Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2212.10395 · Quantum

Reqomp: Space-constrained Uncomputation for Quantum Circuits

Anouk Paradis, Benjamin Bichsel, Martin Vechev

Published Feb 19, 2024• 18 citations
arXivHTMLPDF

Abstract

Quantum circuits must run on quantum computers with tight limits on qubit and gate counts. To generate circuits respecting both limits, a promising opportunity is exploiting uncomputation to trade qubits for gates. We present Reqomp, a method to automatically synthesize correct and efficient uncomputation of ancillae while respecting hardware constraints. For a given circuit, Reqomp can offer a wide range of trade-offs between tightly constraining qubit count or gate count. Our evaluation demonstrates that Reqomp can significantly reduce the number of required ancilla qubits by up to 96%. On 80% of our benchmarks, the ancilla qubits required can be reduced by at least 25% while never incurring a gate count increase beyond 28%.

DOI
10.22331/q-2024-02-19-1258

Related papers

Uncomputing Ancilla Qubits in Quantum Circuits

Ashutosh Tiwari, Ranjani G. Sundaram, Himanshu Gupta +2 more

Uncomputation of ancilla qubits is essential in quantum computing to reset auxiliary qubits to a zero state, ensuring their safe discarding and reducing resource overhead. Current methods for uncomputation either rely on manual procedures or use additional ancilla qubits to store intermediate computation results, which increases qubit storage requirements. Additionally, most in-place uncomputation techniques employ an all-or-nothing strategy, wherein they perform uncomputation only when all ancilla qubits in the given circuit can be uncomputed.In this work, we tackle the problem of uncomputing a maximum number of ancilla qubits in a quantum circuit with minimal qubit storage overhead. We propose a novel approach where partial uncomputation—reverting the last ’m’ gates—enables the uncomputation of more qubits. We present three algorithms designed to uncompute the largest possible set of ancilla qubits and demonstrate their effectiveness through experiments on various randomly generated quantum circuits.

International Conference on Quantum Communications, Networking, and Computing (QCNC)•Mar 31, 2025•3 citations

Unqomp: synthesizing uncomputation in Quantum circuits

Anouk Paradis, Benjamin Bichsel, Samuel Steffen +1 more

A key challenge when writing quantum programs is the need for uncomputation: temporary values produced during the computation must be reset to zero before they can be safely discarded. Unfortunately, most existing quantum languages require tedious manual uncomputation, often leading to inefficient and error-prone programs. We present Unqomp, the first procedure to automatically synthesize uncomputation in a given quantum circuit. Unqomp can be readily integrated into popular quantum languages, allowing the programmer to allocate and use temporary values analogously to classical computation, knowing they will be uncomputed by Unqomp. Our evaluation shows that programs leveraging Unqomp are not only shorter (-19% on average), but also generate more efficient circuits (-71% gates and -19% qubits on average).

ACM SIGPLAN Conference on Programming Language Design and Implementation (PLDI)•Jun 18, 2021•43 citations

Optimizing Ancilla-Based Quantum Circuits with SPARE

Ritvik Sharma, Sara Achour

Many quantum algorithms instantiate and use ancillas, spare qubits that serve as temporary storage in a quantum circuit. In particular, many recently developed high-level and modular quantum programming languages (QPLs) use ancilla qubits to implement various programming constructs. These are lowered to circuits with nested/cascading compute-uncompute gate sequences that use ancilla qubits to track internal state. We present SPARE, a rewrite-based quantum circuit optimizer that restructures these compute-uncompute gate sequences, leveraging the ancilla qubit state information to optimize the circuit. In this work, we prove the correctness of SPARE’s rewrites and link SPARE’s gate-level transforms to language-level program rewrites, which may be performed on the input language. We evaluate SPARE on QPL-generated quantum circuits against Unqomp and Spire, two optimizing compilers for QPLs. SPARE achieves a reduction of up to 27.3 % in qubit count, 56.7 % in 2 -qubit gates, 68.2 % in 1-qubit gates and 73.9 % in depth against Unqomp, and up to 17.8 % in qubits, 67.3 % in 2-qubit gates, 61.4 % in 1-qubit gates and 59.9 % in depth against Spire. We also evaluate SPARE against the Quartz, Feynman, and PyZX circuit optimizers: SPARE achieves up to a 70.0 % reduction in two-qubit gates, up to a 53.6 % reduction in 1-qubit gates, and up to a 56.7 % reduction in depth compared to the best result from all the gate-level optimizers.

Proceedings of the ACM on Programming Languages•Jun 10, 2025•9 citations

MBUndo: Sound, Automatic, and Efficient Measurement-Based Uncomputation for Quantum Circuits

Shengyuan Yang, Charles Yuan

Quantum programs that use temporary values, known as \emph{ancilla} qubits, must explicitly \emph{uncompute} each ancilla back to zero to ensure that the program produces correct outputs. Conventional uncomputation uses unitary quantum gates, whereas leading quantum algorithms now leverage \emph{measurement-based uncomputation} (MBU), which replaces costly unitary $T$ gates with cheaper measurements and phase corrections. Current quantum programming frameworks can use measurement to uncompute specific gates such as Toffoli. No automatic transformation, however, accepts an arbitrary circuit whose ancillas are computed and uncomputed via the standard approach and converts the circuit to use MBU\@. Researchers instead apply MBU to individual circuit designs by hand, which limits algorithm development and compiler optimization. Such a transformation has not existed due to two fundamental unknowns: where MBU applies and which gates realize MBU for an arbitrary computation. To solve these, we first present a static analysis that identifies, for each ancilla qubit, each circuit position where measurement is sound --- subsuming basic assumptions that MBU only applies at the end of a circuit. Next, we present circuit transformations that soundly turn unitary uncomputation gates into efficient phase corrections after measurement --- generalizing rewrite rules from prior literature that are either limited to a single gate or not applicable to a general circuit. We present \textsf{MBUndo}, an integrated compiler pass that automatically converts circuits to measurement-based uncomputation. It requires no user annotations other than which qubits are ancillas, the same as needed by existing uncomputation synthesizers, and can enhance their output circuits. We evaluate \textsf{MBUndo} on 22 benchmarks to reveal \emph{T} gate reductions of ${>}36.5\%$ over uncomputation synthesizers.

cs.PLCross-listedarXiv:2611.02345•Nov 3, 2026•0 citations

Quantum Uncomputation of Clean and Dirty Ancilla Qubits

Chenke Liu, Li Zhou, Boning Meng

Automatic uncomputation aims to provide programming-language-level support to facilitate the correct and safe use of ancilla qubits in quantum computing, but efforts have only been made for clean ancillas, leaving dirty ancillas unexplored. We present a unified formalization of the uncomputation of both clean and dirty ancillas. For the first time, we prove that checking the existence of uncomputation is coNP-hard. We introduce two complementary synthesis-oriented existence checking methods: a syntax-directed static reasoning system and a rewrite-based normalization procedure (\RwUnx), together forming a top-down pipeline. We implement \RwUnx in Qiskit. Compared with the state-of-the-art \Reqompx, \RwUnx handles practical benchmarks with complex dependencies where \Reqompx does not, and achieves higher success rates in random-circuit experiments.

cs.PLCross-listedarXiv:2608.09578•Proceedings of the ACM on Programming Languages•Aug 11, 2026•1 citation

Modular Synthesis of Efficient Quantum Uncomputation

Hristo Venev, Timon Gehr, Dimitar I. Dimitrov +1 more

A key challenge of quantum programming is uncomputation: the reversible deallocation of qubits. And while there has been much recent progress on automating uncomputation, state-of-the-art methods are insufficient for handling today's expressive quantum programming languages. A core reason is that they operate on primitive quantum circuits, while quantum programs express computations beyond circuits, for instance, they can capture families of circuits defined recursively in terms of uncomputation and adjoints. In this paper, we introduce the first modular automatic approach to synthesize correct and efficient uncomputation for expressive quantum programs. Our method is based on two core technical contributions: (i) an intermediate representation (IR) that can capture expressive quantum programs and comes with support for uncomputation, and (ii) modular algorithms over that IR for synthesizing uncomputation and adjoints. We have built a complete end-to-end implementation of our method, including an implementation of the IR and the synthesis algorithms, as well as a translation from an expressive fragment of the Silq programming language to our IR and circuit generation from the IR. Our experimental evaluation demonstrates that we can handle programs beyond the capabilities of existing uncomputation approaches, while being competitive on the benchmarks they can handle. More broadly, we show that it is possible to benefit from the greater expressivity and safety offered by high-level quantum languages without sacrificing efficiency.

arXiv:2406.14227•Proceedings of the ACM on Programming Languages•Oct 8, 2024•14 citations
Quantum circuits must run on quantum computers with tight limits on qubit and gate counts. To generate circuits respecting both limits, a promising opportunity is exploiting uncomputation to trade qubits for gates. We present Reqomp, a method to automatically synthesize correct and efficient uncomputation of ancillae while respecting hardware constraints. For a given circuit, Reqomp can offer a wide range of trade-offs between tightly constraining qubit count or gate count. Our evaluation demonstrates that Reqomp can significantly reduce the number of required ancilla qubits by up to 96%. On 80% of our benchmarks, the ancilla qubits required can be reduced by at least 25% while never incurring a gate count increase beyond 28%.
Uncomputation of ancilla qubits is essential in quantum computing to reset auxiliary qubits to a zero state, ensuring their safe discarding and reducing resource overhead. Current methods for uncomputation either rely on manual procedures or use additional ancilla qubits to store intermediate computation results, which increases qubit storage requirements. Additionally, most in-place uncomputation techniques employ an all-or-nothing strategy, wherein they perform uncomputation only when all ancilla qubits in the given circuit can be uncomputed.In this work, we tackle the problem of uncomputing a maximum number of ancilla qubits in a quantum circuit with minimal qubit storage overhead. We propose a novel approach where partial uncomputation—reverting the last ’m’ gates—enables the uncomputation of more qubits. We present three algorithms designed to uncompute the largest possible set of ancilla qubits and demonstrate their effectiveness through experiments on various randomly generated quantum circuits.
A key challenge when writing quantum programs is the need for uncomputation: temporary values produced during the computation must be reset to zero before they can be safely discarded. Unfortunately, most existing quantum languages require tedious manual uncomputation, often leading to inefficient and error-prone programs. We present Unqomp, the first procedure to automatically synthesize uncomputation in a given quantum circuit. Unqomp can be readily integrated into popular quantum languages, allowing the programmer to allocate and use temporary values analogously to classical computation, knowing they will be uncomputed by Unqomp. Our evaluation shows that programs leveraging Unqomp are not only shorter (-19% on average), but also generate more efficient circuits (-71% gates and -19% qubits on average).
Many quantum algorithms instantiate and use ancillas, spare qubits that serve as temporary storage in a quantum circuit. In particular, many recently developed high-level and modular quantum programming languages (QPLs) use ancilla qubits to implement various programming constructs. These are lowered to circuits with nested/cascading compute-uncompute gate sequences that use ancilla qubits to track internal state. We present SPARE, a rewrite-based quantum circuit optimizer that restructures these compute-uncompute gate sequences, leveraging the ancilla qubit state information to optimize the circuit. In this work, we prove the correctness of SPARE’s rewrites and link SPARE’s gate-level transforms to language-level program rewrites, which may be performed on the input language. We evaluate SPARE on QPL-generated quantum circuits against Unqomp and Spire, two optimizing compilers for QPLs. SPARE achieves a reduction of up to 27.3 % in qubit count, 56.7 % in 2 -qubit gates, 68.2 % in 1-qubit gates and 73.9 % in depth against Unqomp, and up to 17.8 % in qubits, 67.3 % in 2-qubit gates, 61.4 % in 1-qubit gates and 59.9 % in depth against Spire. We also evaluate SPARE against the Quartz, Feynman, and PyZX circuit optimizers: SPARE achieves up to a 70.0 % reduction in two-qubit gates, up to a 53.6 % reduction in 1-qubit gates, and up to a 56.7 % reduction in depth compared to the best result from all the gate-level optimizers.
Quantum programs that use temporary values, known as \emph{ancilla} qubits, must explicitly \emph{uncompute} each ancilla back to zero to ensure that the program produces correct outputs. Conventional uncomputation uses unitary quantum gates, whereas leading quantum algorithms now leverage \emph{measurement-based uncomputation} (MBU), which replaces costly unitary TTT gates with cheaper measurements and phase corrections. Current quantum programming frameworks can use measurement to uncompute specific gates such as Toffoli. No automatic transformation, however, accepts an arbitrary circuit whose ancillas are computed and uncomputed via the standard approach and converts the circuit to use MBU\@. Researchers instead apply MBU to individual circuit designs by hand, which limits algorithm development and compiler optimization. Such a transformation has not existed due to two fundamental unknowns: where MBU applies and which gates realize MBU for an arbitrary computation. To solve these, we first present a static analysis that identifies, for each ancilla qubit, each circuit position where measurement is sound --- subsuming basic assumptions that MBU only applies at the end of a circuit. Next, we present circuit transformations that soundly turn unitary uncomputation gates into efficient phase corrections after measurement --- generalizing rewrite rules from prior literature that are either limited to a single gate or not applicable to a general circuit. We present \textsf{MBUndo}, an integrated compiler pass that automatically converts circuits to measurement-based uncomputation. It requires no user annotations other than which qubits are ancillas, the same as needed by existing uncomputation synthesizers, and can enhance their output circuits. We evaluate \textsf{MBUndo} on 22 benchmarks to reveal \emph{T} gate reductions of >36.5%{>}36.5\%>36.5% over uncomputation synthesizers.
Automatic uncomputation aims to provide programming-language-level support to facilitate the correct and safe use of ancilla qubits in quantum computing, but efforts have only been made for clean ancillas, leaving dirty ancillas unexplored. We present a unified formalization of the uncomputation of both clean and dirty ancillas. For the first time, we prove that checking the existence of uncomputation is coNP-hard. We introduce two complementary synthesis-oriented existence checking methods: a syntax-directed static reasoning system and a rewrite-based normalization procedure (\RwUnx), together forming a top-down pipeline. We implement \RwUnx in Qiskit. Compared with the state-of-the-art \Reqompx, \RwUnx handles practical benchmarks with complex dependencies where \Reqompx does not, and achieves higher success rates in random-circuit experiments.
A key challenge of quantum programming is uncomputation: the reversible deallocation of qubits. And while there has been much recent progress on automating uncomputation, state-of-the-art methods are insufficient for handling today's expressive quantum programming languages. A core reason is that they operate on primitive quantum circuits, while quantum programs express computations beyond circuits, for instance, they can capture families of circuits defined recursively in terms of uncomputation and adjoints. In this paper, we introduce the first modular automatic approach to synthesize correct and efficient uncomputation for expressive quantum programs. Our method is based on two core technical contributions: (i) an intermediate representation (IR) that can capture expressive quantum programs and comes with support for uncomputation, and (ii) modular algorithms over that IR for synthesizing uncomputation and adjoints. We have built a complete end-to-end implementation of our method, including an implementation of the IR and the synthesis algorithms, as well as a translation from an expressive fragment of the Silq programming language to our IR and circuit generation from the IR. Our experimental evaluation demonstrates that we can handle programs beyond the capabilities of existing uncomputation approaches, while being competitive on the benchmarks they can handle. More broadly, we show that it is possible to benefit from the greater expressivity and safety offered by high-level quantum languages without sacrificing efficiency.