The ability to transmit quantum states over long distances is a fundamental requirement of the quantum internet and is reliant upon quantum repeaters. Quantum repeaters involve entangled photon sources that emit and deliver photonic entangled states at high rates and quantum memories that can temporarily store quantum states. Improvement of the entanglement distribution rate is essential for quantum repeaters, and multiplexing is expected to be a breakthrough. However, limited studies exist on multiplexed photon sources and their coupling with a multiplexed quantum memory. Here, we demonstrate the storing of a frequency-multiplexed two-photon source at telecommunication wavelengths in a quantum memory accepting visible wavelengths via wavelength conversion after 10-km distribution. To achieve this, quantum systems are connected via wavelength conversion with a frequency-stabilization system and a noise-reduction system. The developed system is stably operated for more than 42 h. Therefore, it can be applied to quantum repeater systems comprising various physical systems requiring long-term system stability.
The ability to transmit quantum states over long distances is a fundamental requirement of the quantum internet and is reliant upon quantum repeaters. Quantum repeaters involve entangled photon sources that emit and deliver photonic entangled states at high rates and quantum memories that can temporarily store quantum states. Improvement of the entanglement distribution rate is essential for quantum repeaters, and multiplexing is expected to be a breakthrough. However, limited studies exist on multiplexed photon sources and their coupling with a multiplexed quantum memory. Here, we demonstrate the storing of a frequency-multiplexed two-photon source at telecommunication wavelengths in a quantum memory accepting visible wavelengths via wavelength conversion after 10-km distribution. To achieve this, quantum systems are connected via wavelength conversion with a frequency-stabilization system and a noise-reduction system. The developed system is stably operated for more than 42 h. Therefore, it can be applied to quantum repeater systems comprising various physical systems requiring long-term system stability.
Abstract Quantum computing and quantum communication, have been greatly developed in recent years and expected to contribute to quantum internet technologies, including cloud quantum computing and unconditionally secure communication. However, long-distance quantum communication is challenging mainly because of optical fiber losses; quantum repeaters are indispensable for fiber-based transmission because unknown quantum states cannot be amplified with certainty. In this study, we demonstrate a versatile entanglement source in the telecom band for fiber-based quantum internet, which has a narrow linewidth of sub-MHz range, entanglement fidelity of more than 95%, and Bell-state generation even with frequency multimode. Furthermore, after a total distribution length of 20-km in fiber, two-photon correlation is observed with an easily identifiable normalized correlation coefficient, despite the limited bandwidth of the wavelength converter. The presented implementation promises an efficient method for entanglement distribution that is compatible with quantum memory and frequency-multiplexed long-distance quantum communication applications.
Abstract In long-distance quantum communication using quantum repeaters with quantum memories, entangled photons at telecommunication wavelengths that can be coupled to quantum memory with high efficiency are required. Typically, entangled photons are generated via spontaneous parametric down conversion (SPDC). However, the phase-matching bandwidth of SPDC is more than 100 GHz, which is much broader than the bandwidth of a Pr 3+ :Y 2 SiO 5 quantum memory (with overall bandwidth of ∼10 GHz while the bandwidth of each frequency channel is ∼10 MHz) suitable for frequency-multiplexed quantum repeaters. In this study, nondegenerate SPDC (1550 nm and 995 nm) inside an optical cavity is used to obtain a narrow linewidth and cluster width of SPDC to match the Pr 3+ :Y 2 SiO 5 bandwidth. We also developed a cavity control mechanism that can fulfill the doubly resonant condition. The developed two-photon source can maximize the coupling efficiency with Pr 3+ :Y 2 SiO 5 by introducing wavelength conversion and is promising for use in a quantum repeater.
Quantum repeaters are indispensable tools for long-distance quantum communication. However, frequency matching between entangled photon sources and remote quantum memories (QMs) is difficult, which is an obstacle to the implementation of quantum repeaters. In this paper, we demonstrate a method to achieve the coupling of a Pr:YSO as a fixed-time QM with a single telecommunication-wavelength photon through frequency stabilization using an optical frequency comb over all applied laser wavelengths. The demonstrated method can lead to the implementation of a quantum repeater scheme enabling an improvement of the entanglement generation rate, paving the way for long-distance quantum communication.
Photonic links between disparate quantum technologies−such as photon sources, memories, processors, clocks, and sensors−are key to scaling quantum networks and realizing a versatile quantum internet for secure quantum communication, distributed quantum computing, and entanglement-enhanced metrology. In practice, each technology is most suitably implemented on a different quantum platform; the substantial spectral mismatch between them, along with scarce native telecom interfaces, thus poses a major bottleneck to achieving efficient interconnections over long distances. Here we demonstrate the first deployed two-node hybrid network that operates entirely in the telecom C-band. Our approach uses no quantum frequency conversion or external filtering; instead, we develop a neutral atom single photon source and a solid-state rare-earth quantum memory that both operate in previously unexplored telecom regimes with state-of-the-art performance. The source achieves a high single-photon purity at 46 kcps, and the memory a storage efficiency of 10.6% with high multimode capacity. We leverage the intrinsic tunability of both systems to optimize their spectral overlap and demonstrate microsecond-level storage and retrieval with a large time-bandwidth product. Moreover, we showcase real-world networking competencies such as support for multiplexing across 37 temporal modes and preservation of non-classicality over fibers of 10.6 km (metropolitan) and 49.2 km (laboratory). Our work establishes a backbone for telecom-native quantum repeater links and unlocks a path towards high-bandwidth, large-scale quantum networking.
Realization of long-distance quantum communication through the quantum repeater network requires a combination of some key elements, including a multiplexed quantum memory for storage of entanglement and a telecom photon for propagation of information through the fiber.Although impressive experimental advances have demonstrated the individual elements, combining these key capabilities together and realizing them in a single experimental system remains a significant challenge.Here, we report an experimental realization of long-distance entanglement between a multiplexed quantum memory with 49 individually accessible memory cells and a telecom photon after transmission in a 10-km optical fiber.Excitation of an atomic ensemble generates narrow-band polarization entanglement between a telecom photon of 1530-nm wavelength and another photon of 780-nm wavelength, which is then stored into a memory cell of a multiplexed atomic quantum memory and read out after a controllable delay.The entanglement is verified through quantum-state tomography after quantum storage in the atomic memory and fiber transmission of the telecom photon.This experiment demonstrates an important step towards realization of long-distance quantum communication networks.
"Quantum communication is the art of transferring a quantum state from one place to another". The capability of distributing quantum states allows, for instance, provably secure communication and, in the near future, will enable the interconnection of quantum computers to establish a quantum internet. A convenient way to send quantum states from one place to another is to encode them into photons and distribute them using optical bres. The distance over which this can be achieved is still limited to a few hundred of kilometers. However, it can be extended in principle to arbitrary long distances by means of quantum repeaters. The realization of such quantum repeaters will require the engineering and interfacing of heterogeneous elements such as entangled photon-pair sources, quantum memories and entanglement swapping operations. The main goal of this thesis is to develop and study the compatibility of the main elements required to build a frequency multiplexed quantum repeater. This architecture requires a frequency multimode entangled photon pair source which, for example, could be implemented exploiting the process that involves the interaction of a strong light pulse with a non-linear crystal. Such a process is versatile and allows easy tailoring of the photon-pair spectral properties in order to match the requirements of the frequency multiplexed quantum repeater architecture. First, as a precursor of such a photon pair source, we developed a novel heralded single photon source that involves spectrally resolved single photon detection and on-demand frequency shifting. These capabilities are also essential tools in a frequency multiplexed quantum repeater. Next, we demonstrated the compatibility of such a sources with frequency multimode photonic quantum memories by performing spectrally multiplexed storage of single photons. We also tested the capability of high- delity storage of photons encoding quantum information in their polarization degree of freedom. Finally, we showed that entanglement swapping operations, i.e. Bell-state measurements, can be performed using photon pair sources compatible with quantum memories, quantum repeater architectures, and real-world scenarios. While a lot of e ort remains to be done, in the work presented in this thesis we demonstrated that all the key elements required to build a frequency multiplexed quantum repeater can be built and eventually be interfaced. The main obstacles towards that goal and possible ways to overcome them are also discussed.