Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2302.07639 · Applied Physics Letters

Compact strontium atom source using fiber-based pulsed laser ablation

Alto Osada, Ryo Tamaki, Wenbo Lin, Ippei Nakamura, Atsushi Noguchi

Published May 1, 2023• 1 citation
arXivHTMLPDF

Abstract

We designed, demonstrated, and characterized a strontium atom source based on fiber-based pulsed laser ablation. By using a commercially available miniature lens system for focusing nanosecond pulsed laser of up to 225 μ J delivered through a multimode fiber of 105 μm core, we ablate a SrTiO3 target and generate a jet of neutral strontium atoms, though our method can be applied to other transparent ablation targets containing materials under concern. Our device endures 6000 cycles of pulse delivery and irradiation without noticeable damage on the fiber facets and lenses. The generated strontium beam is characterized with a spectroscopic method and is revealed to exhibit the transverse temperature of 800 K and a longitudinal velocity of 2300 m/s, which are typical for a pulsed-laser-ablation-based atom source. The number of atoms generated by a single ablation pulse is estimated to be 2×105. Our device provides a compact, cryo-compatible fiber-pigtailed atom source with minimized device footprints and reduced complexity of vacuum systems to further promote development of cold-atom experiments. It may also find interesting applications in atomic and molecular sciences.

DOI
10.1063/5.0146658

Related papers

Thermal emission of strontium in a cryogenic buffer-gas beam source

Andrew Winnicki, Zack Lasner, John M. Doyle

We demonstrate the production of cold atomic strontium (Sr) and strontium-containing molecules (SrOH) in a cryogenic buffer-gas beam source via direct heating of strontium oxide (SrO) with 30 mJ laser pulses several milliseconds long. Here, $3.7(2)\ifmmode\times\else\texttimes\fi{}{10}^{14}$ Sr atoms are released, which represents a factor of 7 increase in atomic production per pulse compared to nanosecond-scale ablation laser pulses. A peak atomic density of $1.93(6)\ifmmode\times\else\texttimes\fi{}{10}^{12}$ atoms/${\mathrm{cm}}^{3}$ is achieved, which corresponds to a factor of 2 increase relative to ablation. We further propose extensions of this method to other atomic and molecular species.

arXiv:2407.09907•Physical Review A•Nov 12, 2024•1 citation

A new design of a compact strontium cold-atom source

Dongyang Xu

A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.

•Jan 1, 2020•0 citations

Jet-loaded cold atomic beam source for strontium

Minho Kwon, Aaron Holman, Quan Gan +4 more

We report on the design and characterization of a cold atom source for strontium (Sr) based on a two-dimensional magneto-optical trap (MOT) that is directly loaded from the atom jet of a dispenser. We characterize the atom flux of the source by measuring the loading rate of a three-dimensional MOT. We find loading rates of up to 108 atoms per second. The setup is compact, easy to construct, and has low power consumption. It addresses the longstanding challenge of reducing the complexity of cold beam sources for Sr, which is relevant for optical atomic clocks, quantum simulation, and computing devices based on ultracold Sr.

arXiv:2210.14186•Review of Scientific Instruments•Jan 1, 2023•13 citations

A supersonic laser ablation beam source with narrow velocity spreads

Parul Aggarwal, Hendrick L. Bethlem, A. Boeschoten +14 more

A supersonic beam source for SrF and BaF molecules is constructed by combining the expansion of carrier gas (a mixture of 2% SF6 and 98% argon) from an Even–Lavie valve with laser ablation of a barium/strontium metal target at a repetition rate of 10 Hz. Molecular beams with a narrow translational velocity spread are produced at relative values of Δv/v = 0.053(11) and 0.054(9) for SrF and BaF, respectively. The relative velocity spread of the beams produced in our source is lower in comparison with the results from other metal fluoride beams produced in supersonic laser ablation sources. The rotational temperature of BaF is measured to be 3.5 K. The source produces 6 × 108 and 107 molecules per steradian per pulse in the X2Σ+ (ν = 0, N = 1) state of BaF and SrF molecules, respectively, a state amenable to Stark deceleration and laser cooling.

Review of Scientific Instruments•Mar 1, 2021•21 citations

An integrated high-flux cold atomic beam source for strontium

Jie Li, Zhi-Peng Jia, Peng Liu +8 more

We present the design, construction, and characterization of an integrated cold atomic beam source for strontium (Sr), which is based on a compact Zeeman slower for slowing the thermal atomic beam and an atomic deflector for selecting the cold flux. By adopting arrays of permanent magnets to produce the magnetic fields of the slower and the deflector, we effectively reduce the system size and power compared to traditional systems with magnetic coils. After the slower cooling, one can employ additional transverse cooling in the radial direction and improve the atom collimation. The atomic deflectors employ two stages of two-dimensional magnetic-optical trapping (MOT) to deflect the cold flux, whose atomic speed is lower than 50 m/s, by 20° from the thermal atomic beam. We characterize the cold atomic beam flux of the source by measuring the loading rate of a three-dimensional MOT. The loading rates reach up to 109 atoms/s. The setup is compact, highly tunable, lightweight, and requires low electrical power, which addresses the challenge of reducing the complexity of building optical atomic clocks and quantum simulation devices based on Sr.

Review of Scientific Instruments•Sep 1, 2023•9 citations

A high-flux source of cold strontium with a loading rate of 4×1010 atoms/s for open release

Thomas Walker, A. L. Marchant, Elliot Bentine +17 more

We present a high-flux source of cold strontium atoms based on a two-dimensional magneto-optical trap (2D MOT) and a Zeeman slower. We use the source to load a 3D MOT in a separate science chamber, observing a loading rate of 4×1010 atoms/s—to our knowledge, the highest reported loading flux for strontium. To characterize the vacuum pressure in the science chamber, we load the atoms into a magnetic trap and measure a lifetime of between 8 and 24 s, depending on the oven temperature. Finally, we characterize the atom flux and velocity distributions from the oven and from the 2D MOT source, finding reasonable agreement with models in the free molecular flow regime. Our results show that it is possible to readily produce a cold strontium flux at comparable levels to those of alkali species, at oven temperatures compatible with long-term operation, and at vacuum pressures suitable for state-of-the-art quantum experiments. We make our design available at no cost to benefit researchers in the quantum community.

arXiv:2603.25312•AVS Quantum Science•Jul 10, 2026•0 citations
We designed, demonstrated, and characterized a strontium atom source based on fiber-based pulsed laser ablation. By using a commercially available miniature lens system for focusing nanosecond pulsed laser of up to 225 μ J delivered through a multimode fiber of 105 μm core, we ablate a SrTiO3 target and generate a jet of neutral strontium atoms, though our method can be applied to other transparent ablation targets containing materials under concern. Our device endures 6000 cycles of pulse delivery and irradiation without noticeable damage on the fiber facets and lenses. The generated strontium beam is characterized with a spectroscopic method and is revealed to exhibit the transverse temperature of 800 K and a longitudinal velocity of 2300 m/s, which are typical for a pulsed-laser-ablation-based atom source. The number of atoms generated by a single ablation pulse is estimated to be 2×105. Our device provides a compact, cryo-compatible fiber-pigtailed atom source with minimized device footprints and reduced complexity of vacuum systems to further promote development of cold-atom experiments. It may also find interesting applications in atomic and molecular sciences.
We demonstrate the production of cold atomic strontium (Sr) and strontium-containing molecules (SrOH) in a cryogenic buffer-gas beam source via direct heating of strontium oxide (SrO) with 30 mJ laser pulses several milliseconds long. Here, $3.7(2)\ifmmode\times\else\texttimes\fi{}{10}^{14}$ Sr atoms are released, which represents a factor of 7 increase in atomic production per pulse compared to nanosecond-scale ablation laser pulses. A peak atomic density of $1.93(6)\ifmmode\times\else\texttimes\fi{}{10}^{12}$ atoms/cm3{\mathrm{cm}}^{3}cm3 is achieved, which corresponds to a factor of 2 increase relative to ablation. We further propose extensions of this method to other atomic and molecular species.
A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.
We report on the design and characterization of a cold atom source for strontium (Sr) based on a two-dimensional magneto-optical trap (MOT) that is directly loaded from the atom jet of a dispenser. We characterize the atom flux of the source by measuring the loading rate of a three-dimensional MOT. We find loading rates of up to 108 atoms per second. The setup is compact, easy to construct, and has low power consumption. It addresses the longstanding challenge of reducing the complexity of cold beam sources for Sr, which is relevant for optical atomic clocks, quantum simulation, and computing devices based on ultracold Sr.
A supersonic beam source for SrF and BaF molecules is constructed by combining the expansion of carrier gas (a mixture of 2% SF6 and 98% argon) from an Even–Lavie valve with laser ablation of a barium/strontium metal target at a repetition rate of 10 Hz. Molecular beams with a narrow translational velocity spread are produced at relative values of Δv/v = 0.053(11) and 0.054(9) for SrF and BaF, respectively. The relative velocity spread of the beams produced in our source is lower in comparison with the results from other metal fluoride beams produced in supersonic laser ablation sources. The rotational temperature of BaF is measured to be 3.5 K. The source produces 6 × 108 and 107 molecules per steradian per pulse in the X2Σ+ (ν = 0, N = 1) state of BaF and SrF molecules, respectively, a state amenable to Stark deceleration and laser cooling.
We present the design, construction, and characterization of an integrated cold atomic beam source for strontium (Sr), which is based on a compact Zeeman slower for slowing the thermal atomic beam and an atomic deflector for selecting the cold flux. By adopting arrays of permanent magnets to produce the magnetic fields of the slower and the deflector, we effectively reduce the system size and power compared to traditional systems with magnetic coils. After the slower cooling, one can employ additional transverse cooling in the radial direction and improve the atom collimation. The atomic deflectors employ two stages of two-dimensional magnetic-optical trapping (MOT) to deflect the cold flux, whose atomic speed is lower than 50 m/s, by 20° from the thermal atomic beam. We characterize the cold atomic beam flux of the source by measuring the loading rate of a three-dimensional MOT. The loading rates reach up to 109 atoms/s. The setup is compact, highly tunable, lightweight, and requires low electrical power, which addresses the challenge of reducing the complexity of building optical atomic clocks and quantum simulation devices based on Sr.
We present a high-flux source of cold strontium atoms based on a two-dimensional magneto-optical trap (2D MOT) and a Zeeman slower. We use the source to load a 3D MOT in a separate science chamber, observing a loading rate of 4×1010 atoms/s—to our knowledge, the highest reported loading flux for strontium. To characterize the vacuum pressure in the science chamber, we load the atoms into a magnetic trap and measure a lifetime of between 8 and 24 s, depending on the oven temperature. Finally, we characterize the atom flux and velocity distributions from the oven and from the 2D MOT source, finding reasonable agreement with models in the free molecular flow regime. Our results show that it is possible to readily produce a cold strontium flux at comparable levels to those of alkali species, at oven temperatures compatible with long-term operation, and at vacuum pressures suitable for state-of-the-art quantum experiments. We make our design available at no cost to benefit researchers in the quantum community.