Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2210.04566 · Physical Review A

Design of a tabletop interferometer with quantum amplification

J. Smetana, Artemiy V. Dmitriev, Chunnong Zhao, Haixing Miao, Д. В. Мартынов

Published Apr 3, 2023• 1 citation
arXivHTMLPDF

Abstract

The sensitivity of laser interferometers is fundamentally limited by the quantum nature of light. Recent theoretical studies have opened a new avenue to enhance their quantum-limited sensitivity by using active parity-time-symmetric and phase-insensitive quantum amplification. These systems can enhance the signal response without introducing excess noise in the ideal case. However, such active systems must be causal, stable, and carefully tuned to be practical and applicable to precision measurements. In this paper, we show that phase-insensitive amplification in laser interferometers can be implemented in a tabletop experiment. The layout consists of two coupled cavities and an active medium comprised of a silicon nitride membrane and an auxiliary pump field. Our design relies on existing membrane and cryogenic technology and can demonstrate three distinct features: (i) the self-stabilized dynamics of the optical system, (ii) quantum enhancement of its sensitivity in the presence of the amplifier, and (iii) optical control of the amplifier gain. These features are needed to enhance the sensitivity of future interferometric gravitational-wave and axion detectors.

DOI
10.1103/physreva.107.043701

Related papers

Enhancing the sensitivity of interferometers with stable phase-insensitive quantum filters

Artemiy V. Dmitriev, Haixing Miao, Д. В. Мартынов

We present a new quantum control strategy for increasing the shot-noise-limited sensitivity of optical interferometers. The strategy utilizes active phase-insensitive quantum filtering of the signal inside the interferometer and does not rely on optical squeezing. On the example of the coupled-cavity resonators, employed in the gravitational-wave detectors, we show that fully causal and stable phase-insensitive filters can improve the interferometer sensitivity by more than an order of magnitude. The role of the phase-insensitive component in such systems is to provide frequency-dependent compensation for the unwanted dispersion introduced by the position-sensing optical cavity. The system's stability is achieved by limiting the frequency band of this compensation. We demonstrate that stable optomechanical Parity-time-symmetric (PT-symmetric) filters comprise a special subclass of such phase-insensitive devices and find entirely new solutions which overcome the sensitivity of PT-symmetric filters. This scheme is robust against optical loss at the output of the detectors and in the cavities.

arXiv:2110.15354•Physical review. D/Physical review. D.•Jul 26, 2022•8 citations

A table-top optical interferometer with shot-noise sensitivity enhanced by optomechanical phase-insensitive quantum filtering

Artemiy V. Dmitriev, Haixing Miao, J. Smetana +1 more

We present a new scheme to enhance the quantum-limited bandwidth-sensitivity product of table-top position-sensitive interferometers. It is based on a recently proposed stable optomechanical PT-symmetric sensitivity enhancement technique. We extend this technique to tabletop-scaled systems by using the membrane-in-the-middle approach. We show that the sensitivity can be enhanced in a wide frequency range by using a silicon nitride membrane as the optomechanical component. We discuss the main experimental challenges, present the results of our experimental work on a proof-of-principle room-temperature demonstration of the effect and stability, and discuss the future upgrade of our setup for a fully quantum demonstration.

Optical and Quantum Sensing and Precision Metrology II•Mar 8, 2023•0 citations

Phase-sensitive optomechanical amplifier for quantum noise reduction in laser interferometers

Yuntao Bai, G. Venugopalan, Kevin A. Kuns +5 more

The sensitivity of future gravitational wave interferometers is expected to be limited throughout the detection band by quantum vacuum fluctuations, which can be reduced by applying quantum optics techniques such as squeezed vacuum injection. However, decoherence caused by optical losses in the readout chain will severely limit the effectiveness of such schemes. It was proposed that effect of losses in the final stage of detection can be mitigated by a phase-sensitive amplifier placed in between the output port of the interferometer and the photodetector. In this paper we propose to implement such amplification using an optomechanical device, study some of its practical limitations, and discuss its applicability to next-generation gravitational-wave detectors.

arXiv:1909.02264•Physical Review A•Aug 5, 2020•9 citations

Amplification of 2um squeezed light

Kar Meng Kwan

Squeezed states of light enable the reduction of quantum noise in precision interferometric measurements and are routinely employed in gravitational-wave detectors. Future gravitational-wave detector upgrades based on cryogenic silicon optics are expected to operate at longer wavelengths near 1984nm, to take advantage of reduced coating thermal noise and substrate absorption. However, at these wavelengths, the observable squeezing is severely limited by optical loss, in particular the reduced quantum efficiency of available photodiodes. This thesis presents the development and experimental demonstration of a loss-tolerant detection scheme for squeezed states at 1984nm. A phase-sensitive optical parametric amplifier is implemented as a pre-amplifier, amplifying the squeezed quadrature prior to photodetection. A theoretical framework is developed to describe the generation, amplification, and detection of squeezed states in the presence of optical loss and phase noise, introducing the concept of effective detection efficiency for amplified readout. The model predicts that phase-sensitive amplification can mitigate detection loss without significantly degrading the quantum correlations of the squeezed state. Experimentally, a squeezed-light source operating at 1984nm is employed, consisting of second-harmonic generation for pump production and an optical parametric oscillator for squeezed vacuum generation. A phase-controlled optical parametric amplifier is added to the squeezed light output for amplified readout. The individual subsystems are characterized in terms of cavity parameters, escape efficiency, nonlinear gain, and control-loop performance. Amplified squeezing is demonstrated with substantially improved effective detection efficiency compared to conventional homodyne readout, despite the limited photodiode quantum efficiency. The technique also enhances noise clearance above the electronic noise floor, extending the usable measurement bandwidth. These results establish phase-sensitive amplification as a practical strategy for overcoming detection loss at long wavelengths and demonstrate its relevance for next-generation gravitational-wave detectors designed for the 2um regime.

•Jan 1, 2026•0 citations

Enhancement of the phase-measurement sensitivity beyond the standard quantum limit by a nonlinear interferometer

Z. Y. Ou

A nonlinear interferometer uses nonlinear elements as beam splitters to split and to recombine optical waves for interference. As a result, the interference fringe size has a nonlinear dependence on the intensity of the field for phase sensing and leads to an enhanced phase signal. In this paper, a practical scheme of nonlinear interferometry for precision phase measurement is analyzed with parametric amplifiers as the nonlinear beam splitters. It is found that the signal due to phase shift is enhanced by a factor of the amplification gain as compared to a linear interferometer with the same phase-sensing light intensity while the quantum noise is kept at the vacuum level, thus, effectively increasing the signal-to-noise ratio (SNR) beyond the standard quantum limit. Furthermore, the scheme is not as sensitive to the detection loss as the linear scheme with a squeezed state for noise reduction. However, losses inside the interferometer limit the enhancement factor in SNR. We apply the concept to a Michelson interferometer but with parametric amplifiers involved for gravitational-wave detection. We find that effective power is increased by the gain of the amplifiers without actually increasing the cycling power inside the interferometer. Furthermore, the full benefits with squeezed input and variational output or the combination of a quantum nondemolition interferometer for sensitivity beyond the standard quantum limit apply here with even better results. Such a nonlinear interferometer will find wide applications in precision measurements.

Physical Review A•Feb 14, 2012•191 citations

Enhanced on-chip phase measurement by inverse weak value amplification

Meiting Song, John Steinmetz, Yi Zhang +4 more

Optical interferometry plays an essential role in precision metrology such as in gravitational wave detection, gyroscopes, and environmental sensing. Weak value amplification enables reaching the shot-noise-limit of sensitivity, which is difficult for most optical sensors, by amplifying the interferometric signal without amplifying certain technical noises. We implement a generalized form of weak value amplification on an integrated photonic platform with a multi-mode interferometer. Our results pave the way for a more sensitive, robust, and compact platform for measuring phase, which can be adapted to fields such as coherent communications and the quantum domain. In this work, we show a 7 dB signal enhancement in our weak value device over a standard Mach-Zehnder interferometer with equal detected optical power, as well as frequency measurements with 2 kHz sensitivity by adding a ring resonator.

Nature Communications•Oct 29, 2021•32 citations
The sensitivity of laser interferometers is fundamentally limited by the quantum nature of light. Recent theoretical studies have opened a new avenue to enhance their quantum-limited sensitivity by using active parity-time-symmetric and phase-insensitive quantum amplification. These systems can enhance the signal response without introducing excess noise in the ideal case. However, such active systems must be causal, stable, and carefully tuned to be practical and applicable to precision measurements. In this paper, we show that phase-insensitive amplification in laser interferometers can be implemented in a tabletop experiment. The layout consists of two coupled cavities and an active medium comprised of a silicon nitride membrane and an auxiliary pump field. Our design relies on existing membrane and cryogenic technology and can demonstrate three distinct features: (i) the self-stabilized dynamics of the optical system, (ii) quantum enhancement of its sensitivity in the presence of the amplifier, and (iii) optical control of the amplifier gain. These features are needed to enhance the sensitivity of future interferometric gravitational-wave and axion detectors.
We present a new quantum control strategy for increasing the shot-noise-limited sensitivity of optical interferometers. The strategy utilizes active phase-insensitive quantum filtering of the signal inside the interferometer and does not rely on optical squeezing. On the example of the coupled-cavity resonators, employed in the gravitational-wave detectors, we show that fully causal and stable phase-insensitive filters can improve the interferometer sensitivity by more than an order of magnitude. The role of the phase-insensitive component in such systems is to provide frequency-dependent compensation for the unwanted dispersion introduced by the position-sensing optical cavity. The system's stability is achieved by limiting the frequency band of this compensation. We demonstrate that stable optomechanical Parity-time-symmetric (PT-symmetric) filters comprise a special subclass of such phase-insensitive devices and find entirely new solutions which overcome the sensitivity of PT-symmetric filters. This scheme is robust against optical loss at the output of the detectors and in the cavities.
We present a new scheme to enhance the quantum-limited bandwidth-sensitivity product of table-top position-sensitive interferometers. It is based on a recently proposed stable optomechanical PT-symmetric sensitivity enhancement technique. We extend this technique to tabletop-scaled systems by using the membrane-in-the-middle approach. We show that the sensitivity can be enhanced in a wide frequency range by using a silicon nitride membrane as the optomechanical component. We discuss the main experimental challenges, present the results of our experimental work on a proof-of-principle room-temperature demonstration of the effect and stability, and discuss the future upgrade of our setup for a fully quantum demonstration.
The sensitivity of future gravitational wave interferometers is expected to be limited throughout the detection band by quantum vacuum fluctuations, which can be reduced by applying quantum optics techniques such as squeezed vacuum injection. However, decoherence caused by optical losses in the readout chain will severely limit the effectiveness of such schemes. It was proposed that effect of losses in the final stage of detection can be mitigated by a phase-sensitive amplifier placed in between the output port of the interferometer and the photodetector. In this paper we propose to implement such amplification using an optomechanical device, study some of its practical limitations, and discuss its applicability to next-generation gravitational-wave detectors.
Squeezed states of light enable the reduction of quantum noise in precision interferometric measurements and are routinely employed in gravitational-wave detectors. Future gravitational-wave detector upgrades based on cryogenic silicon optics are expected to operate at longer wavelengths near 1984nm, to take advantage of reduced coating thermal noise and substrate absorption. However, at these wavelengths, the observable squeezing is severely limited by optical loss, in particular the reduced quantum efficiency of available photodiodes. This thesis presents the development and experimental demonstration of a loss-tolerant detection scheme for squeezed states at 1984nm. A phase-sensitive optical parametric amplifier is implemented as a pre-amplifier, amplifying the squeezed quadrature prior to photodetection. A theoretical framework is developed to describe the generation, amplification, and detection of squeezed states in the presence of optical loss and phase noise, introducing the concept of effective detection efficiency for amplified readout. The model predicts that phase-sensitive amplification can mitigate detection loss without significantly degrading the quantum correlations of the squeezed state. Experimentally, a squeezed-light source operating at 1984nm is employed, consisting of second-harmonic generation for pump production and an optical parametric oscillator for squeezed vacuum generation. A phase-controlled optical parametric amplifier is added to the squeezed light output for amplified readout. The individual subsystems are characterized in terms of cavity parameters, escape efficiency, nonlinear gain, and control-loop performance. Amplified squeezing is demonstrated with substantially improved effective detection efficiency compared to conventional homodyne readout, despite the limited photodiode quantum efficiency. The technique also enhances noise clearance above the electronic noise floor, extending the usable measurement bandwidth. These results establish phase-sensitive amplification as a practical strategy for overcoming detection loss at long wavelengths and demonstrate its relevance for next-generation gravitational-wave detectors designed for the 2um regime.
A nonlinear interferometer uses nonlinear elements as beam splitters to split and to recombine optical waves for interference. As a result, the interference fringe size has a nonlinear dependence on the intensity of the field for phase sensing and leads to an enhanced phase signal. In this paper, a practical scheme of nonlinear interferometry for precision phase measurement is analyzed with parametric amplifiers as the nonlinear beam splitters. It is found that the signal due to phase shift is enhanced by a factor of the amplification gain as compared to a linear interferometer with the same phase-sensing light intensity while the quantum noise is kept at the vacuum level, thus, effectively increasing the signal-to-noise ratio (SNR) beyond the standard quantum limit. Furthermore, the scheme is not as sensitive to the detection loss as the linear scheme with a squeezed state for noise reduction. However, losses inside the interferometer limit the enhancement factor in SNR. We apply the concept to a Michelson interferometer but with parametric amplifiers involved for gravitational-wave detection. We find that effective power is increased by the gain of the amplifiers without actually increasing the cycling power inside the interferometer. Furthermore, the full benefits with squeezed input and variational output or the combination of a quantum nondemolition interferometer for sensitivity beyond the standard quantum limit apply here with even better results. Such a nonlinear interferometer will find wide applications in precision measurements.
Optical interferometry plays an essential role in precision metrology such as in gravitational wave detection, gyroscopes, and environmental sensing. Weak value amplification enables reaching the shot-noise-limit of sensitivity, which is difficult for most optical sensors, by amplifying the interferometric signal without amplifying certain technical noises. We implement a generalized form of weak value amplification on an integrated photonic platform with a multi-mode interferometer. Our results pave the way for a more sensitive, robust, and compact platform for measuring phase, which can be adapted to fields such as coherent communications and the quantum domain. In this work, we show a 7 dB signal enhancement in our weak value device over a standard Mach-Zehnder interferometer with equal detected optical power, as well as frequency measurements with 2 kHz sensitivity by adding a ring resonator.