Most quantum circuits require SWAP gate insertion to run on quantum hardware with limited qubit connectivity. A promising SWAP gate insertion method for blocks of commuting two-qubit gates is a predetermined swap strategy which applies layers of SWAP gates simultaneously executable on the coupling map. A good initial mapping for the swap strategy reduces the number of required swap gates. However, even when a circuit consists of commuting gates, e.g., as in the Quantum Approximate Optimization Algorithm (QAOA) or trotterized simulations of Ising Hamiltonians, finding a good initial mapping is a hard problem. We present a SAT-based approach to find good initial mappings for circuits with commuting gates transpiled to the hardware with swap strategies. Our method achieves a 65% reduction in gate count for random three-regular graphs with 500 nodes. In addition, we present a heuristic approach that combines the SAT formulation with a clustering algorithm to reduce large problems to a manageable size. This approach reduces the number of swap layers by 25% compared to both a trivial and random initial mapping for a random three-regular graph with 1000 nodes. Good initial mappings will therefore enable the study of quantum algorithms, such as QAOA and Ising Hamiltonian simulation applied to sparse problems, on noisy quantum hardware with several hundreds of qubits.
Most quantum circuits require SWAP gate insertion to run on quantum hardware with limited qubit connectivity. A promising SWAP gate insertion method for blocks of commuting two-qubit gates is a predetermined swap strategy which applies layers of SWAP gates simultaneously executable on the coupling map. A good initial mapping for the swap strategy reduces the number of required swap gates. However, even when a circuit consists of commuting gates, e.g., as in the Quantum Approximate Optimization Algorithm (QAOA) or trotterized simulations of Ising Hamiltonians, finding a good initial mapping is a hard problem. We present a SAT-based approach to find good initial mappings for circuits with commuting gates transpiled to the hardware with swap strategies. Our method achieves a 65% reduction in gate count for random three-regular graphs with 500 nodes. In addition, we present a heuristic approach that combines the SAT formulation with a clustering algorithm to reduce large problems to a manageable size. This approach reduces the number of swap layers by 25% compared to both a trivial and random initial mapping for a random three-regular graph with 1000 nodes. Good initial mappings will therefore enable the study of quantum algorithms, such as QAOA and Ising Hamiltonian simulation applied to sparse problems, on noisy quantum hardware with several hundreds of qubits.
Combinatorial optimization problems are central to many applications but can be challenging to solve. Quantum approaches such as the Quantum Approximate Optimization Algorithm (QAOA) offer new tools with which to tackle such problems. However, QAOA circuits inherit the interaction structure of the target Hamiltonian, often resulting in deep circuits when compiled onto hardware with limited connectivity. Efficient transpilation is therefore critical to their practical performance. In this work, we propose a transpilation scheme for circuits consisting of blocks of commuting two-qubit gates on two-dimensional lattices. Unlike standard approaches based on random initial mappings and fixed routing, our method alternates between constructing problem-dependent SWAP-layer sequences and updating the qubit layout. By adapting the routing to the required interactions, this yields significantly shorter circuits for graphs with few edges. We benchmark our approach on QAOA instances for Maximum Cut (MC) on Random Regular graphs and Maximum Independent Set (MIS) on Erdős-Rényi graphs. Compared to standard methods, we reduce circuit depth and gate count by about a factor of two, enabling experiments with up to 80 qubits and improving approximation ratios by up to 6.6% for MC and 9.3% for MIS.
Quantum computing has already demonstrated great computational potential across multiple domains and has received more and more attention. However, due to the connectivity limitations of Noisy Intermediate-Scale Quantum (NISQ) devices, most of the quantum algorithms cannot be directly executed without the help of inserting SWAP gates. Nevertheless, more SWAP gates lead to a longer execution time and, inevitably, lower fidelity of the algorithm. To this end, this paper proposes an optimized qubit mapping algorithm based on a dynamic look-ahead strategy to minimize the number of SWAP gates inserted. Firstly, a heuristic algorithm is proposed based on maximizing physical qubit connectivity to generate the optimal initial qubit mapping, which reduces the need for logical qubit shifts during subsequent SWAP gate insertion. Secondly, in the form of directed acyclic graphs, we identify quantum gates that violate the constraints of physical coupling and insert SWAP gates to remap qubits, thereby overcoming the limitations of qubit interactions. Finally, the optimal SWAP gate insertion strategy is built by comparing the cost of different SWAP gate insertion strategies through a multi-window look-ahead strategy to reduce the number of SWAP gates inserted. The experimental results show that the strategy in this paper decreases the number of SWAP gate insertions and significantly reduces the depth of quantum circuits when performing qubit mapping compared with state-of-the-art methods.
The conventional approach for initial qubit mapping in the Noisy Intermediate-Scale Quantum (NISQ) era typically uses a static heuristic strategy, overlooking insufficient qubit neighborhood in subsequent operations, resulting in excess additional SWAP gates. To address this, we introduce a multifactor interaction cost function considering qubit distance, interaction time, and gate operation error rates, enhancing SWAP gate selection in the traditional strategy. Considering quantum hardware constraints, we propose Batch SWAP Optimization Strategy (BSOS). BSOS tackles qubit mapping challenges by leveraging optimal SWAP gate selection and a SWAP-based batch update technique, effectively minimizing SWAP gates throughout circuit execution. Experimental results show that BSOS significantly reduces additional gates by intelligently selecting SWAP gates and using batch updating, with a 38.1% average decrease in inserted SWAP gates, leading to a 12% reduction in hardware gate counting overhead.
The practical use of many types of near-term quantum computers requires accounting for their limited connectivity. One way of overcoming limited connectivity is to insert swaps in the circuit so that logical operations can be performed on physically adjacent qubits, which we refer to as solving the `routing via matchings' problem. We address the routing problem for families of quantum circuits defined by a hypergraph wherein each hyperedge corresponds to a potential gate. Our main result is that any unordered set of k-qubit gates on distinct k-qubit subsets of n logical qubits can be ordered and parallelized in O(nk−1) depth using a linear arrangement of n physical qubits; the construction is completely general and achieves optimal scaling in the case where gates acting on all (kn) sets of k qubits are desired. We highlight two classes of problems for which our method is particularly useful. First, it applies to sets of mutually commuting gates, as in the (diagonal) phase separators of Quantum Alternating Operator Ansatz (Quantum Approximate Optimization Algorithm) circuits. For example, a single level of a QAOA circuit for Maximum Cut can be implemented in linear depth, and a single level for 3-SAT in quadratic depth. Second, it applies to sets of gates that do not commute but for which compilation efficiency is the dominant criterion in their ordering. In particular, it can be adapted to Trotterized time-evolution of fermionic Hamiltonians under the Jordan-Wigner transformation, and also to non-standard mixers in QAOA. Using our method, a single Trotter step of the electronic structure Hamiltonian in an arbitrary basis of n orbitals can be done in O(n3) depth while a Trotter step of the unitary coupled cluster singles and doubles method can be implemented in O(n2η) depth, where η is the number of electrons.
In the era of noisy intermediate-scale quantum (NISQ) computing, the limited connectivity between qubits is one of the common physical limitations faced by current quantum computing devices. Quantum circuit mapping methods transform quantum circuits into equivalent circuits that satisfy physical connectivity constraints by remapping logical qubits, making them executable. The optimization problem of quantum circuit mapping has NP-hard computational complexity, and existing heuristic mapping algorithms still have significant potential for optimization in terms of the number of quantum gates generated. To reduce the number of SWAP gates inserted during mapping, the solution space of the mapping problem is represented as a tree structure, and the mapping process is equivalent to traversing this tree structure. To effectively and efficiently complete the search process, a beam search framework (BSF) is proposed for solving quantum circuit mapping. By iteratively selecting, expanding, and making decisions, high-quality target circuits are generated. Experimental results show that this method can significantly reduce the number of inserted SWAP gates on medium to large circuits, achieving an average reduction of 44% compared to baseline methods, and is applicable to circuits of various sizes and complexities.
Abstract The limited qubit connectivity of quantum processors poses a significant challenge in deploying practical algorithms and logical gates, necessitating efficient qubit mapping and routing strategies. When implementing a gate that requires additional connectivity beyond the native connectivity, the qubit state must be moved to a nearby connected qubit to execute the desired gate locally. This is typically achieved using a series of SWAP gates creating a SWAP path. However, routing methods relying on SWAP gates often lead to increased circuit depth and gate count, motivating the need for alternative approaches. This work explores the potential of teleported gates to improve qubit routing efficiency, focusing on implementation within specific hardware topologies and benchmark quantum algorithms. We propose a routing method that is assisted by gate teleportation. It establishes additional connectivity using gate teleportation paths through available unused qubits, termed auxiliary qubits, within the topology. To optimize this approach, we have developed an algorithm to identify the best gate teleportation connections, considering their potential to reduce the depth of the circuit and address possible errors that may arise from the teleportation paths. Finally, we demonstrate depth reduction with gate teleportation-assisted routing in various benchmark algorithms, including case studies on the compilation of the Deutsch–Jozsa algorithm and the quantum approximation optimization algorithm for heavy-hexagon topology used in IBM 127-qubit Eagle r3 processors. Our benchmark results show a 10%–25% depth reduction in the routing of selected algorithms compared to regular routing without using teleported gates.