Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2209.05807 · Physical Review Applied

Quadrature-Averaged Homodyne Detection for Estimating Cavity Parameters

Giada R. La Gala, Arvind Shankar Kumar, Rick Leijssen, Ewold Verhagen, Juha T. Muhonen

Published Jun 2, 2023• 2 citations
arXivHTMLPDF

Abstract

Balanced homodyne interferometry is a well-known detection technique that allows for sensitive characterization of light fields. Conventionally a homodyne interferometer is operated by locking the relative phase of a reference beam to the signal beam by means of an active feedback loop. A less often used method is to perform a slow continuous modulation of the reference beam arm length that corresponds to averaging all relative phases during the measurement. Here we show theoretically and experimentally that this quadrature averaging can be advantageous in estimating the parameters of a resonant optical cavity. We demonstrate that the averaging turns the transduction function, from cavity frequency fluctuations into the interferometer signal, into a simple function of the laser detuning that, notably, does not depend on the parameters of possible nonresonant channels present in the system. The method needs no active feedback and gives results that are easy to interpret. Moreover, the phase-averaged measurement allows characterization of the absolute magnitude of a cavity frequency modulation.

DOI
10.1103/physrevapplied.19.064006

Related papers

Locking the phase of balanced homodyne detection system for squeezed light

Zhang Yan, Xudong Yu, Ke Di Ma +2 more

The balanced homodyne detection technique is an important method to detect the quantum light field. The signal light injected into the phase sensitive optical parameter amplifier (OPA) is phase modulated. The output squeezed light of OPA is detected by the balanced homodyne detection system. When the phase sensitive OPA is operated at parametric amplification and deamplification respectively, we can judge which quadrature component of the quantum light field is measured by observing the modulation signal. We can demodulate the phase modulation signal to achieve the error signal, which is used to lock the relative phase of zero between the local and the quantum light fields (corresponding to the quadrature-amplitude of the unknown light field).

Acta Physica Sinica•Jan 1, 2013•8 citations

8-port homodyne detection of optical fields using IQ demodulation

Greg Dmochowski, Amir Feizpour, X Xing

Abstract A phase-sensitive detection scheme for optical fields is described, which allows for the simultaneous measurement of orthogonal field quadratures. The recent achievement of -radian cross-phase shifts between a single photon and a second light field has opened the door to quantum computing protocols which utilize photonic quantum bits. Optical phase measurements play an integral role in these schemes. The detection scheme presented here was designed to measure such transient phase shifts of a laser field as it interacts with another light field through a cloud of laser-cooled Rb atoms. In place of conventional spatial interferometry, which is very sensitive to mechanical instabilities, the scheme utilizes beat-note interferometry to improve on the robustness of the measurement. Beat-note interferometry serves to map a signal from a THz-frequency carrier onto a radio-frequency carrier. A variant of 8-port optical homodyne detection, the scheme then uses IQ demodulation, a well-established technique in communications engineering, to extract amplitude information for both the in-phase (I) and quadrature-phase (Q) components of the radio-frequency signal. This IQ data can then be used to extract any amplitude variation and/or phase shifts of the original THz-frequency optical field. The technique is illustrated here by simultaneously measuring the absorption and dispersion experienced by an optical beam as it passes through a cloud of laser-cooled atoms, which have been prepared in a state of electromagnetically-induced transparency. A thorough characterization of the measurement is presented, which identifies the dominant noise sources and illustrates the utility of IQ demodulation in eliminating noise. This scheme has been used to measure rad phase shifts on nanosecond time scales.

Measurement Science and Technology•Apr 1, 2019•2 citations

Quantum Noise: Basic Measurements and Techniques

Hans‐A. Bachor, Timothy C. Ralph

This chapter focuses on the measurement of quantum noise, that is the fundamental noise we observe on the photocurrent when we detect optical beams with a large coherent amplitude using photodetectors. It also focuses on continuous wave laser beams and the noise associated with the intensity, amplitude, and phase of the light. Three different techniques are commonly used: direct detection, balanced detection, and homodyne detection. The choice depends on the properties of laser beam. Heterodyne detection is frequently used to determine the linewidth of an unknown laser. The intensity noise of a laser can be reduced using an electro-optic modulator and a feedback controller, known as a noise eater. The chapter explains Frequency Stabilization process and Locking of Cavities. It outlines the principles of the locking technique. The commonly used locking techniques include Pound-Drever-Hall Locking, tilt locking and optical injection locking.

Wiley eBooks•Jul 5, 2019•1 citation

Operational theory of homodyne detection

Konrad Banaszek, Krzysztof Wódkiewicz

We discuss a balanced homodyne detection scheme with imperfect detectors in the framework of the operational approach to quantum measurement. We show that a realistic homodyne measurement is described by a family of operational observables that depends on the experimental setup, rather than a single field quadrature operator. We find an explicit form of this family, which fully characterizes the experimental device and is independent of a specific state of the measured system. We also derive operational homodyne observables for the setup with a random phase, which has been recently applied in an ultrafast measurement of the photon statistics of a pulsed diode laser. The operational formulation directly gives the relation between the detected noise and the intrinsic quantum fluctuations of the measured field. We demonstrate this with two examples: the operational uncertainty relation for the field quadratures, and the homodyne detection of suppressed fluctuations in photon statistics.

arXiv:atom-ph/9609001•Physical Review A•Apr 1, 1997•68 citations

Squeezing via feedback

Howard M. Wiseman, Gerard J Milburn

We present the quantum theory of optical cavity feedback mediated by homodyne detection, with an arbitrary time delay. We apply this theory to a system with nonclassical dynamics, a sub-Poissonian pumped laser. By using the feedback to phase lock the laser it is possible to produce output light which exhibits perfect quadrature squeezing on resonance, rather than just sub-Poissonian intensity statistics. However, we also show that feedback mediated by homodyne detection (or any other extracavity measurement) cannot produce nonclassical light unless the cavity dynamics can do so without feedback. Furthermore, in systems which already exhibit squeezing, such feedback can only degrade the squeezing in the output. With feedback mediated by an intracavity measurement, these theorems do not apply. We show that an (admittedly unrealistic) intracavity quantum nondemolition quadrature measurement allows arbitrary squeezing to be produced by controlling the amplitude of a coherent driving field.

Physical Review A•Feb 1, 1994•175 citations

Accessing the Phase Quadrature of Intense Non-Classical Light State

O. Glöckl, Ulrik L. Andersen, Gerd Leuchs

Phase sensitive measurements are required to characterize the quantum state of a light field in the regime of continuous variables. The standard approach to do this is to use homodyne detection. However, if the signal beam under investigation is very intense, this technique is not appropriate. We present a setup for performing sub-shot-noise measurements of the phase quadrature of intense pulsed light without the use of a separate local oscillator. A Mach Zehnder interferometer with an unbalanced arm length is used to detect the fluctuations of the phase quadrature at a single sideband frequency. Using that tool, short entangled light pulses generated in optical fibres could be applied efficiently in quantum information and quantum communication protocols. We show experimentally that the setup can be used to demonstrate the non–separability of a pair of quadrature-entangled beams.

IMPERIAL COLLEGE PRESS eBooks•Feb 1, 2007•0 citations
Balanced homodyne interferometry is a well-known detection technique that allows for sensitive characterization of light fields. Conventionally a homodyne interferometer is operated by locking the relative phase of a reference beam to the signal beam by means of an active feedback loop. A less often used method is to perform a slow continuous modulation of the reference beam arm length that corresponds to averaging all relative phases during the measurement. Here we show theoretically and experimentally that this quadrature averaging can be advantageous in estimating the parameters of a resonant optical cavity. We demonstrate that the averaging turns the transduction function, from cavity frequency fluctuations into the interferometer signal, into a simple function of the laser detuning that, notably, does not depend on the parameters of possible nonresonant channels present in the system. The method needs no active feedback and gives results that are easy to interpret. Moreover, the phase-averaged measurement allows characterization of the absolute magnitude of a cavity frequency modulation.
The balanced homodyne detection technique is an important method to detect the quantum light field. The signal light injected into the phase sensitive optical parameter amplifier (OPA) is phase modulated. The output squeezed light of OPA is detected by the balanced homodyne detection system. When the phase sensitive OPA is operated at parametric amplification and deamplification respectively, we can judge which quadrature component of the quantum light field is measured by observing the modulation signal. We can demodulate the phase modulation signal to achieve the error signal, which is used to lock the relative phase of zero between the local and the quantum light fields (corresponding to the quadrature-amplitude of the unknown light field).
Abstract A phase-sensitive detection scheme for optical fields is described, which allows for the simultaneous measurement of orthogonal field quadratures. The recent achievement of -radian cross-phase shifts between a single photon and a second light field has opened the door to quantum computing protocols which utilize photonic quantum bits. Optical phase measurements play an integral role in these schemes. The detection scheme presented here was designed to measure such transient phase shifts of a laser field as it interacts with another light field through a cloud of laser-cooled Rb atoms. In place of conventional spatial interferometry, which is very sensitive to mechanical instabilities, the scheme utilizes beat-note interferometry to improve on the robustness of the measurement. Beat-note interferometry serves to map a signal from a THz-frequency carrier onto a radio-frequency carrier. A variant of 8-port optical homodyne detection, the scheme then uses IQ demodulation, a well-established technique in communications engineering, to extract amplitude information for both the in-phase (I) and quadrature-phase (Q) components of the radio-frequency signal. This IQ data can then be used to extract any amplitude variation and/or phase shifts of the original THz-frequency optical field. The technique is illustrated here by simultaneously measuring the absorption and dispersion experienced by an optical beam as it passes through a cloud of laser-cooled atoms, which have been prepared in a state of electromagnetically-induced transparency. A thorough characterization of the measurement is presented, which identifies the dominant noise sources and illustrates the utility of IQ demodulation in eliminating noise. This scheme has been used to measure rad phase shifts on nanosecond time scales.
This chapter focuses on the measurement of quantum noise, that is the fundamental noise we observe on the photocurrent when we detect optical beams with a large coherent amplitude using photodetectors. It also focuses on continuous wave laser beams and the noise associated with the intensity, amplitude, and phase of the light. Three different techniques are commonly used: direct detection, balanced detection, and homodyne detection. The choice depends on the properties of laser beam. Heterodyne detection is frequently used to determine the linewidth of an unknown laser. The intensity noise of a laser can be reduced using an electro-optic modulator and a feedback controller, known as a noise eater. The chapter explains Frequency Stabilization process and Locking of Cavities. It outlines the principles of the locking technique. The commonly used locking techniques include Pound-Drever-Hall Locking, tilt locking and optical injection locking.
We discuss a balanced homodyne detection scheme with imperfect detectors in the framework of the operational approach to quantum measurement. We show that a realistic homodyne measurement is described by a family of operational observables that depends on the experimental setup, rather than a single field quadrature operator. We find an explicit form of this family, which fully characterizes the experimental device and is independent of a specific state of the measured system. We also derive operational homodyne observables for the setup with a random phase, which has been recently applied in an ultrafast measurement of the photon statistics of a pulsed diode laser. The operational formulation directly gives the relation between the detected noise and the intrinsic quantum fluctuations of the measured field. We demonstrate this with two examples: the operational uncertainty relation for the field quadratures, and the homodyne detection of suppressed fluctuations in photon statistics.
We present the quantum theory of optical cavity feedback mediated by homodyne detection, with an arbitrary time delay. We apply this theory to a system with nonclassical dynamics, a sub-Poissonian pumped laser. By using the feedback to phase lock the laser it is possible to produce output light which exhibits perfect quadrature squeezing on resonance, rather than just sub-Poissonian intensity statistics. However, we also show that feedback mediated by homodyne detection (or any other extracavity measurement) cannot produce nonclassical light unless the cavity dynamics can do so without feedback. Furthermore, in systems which already exhibit squeezing, such feedback can only degrade the squeezing in the output. With feedback mediated by an intracavity measurement, these theorems do not apply. We show that an (admittedly unrealistic) intracavity quantum nondemolition quadrature measurement allows arbitrary squeezing to be produced by controlling the amplitude of a coherent driving field.
Phase sensitive measurements are required to characterize the quantum state of a light field in the regime of continuous variables. The standard approach to do this is to use homodyne detection. However, if the signal beam under investigation is very intense, this technique is not appropriate. We present a setup for performing sub-shot-noise measurements of the phase quadrature of intense pulsed light without the use of a separate local oscillator. A Mach Zehnder interferometer with an unbalanced arm length is used to detect the fluctuations of the phase quadrature at a single sideband frequency. Using that tool, short entangled light pulses generated in optical fibres could be applied efficiently in quantum information and quantum communication protocols. We show experimentally that the setup can be used to demonstrate the non–separability of a pair of quadrature-entangled beams.