Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2206.11888 · Physical Review Letters

Transport of Multispecies Ion Crystals through a Junction in a Radio-Frequency Paul Trap

William Cody Burton, Brian Estey, Ian M. Hoffman, Abigail R. Perry, Curtis Volin, Gabriel Price

Published Apr 28, 2023• 36 citations
arXivHTMLPDF

Abstract

We report on the first demonstration of transport of a multispecies ion crystal through a junction in a rf Paul trap. The trap is a two-dimensional surface-electrode trap with an $\mathsf{X}$ junction and segmented control electrodes to which time-varying voltages are applied to control the shape and position of potential wells above the trap surface. We transport either a single ${^{171}\mathrm{Yb}}^{+}$ ion or a crystal composed of a ${^{138}\mathrm{Ba}}^{+}$ ion cotrapped with the ${^{171}\mathrm{Yb}}^{+}$ ion to any port of the junction. We characterize the motional excitation by performing multiple round-trips through the junction and back to the initial well position without cooling. The final excitation is then measured using sideband asymmetry. For a single ${^{171}\mathrm{Yb}}^{+}$ ion, transport with a $4\text{ }\text{ }\mathrm{m}/\mathrm{s}$ average speed induces between $0.013\ifmmode\pm\else\textpm\fi{}0.001$ and $0.014\ifmmode\pm\else\textpm\fi{}0.001$ quanta of excitation per round-trip, depending on the exit port. For a Ba-Yb crystal, transport at the same speed induces between $0.013\ifmmode\pm\else\textpm\fi{}0.001$ and $0.030\ifmmode\pm\else\textpm\fi{}0.002$ quanta per round-trip of excitation to the in-phase axial mode. Excitation in the out-of-phase axial mode ranges from $0.005\ifmmode\pm\else\textpm\fi{}0.001$ to $0.021\ifmmode\pm\else\textpm\fi{}0.001$ quanta per round-trip.

DOI
10.1103/physrevlett.130.173202

Related papers

Scalable Multispecies Ion Transport in a Grid-Based Surface-Electrode Trap

Robert D. Delaney, Lucas R. Sletten, Matthew J. Cich +13 more

Quantum processors based on linear arrays of trapped ions have achieved exceptional performance, but scaling to large qubit numbers requires realizing two-dimensional ion arrays as envisioned in the quantum charge-coupled device (QCCD) architecture. Here, we present a scalable method for the control of ion crystals in a grid-based surface-electrode Paul trap and characterize it in the context of transport operations that sort and reorder multispecies crystals. By combining cowiring of control electrodes at translationally symmetric locations in each grid site with the sitewise ability to exchange the voltages applied to two special electrodes gated by a binary input, site-dependent operations can be achieved using only a fixed number of analog voltage signals and a single digital input per site. In two separate experimental systems containing nominally identical grid traps, one using Yb + 171 − Ba + 138 crystals and the other Ba + 137 − Sr + 88 , we demonstrate this method by characterizing the conditional intrasite crystal reorder and the conditional exchange of ions between adjacent sites on the grid. Averaged across a multisite region of interest, we measure subquanta motional excitation in the axial in-phase and out-of-phase modes of the crystals following these operations at exchange rates of 2.5 kHz. In this initial demonstration, the logic controlling the voltage exchange occurs in software, but the applied signals mimic a proposed hardware implementation using crossover switches. These techniques can be further extended to implement other conditional operations in the QCCD architecture such as gates, initialization, and measurement. Published by the American Physical Society 2024

arXiv:2403.00756•Physical Review X•Nov 1, 2024•36 citations

Transport of ions in a segmented linear Paul trap in printed-circuit-board technology

G Huber, T. Deuschle, Wolfgang Schnitzler +3 more

We describe the construction and operation of a segmented linear Paul trap, fabricated in printed-circuit-board technology with an electrode segment width of 500 μm. We prove the applicability of this technology to reliable ion trapping and report the observation of Doppler-cooled ion crystals of 40 Ca + with this kind of trap. Measured trap frequencies agree with numerical simulations at the level of a few percent from which we infer a high fabrication accuracy of the segmented trap. To demonstrate its usefulness and versatility for trapped ion experiments we study the fast transport of a single ion. Our experimental results show a success rate of 99.0(1)% for a transport distance of 2 × 2 mm in a round-trip time of T = 20 μs, which corresponds to 4 axial oscillations only. We theoretically and experimentally investigate the excitation of oscillations caused by fast ion transports with error-function voltage ramps: for a slightly slower transport (a round-trip shuttle within T = 30 μs) we observe non-adiabatic motional excitation of 0.89(15) meV.

arXiv:0711.2947•New Journal of Physics•Jan 14, 2008•73 citations

Reliable transport through a microfabricated X -junction surface-electrode ion trap

Kenneth Wright, Jason Amini, Daniel L. Faircloth +9 more

We report the design, fabrication and characterization of a microfabricated surface-electrode ion trap that supports controlled transport through the two-dimensional intersection of linear trapping zones arranged in a 90° cross. The trap is fabricated with very large scalable integration techniques which are compatible with scaling to a large quantum information processor. The shape of the radio-frequency electrodes is optimized with a genetic algorithm to reduce axial pseudopotential barriers and minimize ion heating during transport. Seventy-eight independent dc control electrodes enable fine control of the trapping potentials. We demonstrate reliable ion transport between junction legs and determine the rate of ion loss due to transport. Doppler-cooled ions survive more than 10 5 round-trip transits between junction legs without loss and more than 65 consecutive round trips without laser cooling.

arXiv:1210.3655•New Journal of Physics•Mar 4, 2013•89 citations

Monolithic Segmented 3D Ion Trap for Quantum Technology Applications

Abhishek Menon, Michael Straus, George Tomaras +12 more

Monolithic three-dimensional (3D) Paul traps combine the high-precision microfabrication of two-dimensional (2D) chip traps with the deep trapping potentials and low heating rates characteristic of macroscopic 3D Paul traps, which are typically machined by traditional means and mechanically assembled. However, achieving low motional heating rates and optical access with a high numerical aperture (NA) while maintaining the high radio-frequency (RF) voltages required for trapping heavy ionic species, such as Yb$^{+}$ and Ba$^{+}$, remains a significant technical challenge. In this work, we present a fused-silica, monolithic segmented 3D Paul trap with an ion-electrode distance of 250 $μ$m, and stable operation at high RF voltages. We benchmark the performance of the trap using Yb$^{+}$ ions, demonstrating axially homogeneous trapping potentials spanning over 200 $μ$m about the axial center of the trap, high multi-directional optical access (up to 0.7 NA), and radial motional heating as low as $\dot{\bar n}=1.1 \pm 0.1 $ quanta/s at radial trap frequencies about 3 MHz near room temperature. Furthermore, we observe a motional Ramsey coherence time, ${T}_{2}$, of about 95 ms for the radial center-of-mass mode. We demonstrate the generation of a two-qubit Bell state with a parity contrast of ${99.3}^{+0.7} _{-1.5}$% with state preparation and measurement correction. These results establish fused-silica monolithic 3D Paul traps as a scalable, modular platform for quantum simulation, computation, metrology, and networking with heavy ionic species.

quant-pharXiv:2603.16048•Physical Review Applied•Mar 18, 2026•5 citations

On the transport of atomic ions in linear and multidimensional ion trap arrays

David Hucul, Mark Yeo, W. K. Hensinger +3 more

Trapped atomic ions have become one of the most promising architectures for a quantum computer, and current effort is now devoted to the transport of trapped ions through complex segmented ion trap structures in order to scale up to much larger numbers of trapped ion qubits. This paper covers several important issues relevant to ion transport in any type of complex multidimensional rf (Paul) ion trap array. We develop a general theoretical framework for the application of time-dependent electric fields to shuttle laser-cooled ions along any desired trajectory, and describe a method for determining the effect of arbitrary shuttling schedules on the quantum state of trapped ion motion. In addition to the general case of linear shuttling over short distances, we introduce issues particular to the shuttling through multidimensional junctions, which are required for the arbitrary control of the positions of large arrays of trapped ions. This includes the transport of ions around a corner, through a cross or T junction, and the swapping of positions of multiple ions in a laser-cooled crystal. Where possible, we make connections to recent experimental results in a multidimensional T junction trap, where arbitrary 2-dimensional transport was realized.

arXiv:quant-ph/0702175•Quantum Information and Computation•Jul 1, 2008•74 citations

Two-phase driving of a linear radio-frequency ion trap

Santhosh Surendra, Akos Hoffmann, Michael Köhl

A linear radio-frequency Paul trap is traditionally driven with one diagonal pair of electrodes grounded and the other connected to a high-voltage radio-frequency source. This method simplifies impedance matching of the voltage source to the trap. However, for several architectures it leads to increasing the axial micromotion amplitude, for example, when the capacitance between radio-frequency and end-cap electrodes is not negligible. Here, we present a technique to generate two high-voltage radio-frequency signals \SI{180}{\degree} out of phase to drive a linear Paul trap with opposite voltages between neighbouring electrodes. Using this, we have successfully trapped and cooled a chain of Ytterbium ions in a linear radio-frequency Paul trap.

quant-pharXiv:2602.07700•Review of Scientific Instruments•Feb 10, 2026•2 citations
We report on the first demonstration of transport of a multispecies ion crystal through a junction in a rf Paul trap. The trap is a two-dimensional surface-electrode trap with an X\mathsf{X}X junction and segmented control electrodes to which time-varying voltages are applied to control the shape and position of potential wells above the trap surface. We transport either a single 171Yb+{^{171}\mathrm{Yb}}^{+}171Yb+ ion or a crystal composed of a 138Ba+{^{138}\mathrm{Ba}}^{+}138Ba+ ion cotrapped with the 171Yb+{^{171}\mathrm{Yb}}^{+}171Yb+ ion to any port of the junction. We characterize the motional excitation by performing multiple round-trips through the junction and back to the initial well position without cooling. The final excitation is then measured using sideband asymmetry. For a single 171Yb+{^{171}\mathrm{Yb}}^{+}171Yb+ ion, transport with a 4  m/s4\text{ }\text{ }\mathrm{m}/\mathrm{s}4  m/s average speed induces between 0.013\ifmmode±\else\textpm\fi0.0010.013\ifmmode\pm\else\textpm\fi{}0.0010.013\ifmmode±\else\textpm\fi0.001 and 0.014\ifmmode±\else\textpm\fi0.0010.014\ifmmode\pm\else\textpm\fi{}0.0010.014\ifmmode±\else\textpm\fi0.001 quanta of excitation per round-trip, depending on the exit port. For a Ba-Yb crystal, transport at the same speed induces between 0.013\ifmmode±\else\textpm\fi0.0010.013\ifmmode\pm\else\textpm\fi{}0.0010.013\ifmmode±\else\textpm\fi0.001 and 0.030\ifmmode±\else\textpm\fi0.0020.030\ifmmode\pm\else\textpm\fi{}0.0020.030\ifmmode±\else\textpm\fi0.002 quanta per round-trip of excitation to the in-phase axial mode. Excitation in the out-of-phase axial mode ranges from 0.005\ifmmode±\else\textpm\fi0.0010.005\ifmmode\pm\else\textpm\fi{}0.0010.005\ifmmode±\else\textpm\fi0.001 to 0.021\ifmmode±\else\textpm\fi0.0010.021\ifmmode\pm\else\textpm\fi{}0.0010.021\ifmmode±\else\textpm\fi0.001 quanta per round-trip.
Quantum processors based on linear arrays of trapped ions have achieved exceptional performance, but scaling to large qubit numbers requires realizing two-dimensional ion arrays as envisioned in the quantum charge-coupled device (QCCD) architecture. Here, we present a scalable method for the control of ion crystals in a grid-based surface-electrode Paul trap and characterize it in the context of transport operations that sort and reorder multispecies crystals. By combining cowiring of control electrodes at translationally symmetric locations in each grid site with the sitewise ability to exchange the voltages applied to two special electrodes gated by a binary input, site-dependent operations can be achieved using only a fixed number of analog voltage signals and a single digital input per site. In two separate experimental systems containing nominally identical grid traps, one using Yb + 171 − Ba + 138 crystals and the other Ba + 137 − Sr + 88 , we demonstrate this method by characterizing the conditional intrasite crystal reorder and the conditional exchange of ions between adjacent sites on the grid. Averaged across a multisite region of interest, we measure subquanta motional excitation in the axial in-phase and out-of-phase modes of the crystals following these operations at exchange rates of 2.5 kHz. In this initial demonstration, the logic controlling the voltage exchange occurs in software, but the applied signals mimic a proposed hardware implementation using crossover switches. These techniques can be further extended to implement other conditional operations in the QCCD architecture such as gates, initialization, and measurement. Published by the American Physical Society 2024
We describe the construction and operation of a segmented linear Paul trap, fabricated in printed-circuit-board technology with an electrode segment width of 500 μm. We prove the applicability of this technology to reliable ion trapping and report the observation of Doppler-cooled ion crystals of 40 Ca + with this kind of trap. Measured trap frequencies agree with numerical simulations at the level of a few percent from which we infer a high fabrication accuracy of the segmented trap. To demonstrate its usefulness and versatility for trapped ion experiments we study the fast transport of a single ion. Our experimental results show a success rate of 99.0(1)% for a transport distance of 2 × 2 mm in a round-trip time of T = 20 μs, which corresponds to 4 axial oscillations only. We theoretically and experimentally investigate the excitation of oscillations caused by fast ion transports with error-function voltage ramps: for a slightly slower transport (a round-trip shuttle within T = 30 μs) we observe non-adiabatic motional excitation of 0.89(15) meV.
We report the design, fabrication and characterization of a microfabricated surface-electrode ion trap that supports controlled transport through the two-dimensional intersection of linear trapping zones arranged in a 90° cross. The trap is fabricated with very large scalable integration techniques which are compatible with scaling to a large quantum information processor. The shape of the radio-frequency electrodes is optimized with a genetic algorithm to reduce axial pseudopotential barriers and minimize ion heating during transport. Seventy-eight independent dc control electrodes enable fine control of the trapping potentials. We demonstrate reliable ion transport between junction legs and determine the rate of ion loss due to transport. Doppler-cooled ions survive more than 10 5 round-trip transits between junction legs without loss and more than 65 consecutive round trips without laser cooling.
Monolithic three-dimensional (3D) Paul traps combine the high-precision microfabrication of two-dimensional (2D) chip traps with the deep trapping potentials and low heating rates characteristic of macroscopic 3D Paul traps, which are typically machined by traditional means and mechanically assembled. However, achieving low motional heating rates and optical access with a high numerical aperture (NA) while maintaining the high radio-frequency (RF) voltages required for trapping heavy ionic species, such as Yb+^{+}+ and Ba+^{+}+, remains a significant technical challenge. In this work, we present a fused-silica, monolithic segmented 3D Paul trap with an ion-electrode distance of 250 μμμm, and stable operation at high RF voltages. We benchmark the performance of the trap using Yb+^{+}+ ions, demonstrating axially homogeneous trapping potentials spanning over 200 μμμm about the axial center of the trap, high multi-directional optical access (up to 0.7 NA), and radial motional heating as low as $\dot{\bar n}=1.1 \pm 0.1 $ quanta/s at radial trap frequencies about 3 MHz near room temperature. Furthermore, we observe a motional Ramsey coherence time, T2{T}_{2}T2​, of about 95 ms for the radial center-of-mass mode. We demonstrate the generation of a two-qubit Bell state with a parity contrast of 99.3−1.5+0.7{99.3}^{+0.7} _{-1.5}99.3−1.5+0.7​% with state preparation and measurement correction. These results establish fused-silica monolithic 3D Paul traps as a scalable, modular platform for quantum simulation, computation, metrology, and networking with heavy ionic species.
Trapped atomic ions have become one of the most promising architectures for a quantum computer, and current effort is now devoted to the transport of trapped ions through complex segmented ion trap structures in order to scale up to much larger numbers of trapped ion qubits. This paper covers several important issues relevant to ion transport in any type of complex multidimensional rf (Paul) ion trap array. We develop a general theoretical framework for the application of time-dependent electric fields to shuttle laser-cooled ions along any desired trajectory, and describe a method for determining the effect of arbitrary shuttling schedules on the quantum state of trapped ion motion. In addition to the general case of linear shuttling over short distances, we introduce issues particular to the shuttling through multidimensional junctions, which are required for the arbitrary control of the positions of large arrays of trapped ions. This includes the transport of ions around a corner, through a cross or T junction, and the swapping of positions of multiple ions in a laser-cooled crystal. Where possible, we make connections to recent experimental results in a multidimensional T junction trap, where arbitrary 2-dimensional transport was realized.
A linear radio-frequency Paul trap is traditionally driven with one diagonal pair of electrodes grounded and the other connected to a high-voltage radio-frequency source. This method simplifies impedance matching of the voltage source to the trap. However, for several architectures it leads to increasing the axial micromotion amplitude, for example, when the capacitance between radio-frequency and end-cap electrodes is not negligible. Here, we present a technique to generate two high-voltage radio-frequency signals \SI{180}{\degree} out of phase to drive a linear Paul trap with opposite voltages between neighbouring electrodes. Using this, we have successfully trapped and cooled a chain of Ytterbium ions in a linear radio-frequency Paul trap.