Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2207.13539

Interaction-Free Polarimetry

Jonte R. Hance, John Rarity

Published Jul 27, 2022• 0 citations
arXivHTMLPDF

Abstract

The combination of interaction-free measurement and the quantum Zeno effect has been shown to both increase the signal-to-noise ratio of imaging, and decrease the light intensity flux through the imaged object. So far though, this has only been considered for discrimination between translucent and opaque areas of an object. In this paper, we extend this to the polarimetry of a given sample. This will allow the identification and characterisation of these samples with far less absorbed energy than current approaches -- a key concern for delicate samples being probed with high-frequency radiation.

DOI
10.48550/arxiv.2207.13539

Related papers

Interaction-Free Polarimetry of a Polarising Object

Jonte R. Hance, John Rarity

We extend counterfactual imaging to polarimetry of a polarising object. This allows imaging of these samples with far less absorbed energy - a key concern when imaging with high-frequency radiation.

Quantum 2.0 Conference and Exhibition•Jan 1, 2022•0 citations

Polarimetry of a Polarising Object without Photon Interaction

Jonte R. Hance, John Rarity

We extend counterfactual, or exchange-free, imaging to the polarimetry of a polarising object. This allows imaging of these samples with far less absorbed energy - a key concern when imaging with high-frequency radiation.

Optica Advanced Photonics Congress•Jan 1, 2022•0 citations

Experimental and Theoretical Progress in Interaction-free Measurements

Paul G. Kwiat

Using a hybrid of a simple interference technique and an application of the quantum Zeno effect, it is possible to optically determine the presence of an absorbing object with an arbitrarily low probability that a photon is actually absorbed. We have demonstrated the feasibility of systems in which up to 85% of the measurements could be “interaction-free”. Also, we have started investigating the possibility of using these techniques to allow “interaction-free” imaging of objects; our prototype schemes have shown resolutions of less than 10 µm. Finally, we present a curious phenomenon that occurs when the object in question is only partially transmitting, which should allow a seeming violation of Beer’s law.

Physica Scripta•Jan 1, 1998•32 citations

"Interaction-free" quantum measurements

Andrew G. White, Paul G. Kwiat, Olaf Nairz +2 more

Summary form only given.Using the complementary wave-like and particle-like natures of photons, one can make interaction-free measurements (IFM)-the presence of an object can be determined with no photons being absorbed. By using an application of the quantum Zeno effect (weakly and repeatedly testing for the object's presence so that the otherwise coherent evolution of the interrogating photon is inhibited), we have demonstrated the feasibility of IFMs with an efficiency of >85%, higher than that possible in the original IFM scheme, where, at most, half of the measurements could be interaction free. We also investigate various interaction-free imaging systems, demonstrate imaging with a resolution <5 /spl mu/m, and define the limits to these systems. We also discuss in which sense interaction-free measurements really are not.

Conference on Lasers and Electro-Optics•Jan 1, 1998•10 citations

High-Efficiency Quantum Interrogation Measurements via the Quantum Zeno Effect

Paul G. Kwiat, Andrew G. White, J. R. Mitchell +4 more

The phenomenon of quantum interrogation allows one to optically detect the presence of an absorbing object, without the measuring light interacting with it. In an application of the quantum Zeno effect, the object inhibits the otherwise coherent evolution of the light, such that the probability that an interrogating photon is absorbed can in principle be arbitrarily small. We have implemented this technique, achieving efficiencies of up to $73%$, and consequently exceeding the $50%$ theoretical maximum of the original ``interaction-free'' measurement proposal. We have also predicted and experimentally verified a previously unsuspected dependence on loss.

arXiv:quant-ph/9909083•Physical Review Letters•Dec 6, 1999•222 citations

Interaction-free ghost-imaging of structured objects (Conference Presentation)

Yingwen Zhang, Alicia Sit, Frédéric Bouchard +6 more

Correlated light (either classical or quantum) can be employed in various ways to improve resolution and measurement sensitivity. In an “interaction-free” measurement, a single photon can be used to reveal the presence of an object placed within one arm of an interferometer without being absorbed by it. This method has previously been applied to imaging. With a technique known as “ghost imaging”, entangled photon pairs are used for detecting an opaque object with significantly improved signal-to-noise ratio while preventing over-illumination. Here, we integrate these two methods to obtain a new imaging technique which we term “interaction-free ghost-imaging” that possesses the benefits of both techniques. While improving the image quality of conventional ghost-imaging, this new technique is also sensitive to phase and polarization changes in the photons introduced by a structured object. Furthermore, thanks to the “interaction-free” nature of this new technique, it is possible to reduce the number of photons required to produce a clear image of the object (which could be otherwise damaged by the photons) making this technique superior for probing light-sensitive materials and eventually biological tissues. If time allows, I will discuss some follow-up works involving partial measurements and remote erasure/completion of images. The latter techniques can help to suppress various types of noise during the imaging process.

•Mar 5, 2019•0 citations
The combination of interaction-free measurement and the quantum Zeno effect has been shown to both increase the signal-to-noise ratio of imaging, and decrease the light intensity flux through the imaged object. So far though, this has only been considered for discrimination between translucent and opaque areas of an object. In this paper, we extend this to the polarimetry of a given sample. This will allow the identification and characterisation of these samples with far less absorbed energy than current approaches -- a key concern for delicate samples being probed with high-frequency radiation.
Using a hybrid of a simple interference technique and an application of the quantum Zeno effect, it is possible to optically determine the presence of an absorbing object with an arbitrarily low probability that a photon is actually absorbed. We have demonstrated the feasibility of systems in which up to 85% of the measurements could be “interaction-free”. Also, we have started investigating the possibility of using these techniques to allow “interaction-free” imaging of objects; our prototype schemes have shown resolutions of less than 10 µm. Finally, we present a curious phenomenon that occurs when the object in question is only partially transmitting, which should allow a seeming violation of Beer’s law.
Summary form only given.Using the complementary wave-like and particle-like natures of photons, one can make interaction-free measurements (IFM)-the presence of an object can be determined with no photons being absorbed. By using an application of the quantum Zeno effect (weakly and repeatedly testing for the object's presence so that the otherwise coherent evolution of the interrogating photon is inhibited), we have demonstrated the feasibility of IFMs with an efficiency of >85%, higher than that possible in the original IFM scheme, where, at most, half of the measurements could be interaction free. We also investigate various interaction-free imaging systems, demonstrate imaging with a resolution <5 /spl mu/m, and define the limits to these systems. We also discuss in which sense interaction-free measurements really are not.
The phenomenon of quantum interrogation allows one to optically detect the presence of an absorbing object, without the measuring light interacting with it. In an application of the quantum Zeno effect, the object inhibits the otherwise coherent evolution of the light, such that the probability that an interrogating photon is absorbed can in principle be arbitrarily small. We have implemented this technique, achieving efficiencies of up to 7373%73, and consequently exceeding the 5050%50 theoretical maximum of the original ``interaction-free'' measurement proposal. We have also predicted and experimentally verified a previously unsuspected dependence on loss.
Correlated light (either classical or quantum) can be employed in various ways to improve resolution and measurement sensitivity. In an “interaction-free” measurement, a single photon can be used to reveal the presence of an object placed within one arm of an interferometer without being absorbed by it. This method has previously been applied to imaging. With a technique known as “ghost imaging”, entangled photon pairs are used for detecting an opaque object with significantly improved signal-to-noise ratio while preventing over-illumination. Here, we integrate these two methods to obtain a new imaging technique which we term “interaction-free ghost-imaging” that possesses the benefits of both techniques. While improving the image quality of conventional ghost-imaging, this new technique is also sensitive to phase and polarization changes in the photons introduced by a structured object. Furthermore, thanks to the “interaction-free” nature of this new technique, it is possible to reduce the number of photons required to produce a clear image of the object (which could be otherwise damaged by the photons) making this technique superior for probing light-sensitive materials and eventually biological tissues. If time allows, I will discuss some follow-up works involving partial measurements and remote erasure/completion of images. The latter techniques can help to suppress various types of noise during the imaging process.