Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2212.14627 · Physical Review Applied

Quantum State Tomography for Kerr Parametric Oscillators

Yuta Suzuki, Shiro Kawabata, Tsuyoshi Yamamoto, Shumpei Masuda

Published Sep 14, 2023• 8 citations
arXivHTMLPDF

Abstract

Kerr parametric oscillators (KPOs) implemented in the circuit quantum electrodynamic architecture can operate as qubits. Their applications to quantum annealing and universal quantum computation have been studied intensively. For these applications, the readout of the state of KPOs is of practical importance. We develop a scheme of state tomography for KPOs with reflection measurement. Although it is known that the reflection coefficient depends on the state of the KPO, it is unclear whether tomography of a qubit encoded into a KPO can be performed in a practical way mitigating decoherence during the measurement, and how accurate it is. We show that the reflection coefficient has a one-to-one correspondence with a diagonal element of the density matrix of the qubit when a probe frequency is properly chosen and an additional single-photon drive is introduced. Thus, our scheme offers a novel way to read out the qubit along an axis of the Bloch sphere, and therefore the reflection measurement and single-qubit gates can constitute state tomography.

DOI
10.1103/physrevapplied.20.034031

Related papers

Spectroscopy of flux-driven Kerr parametric oscillators by reflection coefficient measurement

Aiko Yamaguchi, Shumpei Masuda, Yuichiro Matsuzaki +7 more

Abstract We report the spectroscopic characterization of a Kerr parametric oscillator (KPO) based on the measurement of its reflection coefficient under a two-photon drive induced by flux modulation. The measured reflection spectra show good agreement with numerical simulations in terms of their dependence on the two-photon drive amplitude. The spectra can be interpreted as changes in system’s eigenenergies, transition matrix elements, and the population of the eigenstates, although the linewidth of the resonance structure is not fully explained. We also show that the drive-amplitude dependence of the spectra can be explained analytically by using the concepts of Rabi splitting and the Stark shift. By comparing the experimentally obtained spectra with theory, we show that the two-photon drive amplitude at the device can be precisely determined, which is important for the application of KPOs in quantum information processing.

arXiv:2309.10488•New Journal of Physics•Apr 1, 2024•18 citations

Theoretical study of reflection spectroscopy for superconducting quantum parametrons

Shumpei Masuda, Aiko Yamaguchi, T. Yamaji +4 more

Abstract Superconducting parametrons in the single-photon Kerr regime, also called KPOs, have been attracting increasing attention in terms of their applications to quantum annealing and universal quantum computation. It is of practical importance to obtain information of superconducting parametrons operating under an oscillating pump field. Spectroscopy can provide information of a superconducting parametron under examination, such as energy level structure, and also useful information for calibration of the pump field. We theoretically study the reflection spectroscopy of superconducting parametrons, and develop a method to obtain the reflection coefficient. We present formulae of the reflection coefficient, the nominal external and the internal decay rates, and examine the obtained spectra. It is shown that the difference of the populations of energy levels manifests itself as a dip or peak in the amplitude of the reflection coefficient, and one can directly extract the coupling strength between the energy levels by measuring the nominal decay rates when the pump field is sufficiently large.

arXiv:2106.04137•New Journal of Physics•Aug 27, 2021•12 citations

Fast elementary gates for universal quantum computation with Kerr parametric oscillator qubits

Taro Kanao, Hayato Goto

Kerr parametric oscillators (KPOs) can stabilize the superpositions of coherent states, which can be utilized as qubits, and are promising candidates for realizing hardware-efficient quantum computers. Although elementary gates for universal quantum computation with KPO qubits have been proposed, these gates are usually based on adiabatic operations and thus need long gate times, which result in errors caused by photon loss in KPOs realized by, e.g., superconducting circuits. In this work we accelerate the elementary gates by experimentally feasible control methods, which are based on numerical optimization of pulse shapes for shortcuts to adiabaticity. By numerical simulations, we show that the proposed methods can achieve speedups compared to adiabatic ones by up to six times with high gate fidelities of 99.9%. These methods are thus expected to be useful for quantum computers with KPOs.

arXiv:2310.20108•Physical Review Research•Feb 22, 2024•10 citations

Phase transitions, symmetries, and tunneling in Kerr parametric oscillators

Miguel A. Prado Reynoso, Edson M. Signor, Jamil Khalouf-Rivera +3 more

Quantum Kerr parametric oscillators (KPOs) are systems out of equilibrium with a wide range of applications in quantum computing, quantum sensing, and fundamental research. They have been realized in superconducting circuits and photonic platforms. In this work, we explore the onset of ground-state and excited-state quantum phase transitions in KPOs, focusing on the role of the phase-space rotational symmetry when the driving frequency is $\ensuremath{\mu}$ times the oscillator's natural frequency, specifically for $\ensuremath{\mu}=1,2,3,4$. These cases are experimentally accessible in superconducting circuits, where the Floquet quasienergy spectrum can also be studied as a function of tunable control parameters. Using the classical Hamiltonian of the system, we identify the stationary points associated with quantum phase transitions and analyze the emergence of both real and avoided level crossings, examining their influence on the energy spectrum and tunneling dynamics. Our findings provide insights into the engineering of robust quantum states, quantum dynamics control, and onset of quantum phase transitions with implications for critical quantum sensing.

arXiv:2504.15347•Physical Review A•Aug 7, 2025•5 citations

Expressive quantum supervised machine learning using Kerr-nonlinear parametric oscillators

Yuichiro Mori, Kouhei Nakaji, Yuichiro Matsuzaki +1 more

Abstract Quantum machine learning with variational quantum algorithms (VQA) has been actively investigated as a practical algorithm in the noisy intermediate-scale quantum (NISQ) era. Recent researches reveal that the data reuploading, which repeatedly encode classical data into quantum circuit, is necessary for obtaining the expressive quantum machine learning model in the conventional quantum computing architecture. However, the data reuploading tends to require a large amount of quantum resources, which motivates us to find an alternative strategy for realizing the expressive quantum machine learning efficiently. In this paper, we propose quantum machine learning with Kerr-nonlinear parametric oscillators (KPOs), as another promising quantum computing device. We use not only the ground state and first excited state but also higher excited states, which allows us to use a large Hilbert space even if we have a single KPO. Our numerical simulations show that the expressibility of our method with only one mode of the KPO is much higher than that of the conventional method with six qubits. Our results pave the way towards resource-efficient quantum machine learning, which is essential for the practical applications in the NISQ era.

arXiv:2305.00688•Quantum Machine Intelligence•Mar 4, 2024•10 citations

Quantum Operations on Integrated Photonic Circuits: State Tomography and Coherence Measurements

Wilder R. Cardoso

This work proposes to carry out a study on integrated photonic circuits. Our goal is to develop a methodology for obtaining the parameters of a photonic circuit that allows us to perform a set of quantum operations necessary for the realization of a given task or quantum processing. More specifically, the quantum tasks involve the implementation of a POVM (Positive Operator Value Measure) through integrated photonic circuits. Thus, we seek to obtain optimized configurations for these devices so that the reduction of their structural complexity simplifies their manufacturing process. In addition, it is also our goal that such objects are robust against errors and losses and that the experimental applications that involve them present a minimization of the time necessary for their realization. We studied the symmetries of the proposed POVMs to, from them, configure the circuit in an optimized way. Initially, we studied the case of quantum state tomography for qubits and qutrits. We obtained planar circuits that had a smaller number of optical elements and an optical depth than those obtained by methods already known in the literature. In addition, these circuits implement all POVM elements at once, making it possible to obtain all their associated probabilities at once, minimizing the time spent on the experiment compared to experiments on an optical table or with reconfigurable circuits, where it is necessary to make changes to the configuration of the experimental apparatus from one POVM element to another. Looking for a way to generalize our protocol to larger systems, we developed a method to obtain three-dimensional photonic circuits that can be used in the experimental realization of quantum state tomography in qudits of any finite dimension. Our protocol generates circuits whose number of beam splitters and optical depth scale with functions less than in other protocols already known, showing a drastic reduction in their complexity. In addition, these circuits were highly robust in relation to the occurrence of losses. The same protocol used to obtain three-dimensional circuits for performing quantum tomography can be used to obtain circuits to implement quantum coherence measurements. The circuits obtained here also have the same advantages as the tomographic case.

•Jul 9, 2020•0 citations
Kerr parametric oscillators (KPOs) implemented in the circuit quantum electrodynamic architecture can operate as qubits. Their applications to quantum annealing and universal quantum computation have been studied intensively. For these applications, the readout of the state of KPOs is of practical importance. We develop a scheme of state tomography for KPOs with reflection measurement. Although it is known that the reflection coefficient depends on the state of the KPO, it is unclear whether tomography of a qubit encoded into a KPO can be performed in a practical way mitigating decoherence during the measurement, and how accurate it is. We show that the reflection coefficient has a one-to-one correspondence with a diagonal element of the density matrix of the qubit when a probe frequency is properly chosen and an additional single-photon drive is introduced. Thus, our scheme offers a novel way to read out the qubit along an axis of the Bloch sphere, and therefore the reflection measurement and single-qubit gates can constitute state tomography.
Abstract We report the spectroscopic characterization of a Kerr parametric oscillator (KPO) based on the measurement of its reflection coefficient under a two-photon drive induced by flux modulation. The measured reflection spectra show good agreement with numerical simulations in terms of their dependence on the two-photon drive amplitude. The spectra can be interpreted as changes in system’s eigenenergies, transition matrix elements, and the population of the eigenstates, although the linewidth of the resonance structure is not fully explained. We also show that the drive-amplitude dependence of the spectra can be explained analytically by using the concepts of Rabi splitting and the Stark shift. By comparing the experimentally obtained spectra with theory, we show that the two-photon drive amplitude at the device can be precisely determined, which is important for the application of KPOs in quantum information processing.
Abstract Superconducting parametrons in the single-photon Kerr regime, also called KPOs, have been attracting increasing attention in terms of their applications to quantum annealing and universal quantum computation. It is of practical importance to obtain information of superconducting parametrons operating under an oscillating pump field. Spectroscopy can provide information of a superconducting parametron under examination, such as energy level structure, and also useful information for calibration of the pump field. We theoretically study the reflection spectroscopy of superconducting parametrons, and develop a method to obtain the reflection coefficient. We present formulae of the reflection coefficient, the nominal external and the internal decay rates, and examine the obtained spectra. It is shown that the difference of the populations of energy levels manifests itself as a dip or peak in the amplitude of the reflection coefficient, and one can directly extract the coupling strength between the energy levels by measuring the nominal decay rates when the pump field is sufficiently large.
Kerr parametric oscillators (KPOs) can stabilize the superpositions of coherent states, which can be utilized as qubits, and are promising candidates for realizing hardware-efficient quantum computers. Although elementary gates for universal quantum computation with KPO qubits have been proposed, these gates are usually based on adiabatic operations and thus need long gate times, which result in errors caused by photon loss in KPOs realized by, e.g., superconducting circuits. In this work we accelerate the elementary gates by experimentally feasible control methods, which are based on numerical optimization of pulse shapes for shortcuts to adiabaticity. By numerical simulations, we show that the proposed methods can achieve speedups compared to adiabatic ones by up to six times with high gate fidelities of 99.9%. These methods are thus expected to be useful for quantum computers with KPOs.
Quantum Kerr parametric oscillators (KPOs) are systems out of equilibrium with a wide range of applications in quantum computing, quantum sensing, and fundamental research. They have been realized in superconducting circuits and photonic platforms. In this work, we explore the onset of ground-state and excited-state quantum phase transitions in KPOs, focusing on the role of the phase-space rotational symmetry when the driving frequency is $\ensuremath{\mu}$ times the oscillator's natural frequency, specifically for $\ensuremath{\mu}=1,2,3,4$. These cases are experimentally accessible in superconducting circuits, where the Floquet quasienergy spectrum can also be studied as a function of tunable control parameters. Using the classical Hamiltonian of the system, we identify the stationary points associated with quantum phase transitions and analyze the emergence of both real and avoided level crossings, examining their influence on the energy spectrum and tunneling dynamics. Our findings provide insights into the engineering of robust quantum states, quantum dynamics control, and onset of quantum phase transitions with implications for critical quantum sensing.
Abstract Quantum machine learning with variational quantum algorithms (VQA) has been actively investigated as a practical algorithm in the noisy intermediate-scale quantum (NISQ) era. Recent researches reveal that the data reuploading, which repeatedly encode classical data into quantum circuit, is necessary for obtaining the expressive quantum machine learning model in the conventional quantum computing architecture. However, the data reuploading tends to require a large amount of quantum resources, which motivates us to find an alternative strategy for realizing the expressive quantum machine learning efficiently. In this paper, we propose quantum machine learning with Kerr-nonlinear parametric oscillators (KPOs), as another promising quantum computing device. We use not only the ground state and first excited state but also higher excited states, which allows us to use a large Hilbert space even if we have a single KPO. Our numerical simulations show that the expressibility of our method with only one mode of the KPO is much higher than that of the conventional method with six qubits. Our results pave the way towards resource-efficient quantum machine learning, which is essential for the practical applications in the NISQ era.
This work proposes to carry out a study on integrated photonic circuits. Our goal is to develop a methodology for obtaining the parameters of a photonic circuit that allows us to perform a set of quantum operations necessary for the realization of a given task or quantum processing. More specifically, the quantum tasks involve the implementation of a POVM (Positive Operator Value Measure) through integrated photonic circuits. Thus, we seek to obtain optimized configurations for these devices so that the reduction of their structural complexity simplifies their manufacturing process. In addition, it is also our goal that such objects are robust against errors and losses and that the experimental applications that involve them present a minimization of the time necessary for their realization. We studied the symmetries of the proposed POVMs to, from them, configure the circuit in an optimized way. Initially, we studied the case of quantum state tomography for qubits and qutrits. We obtained planar circuits that had a smaller number of optical elements and an optical depth than those obtained by methods already known in the literature. In addition, these circuits implement all POVM elements at once, making it possible to obtain all their associated probabilities at once, minimizing the time spent on the experiment compared to experiments on an optical table or with reconfigurable circuits, where it is necessary to make changes to the configuration of the experimental apparatus from one POVM element to another. Looking for a way to generalize our protocol to larger systems, we developed a method to obtain three-dimensional photonic circuits that can be used in the experimental realization of quantum state tomography in qudits of any finite dimension. Our protocol generates circuits whose number of beam splitters and optical depth scale with functions less than in other protocols already known, showing a drastic reduction in their complexity. In addition, these circuits were highly robust in relation to the occurrence of losses. The same protocol used to obtain three-dimensional circuits for performing quantum tomography can be used to obtain circuits to implement quantum coherence measurements. The circuits obtained here also have the same advantages as the tomographic case.