit gates: to entangle two atoms in the quantum register, a controlled-phase (CZ) gate will be implemented by shining fine-tuned laser pulses onto them. In this work, after giving a theoretical description of the Hamiltonian of two neutral atoms in the quantum register, a numerical simulation of this system is exploited to reproduce the behavior of the two-qubit CZ gate. Realistic effects are taken into account as finite temperature, imperfect Rydberg blockade, or decay out of the Rydberg state. A protocol with constant pulses is analyzed and its optimal parameters are found through classical optimizers. Then, time-dependent pulses are introduced and the optimal pulses are found through the optimal control algorithm dCRAB in an open-loop optimization. For the experimental realization of the gate, this analysis is of pivotal importance to know in which aspect more effort has to be put to maximize the experimental precision of the operation and thus improving the performance of the whole device \n

•Sep 1, 2021•0 citations

Two-qubit entangling gates between distant atomic qubits in a lattice

Alexandre Cesa, John Martin

Arrays of qubits encoded in the ground-state manifold of neutral atoms trapped in optical (or magnetic) lattices appear to be a promising platform for the realization of a scalable quantum computer. Two-qubit conditional gates between nearest-neighbor qubits in the array can be implemented by exploiting the Rydberg blockade mechanism, as was shown by D. Jaksch et al. [Phys. Rev. Lett. 85, 2208 (2000)]. However, the energy shift due to dipole-dipole interactions causing the blockade falls off rapidly with the interatomic distance, and protocols based on direct Rydberg blockade typically fail to operate between atoms separated by more than one lattice site. In this work, we propose an extension of the protocol of Jaksch et al. for controlled-$Z$ and controlled-not gates which works in the general case where the qubits are not nearest neighbors in the array. Our proposal relies on the Rydberg excitation hopping along a chain of ancilla noncoding atoms connecting the qubits on which the gate is to be applied. The dependence of the gate fidelity on the number of ancilla atoms, the blockade strength, and the decay rates of the Rydberg states is investigated. A comparison between our implementation of a distant controlled-not gate and one based on a sequence of nearest-neighbor two-qubit gates is also provided.

arXiv:1703.01767•Physical Review A•May 16, 2017•12 citations

Quantum gates between distant atoms mediated by a Rydberg excitation antiferromagnet

Georgios Doultsinos, David Petrosyan

We present a novel protocol for implementing quantum gates between distant atomic qubits connected by an array of neutral atoms that play the role of a quantum bus. The protocol is based on adiabatically transferring the atoms in the array to an antiferromagnetic-like state of Rydberg excitations using chirped laser pulses. Upon exciting and deexciting the atoms in the array under the blockage of nearest neighbors, depending on the state of the two qubits, the system acquires a conditional geometric π -phase, while the dynamical phase cancels exactly, even when the atomic positions are disordered but nearly frozen in time, which requires sufficiently low temperatures. With experimentally relevant parameters, using smooth pulses minimizing the Rydberg-state decay and nonadiabatic errors, we obtain the gate times of 2– 3 µ s and gate fidelities of 0.99–0.98 for a pair of atoms separated by L = 20 – 30 µ m and connected by a quantum bus of several (three to six) atoms. Optimizing the pulses, we can obtain faster gates exhibiting even better fidelities than those with smooth adiabatic pulses.

arXiv:2408.11542•Physical Review Research•Jun 11, 2025•9 citations

Protocols of coherent motion control for an interaction-driven Rydberg gate

Valentin Magro, Wojciech Adamczyk, Sylvain de Léséleuc

Generating entanglement between two Rydberg atoms is at the core of neutral-atom quantum computers. Current two-qubit gates operate in the Rydberg-blockade regime, in which the full strength of the van der Waals interaction between the two Rydberg atoms is not directly exploited, to avoid sensitivity to the position noise of the tweezer-trapped atoms, at the cost of a longer time spent in the Rydberg state. Here, we propose a set of techniques based on coherent control of the atomic motion obtained by combining optical tweezers and a two-dimensional optical lattice, and a sequence of multiple on/off pulses. The protocols keep the two-qubit gate error contribution from position noise below $10^{-4}$, heat the atom by less than~$Δn = 0.01$, while being robust to alignment errors of the potential up to $50$~nm and thermal excitation up to $\bar{n} = 3$. This toolbox opens the path for new two-qubit Rydberg gates directly, or partially, driven by the interaction, in which the atoms spend only $\sim 10$~ns in the Rydberg state, minimizing the increasingly dominant error source originating from its finite lifetime.

physics.atom-phCross-listedarXiv:2607.23090•Jul 28, 2026•2 citations
We use a novel optimization procedure that includes the temporal and spatial parameters of the pulses acting on arrays of trapped neutral atoms to prepare entangling gates in N-qubit systems. The spatiotemporal control allows treating a denser array of atoms, where each pulse acts on a subset of the qubits, potentially allowing to speed up the gate operation by two orders of magnitude by boosting the dipole-blockade between the Rydberg states. Studying the rate of success of the algorithm under different constraints, we evaluate the impact of the proximity of the atoms and, indirectly, the role of the geometry of the arrays in three and four-qubit systems, as well as the minimal energy requirements and how this energy is used among the different qubits. Finally, we characterize and classify all optimal protocols according to the mechanism of the gate using a quantum pathway analysis.
We characterize the set of optimal protocols for two-qubit entangling gates through a mechanism analysis based on quantum pathways, which allows us to compare and rank the different solutions. As an example of a flexible platform with a rich landscape of protocols, we consider trapped neutral atoms excited to Rydberg states by different pulse sequences that extend over several atomic sites, optimizing both the temporal and the spatial features of the pulses. Studying the rate of success of the algorithm under different constraints, we analyze the impact of the proximity of the atoms on the nature and quality of the optimal protocols. We characterize in detail the features of the solutions in parameter space, showing some striking correlations among the set of parameters. Together with the mechanism analysis, the spatiotemporal control allows us to select protocols that operate under mechanisms by design, like finding needles in a haystack.
Arrays of identical neutral atoms trapped in optical tweezers are a promising candidate for use in quantum computing. These platforms are highly scalable to large numbers of qubits and neutral atoms boost several attractive features as long coherence times and the possibility to be entangled via strong dipole-dipole interactions by driving them to highly excited Rydberg states. \nThe Thesis work is developed inside the framework of the QRydDemo project, whose aim in the next few years is to realize a neutral atom quantum processor with several hundred qubits. The smallest building blocks for the quantum computer are one and two-qubit gates: to entangle two atoms in the quantum register, a controlled-phase (CZ) gate will be implemented by shining fine-tuned laser pulses onto them. In this work, after giving a theoretical description of the Hamiltonian of two neutral atoms in the quantum register, a numerical simulation of this system is exploited to reproduce the behavior of the two-qubit CZ gate. Realistic effects are taken into account as finite temperature, imperfect Rydberg blockade, or decay out of the Rydberg state. A protocol with constant pulses is analyzed and its optimal parameters are found through classical optimizers. Then, time-dependent pulses are introduced and the optimal pulses are found through the optimal control algorithm dCRAB in an open-loop optimization. For the experimental realization of the gate, this analysis is of pivotal importance to know in which aspect more effort has to be put to maximize the experimental precision of the operation and thus improving the performance of the whole device \n
Arrays of qubits encoded in the ground-state manifold of neutral atoms trapped in optical (or magnetic) lattices appear to be a promising platform for the realization of a scalable quantum computer. Two-qubit conditional gates between nearest-neighbor qubits in the array can be implemented by exploiting the Rydberg blockade mechanism, as was shown by D. Jaksch et al. [Phys. Rev. Lett. 85, 2208 (2000)]. However, the energy shift due to dipole-dipole interactions causing the blockade falls off rapidly with the interatomic distance, and protocols based on direct Rydberg blockade typically fail to operate between atoms separated by more than one lattice site. In this work, we propose an extension of the protocol of Jaksch et al. for controlled-ZZZ and controlled-not gates which works in the general case where the qubits are not nearest neighbors in the array. Our proposal relies on the Rydberg excitation hopping along a chain of ancilla noncoding atoms connecting the qubits on which the gate is to be applied. The dependence of the gate fidelity on the number of ancilla atoms, the blockade strength, and the decay rates of the Rydberg states is investigated. A comparison between our implementation of a distant controlled-not gate and one based on a sequence of nearest-neighbor two-qubit gates is also provided.
We present a novel protocol for implementing quantum gates between distant atomic qubits connected by an array of neutral atoms that play the role of a quantum bus. The protocol is based on adiabatically transferring the atoms in the array to an antiferromagnetic-like state of Rydberg excitations using chirped laser pulses. Upon exciting and deexciting the atoms in the array under the blockage of nearest neighbors, depending on the state of the two qubits, the system acquires a conditional geometric π -phase, while the dynamical phase cancels exactly, even when the atomic positions are disordered but nearly frozen in time, which requires sufficiently low temperatures. With experimentally relevant parameters, using smooth pulses minimizing the Rydberg-state decay and nonadiabatic errors, we obtain the gate times of 2– 3 µ s and gate fidelities of 0.99–0.98 for a pair of atoms separated by L = 20 – 30 µ m and connected by a quantum bus of several (three to six) atoms. Optimizing the pulses, we can obtain faster gates exhibiting even better fidelities than those with smooth adiabatic pulses.
Generating entanglement between two Rydberg atoms is at the core of neutral-atom quantum computers. Current two-qubit gates operate in the Rydberg-blockade regime, in which the full strength of the van der Waals interaction between the two Rydberg atoms is not directly exploited, to avoid sensitivity to the position noise of the tweezer-trapped atoms, at the cost of a longer time spent in the Rydberg state. Here, we propose a set of techniques based on coherent control of the atomic motion obtained by combining optical tweezers and a two-dimensional optical lattice, and a sequence of multiple on/off pulses. The protocols keep the two-qubit gate error contribution from position noise below 10−410^{-4}10−4, heat the atom by less than~Δn=0.01Δn = 0.01Δn=0.01, while being robust to alignment errors of the potential up to 505050~nm and thermal excitation up to nˉ=3\bar{n} = 3nˉ=3. This toolbox opens the path for new two-qubit Rydberg gates directly, or partially, driven by the interaction, in which the atoms spend only ∼10\sim 10∼10~ns in the Rydberg state, minimizing the increasingly dominant error source originating from its finite lifetime.