Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2211.04501

Reducing the qubit requirement of Jordan-Wigner encodings of $N$-mode, $K$-fermion systems from $N$ to $\lceil \log_2 {N \choose K} \rceil$

Brent Harrison, Dylan Nelson, Daniel Adamiak, James Daniel Whitfield

Published Nov 8, 2022• 10 citations
arXivHTMLPDF

Abstract

To simulate a fermionic system on a quantum computer, it is necessary to encode the state of the fermions onto qubits. Fermion-to-qubit mappings such as the Jordan-Wigner and Bravyi-Kitaev transformations do this using $N$ qubits to represent systems of $N$ fermionic modes. In this work, we demonstrate that for particle number conserving systems of $K$ fermions and $N$ modes, the qubit requirement can be reduced to the information theoretic minimum of $\lceil \log_2 {N \choose K} \rceil$. This will improve the feasibility of simulation of molecules and many-body systems on near-term quantum computers with limited qubit number.

DOI
10.48550/arxiv.2211.04501

Related papers

Succinct Fermion Data Structures

Carolan, Joseph, Luke Schaeffer

Simulating fermionic systems on a quantum computer requires representing fermionic states using qubits. The complexity of many simulation algorithms depends on the complexity of implementing rotations generated by fermionic creation-annihilation operators, and the space depends on the number of qubits used. While standard fermion encodings like Jordan-Wigner are space optimal for arbitrary fermionic systems, physical symmetries like particle conservation can reduce the number of physical configurations, allowing improved space complexity. Such space saving is only feasible if the gate overhead is small, suggesting a (quantum) data structures problem, wherein one would like to minimize space used to represent a fermionic state, while still enabling efficient rotations. We define a structure which naturally captures mappings from fermions to systems of qubits. We then instantiate it in two ways, giving rise to two new second-quantized fermion encodings of $F$ fermions in $M$ modes. An information theoretic minimum of $\mathcal{I}:=\lceil\log \binom{M}{F}\rceil$ qubits is required for such systems, a bound we nearly match over the entire parameter regime. (1) Our first construction uses $\mathcal I+o(\mathcal I)$ qubits when $F=o(M)$, and allows rotations generated by creation-annihilation operators in $O(\mathcal I)$ gates and $O(\log M \log \log M)$ depth. (2) Our second construction uses $\mathcal I+O(1)$ qubits when $F=Θ(M)$, and allows rotations generated by creation-annihilation operators in $O(\mathcal I^3)$ gates. In relation to comparable prior work, the first represents a polynomial improvement in both space and gate complexity (against Kirby et al. 2022), and the second represents an exponential improvement in gate complexity at the cost of only a constant number of additional qubits (against Harrison et al. or Shee et al. 2022), in the described parameter regimes.

arXiv:2410.04015•Leibniz international proceedings in informatics•Oct 5, 2024•6 citations

The Bravyi-Kitaev transformation for quantum computation of electronic structure

Jacob T. Seeley, Martin J. Richard, Peter J. Love

Quantum simulation is an important application of future quantum computers with applications in quantum chemistry, condensed matter, and beyond. Quantum simulation of fermionic systems presents a specific challenge. The Jordan-Wigner transformation allows for representation of a fermionic operator by O(n) qubit operations. Here, we develop an alternative method of simulating fermions with qubits, first proposed by Bravyi and Kitaev [Ann. Phys. 298, 210 (2002); e-print arXiv:quant-ph/0003137v2], that reduces the simulation cost to O(log n) qubit operations for one fermionic operation. We apply this new Bravyi-Kitaev transformation to the task of simulating quantum chemical Hamiltonians, and give a detailed example for the simplest possible case of molecular hydrogen in a minimal basis. We show that the quantum circuit for simulating a single Trotter time step of the Bravyi-Kitaev derived Hamiltonian for H(2) requires fewer gate applications than the equivalent circuit derived from the Jordan-Wigner transformation. Since the scaling of the Bravyi-Kitaev method is asymptotically better than the Jordan-Wigner method, this result for molecular hydrogen in a minimal basis demonstrates the superior efficiency of the Bravyi-Kitaev method for all quantum computations of electronic structure.

arXiv:1208.5986•The Journal of Chemical Physics•Dec 12, 2012•652 citations

A Comparison of the Bravyi–Kitaev and Jordan–Wigner Transformations for the Quantum Simulation of Quantum Chemistry

Andrew Tranter, Peter J. Love, Florian Mintert +1 more

The ability to perform classically intractable electronic structure calculations is often cited as one of the principal applications of quantum computing. A great deal of theoretical algorithmic development has been performed in support of this goal. Most techniques require a scheme for mapping electronic states and operations to states of and operations upon qubits. The two most commonly used techniques for this are the Jordan-Wigner transformation and the Bravyi-Kitaev transformation. However, comparisons of these schemes have previously been limited to individual small molecules. In this paper, we discuss resource implications for the use of the Bravyi-Kitaev mapping scheme, specifically with regard to the number of quantum gates required for simulation. We consider both small systems, which may be simulatable on near-future quantum devices, and systems sufficiently large for classical simulation to be intractable. We use 86 molecular systems to demonstrate that the use of the Bravyi-Kitaev transformation is typically at least approximately as efficient as the canonical Jordan-Wigner transformation and results in substantially reduced gate count estimates when performing limited circuit optimizations.

arXiv:1812.02233•Journal of Chemical Theory and Computation•Sep 6, 2018•140 citations

Operator locality in the quantum simulation of fermionic models

Vojtěch Havlíček, Matthias Troyer, James Daniel Whitfield

Simulating fermionic lattice models with qubits requires mapping fermionic degrees of freedom to qubits. The simplest method for this task, the Jordan-Wigner transformation, yields strings of Pauli operators acting on an extensive number of qubits. This overhead can be a hindrance to implementation of qubit-based quantum simulators, especially in the analog context. Here we thus review and analyze alternative fermion-to-qubit mappings, including the two approaches by Bravyi and Kitaev and the auxiliary fermion transformation. The Bravyi-Kitaev transform is reformulated in terms of a classical data structure and generalized to achieve a further locality improvement for local fermionic models on a rectangular lattice. We conclude that the most compact encoding of the fermionic operators can be done using ancilla qubits with the auxiliary fermion scheme. Without introducing ancillas, a variant of the Bravyi-Kitaev transform provides the most compact fermion-to-qubit mapping for Hubbard-like models.

arXiv:1701.07072•Physical Review A•Mar 29, 2017•104 citations

Scalable simulation of fermionic encoding performance on noisy quantum computers

Emiliia Dyrenkova, Raymond Laflamme, Michael Vasmer

A compelling application of quantum computers with thousands of qubits is quantum simulation. Simulating fermionic systems is both a problem with clear real-world applications and a computationally challenging task. In order to simulate a system of fermions on a quantum computer, one has to first map the fermionic Hamiltonian to a qubit Hamiltonian. The most popular such mapping is the Jordan-Wigner encoding, which suffers from inefficiencies caused by the high weight of some encoded operators. As a result, alternative local encodings have been proposed that solve this problem at the expense of a constant factor increase in the number of qubits required. Some such encodings possess local stabilizers, i.e., Pauli operators that act as the logical identity on the encoded fermionic modes. A natural error mitigation approach in these cases is to measure the stabilizers and discard any run where a measurement returns a -1 outcome. Using a high-performance stabilizer simulator, we classically simulate the performance of a local encoding known as the Derby-Klassen encoding and compare its performance with the Jordan-Wigner encoding and the ternary tree encoding. Our simulations use more complex error models and significantly larger system sizes (up to $18\times18$) than in previous work. We find that the high sampling requirements of postselection methods with the Derby-Klassen encoding pose a limitation to its applicability in near-term devices and call for more encoding-specific circuit optimizations.

arXiv:2506.06425•Physical Review A•Dec 12, 2025•6 citations

Qubit-efficient encoding scheme for quantum simulations of electronic structure

Yu Shee, Pei-Kai Tsai, Cheng-Lin Hong +2 more

Simulating electronic structure on a quantum computer requires encoding of fermionic systems onto qubits. Common encoding methods transform a fermionic system of $N$ spin-orbitals into an $N$-qubit system, but many of the fermionic configurations do not respect the required conditions and symmetries of the system so the qubit Hilbert space in this case may have unphysical states and thus cannot be fully utilized. We propose a generalized qubit-efficient encoding (QEE) scheme that requires the qubit number to be only logarithmic in the number of configurations that satisfy the required conditions and symmetries. For the case of considering only the particle-conserving and singlet configurations, we reduce the qubit count to an upper bound of $\mathcal{O}(m{log}_{2}N)$, where $m$ is the number of particles. This QEE scheme is demonstrated on an ${\mathrm{H}}_{2}$ molecule in the 6-31G basis set and a $\mathrm{LiH}$ molecule in the STO-3G basis set using fewer qubits than the common encoding methods. We calculate the ground-state energy surfaces using a variational quantum eigensolver algorithm with a hardware-efficient ansatz circuit. We choose to use a hardware-efficient ansatz since most of the Hilbert space in our scheme is spanned by desired configurations so a heuristic search for an eigenstate is sensible. The simulations are performed on IBM Quantum machines and the Qiskit simulator with a noise model implemented from a IBM Quantum machine. Using the methods of measurement error mitigation and error-free linear extrapolation, we demonstrate that most of the distributions of the extrapolated energies using our QEE scheme agree with the exact results obtained by Hamiltonian diagonalization in the given basis sets within chemical accuracy. Our proposed scheme and results show the feasibility of quantum simulations for larger molecular systems in the noisy intermediate-scale quantum (NISQ) era. The number of terms in the Hamiltonian has an upper bound of $\mathcal{O}(\frac{{N}^{2m+1}}{(m\ensuremath{-}1)!\phantom{\rule{0.16em}{0ex}}m!})$ for the QEE scheme while it scales as $\mathcal{O}({N}^{4})$ for the Jordan-Wigner encoding scheme. Nevertheless, we present several cases where QEE is useful.

arXiv:2110.04112•Physical Review Research•May 27, 2022•53 citations
Reducing the qubit requirement of Jordan-Wigner encodings of NNN-mode, KKK-fermion systems from NNN to ⌈log⁡2(NK)⌉\lceil \log_2 {N \choose K} \rceil⌈log2​(KN​)⌉
To simulate a fermionic system on a quantum computer, it is necessary to encode the state of the fermions onto qubits. Fermion-to-qubit mappings such as the Jordan-Wigner and Bravyi-Kitaev transformations do this using NNN qubits to represent systems of NNN fermionic modes. In this work, we demonstrate that for particle number conserving systems of KKK fermions and NNN modes, the qubit requirement can be reduced to the information theoretic minimum of ⌈log⁡2(NK)⌉\lceil \log_2 {N \choose K} \rceil⌈log2​(KN​)⌉. This will improve the feasibility of simulation of molecules and many-body systems on near-term quantum computers with limited qubit number.
Simulating fermionic systems on a quantum computer requires representing fermionic states using qubits. The complexity of many simulation algorithms depends on the complexity of implementing rotations generated by fermionic creation-annihilation operators, and the space depends on the number of qubits used. While standard fermion encodings like Jordan-Wigner are space optimal for arbitrary fermionic systems, physical symmetries like particle conservation can reduce the number of physical configurations, allowing improved space complexity. Such space saving is only feasible if the gate overhead is small, suggesting a (quantum) data structures problem, wherein one would like to minimize space used to represent a fermionic state, while still enabling efficient rotations. We define a structure which naturally captures mappings from fermions to systems of qubits. We then instantiate it in two ways, giving rise to two new second-quantized fermion encodings of FFF fermions in MMM modes. An information theoretic minimum of I:=⌈log⁡(MF)⌉\mathcal{I}:=\lceil\log \binom{M}{F}\rceilI:=⌈log(FM​)⌉ qubits is required for such systems, a bound we nearly match over the entire parameter regime. (1) Our first construction uses I+o(I)\mathcal I+o(\mathcal I)I+o(I) qubits when F=o(M)F=o(M)F=o(M), and allows rotations generated by creation-annihilation operators in O(I)O(\mathcal I)O(I) gates and O(log⁡Mlog⁡log⁡M)O(\log M \log \log M)O(logMloglogM) depth. (2) Our second construction uses I+O(1)\mathcal I+O(1)I+O(1) qubits when F=Θ(M)F=Θ(M)F=Θ(M), and allows rotations generated by creation-annihilation operators in O(I3)O(\mathcal I^3)O(I3) gates. In relation to comparable prior work, the first represents a polynomial improvement in both space and gate complexity (against Kirby et al. 2022), and the second represents an exponential improvement in gate complexity at the cost of only a constant number of additional qubits (against Harrison et al. or Shee et al. 2022), in the described parameter regimes.
Quantum simulation is an important application of future quantum computers with applications in quantum chemistry, condensed matter, and beyond. Quantum simulation of fermionic systems presents a specific challenge. The Jordan-Wigner transformation allows for representation of a fermionic operator by O(n) qubit operations. Here, we develop an alternative method of simulating fermions with qubits, first proposed by Bravyi and Kitaev [Ann. Phys. 298, 210 (2002); e-print arXiv:quant-ph/0003137v2], that reduces the simulation cost to O(log n) qubit operations for one fermionic operation. We apply this new Bravyi-Kitaev transformation to the task of simulating quantum chemical Hamiltonians, and give a detailed example for the simplest possible case of molecular hydrogen in a minimal basis. We show that the quantum circuit for simulating a single Trotter time step of the Bravyi-Kitaev derived Hamiltonian for H(2) requires fewer gate applications than the equivalent circuit derived from the Jordan-Wigner transformation. Since the scaling of the Bravyi-Kitaev method is asymptotically better than the Jordan-Wigner method, this result for molecular hydrogen in a minimal basis demonstrates the superior efficiency of the Bravyi-Kitaev method for all quantum computations of electronic structure.
The ability to perform classically intractable electronic structure calculations is often cited as one of the principal applications of quantum computing. A great deal of theoretical algorithmic development has been performed in support of this goal. Most techniques require a scheme for mapping electronic states and operations to states of and operations upon qubits. The two most commonly used techniques for this are the Jordan-Wigner transformation and the Bravyi-Kitaev transformation. However, comparisons of these schemes have previously been limited to individual small molecules. In this paper, we discuss resource implications for the use of the Bravyi-Kitaev mapping scheme, specifically with regard to the number of quantum gates required for simulation. We consider both small systems, which may be simulatable on near-future quantum devices, and systems sufficiently large for classical simulation to be intractable. We use 86 molecular systems to demonstrate that the use of the Bravyi-Kitaev transformation is typically at least approximately as efficient as the canonical Jordan-Wigner transformation and results in substantially reduced gate count estimates when performing limited circuit optimizations.
Simulating fermionic lattice models with qubits requires mapping fermionic degrees of freedom to qubits. The simplest method for this task, the Jordan-Wigner transformation, yields strings of Pauli operators acting on an extensive number of qubits. This overhead can be a hindrance to implementation of qubit-based quantum simulators, especially in the analog context. Here we thus review and analyze alternative fermion-to-qubit mappings, including the two approaches by Bravyi and Kitaev and the auxiliary fermion transformation. The Bravyi-Kitaev transform is reformulated in terms of a classical data structure and generalized to achieve a further locality improvement for local fermionic models on a rectangular lattice. We conclude that the most compact encoding of the fermionic operators can be done using ancilla qubits with the auxiliary fermion scheme. Without introducing ancillas, a variant of the Bravyi-Kitaev transform provides the most compact fermion-to-qubit mapping for Hubbard-like models.
A compelling application of quantum computers with thousands of qubits is quantum simulation. Simulating fermionic systems is both a problem with clear real-world applications and a computationally challenging task. In order to simulate a system of fermions on a quantum computer, one has to first map the fermionic Hamiltonian to a qubit Hamiltonian. The most popular such mapping is the Jordan-Wigner encoding, which suffers from inefficiencies caused by the high weight of some encoded operators. As a result, alternative local encodings have been proposed that solve this problem at the expense of a constant factor increase in the number of qubits required. Some such encodings possess local stabilizers, i.e., Pauli operators that act as the logical identity on the encoded fermionic modes. A natural error mitigation approach in these cases is to measure the stabilizers and discard any run where a measurement returns a -1 outcome. Using a high-performance stabilizer simulator, we classically simulate the performance of a local encoding known as the Derby-Klassen encoding and compare its performance with the Jordan-Wigner encoding and the ternary tree encoding. Our simulations use more complex error models and significantly larger system sizes (up to 18×1818\times1818×18) than in previous work. We find that the high sampling requirements of postselection methods with the Derby-Klassen encoding pose a limitation to its applicability in near-term devices and call for more encoding-specific circuit optimizations.
Simulating electronic structure on a quantum computer requires encoding of fermionic systems onto qubits. Common encoding methods transform a fermionic system of NNN spin-orbitals into an NNN-qubit system, but many of the fermionic configurations do not respect the required conditions and symmetries of the system so the qubit Hilbert space in this case may have unphysical states and thus cannot be fully utilized. We propose a generalized qubit-efficient encoding (QEE) scheme that requires the qubit number to be only logarithmic in the number of configurations that satisfy the required conditions and symmetries. For the case of considering only the particle-conserving and singlet configurations, we reduce the qubit count to an upper bound of O(mlog2N)\mathcal{O}(m{log}_{2}N)O(mlog2​N), where mmm is the number of particles. This QEE scheme is demonstrated on an H2{\mathrm{H}}_{2}H2​ molecule in the 6-31G basis set and a LiH\mathrm{LiH}LiH molecule in the STO-3G basis set using fewer qubits than the common encoding methods. We calculate the ground-state energy surfaces using a variational quantum eigensolver algorithm with a hardware-efficient ansatz circuit. We choose to use a hardware-efficient ansatz since most of the Hilbert space in our scheme is spanned by desired configurations so a heuristic search for an eigenstate is sensible. The simulations are performed on IBM Quantum machines and the Qiskit simulator with a noise model implemented from a IBM Quantum machine. Using the methods of measurement error mitigation and error-free linear extrapolation, we demonstrate that most of the distributions of the extrapolated energies using our QEE scheme agree with the exact results obtained by Hamiltonian diagonalization in the given basis sets within chemical accuracy. Our proposed scheme and results show the feasibility of quantum simulations for larger molecular systems in the noisy intermediate-scale quantum (NISQ) era. The number of terms in the Hamiltonian has an upper bound of $\mathcal{O}(\frac{{N}^{2m+1}}{(m\ensuremath{-}1)!\phantom{\rule{0.16em}{0ex}}m!})$ for the QEE scheme while it scales as O(N4)\mathcal{O}({N}^{4})O(N4) for the Jordan-Wigner encoding scheme. Nevertheless, we present several cases where QEE is useful.