Continuously measured quantum systems are characterized by an output current, in the form of a stochastic and correlated time series, which conveys crucial information about the underlying quantum system. The many tools used to describe current fluctuations are scattered across different communities: quantum opticians often use stochastic master equations, while a prevalent approach in condensed-matter physics is provided by full counting statistics. These, however, are simply different sides of the same coin. Our goal with this tutorial is to provide a unified toolkit for describing current fluctuations. This not only provides novel insights, by bringing together different fields in physics, but also yields various analytical and numerical tools for computing quantities of interest. We illustrate our results with various pedagogical examples and connect them with topical fields of research, such as waiting-time statistics, quantum metrology, thermodynamic uncertainty relations, quantum point contacts, and Maxwell’s demons. Published by the American Physical Society 2024
Continuously measured quantum systems are characterized by an output current, in the form of a stochastic and correlated time series, which conveys crucial information about the underlying quantum system. The many tools used to describe current fluctuations are scattered across different communities: quantum opticians often use stochastic master equations, while a prevalent approach in condensed-matter physics is provided by full counting statistics. These, however, are simply different sides of the same coin. Our goal with this tutorial is to provide a unified toolkit for describing current fluctuations. This not only provides novel insights, by bringing together different fields in physics, but also yields various analytical and numerical tools for computing quantities of interest. We illustrate our results with various pedagogical examples and connect them with topical fields of research, such as waiting-time statistics, quantum metrology, thermodynamic uncertainty relations, quantum point contacts, and Maxwell’s demons. Published by the American Physical Society 2024
Abstract Processes at the nanoscale happen far away from the thermodynamic limit, far from equilibrium and are dominated by fluctuations and, perhaps, even quantum effects. This book establishes a consistent thermodynamic framework for such processes by combining tools from non-equilibrium statistical mechanics and the theory of open quantum systems. The book is accessible for graduate students and of interest to all researchers striving for a deeper understanding of the laws of thermodynamics beyond their traditional realm of applicability. It puts most emphasis on the microscopic derivation and understanding of key principles and concepts as well as their interrelation. The topics covered in this book include (quantum) stochastic processes, (quantum) master equations, local detailed balance, classical stochastic thermodynamics, (quantum) fluctuation theorems, strong coupling and non non-Markovian effects, thermodynamic uncertainty relations, operational approaches, Maxwell's demon and time-reversal symmetry, among other topics. Furthermore, the book treats a few applications in detail to illustrate the general theory and its potential for practical applications. These are single-molecule pulling experiments, quantum transport and thermoelectric effects in quantum dots, the micromaser and related set-ups in quantum optics.
We present a pedagogical treatment of the formalism of continuous quantum measurement. Our aim is to show the reader how the equations describing such measurements are derived and manipulated in a direct manner. We also give elementary background material for those new to measurement theory, and describe further various aspects of continuous measurements that should be helpful to those wanting to use such measurements in applications. Specifically, we use the simple and direct approach of generalized measurements to derive the stochastic master equation describing the continuous measurements of observables, give a tutorial on stochastic calculus, treat multiple observers and inefficient detection, examine a general form of the measurement master equation, and show how the master equation leads to information gain and disturbance. To conclude, we give a detailed treatment of imaging the resonance fluorescence from a single atom as a concrete example of how a continuous position measurement arises in a physical system.
Photon-resolved Floquet theory keeps track of the photon exchange of a quantum system with a coherent driving field. It thus complements the standard full-counting statistics that counts the number of photons exchanged with incoherent photon modes giving rise to dissipation. In this paper, we introduce a unifying framework describing both situations. We develop methods suitable for an analytical evaluation of low-order cumulants of photonic probability distributions. Within this framework we analyze the two-mode Jaynes-Cummings model to demonstrate that the photon-resolved Floquet theory and the standard full-counting statistics make consistent statistical predictions. Interestingly, we find that the photon-flux fluctuations diverge for vanishing dissipation, which can be related to an entanglement effect between the driven matter system and the driving field. To substantiate our results, we use our framework to describe efficient photon up-conversion in an ac-driven lambda system, that is characterized by a high signal-to-noise ratio. Because the framework is nonperturbative and predicts fluctuations, it paves the way toward nonperturbative spectroscopy, which will assist to improve metrological methods. Published by the American Physical Society 2024
The state of an open quantum system undergoing an adiabatic process evolves by following the instantaneous stationary state of its time-dependent generator. This observation allows one to characterize, for a generic adiabatic evolution, the average dynamics of the open system. However, information about fluctuations of dynamical observables, such as the number of photons emitted or the time-integrated stochastic entropy production in single experimental runs, requires controlling the whole spectrum of the generator and not only the stationary state. Here, we show how such information can be obtained in adiabatic open quantum dynamics by exploiting tools from large deviation theory. We prove an adiabatic theorem for deformed generators, which allows us to encode, in a biased quantum state, the full counting statistics of generic time-integrated dynamical observables. We further compute the probability associated with an arbitrary "rare" time history of the observable and derive a dynamics which realizes it in its typical behavior. Our results provide a way to characterize and engineer adiabatic open quantum dynamics and to control their fluctuations.
In the last chapter, we dealt with the wide class of physical operations that preserve the Gaussian character of the initial state, treating them as discrete transformations. Here, we describe what could loosely be considered the continuous-time version of such transformations. This chapter is intended to provide the reader with the tools to describe a wide range of notable quantum dynamics, with a very broad applicative scope. After a note on the action of linear and quadratic Hamiltonians, whose description follows directly from the theory of Gaussian states presented in Chapter 3 but was not explicitly clarified so far, we shall address systems linearly coupled to a reservoir of modes that are delta-correlated in time (a situation commonly referred to as ‘white noise’), and thus give rise to Markovian dynamics which we shall refer to as ‘diffusive’ for reasons that will be made clear in due time. Our story will commence with a derivation of the Gaussian dynamics resulting from such an environmental coupling, in the form of dynamical equations for the first and second statistical moments. Besides their interest per se , the latter will be instrumental in obtaining an unconventional derivation of the master equations that govern general, not necessarily Gaussian, quantum states under the same conditions. The corresponding quantum Langevin equations for the canonical operators in the Heisenberg picture will also be derived. Next, we will turn our attention to the study of the system's dynamics that result from the measurement of the environment. This is a topic with a longstanding tradition in quantum mechanics, grounded in the formalism of quantum stochastic calculus that emerged within the mathematical physics community as early as the seventies, and then re-introduced as the quantum trajectories approach in quantum optics almost twenty years later. The ‘weak’ POVMs resulting from observing a weakly coupled environment (as opposed to ‘strong’, projective measurements), carried out continuously in time (a prescription customarily subsumed by the term ‘monitoring’), leads to a stochastic dynamics for the system, where the randomness of the measurement outcomes is compactly and most elegantly represented by infinitesimal stochastic increments, giving rise to continuous but not differentiable quantum dynamics. Existing approaches to this subject tend to be quite impervious to the uninitiated. In the quantum optics literature, this is largely due to the technicalities involved in incorporating the discontinuous update of the quantum state prescribed by the von Neumann postulate. More mathematically oriented treatments have instead typically preferred an algebraic approach where the usual difficulty of describing measurements in the Heisenberg picture is compounded by the adoption of a rather abstract hierarchy of filters, in part inspired by classical control theory, to describe different possible updates of the quantum state. This state of affairs is further complicated by the added difficulties that come with the necessary introduction of some form of quantum stochastic calculus. Our approach to monitoring will therefore take a different route. Like in our derivation of diffusion and master equations, we shall keep restricting to linear couplings with a white noise environment, forfeiting full generality This situation is well modelled by the so called input-output formalism, whose physical origin will be discussed in detail in Chapter 9 , which approximates reliably, among other instances, the interaction between internal resonating modes and electromagnetic radiation leaking in and out of an optical cavity. First, we shall introduce stochastic Wiener increments and the Itô rule, which will arise naturally from the identification of the continuum field's modes subject to monitoring. We shall deliberately keep our arsenal of stochastic methods to these bare essentials, sacrificing to some extent both depth and generality, but still providing the reader with a powerful and seminal demonstration of the formalism. We shall then restrict to Gaussian general-dyne detections and apply the exact formalism developed in the previous chapter to the continuous filtering of the system's state conditioned by such measurements' outcomes. Next, as in our derivation of the unconditional master equations, we shall use the Gaussian dynamics as a key to unlock the full stochastic master equations governing general states. Hence, we will build on the quantum theory of filtering in the Gaussian regime to derive dynamical equations for linear feedback control and also apply our theoretical tools to the enhanced production of squeezing. Finally, we will turn to the closely related paradigm of coherent feedback, where environmental modes do not undergo measurements but are fed back to interact coherently with the system, see in detail how it modifies Gaussian diffusive dynamics and assess its potential for control by reconsidering the production of squeezing assisted by interferometric coherent feedback loops.
Rapid progress in the fabrication and manipulation of micro and nanoscale devices has made it necessary to extend the concepts of thermodynamics to small systems and finally to quantum systems. In such systems the extensive thermodynamic quantities, such as entropy, heat, and work, are not described by their average values alone but by distributions. \n \nRemarkably, it has been shown that the stochastic thermodynamic variables often obey fluctuation relations which usually appear in the form of relations between exponential averages. While the two-measurement protocol of thermodynamic variables, especially work, is now well studied in closed quantum systems, there have been conceptual and experimental problems in open quantum systems. \n \nIn this thesis, we theoretically study work statistics and fluctuation relations in open quantum systems. To calculate the work statistics, we use the quantum jump method and direct master equation calculations. We show that work definitions equivalent in closed systems can lead to mutually different results in the case of open quantum systems due to a different order of approximations. Moreover, we show that the fluctuation relations can be extended to nearly adiabatically driven systems by using the adiabatic renormalization procedure. \n \nLast, we focus on how a finite size of the environment affects the dynamics and work statistics of open quantum systems. This is important from the experimental point of view because a finite-size environment allows the detection of heat exchange between the system and the environment. We derive a master equation that takes into account these effects and develop a stochastic model that unravels the master equation. We explicitly show that the finite size of the environment influences the dynamics and the work statistics. We also show that the common fluctuation relations are still valid.