Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2301.13432 · Photonics Research

Manipulation of polarization topology using a Fabry–Pérot fiber cavity with a higher-order mode optical nanofiber

Maki Maeda, Jameesh Keloth, Síle Nic Chormaic

Published Apr 7, 2023• 4 citations
arXivHTMLPDF

Abstract

Optical nanofiber cavity research has mainly focused on the fundamental mode. Here, a Fabry–Pérot fiber cavity with an optical nanofiber supporting the higher-order modes ( TE 01 , TM 01 , HE 21 o , and HE 21 e ) is demonstrated. Using cavity spectroscopy, with mode imaging and analysis, we observed cavity resonances that exhibited complex, inhomogeneous states of polarization with topological features containing Stokes singularities such as C-points, Poincaré vortices, and L-lines. In situ tuning of the intracavity birefringence enabled the desired profile and polarization of the cavity mode to be obtained. We believe these findings open new research possibilities for cold atom manipulation and multimode cavity quantum electrodynamics using the evanescent fields of higher-order mode optical nanofibers.

DOI
10.1364/prj.486373

Related papers

共振器量子電気力学のための光ナノファイバーベース共振器の開発

前田 真貴, Maki Maeda

Optical nanofibers (ONFs) pave the way for researchers to understand and control light-matter interactions at the nanoscale. Evanescent light fields at the waist of ONFs can be coupled to quantum emitters for various studies. In particular, significant experimental progress on quantum emitter coupling with an ONF-based cavity mode, for cavity quantum electrodynamics (cQED), has been achieved in the last two decades. This thesis showcases the following topics: (i) the development of novel ONF cavity fabrication methods using a focused ion beam (FIB) which provides highly reflective cavity mirrors with more stable fabrication quality than conventional fabrication methods, (ii) the optical characterization of ONF cavities fabricated using the FIB technique, (iii) the investigation of the effects of laser annealing on the cavity modes, and (iv) the realization and characterization of an ONF-based cavity supporting higher-order modes (HOMs) and controlled excitation of the desired HOMs with polarization topology. This is a significant step toward degenerate multimode cQED and potential access to evanescent field singular optics using a HOM-ONF. This PhD work advances ONF-based cavity systems, not only for cQED studies but also contributes to their fundamental understanding in quantum optics, structured light, and beyond.

•Mar 31, 2024•0 citations

Manipulation of structured light in an atom-clad optical nanofiber (Conference Presentation)

Thomas Nieddu, Tridib Ray, Simon Peter Mekhail +2 more

Optical nanofibers (ONF) have been proved useful tools to probe cold atomic systems. Due to the intense evanescent field at their waist, ONFs have been used to probe or even trap atoms. However, very little experimental work has been done on exploiting the higher order modes (HOM) of such devices. The HOMs feature inhomogeneous polarization distributions around the ONF’s waist and can lead to the guiding of light carrying orbital angular momentum (OAM), via selective excitation of modes. In this work, we have experimentally studied the interaction between an ensemble of cold rubidium atoms and the HOMs of an ONF. The ONF, tailored to allow propagation of the first 6 guided modes at 780 nm, is embedded in a cold atomic ensemble and its modes are selectively excited by coupling vector beams from free-space. Using modal decomposition at the output of the ONF, we can calculate the transfer matrix of the system. This information, when combined with the amplitude extinction resulting from the scattering of the guided light by atoms surrounding the waist, allows us to non-destructively infer the modal excitation at the waist of the ONF. We further investigate the effect of temperature-induced strain on the modal decomposition at the waist and fiber output pigtail. Our results allow us to encode more than one quantum of information on the total angular momentum of a single guided photon. The inhomogeneous polarization distributions featured by the HOMs also offer a new tool to study chiral quantum systems.

Complex Light and Optical Forces•Mar 8, 2019•0 citations

Nanofiber Fabry–Perot microresonator for nonlinear optics and cavity quantum electrodynamics

C. Wuttke, Martin Becker, Sven Brückner +2 more

We experimentally realize a Fabry-Perot-type optical microresonator near the cesium D2 line wavelength based on a tapered optical fiber, equipped with two fiber Bragg gratings that enclose a subwavelength diameter waist. Owing to the very low taper losses, the finesse of the resonator reaches F=86 while the on-resonance transmission is T=11%. The characteristics of our resonator fulfill the requirements of nonlinear optics and cavity quantum electrodynamics in the strong coupling regime. These characteristics, combined with the demonstrated ease of use and advantageous mode geometry, open a realm of applications.

arXiv:1202.1730•Optics Letters•May 25, 2012•64 citations

High-finesse fiber Fabry–Perot cavities: stabilization and mode matching analysis

J. Gallego, S. Ghosh, Seyed Khalil Alavi +4 more

Fiber Fabry–Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications, where they typically require precise stabilization of their optical resonances. Here, we study two different approaches to construct fiber Fabry–Perot resonators and stabilize their length for experiments in cavity quantum electrodynamics with neutral atoms. A piezo-mechanically actuated cavity with feedback based on the Pound–Drever–Hall locking technique is compared to a novel rigid cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. Furthermore, we present a general analysis of the mode matching problem in fiber Fabry–Perot cavities, which explains the asymmetry in their reflective line shapes and has important implications for the optimal alignment of the fiber resonators. Finally, we discuss the issue of fiber-generated background photons. We expect that our results contribute toward the integration of high-finesse fiber Fabry–Perot cavities into compact and robust quantum-enabled devices in the future.

arXiv:1508.05289•Applied Physics B•Mar 1, 2016•79 citations

Optical Nanofibers for Manipulating Atoms and Photons

Nayak Kaliprasanna

This thesis presents the development of novel methods for manipulating atomsand photons using an optical nanofiber. Optical nanofibers are vacuum-clad silicafibers with subwavelength-diameter. These optical nanofibers can support only thefundamental mode propagation through the guided mode. The field in the guidedmode is strongly confined in space and a part of the field lies outside the fiber, inthe evanescent region. Such unique property of the field around the optical nanofibermakes it a promising candidate for various quantum optics experiments.Due to the confinement of the field in the guided modes, the spontaneous emissionof atoms can be strongly modified around an optical nanofiber. In this thesis itis experimentally demonstrated that a significant fraction of atomic emission can bechanneled into the guided modes of the nanofiber. Optical nanofibers are realized usingadiabatically tapered single mode optical fibers. Experiments are performed byoverlapping cold Cs-atoms, from a magneto-optical trap (MOT), with the nanofiberand observing fluorescence photons through the guided modes of the nanofiber. Thenanofiber suppresses any scattering light into the guided modes and high coupling efficiencyof fluorescence photons to the guided modes enables us to measure fluorescenceof a very small number of atoms present in the evanescent region of the nanofiber. Sucha technique is further implemented for measuring the density profile and the temperatureof the cold atom cloud.The fluorescence excitation spectrum of cold atoms around an optical nanofiberis investigated by detecting the fluorescence photons through the guided modes. Due tothe inherent nature of the nanofiber method the observed spectrum strongly reflects theeffect of van der Waals (vdW) interaction between atom and nanofiber surface whichwould be dominant for distances closer than /2 from the surface. The observationsare understood through a process where atoms around the nanofiber fall into the vdWpotential forming atom-surface bound states. The observed spectral profiles are wellreproduced from theory considering free-to-bound (photo-association) and bound-toboundtransitions. Furthermore it is demonstrated that the surface conditions can bemodified by irradiating the MOT atoms around the nanofiber using a violet laser radiation.The surface conditions are modified in such a way that the atoms are kept fromfalling into the vdW potential and behave as almost free atoms around the nanofiber.Under such free-atom conditions the photon correlation measurements are performed.The observed antibunching of fluorescence photons demonstrates that singleatoms can be probed efficiently by detecting the fluorescence through the guidedmodes of the nanofiber.The photon correlations are further investigated by varying atom number aroundthe nanofiber. Due to the single spatial mode nature of the nanofiber guided modes, thephoton correlations evolve as interplay between both the first- and second-order coherenceswith increasing atom number. It is shown that both bunching and antibunchingtypes of first-order coherences can contribute to the correlations. However, it is alsoshown that the type of the first-order coherence and its contribution to the correlationscan be strongly affected by the observation and excitation geometries.This work may open up new perspectives for implementing optical nanofibersfor exploring atom-surface interactions, single-atom detection, single photon generationand further applications in the fields of quantum optics and quantum informationtechnologies.

•Jan 1, 2009•0 citations

Thermal excitations of optical nanofibers measured with a fiber-integrated Fabry-Pérot cavity

Christian Wuttke

Efficient coupling of light to quantum emitters, such as atoms, molecules or quantum dots, is one of the great challenges in current research. The interaction can be strongly enhanced by coupling the emitter to the eva-nescent field of subwavelength dielectric waveguides that offer strong lateral confinement of the guided light. In this context subwavelength diameter optical nanofibers as part of a tapered optical fiber (TOF) have proven to be powerful tool which also provide an efficient transfer of the light from the interaction region to an optical bus, that is to say, from the nanofiber to an optical fiber. rnAnother approach towards enhancing light–matter interaction is to employ an optical resonator in which the light is circulating and thus passes the emitters many times. Here, both approaches are combined by experi-mentally realizing a microresonator with an integrated nanofiber waist. This is achieved by building a fiber-integrated Fabry-Perot type resonator from two fiber Bragg grating mirrors with a stop-band near the cesium D2-line wavelength. The characteristics of this resonator fulfill the requirements of nonlinear optics, optical sensing, and cavity quantum electrodynamics in the strong-coupling regime. Together with its advantageous features, such as a constant high coupling strength over a large volume, tunability, high transmission outside the mirror stop band, and a monolithic design, this resonator is a promising tool for experiments with nanofiber-coupled atomic ensembles in the strong-coupling regime. rnThe resonator's high sensitivity to the optical properties of the nanofiber provides a probe for changes of phys-ical parameters that affect the guided optical mode, e.g., the temperature via the thermo-optic effect of silica. Utilizing this detection scheme, the thermalization dynamics due to far-field heat radiation of a nanofiber is studied over a large temperature range. This investigation provides, for the first time, a measurement of the total radiated power of an object with a diameter smaller than all absorption lengths in the thermal spectrum at the level of a single object of deterministic shape and material. The results show excellent agreement with an ab initio thermodynamic model that considers heat radiation as a volumetric effect and that takes the emitter shape and size relative to the emission wavelength into account. Modeling and investigating the thermalization of microscopic objects with arbitrary shape from first principles is of fundamental interest and has important applications, such as heat management in nano-devices or radiative forcing of aerosols in Earth's climate system. rnUsing a similar method, the effect of the TOF's mechanical modes on the polarization and phase of the fiber-guided light is studied. The measurement results show that in typical TOFs these quantities exhibit high-frequency thermal fluctuations. They originate from high-Q torsional oscillations that couple to the nanofiber-guided light via the strain-optic effect. An ab-initio opto-mechanical model…

•Jan 1, 2014•1 citation
Optical nanofiber cavity research has mainly focused on the fundamental mode. Here, a Fabry–Pérot fiber cavity with an optical nanofiber supporting the higher-order modes ( TE 01 , TM 01 , HE 21 o , and HE 21 e ) is demonstrated. Using cavity spectroscopy, with mode imaging and analysis, we observed cavity resonances that exhibited complex, inhomogeneous states of polarization with topological features containing Stokes singularities such as C-points, Poincaré vortices, and L-lines. In situ tuning of the intracavity birefringence enabled the desired profile and polarization of the cavity mode to be obtained. We believe these findings open new research possibilities for cold atom manipulation and multimode cavity quantum electrodynamics using the evanescent fields of higher-order mode optical nanofibers.
Optical nanofibers (ONFs) pave the way for researchers to understand and control light-matter interactions at the nanoscale. Evanescent light fields at the waist of ONFs can be coupled to quantum emitters for various studies. In particular, significant experimental progress on quantum emitter coupling with an ONF-based cavity mode, for cavity quantum electrodynamics (cQED), has been achieved in the last two decades. This thesis showcases the following topics: (i) the development of novel ONF cavity fabrication methods using a focused ion beam (FIB) which provides highly reflective cavity mirrors with more stable fabrication quality than conventional fabrication methods, (ii) the optical characterization of ONF cavities fabricated using the FIB technique, (iii) the investigation of the effects of laser annealing on the cavity modes, and (iv) the realization and characterization of an ONF-based cavity supporting higher-order modes (HOMs) and controlled excitation of the desired HOMs with polarization topology. This is a significant step toward degenerate multimode cQED and potential access to evanescent field singular optics using a HOM-ONF. This PhD work advances ONF-based cavity systems, not only for cQED studies but also contributes to their fundamental understanding in quantum optics, structured light, and beyond.
Optical nanofibers (ONF) have been proved useful tools to probe cold atomic systems. Due to the intense evanescent field at their waist, ONFs have been used to probe or even trap atoms. However, very little experimental work has been done on exploiting the higher order modes (HOM) of such devices. The HOMs feature inhomogeneous polarization distributions around the ONF’s waist and can lead to the guiding of light carrying orbital angular momentum (OAM), via selective excitation of modes. In this work, we have experimentally studied the interaction between an ensemble of cold rubidium atoms and the HOMs of an ONF. The ONF, tailored to allow propagation of the first 6 guided modes at 780 nm, is embedded in a cold atomic ensemble and its modes are selectively excited by coupling vector beams from free-space. Using modal decomposition at the output of the ONF, we can calculate the transfer matrix of the system. This information, when combined with the amplitude extinction resulting from the scattering of the guided light by atoms surrounding the waist, allows us to non-destructively infer the modal excitation at the waist of the ONF. We further investigate the effect of temperature-induced strain on the modal decomposition at the waist and fiber output pigtail. Our results allow us to encode more than one quantum of information on the total angular momentum of a single guided photon. The inhomogeneous polarization distributions featured by the HOMs also offer a new tool to study chiral quantum systems.
We experimentally realize a Fabry-Perot-type optical microresonator near the cesium D2 line wavelength based on a tapered optical fiber, equipped with two fiber Bragg gratings that enclose a subwavelength diameter waist. Owing to the very low taper losses, the finesse of the resonator reaches F=86 while the on-resonance transmission is T=11%. The characteristics of our resonator fulfill the requirements of nonlinear optics and cavity quantum electrodynamics in the strong coupling regime. These characteristics, combined with the demonstrated ease of use and advantageous mode geometry, open a realm of applications.
Fiber Fabry–Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications, where they typically require precise stabilization of their optical resonances. Here, we study two different approaches to construct fiber Fabry–Perot resonators and stabilize their length for experiments in cavity quantum electrodynamics with neutral atoms. A piezo-mechanically actuated cavity with feedback based on the Pound–Drever–Hall locking technique is compared to a novel rigid cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. Furthermore, we present a general analysis of the mode matching problem in fiber Fabry–Perot cavities, which explains the asymmetry in their reflective line shapes and has important implications for the optimal alignment of the fiber resonators. Finally, we discuss the issue of fiber-generated background photons. We expect that our results contribute toward the integration of high-finesse fiber Fabry–Perot cavities into compact and robust quantum-enabled devices in the future.
This thesis presents the development of novel methods for manipulating atomsand photons using an optical nanofiber. Optical nanofibers are vacuum-clad silicafibers with subwavelength-diameter. These optical nanofibers can support only thefundamental mode propagation through the guided mode. The field in the guidedmode is strongly confined in space and a part of the field lies outside the fiber, inthe evanescent region. Such unique property of the field around the optical nanofibermakes it a promising candidate for various quantum optics experiments.Due to the confinement of the field in the guided modes, the spontaneous emissionof atoms can be strongly modified around an optical nanofiber. In this thesis itis experimentally demonstrated that a significant fraction of atomic emission can bechanneled into the guided modes of the nanofiber. Optical nanofibers are realized usingadiabatically tapered single mode optical fibers. Experiments are performed byoverlapping cold Cs-atoms, from a magneto-optical trap (MOT), with the nanofiberand observing fluorescence photons through the guided modes of the nanofiber. Thenanofiber suppresses any scattering light into the guided modes and high coupling efficiencyof fluorescence photons to the guided modes enables us to measure fluorescenceof a very small number of atoms present in the evanescent region of the nanofiber. Sucha technique is further implemented for measuring the density profile and the temperatureof the cold atom cloud.The fluorescence excitation spectrum of cold atoms around an optical nanofiberis investigated by detecting the fluorescence photons through the guided modes. Due tothe inherent nature of the nanofiber method the observed spectrum strongly reflects theeffect of van der Waals (vdW) interaction between atom and nanofiber surface whichwould be dominant for distances closer than /2 from the surface. The observationsare understood through a process where atoms around the nanofiber fall into the vdWpotential forming atom-surface bound states. The observed spectral profiles are wellreproduced from theory considering free-to-bound (photo-association) and bound-toboundtransitions. Furthermore it is demonstrated that the surface conditions can bemodified by irradiating the MOT atoms around the nanofiber using a violet laser radiation.The surface conditions are modified in such a way that the atoms are kept fromfalling into the vdW potential and behave as almost free atoms around the nanofiber.Under such free-atom conditions the photon correlation measurements are performed.The observed antibunching of fluorescence photons demonstrates that singleatoms can be probed efficiently by detecting the fluorescence through the guidedmodes of the nanofiber.The photon correlations are further investigated by varying atom number aroundthe nanofiber. Due to the single spatial mode nature of the nanofiber guided modes, thephoton correlations evolve as interplay between both the first- and second-order coherenceswith increasing atom number. It is shown that both bunching and antibunchingtypes of first-order coherences can contribute to the correlations. However, it is alsoshown that the type of the first-order coherence and its contribution to the correlationscan be strongly affected by the observation and excitation geometries.This work may open up new perspectives for implementing optical nanofibersfor exploring atom-surface interactions, single-atom detection, single photon generationand further applications in the fields of quantum optics and quantum informationtechnologies.
Efficient coupling of light to quantum emitters, such as atoms, molecules or quantum dots, is one of the great challenges in current research. The interaction can be strongly enhanced by coupling the emitter to the eva-nescent field of subwavelength dielectric waveguides that offer strong lateral confinement of the guided light. In this context subwavelength diameter optical nanofibers as part of a tapered optical fiber (TOF) have proven to be powerful tool which also provide an efficient transfer of the light from the interaction region to an optical bus, that is to say, from the nanofiber to an optical fiber. rnAnother approach towards enhancing light–matter interaction is to employ an optical resonator in which the light is circulating and thus passes the emitters many times. Here, both approaches are combined by experi-mentally realizing a microresonator with an integrated nanofiber waist. This is achieved by building a fiber-integrated Fabry-Perot type resonator from two fiber Bragg grating mirrors with a stop-band near the cesium D2-line wavelength. The characteristics of this resonator fulfill the requirements of nonlinear optics, optical sensing, and cavity quantum electrodynamics in the strong-coupling regime. Together with its advantageous features, such as a constant high coupling strength over a large volume, tunability, high transmission outside the mirror stop band, and a monolithic design, this resonator is a promising tool for experiments with nanofiber-coupled atomic ensembles in the strong-coupling regime. rnThe resonator's high sensitivity to the optical properties of the nanofiber provides a probe for changes of phys-ical parameters that affect the guided optical mode, e.g., the temperature via the thermo-optic effect of silica. Utilizing this detection scheme, the thermalization dynamics due to far-field heat radiation of a nanofiber is studied over a large temperature range. This investigation provides, for the first time, a measurement of the total radiated power of an object with a diameter smaller than all absorption lengths in the thermal spectrum at the level of a single object of deterministic shape and material. The results show excellent agreement with an ab initio thermodynamic model that considers heat radiation as a volumetric effect and that takes the emitter shape and size relative to the emission wavelength into account. Modeling and investigating the thermalization of microscopic objects with arbitrary shape from first principles is of fundamental interest and has important applications, such as heat management in nano-devices or radiative forcing of aerosols in Earth's climate system. rnUsing a similar method, the effect of the TOF's mechanical modes on the polarization and phase of the fiber-guided light is studied. The measurement results show that in typical TOFs these quantities exhibit high-frequency thermal fluctuations. They originate from high-Q torsional oscillations that couple to the nanofiber-guided light via the strain-optic effect. An ab-initio opto-mechanical model…