Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2209.08998 · Applied Physics Letters

The influence of magnetic vortices motion on the inverse ac Josephson effect in asymmetric arrays

Boris Chesca, Marat B Gaifullin, Daniel John, Jonathan Cox, Sergey E. Savel'ev, Christopher J. Mellor

Published Oct 17, 2022• 1 citation
arXivHTMLPDF

Abstract

We report on the influence a preferential magnetic vortices motion has on the magnitude of the inverse ac Josephson effect (the appearance of dc current Shapiro steps) and the coherent operation of asymmetrical parallel arrays of YBa2Cu3O7−δ Josephson junctions (JJ) irradiated with microwave (MW) radiation in the presence of an applied magnetic field B. The preferential direction of motion of the Josephson vortices is due to the asymmetry-induced ratchet effect and has a dramatic impact: for a particular positive dc bias current I when the flux-flow is robust multiple pronounced Shapiro-steps are observed consistent with a coherent operation of the array. This suggests an efficient emission/detection of MW in related applications. In contrast, when we reverse the direction of I, the flux-flow is reduced and the Shapiro steps are strongly suppressed due to a highly incoherent operation that suggests an inefficient emission/detection of MW. Remarkably, by changing B slightly, the situation is reversed: Shapiro steps are now suppressed for a positive I while well pronounced for a reverse current −I. Our results suggest that a preferential vortex-flow has a very significant impact on the coherent MW operation of superconducting devices consisting of either multiple JJs or an asymmetrically biased single long JJ. This is particularly relevant in the case of flux-flow oscillators for sub-terahertz integrated-receivers, flux-driven Josephson (travelling-wave) parametric amplifiers, or on-chip superconducting MW generators, which usually operate at bias currents in the Shapiro step region.

DOI
10.1063/5.0121779

Related papers

Microwave-Induced Vortex Motion in Long Josephson Junctions

Katsuyoshi Hamasaki, Keiji Yoshida, Fujio Irie +2 more

Experimental and theoretical studies are made of the effect of a microwave on dc current-voltage characteristics of long Josephson junctions. In the case of zero external dc current, dc voltages were observed when the microwave was applied to the junctions. By comparing the observed magnetic-field and microwave-power dependences with theoretical results, it is concluded that these dc voltages resulted from vortex motion which was induced by the applied microwave. When the junctions were in a flux-flow state caused by the external current, a good agreement between theory and experiment concerning the microwave-power and magnetic-field dependences of Shapiro steps demonstrates that an almost ideal traveling-wave type coupling between the applied microwave and a moving vortex array took place in the long Josephson junctions.

Japanese Journal of Applied Physics•Jan 1, 1980•7 citations

Magnetic flux quantum periodicity of the frequency of the on-chip detectable electromagnetic radiation from superconducting flux-flow-oscillators

Boris Chesca, Daniel John, Marat B Gaifullin +4 more

Superconducting flux-flow-oscillators (FFOs) based on unidirectional flow of magnetic vortices in a single-long Josephson junction (JJ) and operating at 4.2 K are key elements of sub-terahertz integrated-receivers used in radio-astronomy and atmospheric science. Here, we report on the development of sub-terahertz FFOs based on parallel JJ-arrays made of YBa2Cu3O7−δ thin films. Sharp multiple flux-flow resonances were observed in the temperature range 77–89 K in asymmetric JJ-arrays, suggesting that they can operate as a narrow-band FFO in sub-terahertz integrated-receivers at more practical temperatures than 4.2 K. We detected electromagnetic radiation (EM) emitted by symmetric JJ-arrays in the range of 30–45 K using on-chip build superconducting detectors based on single JJs. For both asymmetric and symmetric JJ-arrays, the frequency f of the emitted radiation could be tuned continuously by an applied magnetic flux Φ with a one-flux-quantum Φ0 periodicity. Remarkably, since f can be tuned continuously, there are no gaps in the frequency range of the emitted EM. The fundamental Φ0-periodicity of f(Φ) is similar in nature to a SQUID's voltage response V(Φ) and, consequently, using high-performance magnetic flux-to-field conversion and readout techniques, a sensitive field-to-frequency magnetometer can be developed. Incorporated into non-accessible micro/nanostructures as a magnetic sensor, it would allow precise measurements of magnetic-fields from a distance, without the need to measure it locally as the radiation is detected remotely.

Applied Physics Letters•Oct 5, 2020•6 citations

Model analysis for a current-step-like structure in a high Tc Josephson device coupled to a microwave signal

Yoshinao Mizugaki, Jian Chen

High Tc Josephson junctions have IcRn products as large as a few mV at liquid helium temperature, and hence, the frequency normalized by IcRn∕Φ0 becomes on the order of 10−3 for a gigahertz (GHz) microwave signal. (Here, Ic, Rn, and Φ0 are the critical current, the normal resistance, and a flux quantum, respectively.) It is well known that a microwave-current-driven Josephson junction does not exhibit clear Shapiro steps under such low frequency conditions. Instead of Shapiro steps, however, we often observe a current-step-like structure in the current–voltage curve of YBa2Cu3O7−δ grain boundary Josephson junctions coupled to a GHz signal. In this article, we present a model analysis for such current-step-like structures. Two types of device models are employed: a simple resistively and capacitively shunted junction model and a rf-field-driven two-junction superconducting quantum interference device model. Numerical results of the latter model agree with the experimental results, which indicates that the envelope of small Shapiro steps, including the effects of microwave-induced motion of flux quanta, appears as a current-step-like structure in a high Tc Josephson device coupled to a GHz microwave.

Journal of Applied Physics•Mar 8, 2005•3 citations

Microwave coupling of the Josephson junction arrays with an external source

Insang Song, Yunsung Huh, Gwangseo Park +4 more

We have fabricated a YBa/sub 2/Cu/sub 3/O/sub y/ (YBCO) array of five Josephson junctions designed with additional inductive coupling lines (AICLs). The junctions in this array were dc-biased in parallel to oscillate coherently in-phase and integrated with AICLs to improve the impedance matching between this array and external circuits such as a waveguide. The effect of AICLs was investigated by studying its influence on the current-voltage characteristics of the Josephson junction array (JJA) under external microwave irradiations with frequency of 22 GHz. The experimental results show that the behavior of the Shapiro-steps depends upon the effective inductance of AICLs which affects the total impedance and microwave coupling. We were able to obtain an oscillation frequency of about 73% of the maximum available frequency calculated from the characteristic voltage of the Josephson junctions in the array at a temperature of 12 K. By calculating the total impedance of the array, we obtained the suitable parameters of the array for microwave coupling with waveguide for various values of inductance, ac frequencies and number of Josephson junctions.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•7 citations

Submillimeter wave response of a high T c superconducting microbridge

Jun-ichi Takeya, Etsuo Kawate, Chan Hoon Park +1 more

We observed the ac Josephson effect, the ‘‘Shapiro step,’’ at the high frequency of 584 GHz in an YBa2Cu3O7−δ grain boundary Josephson junction at 4.2 K for the first time. This Shapiro step grew to about 8% of the critical current without irradiation. We also noted that the critical current was gradually suppressed with increasing power. The critical current with irradiation was suppressed to about 97% of the critical current without irradiation. Detailed investigation revealed the consistency between the above two phenomena.

Applied Physics Letters•Nov 23, 1992•6 citations

Physics of High-T, Josephson Junctions and SQUIDs

H. C. Yang, Jiazhen Lu, J. D. Lee +3 more

Effects of magnetic fields and microwave radiation on I-V characteristics of YBa2Cu3Oy high-T, Josephson junctions, SQUIDS and Josephson arrays were reported in this experiment, with special emphasis focused on the effects of microwave radiation. In addition to the ordinary constant-voltage steps resulting from the ac Josephson effect, noninteger constant voltage steps are occasionally observed under microwave radiation. We attribute these noninteger constant-voltage steps to the flux coupled to junctions or SQUIDS. Resistive SQUIDS disclose V-Φmodulation without a biased current. The peak to peak value AV of a V-Φ curve is enhanced by microwave radiation.

Chinese Journal of Physics•Apr 1, 1996•0 citations
We report on the influence a preferential magnetic vortices motion has on the magnitude of the inverse ac Josephson effect (the appearance of dc current Shapiro steps) and the coherent operation of asymmetrical parallel arrays of YBa2Cu3O7−δ Josephson junctions (JJ) irradiated with microwave (MW) radiation in the presence of an applied magnetic field B. The preferential direction of motion of the Josephson vortices is due to the asymmetry-induced ratchet effect and has a dramatic impact: for a particular positive dc bias current I when the flux-flow is robust multiple pronounced Shapiro-steps are observed consistent with a coherent operation of the array. This suggests an efficient emission/detection of MW in related applications. In contrast, when we reverse the direction of I, the flux-flow is reduced and the Shapiro steps are strongly suppressed due to a highly incoherent operation that suggests an inefficient emission/detection of MW. Remarkably, by changing B slightly, the situation is reversed: Shapiro steps are now suppressed for a positive I while well pronounced for a reverse current −I. Our results suggest that a preferential vortex-flow has a very significant impact on the coherent MW operation of superconducting devices consisting of either multiple JJs or an asymmetrically biased single long JJ. This is particularly relevant in the case of flux-flow oscillators for sub-terahertz integrated-receivers, flux-driven Josephson (travelling-wave) parametric amplifiers, or on-chip superconducting MW generators, which usually operate at bias currents in the Shapiro step region.
Experimental and theoretical studies are made of the effect of a microwave on dc current-voltage characteristics of long Josephson junctions. In the case of zero external dc current, dc voltages were observed when the microwave was applied to the junctions. By comparing the observed magnetic-field and microwave-power dependences with theoretical results, it is concluded that these dc voltages resulted from vortex motion which was induced by the applied microwave. When the junctions were in a flux-flow state caused by the external current, a good agreement between theory and experiment concerning the microwave-power and magnetic-field dependences of Shapiro steps demonstrates that an almost ideal traveling-wave type coupling between the applied microwave and a moving vortex array took place in the long Josephson junctions.
Superconducting flux-flow-oscillators (FFOs) based on unidirectional flow of magnetic vortices in a single-long Josephson junction (JJ) and operating at 4.2 K are key elements of sub-terahertz integrated-receivers used in radio-astronomy and atmospheric science. Here, we report on the development of sub-terahertz FFOs based on parallel JJ-arrays made of YBa2Cu3O7−δ thin films. Sharp multiple flux-flow resonances were observed in the temperature range 77–89 K in asymmetric JJ-arrays, suggesting that they can operate as a narrow-band FFO in sub-terahertz integrated-receivers at more practical temperatures than 4.2 K. We detected electromagnetic radiation (EM) emitted by symmetric JJ-arrays in the range of 30–45 K using on-chip build superconducting detectors based on single JJs. For both asymmetric and symmetric JJ-arrays, the frequency f of the emitted radiation could be tuned continuously by an applied magnetic flux Φ with a one-flux-quantum Φ0 periodicity. Remarkably, since f can be tuned continuously, there are no gaps in the frequency range of the emitted EM. The fundamental Φ0-periodicity of f(Φ) is similar in nature to a SQUID's voltage response V(Φ) and, consequently, using high-performance magnetic flux-to-field conversion and readout techniques, a sensitive field-to-frequency magnetometer can be developed. Incorporated into non-accessible micro/nanostructures as a magnetic sensor, it would allow precise measurements of magnetic-fields from a distance, without the need to measure it locally as the radiation is detected remotely.
High Tc Josephson junctions have IcRn products as large as a few mV at liquid helium temperature, and hence, the frequency normalized by IcRn∕Φ0 becomes on the order of 10−3 for a gigahertz (GHz) microwave signal. (Here, Ic, Rn, and Φ0 are the critical current, the normal resistance, and a flux quantum, respectively.) It is well known that a microwave-current-driven Josephson junction does not exhibit clear Shapiro steps under such low frequency conditions. Instead of Shapiro steps, however, we often observe a current-step-like structure in the current–voltage curve of YBa2Cu3O7−δ grain boundary Josephson junctions coupled to a GHz signal. In this article, we present a model analysis for such current-step-like structures. Two types of device models are employed: a simple resistively and capacitively shunted junction model and a rf-field-driven two-junction superconducting quantum interference device model. Numerical results of the latter model agree with the experimental results, which indicates that the envelope of small Shapiro steps, including the effects of microwave-induced motion of flux quanta, appears as a current-step-like structure in a high Tc Josephson device coupled to a GHz microwave.
We have fabricated a YBa/sub 2/Cu/sub 3/O/sub y/ (YBCO) array of five Josephson junctions designed with additional inductive coupling lines (AICLs). The junctions in this array were dc-biased in parallel to oscillate coherently in-phase and integrated with AICLs to improve the impedance matching between this array and external circuits such as a waveguide. The effect of AICLs was investigated by studying its influence on the current-voltage characteristics of the Josephson junction array (JJA) under external microwave irradiations with frequency of 22 GHz. The experimental results show that the behavior of the Shapiro-steps depends upon the effective inductance of AICLs which affects the total impedance and microwave coupling. We were able to obtain an oscillation frequency of about 73% of the maximum available frequency calculated from the characteristic voltage of the Josephson junctions in the array at a temperature of 12 K. By calculating the total impedance of the array, we obtained the suitable parameters of the array for microwave coupling with waveguide for various values of inductance, ac frequencies and number of Josephson junctions.
We observed the ac Josephson effect, the ‘‘Shapiro step,’’ at the high frequency of 584 GHz in an YBa2Cu3O7−δ grain boundary Josephson junction at 4.2 K for the first time. This Shapiro step grew to about 8% of the critical current without irradiation. We also noted that the critical current was gradually suppressed with increasing power. The critical current with irradiation was suppressed to about 97% of the critical current without irradiation. Detailed investigation revealed the consistency between the above two phenomena.
Effects of magnetic fields and microwave radiation on I-V characteristics of YBa2Cu3Oy high-T, Josephson junctions, SQUIDS and Josephson arrays were reported in this experiment, with special emphasis focused on the effects of microwave radiation. In addition to the ordinary constant-voltage steps resulting from the ac Josephson effect, noninteger constant voltage steps are occasionally observed under microwave radiation. We attribute these noninteger constant-voltage steps to the flux coupled to junctions or SQUIDS. Resistive SQUIDS disclose V-Φmodulation without a biased current. The peak to peak value AV of a V-Φ curve is enhanced by microwave radiation.