Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2208.03738 · Physical Review Applied

Time-Dependent Magnetic Flux in Devices for Circuit Quantum Electrodynamics

Jacob Bryon, Daniel Weiss, Xinyuan You, Sara Sussman, Xanthe Croot, Ziwen Huang, Jens Koch, Andrew Houck

Published Mar 9, 2023• 32 citations
arXivHTMLPDF

Abstract

Time-dependent external flux is ubiquitous across circuit quantum electrodynamics and calls for accurate modeling. Contrary to long-held belief, it is recently predicted---but not yet verified---that the allocation of time-dependent flux cannot be arbitrary in the Hamiltonian. This study provides an experimental verification of this prediction by applying fast flux pulses to a fluxonium qubit and taking measurements of the quantum state following the pulses. Given the widespread use of time-dependent flux in experiments with superconducting qubits, verification of this theory is critical to our understanding of circuit quantum electrodynamics.

DOI
10.1103/physrevapplied.19.034031

Related papers

Circuit Quantum Electrodynamics with Flux Qubits

Jean-Luc Orgiazzi

This thesis presents circuit quantum electrodynamic (cQED) experiments done with artificial atoms coupled to a high quality factor superconducting microwave resonator. This work discusses the theoretical framework, design, fabrication, implementation and characterization of a multi-qubit system using superconducting persistent current qubits, often referred as flux qubits. \n \nWe developed a new type of cryogenic aid for fast turnaround microwave experiments. The minimum turnaround time to perform microwave experiments in dilution refrigerators is typically a few days, as required by cooling down and warming up the entire refrigerator. The cryogenic microwave payload and wiring needed for each qubit and resonator add a significant heat load to \nthe system which typically only has a few µW s of cooling power at millikelvin temperatures. We present a new experimental approach we developed in which a suitable sample holder is attached to a cold-insertable probe and brought in contact with transmission lines permanently mounted inside the cryostat. The total turnaround time is reduced to 8 hours if the target temperature is 80 mK. This new measurement method increased our ability to successfully identify good devices with fast design-characterization iterations, while allowing months-long measurements at 30 mK. \n \nOur device architecture uses several qubits, each of which is controlled via on-chip fast flux bias lines. Readout of the qubit’s quantum state is performed by homodyne detection of the resonator field at large driving power. We observe long coherence times at the optimal bias point of the flux qubits and present decoherence measurements around this optimal point, where the \nflux qubits couple mostly to magnetic flux noise. Dynamical decoupling techniques employing fast microwave pulses are used to protect the qubit’s coherence and allow calculating the magnetic flux noise power spectral density of the qubit’s environment. Photon-mediated interaction between distant qubits in the resonator allows the implementation of a two-qubit controlled-NOT gate \nusing the selective darkening technique. \n \nThis multi-qubit superconducting design is an interesting platform to study the decoherence properties of flux qubits, the properties of strong interaction of electromagnetic radiation with macroscopic quantum systems. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.

•Sep 23, 2019•0 citations

Improved fluxonium readout through dynamic flux pulsing

Taryn V. Stefanski, Yilmaz, Figen, Eugene Y. Huang +5 more

The ability to perform rapid, high fidelity readout of a qubit state is an important requirement for quantum algorithms and, in particular, for enabling operations such as mid-circuit measurements and measurement-based feedback for error correction schemes on large quantum processors. The growing interest in fluxonium qubits, due to their long coherence times and high anharmonicity, merits further attention to reducing the readout duration and measurement errors. We find that this can be accomplished by exploiting the flux tunability of fluxonium qubits. In this work, we experimentally demonstrate flux-pulse-assisted readout, as proposed in Phys. Rev. Applied 22, 014079 (https://doi.org/10.1103/PhysRevApplied.22.014079), in a setup without a quantum-limited parametric amplifier. Increasing the dispersive shift magnitude by almost 20% through flux pulsing, we achieve an assignment fidelity of 94.3% with an integration time of 280 ns. The readout performance is limited by state initialization, but we find that the limit imposed only by the signal-to-noise ratio corresponds to an assignment fidelity of 99.9% with a 360 ns integration time. We also verify these results through simple semi-classical simulations. These results constitute the fastest reported readout of a fluxonium qubit, with the prospect of further improvement by incorporation of a parametric amplifier in the readout chain to enhance measurement efficiency.

arXiv:2411.13437•Nov 20, 2024•14 citations

Mitigating state-transition errors during readout with a synchronized flux pulse

Yulong Li, Wuerkaixi Nuerbolati, Chunqing Deng +3 more

State transitions during qubit measurements are extremely detrimental to quantum tasks that rely on repeated measurements, such as quantum error correction. These state transitions can occur when excessive measurement power leads to qubit excitations outside its computational space. Alternatively, the qubit state can decay rapidly when the measurement protocol inadvertently couples the qubit to lossy modes such as two-level systems (TLSs). We experimentally verify the impact of these TLSs in qubit readout by measuring the transition errors at different qubit flux bias. Because such state transitions during measurements are often localized in frequency space, we demonstrate the ability to avoid them during a fluxonium readout by exploiting the qubit's flux-tunability. By synchronizing the flux bias with the readout photon dynamics, we obtain an optimal readout fidelity of 99 % (98.4 %) in 1 us (0.5 us) integration time. Our work advances the understanding of state transitions in superconducting circuit measurements and demonstrates the potential of fluxonium qubits to achieve fast high-fidelity readout.

arXiv:2507.14436•Physical Review Applied•Apr 21, 2026•4 citations

Systematic Construction of Time-Dependent Hamiltonians for Microwave-Driven Josephson Circuits

Yao Lu, Tianpu Zhao, André Vallières +13 more

Time-dependent electromagnetic drives are fundamental for controlling complex quantum systems, including superconducting Josephson circuits. In these devices, accurate time-dependent Hamiltonian models are imperative for predicting their dynamics and designing high-fidelity quantum operations. Existing numerical methods, such as black-box quantization (BBQ) and energy-participation ratio (EPR), excel at modeling the static Hamiltonians of Josephson circuits. However, these techniques do not fully capture the behavior of driven circuits stimulated by external microwave drives, nor do they include a generalized approach to account for the inevitable noise and dissipation that enter through microwave ports. Here, we introduce numerical techniques that leverage classical microwave simulations, efficiently executable in finite-element solvers, to obtain the time-dependent Hamiltonian of microwave-driven superconducting circuits with arbitrary geometries under charge, flux, or mixed electromagnetic modulation. Importantly, our techniques do not rely on a lumped-element description of the superconducting circuit, in contrast to previous approaches to tackling this problem. We demonstrate the versatility of our approach by characterizing the driven properties of realistic circuit devices in complex electromagnetic environments, including coherent dynamics due to charge and flux modulation, as well as drive-induced relaxation and dephasing. Our techniques offer a powerful toolbox for optimizing circuit designs and advancing practical applications in superconducting quantum computing.

quant-pharXiv:2512.20743•PRX Quantum•Dec 25, 2025•5 citations

Circuit QED with fluxonium qubits: Theory of the dispersive regime

Guanyu Zhu, David Ferguson, Vladimir Manucharyan +1 more

In circuit QED, protocols for quantum gates and readout of superconducting qubits often rely on the dispersive regime, reached when the qubit-photon detuning $\ensuremath{\Delta}$ is large compared to the mutual coupling strength. For qubits including the Cooper-pair box and transmon, selection rules dramatically restrict the contributions to dispersive level shifts $\ensuremath{\chi}$. By contrast, in the absence of selection rules many virtual transitions contribute to $\ensuremath{\chi}$ and can produce sizable dispersive shifts even at large detuning. We present theory for a generic multilevel qudit capacitively coupled to one or multiple harmonic modes and give general expressions for the effective Hamiltonian in second- and fourth-order perturbation theory. Applying our results to the fluxonium system, we show that the absence of strong selection rules explains the surprisingly large dispersive shifts observed in experiments and leads to the prediction of a two-photon vacuum Rabi splitting. Quantitative predictions from our theory are in good agreement with experimental data over a wide range of magnetic flux and reveal that fourth-order resonances are important for the phase modulation observed in fluxonium spectroscopy.

arXiv:1210.1605•Physical Review B•Jan 14, 2013•137 citations

Flux qubits in a planar circuit quantum electrodynamics architecture: Quantum control and decoherence

Jean-Luc Orgiazzi, C. Deng, David Layden +6 more

We report experiments on superconducting flux qubits in a circuit quantum electrodynamics (cQED) setup. Two qubits, independently biased and controlled, are coupled to a coplanar waveguide resonator. Dispersive qubit state readout reaches a maximum contrast of 72%. We measure energy relaxation times at the symmetry point of 5 and $10\ensuremath{\mu}\mathrm{s}$, corresponding to 7 and $20\ensuremath{\mu}\mathrm{s}$ when relaxation through the resonator due to Purcell effect is subtracted out, and levels of flux noise of 2.6 and $2.7\phantom{\rule{0.222222em}{0ex}}\ensuremath{\mu}{\mathrm{\ensuremath{\Phi}}}_{0}/\sqrt{\text{Hz}}$ at 1 Hz for the two qubits. We discuss the origin of decoherence in the measured devices. The strong coupling between the qubits and the cavity leads to a large, cavity-mediated, qubit-qubit coupling. This coupling, which is characterized spectroscopically, reaches 38 MHz. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.

arXiv:1407.1346•Physical review. B./Physical review. B•Mar 15, 2016•60 citations
Time-dependent external flux is ubiquitous across circuit quantum electrodynamics and calls for accurate modeling. Contrary to long-held belief, it is recently predicted---but not yet verified---that the allocation of time-dependent flux cannot be arbitrary in the Hamiltonian. This study provides an experimental verification of this prediction by applying fast flux pulses to a fluxonium qubit and taking measurements of the quantum state following the pulses. Given the widespread use of time-dependent flux in experiments with superconducting qubits, verification of this theory is critical to our understanding of circuit quantum electrodynamics.
This thesis presents circuit quantum electrodynamic (cQED) experiments done with artificial atoms coupled to a high quality factor superconducting microwave resonator. This work discusses the theoretical framework, design, fabrication, implementation and characterization of a multi-qubit system using superconducting persistent current qubits, often referred as flux qubits. \n \nWe developed a new type of cryogenic aid for fast turnaround microwave experiments. The minimum turnaround time to perform microwave experiments in dilution refrigerators is typically a few days, as required by cooling down and warming up the entire refrigerator. The cryogenic microwave payload and wiring needed for each qubit and resonator add a significant heat load to \nthe system which typically only has a few µW s of cooling power at millikelvin temperatures. We present a new experimental approach we developed in which a suitable sample holder is attached to a cold-insertable probe and brought in contact with transmission lines permanently mounted inside the cryostat. The total turnaround time is reduced to 8 hours if the target temperature is 80 mK. This new measurement method increased our ability to successfully identify good devices with fast design-characterization iterations, while allowing months-long measurements at 30 mK. \n \nOur device architecture uses several qubits, each of which is controlled via on-chip fast flux bias lines. Readout of the qubit’s quantum state is performed by homodyne detection of the resonator field at large driving power. We observe long coherence times at the optimal bias point of the flux qubits and present decoherence measurements around this optimal point, where the \nflux qubits couple mostly to magnetic flux noise. Dynamical decoupling techniques employing fast microwave pulses are used to protect the qubit’s coherence and allow calculating the magnetic flux noise power spectral density of the qubit’s environment. Photon-mediated interaction between distant qubits in the resonator allows the implementation of a two-qubit controlled-NOT gate \nusing the selective darkening technique. \n \nThis multi-qubit superconducting design is an interesting platform to study the decoherence properties of flux qubits, the properties of strong interaction of electromagnetic radiation with macroscopic quantum systems. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.
The ability to perform rapid, high fidelity readout of a qubit state is an important requirement for quantum algorithms and, in particular, for enabling operations such as mid-circuit measurements and measurement-based feedback for error correction schemes on large quantum processors. The growing interest in fluxonium qubits, due to their long coherence times and high anharmonicity, merits further attention to reducing the readout duration and measurement errors. We find that this can be accomplished by exploiting the flux tunability of fluxonium qubits. In this work, we experimentally demonstrate flux-pulse-assisted readout, as proposed in Phys. Rev. Applied 22, 014079 (https://doi.org/10.1103/PhysRevApplied.22.014079), in a setup without a quantum-limited parametric amplifier. Increasing the dispersive shift magnitude by almost 20% through flux pulsing, we achieve an assignment fidelity of 94.3% with an integration time of 280 ns. The readout performance is limited by state initialization, but we find that the limit imposed only by the signal-to-noise ratio corresponds to an assignment fidelity of 99.9% with a 360 ns integration time. We also verify these results through simple semi-classical simulations. These results constitute the fastest reported readout of a fluxonium qubit, with the prospect of further improvement by incorporation of a parametric amplifier in the readout chain to enhance measurement efficiency.
State transitions during qubit measurements are extremely detrimental to quantum tasks that rely on repeated measurements, such as quantum error correction. These state transitions can occur when excessive measurement power leads to qubit excitations outside its computational space. Alternatively, the qubit state can decay rapidly when the measurement protocol inadvertently couples the qubit to lossy modes such as two-level systems (TLSs). We experimentally verify the impact of these TLSs in qubit readout by measuring the transition errors at different qubit flux bias. Because such state transitions during measurements are often localized in frequency space, we demonstrate the ability to avoid them during a fluxonium readout by exploiting the qubit's flux-tunability. By synchronizing the flux bias with the readout photon dynamics, we obtain an optimal readout fidelity of 99 % (98.4 %) in 1 us (0.5 us) integration time. Our work advances the understanding of state transitions in superconducting circuit measurements and demonstrates the potential of fluxonium qubits to achieve fast high-fidelity readout.
Time-dependent electromagnetic drives are fundamental for controlling complex quantum systems, including superconducting Josephson circuits. In these devices, accurate time-dependent Hamiltonian models are imperative for predicting their dynamics and designing high-fidelity quantum operations. Existing numerical methods, such as black-box quantization (BBQ) and energy-participation ratio (EPR), excel at modeling the static Hamiltonians of Josephson circuits. However, these techniques do not fully capture the behavior of driven circuits stimulated by external microwave drives, nor do they include a generalized approach to account for the inevitable noise and dissipation that enter through microwave ports. Here, we introduce numerical techniques that leverage classical microwave simulations, efficiently executable in finite-element solvers, to obtain the time-dependent Hamiltonian of microwave-driven superconducting circuits with arbitrary geometries under charge, flux, or mixed electromagnetic modulation. Importantly, our techniques do not rely on a lumped-element description of the superconducting circuit, in contrast to previous approaches to tackling this problem. We demonstrate the versatility of our approach by characterizing the driven properties of realistic circuit devices in complex electromagnetic environments, including coherent dynamics due to charge and flux modulation, as well as drive-induced relaxation and dephasing. Our techniques offer a powerful toolbox for optimizing circuit designs and advancing practical applications in superconducting quantum computing.
In circuit QED, protocols for quantum gates and readout of superconducting qubits often rely on the dispersive regime, reached when the qubit-photon detuning $\ensuremath{\Delta}$ is large compared to the mutual coupling strength. For qubits including the Cooper-pair box and transmon, selection rules dramatically restrict the contributions to dispersive level shifts $\ensuremath{\chi}$. By contrast, in the absence of selection rules many virtual transitions contribute to $\ensuremath{\chi}$ and can produce sizable dispersive shifts even at large detuning. We present theory for a generic multilevel qudit capacitively coupled to one or multiple harmonic modes and give general expressions for the effective Hamiltonian in second- and fourth-order perturbation theory. Applying our results to the fluxonium system, we show that the absence of strong selection rules explains the surprisingly large dispersive shifts observed in experiments and leads to the prediction of a two-photon vacuum Rabi splitting. Quantitative predictions from our theory are in good agreement with experimental data over a wide range of magnetic flux and reveal that fourth-order resonances are important for the phase modulation observed in fluxonium spectroscopy.
We report experiments on superconducting flux qubits in a circuit quantum electrodynamics (cQED) setup. Two qubits, independently biased and controlled, are coupled to a coplanar waveguide resonator. Dispersive qubit state readout reaches a maximum contrast of 72%. We measure energy relaxation times at the symmetry point of 5 and $10\ensuremath{\mu}\mathrm{s}$, corresponding to 7 and $20\ensuremath{\mu}\mathrm{s}$ when relaxation through the resonator due to Purcell effect is subtracted out, and levels of flux noise of 2.6 and $2.7\phantom{\rule{0.222222em}{0ex}}\ensuremath{\mu}{\mathrm{\ensuremath{\Phi}}}_{0}/\sqrt{\text{Hz}}$ at 1 Hz for the two qubits. We discuss the origin of decoherence in the measured devices. The strong coupling between the qubits and the cavity leads to a large, cavity-mediated, qubit-qubit coupling. This coupling, which is characterized spectroscopically, reaches 38 MHz. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.