Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2301.06060 · IEEE International Conference on Acoustics Speech and Signal Processing

CRC-Aided Learned Ensembles of Belief-Propagation Polar Decoders

Tomer Raviv, Alon Goldman, Ofek Vayner, Yair Be'ery, Nir Shlezinger

Published Mar 18, 2024• 9 citations
arXivHTMLPDF

Abstract

Polar codes have promising error-correction capabilities. Yet, decoding polar codes is often challenging, particularly with large blocks, with recently proposed decoders based on list-decoding or neural-decoding. The former applies multiple decoders, while the latter family learns to decode from data. In this work we introduce a novel polar decoder that combines list-decoding with neural-decoding, by forming an ensemble of multiple weighted belief-propagation (BP) decoders trained with different data. We employ the cyclic-redundancy check code as a proxy for combining the ensemble decoders and selecting the most-likely decoded word after inference, while facilitating real-time decoding. We evaluate our decoder over a wide range of polar codes lengths, empirically showing gains of around 0.25dB in frame-error rate. Our complexity and latency analysis shows that the number of operations approaches that of a single BP decoder at high SNR.

DOI
10.1109/icassp48485.2024.10447608

Related papers

Neural Belief Propagation Decoding of CRC-Polar Concatenated Codes

Nghia Doan, Seyyed Ali Hashemi, Elie Ngomseu Mambou +2 more

Polar codes are the first class of error correcting codes that provably achieve the channel capacity at infinite code length. They were selected for use in the fifth generation of cellular mobile communications (5G). In practical scenarios such as 5G, a cyclic redundancy check (CRC) is concatenated with polar codes to improve their finite length performance. This is mostly beneficial for sequential successive-cancellation list decoders. However, for parallel iterative belief propagation (BP) decoders, CRC is only used as an early stopping criterion with incremental error-correction performance improvement. In this paper, we first propose a CRC-polar BP (CPBP) decoder by exchanging the extrinsic information between the factor graph of the polar code and that of the CRC. We then propose a neural CPBP (NCPBP) algorithm which improves the CPBP decoder by introducing trainable normalizing weights on the concatenated factor graph. Our results on a 5G polar code of length 128 show that at the frame error rate of 10-5and with a maximum of 30 iterations, the error-correction performance of CPBP and NCPBP are approximately 0.25 dB and 0.5 dB better than that of the conventional CRC-aided BP decoder, respectively, while introducing almost no latency overhead.

arXiv:1811.00124•International Conference on Communications•May 1, 2019•60 citations

A Polar Subcode Approach to Belief Propagation List Decoding

Marvin Geiselhart, Ahmed Elkelesh, Jannis Clausius +1 more

Permutation decoding gained recent interest as it can exploit the symmetries of a code in a parallel fashion. Moreover, it has been shown that by viewing permuted polar codes as polar subcodes, the set of usable permutations in permutation decoding can be increased. We extend this idea to pre-transformed polar codes, such as cyclic redundancy check (CRC)-aided polar codes, which previously could not be decoded using permutations due to their lack of automorphisms. Using belief propagation (BP)-based subdecoders, we showcase a performance close to CRC-aided SCL (CA-SCL) decoding. The proposed algorithm outperforms the previously best performing iterative CRC-aided belief propagation list (CA-BPL) decoder both in error-rate performance and decoding latency.

arXiv:2205.06631•IEEE Information Theory Workshop (ITW)•Nov 1, 2022•8 citations

An Enhanced Belief Propagation Decoder for Polar Codes

Meng Zhang, Zhuo Li, Lijuan Xing

Belief propagation (BP) has attracted increasing attention due to its high parallelism. In this letter, a correction method is proposed to improve the block error rate (BLER) performance of the BP decoder for polar codes so that it is comparable to that of the successive cancellation list (SCL) decoder. Compared with BP flipping (BPF) decoding, the proposed decoder focuses on prior knowledge of the code bits in the factor graph. Two strategies have been proposed to construct the correction set. The simulation results show that the BPC decoder exhibits a BLER similar to that of BPF decoder while reducing the average latency and complexity by half. In addition, the BLER of the BPC decoder can approach that of the cyclic redundancy check (CRC)-aided SCL (CA-SCL) decoder in regions with low and medium signal-to-noise ratios (SNRs).

IEEE Communications Letters•Aug 11, 2021•17 citations

CRC-Aided Belief Propagation List Decoding of Polar Codes

Marvin Geiselhart, Ahmed Elkelesh, Moustafa Ebada +2 more

Although iterative decoding of polar codes has recently made huge progress based on the idea of permuted factor graphs, it still suffers from a non-negligible performance degradation when compared to state-of-the-art CRC-aided successive cancellation list (CA-SCL) decoding. In this work, we show that iterative decoding of polar codes based on the belief propagation list (BPL) algorithm can approach the error-rate performance of CA-SCL decoding and, thus, can be efficiently used for decoding the standardized 5G polar codes. Rather than only utilizing the cyclic redundancy check (CRC) as a stopping condition (i.e., for error-detection), we also aim to benefit from the error-correction capabilities of the outer CRC code. For this, we develop two distinct soft-decision CRC decoding algorithms: a Bahl-Cocke-Jelinek-Raviv (BCJR)-based approach and a sum product algorithm (SPA)-based approach. Further, an optimized selection of permuted factor graphs is analyzed and shown to reduce the decoding complexity significantly. Finally, we benchmark the proposed CRC-aided belief propagation list (CA-BPL) decoding to state-of-the-art 5G polar codes under CA-SCL decoding and, thereby, showcase an error-rate performance not just close to the CA-SCL but also close to the maximum likelihood (ML) bound as estimated by ordered statistic decoding (OSD).

arXiv:2001.05303•IEEE International Symposium on Information Theory (ISIT)•Jun 1, 2020•56 citations

Enhancing Belief Propagation Decoding of Polar Codes: A Reinforcement Learning Approach

Mohsen Moradi, Salman Habib, David G. M. Mitchell

Short block-length polar-like codes showcase exceptional error correction performance (ECP) using sequential decoding or successive cancellation list decoding with a large list size. However, achieving a high level of reliability with these methods involves high-latency decoding. To meet the growing demand for low-latency communication with acceptable complexity, belief propagation (BP) decoding emerges as an attractive option, although its ECP is known to fall short of those high-latency alternatives. In this paper, we propose an enhanced BP decoding approach for polar codes, leveraging reinforcement learning (RL) to optimize the message-passing schedule. Moreover, we investigate the design of the polar code rate profile and corresponding Tanner graph representation to enhance the benefits of RL. Numerical results demonstrate a performance gain of more than 1 dB for polar codes with a length of 128 and a rate of 0.5 compared to conventional BP decoding alone at highEb/N0values, demonstrating the promise of the proposed approach.

IEEE Communications Letters•Apr 9, 2025•4 citations

Higher-Order Belief Propagation Correction Decoder for Polar Codes

Meng Zhang, Zhuo Li, Lijuan Xing +1 more

Belief propagation (BP) decoding for polar codes has been extensively studied because of its inherent parallelism. However, its performance remains inferior to that of successive cancellation list decoding (SCL) due to the structure of the decoding graph. To improve the block error rate (BLER) performance, the BP correction (BPC) decoding, a post-processing scheme that corrects prior knowledge of the identified code bit, improves convergence by executing additional iterations on the failed BP decoder. Moreover, the BPC decoder demonstrates a better decoding performance than the BP-based bit-flipping decoder. Nevertheless, the additional decoding attempts lead to increased latency. In this article, a modified BPC decoder is proposed to reduce the number of decoding attempts by redefining the correction rules. A new metric is designed to effectively identify the corrected location. Numerical results show that the proposed modified BPC decoder achieves a slight improvement in BLER compared with the original BPC, with a dramatic reduction in average complexity. Furthermore, a higher-order version, named MBPC-Ω, is extended to further improve the performance, where the Ω is the maximum correction order. Numerical results show that the higher-order modified BPC achieves a similar BLER performance to existing multiple bit-flipping BP decoders but has around half the latency overhead. In addition, the proposed MBPC-2 decoder performs better than the cyclic redundancy check-aided SCL (CA-SCL) decoder with list size 4 and is slightly worse than the CA-SCL with list size 8 in high signal-to-noise ratio (SNR) regions but with significant decoding latency reduction.

Entropy•Apr 11, 2022•3 citations
Polar codes have promising error-correction capabilities. Yet, decoding polar codes is often challenging, particularly with large blocks, with recently proposed decoders based on list-decoding or neural-decoding. The former applies multiple decoders, while the latter family learns to decode from data. In this work we introduce a novel polar decoder that combines list-decoding with neural-decoding, by forming an ensemble of multiple weighted belief-propagation (BP) decoders trained with different data. We employ the cyclic-redundancy check code as a proxy for combining the ensemble decoders and selecting the most-likely decoded word after inference, while facilitating real-time decoding. We evaluate our decoder over a wide range of polar codes lengths, empirically showing gains of around 0.25dB in frame-error rate. Our complexity and latency analysis shows that the number of operations approaches that of a single BP decoder at high SNR.
Polar codes are the first class of error correcting codes that provably achieve the channel capacity at infinite code length. They were selected for use in the fifth generation of cellular mobile communications (5G). In practical scenarios such as 5G, a cyclic redundancy check (CRC) is concatenated with polar codes to improve their finite length performance. This is mostly beneficial for sequential successive-cancellation list decoders. However, for parallel iterative belief propagation (BP) decoders, CRC is only used as an early stopping criterion with incremental error-correction performance improvement. In this paper, we first propose a CRC-polar BP (CPBP) decoder by exchanging the extrinsic information between the factor graph of the polar code and that of the CRC. We then propose a neural CPBP (NCPBP) algorithm which improves the CPBP decoder by introducing trainable normalizing weights on the concatenated factor graph. Our results on a 5G polar code of length 128 show that at the frame error rate of 10-5and with a maximum of 30 iterations, the error-correction performance of CPBP and NCPBP are approximately 0.25 dB and 0.5 dB better than that of the conventional CRC-aided BP decoder, respectively, while introducing almost no latency overhead.
Permutation decoding gained recent interest as it can exploit the symmetries of a code in a parallel fashion. Moreover, it has been shown that by viewing permuted polar codes as polar subcodes, the set of usable permutations in permutation decoding can be increased. We extend this idea to pre-transformed polar codes, such as cyclic redundancy check (CRC)-aided polar codes, which previously could not be decoded using permutations due to their lack of automorphisms. Using belief propagation (BP)-based subdecoders, we showcase a performance close to CRC-aided SCL (CA-SCL) decoding. The proposed algorithm outperforms the previously best performing iterative CRC-aided belief propagation list (CA-BPL) decoder both in error-rate performance and decoding latency.
Belief propagation (BP) has attracted increasing attention due to its high parallelism. In this letter, a correction method is proposed to improve the block error rate (BLER) performance of the BP decoder for polar codes so that it is comparable to that of the successive cancellation list (SCL) decoder. Compared with BP flipping (BPF) decoding, the proposed decoder focuses on prior knowledge of the code bits in the factor graph. Two strategies have been proposed to construct the correction set. The simulation results show that the BPC decoder exhibits a BLER similar to that of BPF decoder while reducing the average latency and complexity by half. In addition, the BLER of the BPC decoder can approach that of the cyclic redundancy check (CRC)-aided SCL (CA-SCL) decoder in regions with low and medium signal-to-noise ratios (SNRs).
Although iterative decoding of polar codes has recently made huge progress based on the idea of permuted factor graphs, it still suffers from a non-negligible performance degradation when compared to state-of-the-art CRC-aided successive cancellation list (CA-SCL) decoding. In this work, we show that iterative decoding of polar codes based on the belief propagation list (BPL) algorithm can approach the error-rate performance of CA-SCL decoding and, thus, can be efficiently used for decoding the standardized 5G polar codes. Rather than only utilizing the cyclic redundancy check (CRC) as a stopping condition (i.e., for error-detection), we also aim to benefit from the error-correction capabilities of the outer CRC code. For this, we develop two distinct soft-decision CRC decoding algorithms: a Bahl-Cocke-Jelinek-Raviv (BCJR)-based approach and a sum product algorithm (SPA)-based approach. Further, an optimized selection of permuted factor graphs is analyzed and shown to reduce the decoding complexity significantly. Finally, we benchmark the proposed CRC-aided belief propagation list (CA-BPL) decoding to state-of-the-art 5G polar codes under CA-SCL decoding and, thereby, showcase an error-rate performance not just close to the CA-SCL but also close to the maximum likelihood (ML) bound as estimated by ordered statistic decoding (OSD).
Short block-length polar-like codes showcase exceptional error correction performance (ECP) using sequential decoding or successive cancellation list decoding with a large list size. However, achieving a high level of reliability with these methods involves high-latency decoding. To meet the growing demand for low-latency communication with acceptable complexity, belief propagation (BP) decoding emerges as an attractive option, although its ECP is known to fall short of those high-latency alternatives. In this paper, we propose an enhanced BP decoding approach for polar codes, leveraging reinforcement learning (RL) to optimize the message-passing schedule. Moreover, we investigate the design of the polar code rate profile and corresponding Tanner graph representation to enhance the benefits of RL. Numerical results demonstrate a performance gain of more than 1 dB for polar codes with a length of 128 and a rate of 0.5 compared to conventional BP decoding alone at highEb/N0values, demonstrating the promise of the proposed approach.
Belief propagation (BP) decoding for polar codes has been extensively studied because of its inherent parallelism. However, its performance remains inferior to that of successive cancellation list decoding (SCL) due to the structure of the decoding graph. To improve the block error rate (BLER) performance, the BP correction (BPC) decoding, a post-processing scheme that corrects prior knowledge of the identified code bit, improves convergence by executing additional iterations on the failed BP decoder. Moreover, the BPC decoder demonstrates a better decoding performance than the BP-based bit-flipping decoder. Nevertheless, the additional decoding attempts lead to increased latency. In this article, a modified BPC decoder is proposed to reduce the number of decoding attempts by redefining the correction rules. A new metric is designed to effectively identify the corrected location. Numerical results show that the proposed modified BPC decoder achieves a slight improvement in BLER compared with the original BPC, with a dramatic reduction in average complexity. Furthermore, a higher-order version, named MBPC-Ω, is extended to further improve the performance, where the Ω is the maximum correction order. Numerical results show that the higher-order modified BPC achieves a similar BLER performance to existing multiple bit-flipping BP decoders but has around half the latency overhead. In addition, the proposed MBPC-2 decoder performs better than the cyclic redundancy check-aided SCL (CA-SCL) decoder with list size 4 and is slightly worse than the CA-SCL with list size 8 in high signal-to-noise ratio (SNR) regions but with significant decoding latency reduction.