Characterizing and mitigating errors in current noisy intermediate-scale devices is important to improve the performance of the next generation of quantum hardware. To investigate the importance of the different noise mechanisms affecting quantum computation, we performed a full quantum process tomography of single qubits in a real quantum processor in which echo experiments are implemented. In addition to the sources of error already included in the standard models, the obtained results show the dominant role of coherent errors, which we practically corrected by inserting random single-qubit unitaries in the quantum circuit, significantly increasing the circuit length over which quantum computations on actual quantum hardware produce reliable results.
Characterizing and mitigating errors in current noisy intermediate-scale devices is important to improve the performance of the next generation of quantum hardware. To investigate the importance of the different noise mechanisms affecting quantum computation, we performed a full quantum process tomography of single qubits in a real quantum processor in which echo experiments are implemented. In addition to the sources of error already included in the standard models, the obtained results show the dominant role of coherent errors, which we practically corrected by inserting random single-qubit unitaries in the quantum circuit, significantly increasing the circuit length over which quantum computations on actual quantum hardware produce reliable results.
Quantum computing is entering a transitional regime between noisy intermediate-scale quantum (NISQ) processing and early fault-tolerant quantum computation (FTQC), in which increasingly capable hardware is beginning to support repeated syndrome measurements, partial error correction, and logical-qubit operations, while residual physical and logical errors remain non-negligible. In this regime, error suppression, error mitigation, and quantum error correction are increasingly better viewed as complementary layers of a unified error-reduction strategy rather than as separate approaches, with each acting at a different stage of the quantum computation to improve simulation reliability. Thus, in this review, we provide a practical and forward-looking overview of the principal hardware error sources and the corresponding error suppression and mitigation methods for reducing their impact across the current NISQ-FTQC transition. We discuss hardware-aware circuit design, coherent-error suppression, readout mitigation, noise extrapolation, classical inference, and software-supported workflows, with particular emphasis on their implementation on actual quantum processors. We further examine how error mitigation techniques can be adapted to encoded and logical-qubit settings so that they can operate alongside quantum error correction to suppress residual logical errors and improve the accuracy of computation in the early fault-tolerant regime.
The successful implementation of algorithms on quantum processors relies on the accurate control of quantum bits (qubits) to perform logic gate operations. In this era of noisy intermediate-scale quantum (NISQ) computing, systematic miscalibrations, drift, and crosstalk in the control of qubits can lead to a coherent form of error that has no classical analog. Coherent errors severely limit the performance of quantum algorithms in an unpredictable manner, and mitigating their impact is necessary for realizing reliable quantum computations. Moreover, the average error rates measured by randomized benchmarking and related protocols are not sensitive to the full impact of coherent errors and therefore do not reliably predict the global performance of quantum algorithms, leaving us unprepared to validate the accuracy of future large-scale quantum computations. Randomized compiling is a protocol designed to overcome these performance limitations by converting coherent errors into stochastic noise, dramatically reducing unpredictable errors in quantum algorithms and enabling accurate predictions of algorithmic performance from error rates measured via cycle benchmarking. In this work, we demonstrate significant performance gains under randomized compiling for the four-qubit quantum Fourier transform algorithm and for random circuits of variable depth on a superconducting quantum processor. Additionally, we accurately predict algorithm performance using experimentally measured error rates. Our results demonstrate that randomized compiling can be utilized to leverage and predict the capabilities of modern-day noisy quantum processors, paving the way forward for scalable quantum computing.
Despite rapid advances in quantum hardware, noise remains a central obstacle to deploying quantum algorithms on near-term devices. In particular, random coherent errors that accumulate during circuit execution constitute a dominant and fundamentally challenging noise source. We introduce a noise-resilient framework for Quantum Signal Processing (QSP) that mitigates such coherent errors without increasing circuit depth or ancillary qubit requirements. Our approach uses ensembles of noisy QSP circuits combined with measurement-level averaging to suppress random phase errors in Z rotations. Building on this framework, we develop robust QSP algorithms for implementing polynomial functions of Hermitian matrices and for estimating observables, with applications to Hamiltonian simulation, quantum linear systems, and ground-state preparation. We analyze the trade-off between approximation error and hardware noise, which is essential for practical implementation under the stringent depth and coherence constraints of current quantum hardware. Our results establish a practical pathway for integrating error mitigation seamlessly into algorithmic design, advancing the development of robust quantum computing, and enabling the discovery of scientific applications with near- and mid-term quantum devices.
The Berkeley gate is a high-performance, two-qubit entangling operation with particular potential for quantum error correction and fault-tolerant protocols. However, harnessing this potential on current noisy intermediate-scale quantum (NISQ) processors, requires efficient compilation and robust performance under realistic noise conditions. In this work, we demonstrate a hardware-efficient implementation of the Berkeley gate on a superconducting quantum processor. Using quantum process tomography (QPT), we experimentally characterize its performance and benchmark it against a noiseless quantum simulator to evaluate its practical reliability in the NISQ era. Experimental measurements confirm the gate's correct logical action, producing the target partially entangled state with a subspace confinement probability of [Formula: see text] on real quantum hardware compared to 100% in quantum simulation. Results from QPT experiments show a simulated process fidelity of [Formula: see text], while the experimental process fidelity on hardware is [Formula: see text]. The observed discrepancy is analyzed in the context of device-specific noise sources, including qubit relaxation, dephasing, and state preparation and measurement (SPAM) errors. Our work provides a concrete fidelity benchmark for the Berkeley gate on superconducting hardware and quantify the impact of realistic noise on a non-trivial two-qubit operation, supporting its use in near-term algorithmic and error-correction applications.
Quantum computing testbeds exhibit high-fidelity quantum control over small collections of qubits, enabling performance of precise, repeatable operations followed by measurements. Currently, these noisy intermediate-scale devices can support a sufficient number of sequential operations prior to decoherence such that near term algorithms can be performed with proximate accuracy (like chemical accuracy for quantum chemistry problems). While the results of these algorithms are imperfect, these imperfections can help bootstrap quantum computer testbed development. Demonstrations of these algorithms over the past few years, coupled with the idea that imperfect algorithm performance can be caused by several dominant noise sources in the quantum processor, which can be measured and calibrated during algorithm execution or in post-processing, has led to the use of noise mitigation to improve typical computational results. Conversely, benchmark algorithms coupled with noise mitigation can help diagnose the nature of the noise, whether systematic or purely random. Here, we outline the use of coherent noise mitigation techniques as a characterization tool in trapped-ion testbeds. We perform model-fitting of the noisy data to determine the noise source based on realistic physics focused noise models and demonstrate that systematic noise amplification coupled with error mitigation schemes provides useful data for noise model deduction. Further, in order to connect lower level noise model details with application specific performance of near term algorithms, we experimentally construct the loss landscape of a variational algorithm under various injected noise sources coupled with error mitigation techniques. This type of connection enables application-aware hardware codesign, in which the most important noise sources in specific applications, like quantum chemistry, become foci of improvement in subsequent hardware generations.
Near-term quantum computers have been built as intermediate-scale quantum devices and are fragile against quantum noise effects, namely, NISQ devices. Traditional quantum-error-correcting codes are not implemented on such devices and to perform quantum computation in good accuracy with these machines we need to develop alternative approaches for mitigating quantum computational errors. In this work, we propose quantum error mitigation (QEM) scheme for quantum computational errors which occur due to couplings with environments during gate operations, i.e., decoherence. To establish our QEM scheme, first we estimate the quantum noise effects on single-qubit states and represent them as groups of quantum circuits, namely, quantum-noise-effect circuit groups. Then our QEM scheme is conducted by subtracting expectation values generated by the quantum-noise-effect circuit groups from those obtained by the quantum circuits for the quantum algorithms under consideration. As a result, the quantum noise effects are reduced, and we obtain approximately the ideal expectation values via the quantum-noise-effect circuit groups and the numbers of elementary quantum circuits composing them scale polynomial with respect to the products of the depths of quantum algorithms and the numbers of register bits. To numerically demonstrate the validity of our QEM scheme, we run noisy quantum simulations of qubits under amplitude damping effects for four types of quantum algorithms. Furthermore, we implement our QEM scheme on IBM Q Experience processors and examine its efficacy. Consequently, the validity of our scheme is verified via both the quantum simulations and the quantum computations on the real quantum devices. Our QEM scheme is solely composed of quantum-computational operations (quantum gates and measurements), and thus, it can be conducted by any type of quantum device. In addition, it can be applied to error mitigation for many other types of quantum noise effects as well as noisy quantum computing of long-depth quantum algorithms.