Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2206.06897 · IEEE Globecom Workshops (GC Wkshps)

On the Message Passing Efficiency of Polar and Low-Density Parity-Check Decoders

Dawei Yin, Yuan Liy, Xianbin Wang, Jiajie Tong, Huazi Zhang, Jun Wang, Guanghui Wang, Guiying Yan, Zhi-Ming Ma

Published Dec 4, 2022• 5 citations
arXivHTMLPDF

Abstract

This study focuses on the efficiency of message-passing-based decoding algorithms for polar and low-density parity-check (LDPC) codes. Both successive cancellation (SC) and belief propagation (BP) decoding algorithms are studied under the message-passing framework. Counter-intuitively, SC decoding demonstrates the highest decoding efficiency although it was considered a weak decoder regarding error-correction performance. We analyze the complexity-performance tradeoff to dynamically track the decoding efficiency, where the complexity is measured by the number of messages passed (NMP), and the performance is measured by the statistical distance to the maximum a posteriori (MAP) estimate. This study offers new insight into the contribution of each message passing in decoding, and compares various decoding algorithms on a message-by-message level.

DOI
10.1109/gcwkshps56602.2022.10008677

Related papers

One and Two Bit Message Passing for SC-LDPC Codes With Higher-Order Modulation

Fabian Steiner, Emna Ben Yacoub, Balazs Matuz +2 more

Low complexity decoding algorithms are necessary to meet data rate requirements in excess of 1 Tbps. In this paper, we study one and two bit message passing algorithms for belief propagation decoding of low-density parity-check (LDPC) codes and analyze them by density evolution. The variable nodes (VNs) exploit soft information from the channel output. To decrease the data flow, the messages exchanged between check nodes (CNs) and VNs are represented by one or two bits. The newly proposed quaternary message passing (QMP) algorithm is compared asymptotically and in finite length simulations to binary message passing (BMP) and ternary message passing (TMP) for spectrally efficient communication with higher-order modulation and probabilistic amplitude shaping (PAS). To showcase the potential for high throughput forward error correction, spatially coupled LDPC codes and a target spectral efficiency (SE) of 3 bits/QAM symbol are considered. Gains of about 0.7 dB and 0.1 dB are observed compared to BMP and TMP, respectively. The gap to unquantized belief propagation (BP) decoding is reduced to about 0.75 dB. For smaller code rates, the gain of QMP compared to TMP is more pronounced and amounts to 0.24 dB in the considered example.

arXiv:1902.10391•Journal of Lightwave Technology•Sep 24, 2019•23 citations

Finite alphabet iterative decoders for LDPC codes surpassing floating-point iterative decoders

Shiva Kumar Planjery, David Declercq, Ludovic Danjean +1 more

Introduced is a new type of message-passing (MP) decoders for low-density parity-check (LDPC) codes over the binary symmetric channel. Unlike traditional belief propagation (BP) based MP algorithms which propagate probabilities or log-likelihoods, the new MP decoders propagate messages requiring only a finite number of bits for their representation in such a way that good performance in the error floor region is ensured. Additionally, these messages are not quantised probabilities or log-likelihoods. As examples, MP decoders are provided that require only three bits for message representation, but surpass the floating-point BP (which requires a large number of bits for representation) in the error-floor region.

Electronics Letters•Aug 4, 2011•27 citations

A Differential Binary Message-Passing LDPC Decoder

Nastaran Mobini, Amir H. Banihashemi, Saied Hemati

In this paper, we propose a binary message-passing algorithm for decoding low-density parity-check (LDPC) codes. The algorithm substantially improves the performance of purely hard-decision iterative algorithms with a small increase in the memory requirements and the computational complexity. We associate a reliability value to each nonzero element of the code's parity-check matrix, and differentially modify this value in each iteration based on the sum of the extrinsic binary messages from the check nodes. For the tested random and finite-geometry LDPC codes, the proposed algorithm can achieve performance as close as 1.3 dB and 0.7 dB to that of belief propagation (BP) at the error rates of interest, respectively. This is while, unlike BP, the algorithm does not require the estimation of channel signal to noise ratio. Low memory and computational requirements and binary message-passing make the proposed algorithm attractive for high-speed low-power applications.

Globecom•Nov 1, 2007•16 citations

Efficient Message Passing Decoding Using Vector-based Messages

Mikael Grimnell, Mats Tjäder

The family of Low Density Parity Check (LDPC) codes is a strong candidate to be used as Forward Error Correction (FEC) in future communication systems due to its strong error correction capability. Most LDPC decoders use the Message Passing algorithm for decoding, which is an iterative algorithm that passes messages between its variable nodes and check nodes. It is not until recently that computation power has become strong enough to make Message Passing on LDPC codes feasible. Although locally simple, the LDPC codes are usually large, which increases the required computation power. Earlier work on LDPC codes has been concentrated on the binary Galois Field, GF(2), but it has been shown that codes from higher order fields have better error correction capability. However, the most efficient LDPC decoder, the Belief Propagation Decoder, has a squared complexity increase when moving to higher order Galois Fields. Transmission over a channel with M-PSK signalling is a common technique to increase spectral efficiency. The information is transmitted as the phase angle of the signal. The focus in this Master’s Thesis is on simplifying the Message Passing decoding when having inputs from M-PSK signals transmitted over an AWGN channel. Symbols from higher order Galois Fields were mapped to M-PSK signals, since M-PSK is very bandwidth efficient and the information can be found in the angle of the signal. Several simplifications of the Belief Propagation has been developed and tested. The most promising is the Table Vector Decoder, which is a Message Passing Decoder that uses a table lookup technique for check node operations and vector summation as variable node operations. The table lookup is used to approximate the check node operation in a Belief Propagation decoder. Vector summation is used as an equivalent operation to the variable node operation. Monte Carlo simulations have shown that the Table Vector Decoder can achieve a performance close to the Belief Propagation. The capability of the Table Vector Decoder depends on the number of reconstruction points and the placement of them. The main advantage of the Table Vector Decoder is that its complexity is unaffected by the Galois Field used. Instead, there will be a memory space requirement which depends on the desired number of reconstruction points.

•Jan 1, 2005•1 citation

A comprehensive Study of Decoding Algorithms for Low Density Parity-Check(LDPC)

C S Anil Kumar, M Vedhashri, L Vanditha +2 more

The near-capacity performance and effective decoding algorithms of Low-Density Parity-Check (LDPC) codes have made them a mainstay of contemporary error correction. With an emphasis on iterative techniques like the Belief Propagation (BP) algorithm, the Min-Sum algorithm, and their variations, this paper offers a thorough analysis of decoding algorithms for LDPC codes. We investigate the trade-offs between various algorithmic techniques’ computational complexity, decoding latency, and error correction performance. Particular focus is placed on new methods and hardware-friendly algorithms that are tailored for next-generation communication systems, such 5 G and beyond.

International Conference on Knowledge Engineering and Communication Systems (ICKECS)•Apr 28, 2025•0 citations

A differential binary message-passing LDPC decoder

Nastaran Mobini, A.H. Banihashemi, Saied Hemati

In this paper, we propose a binary message-passing algorithm for decoding low-density parity-check (LDPC) codes. The algorithm substantially improves the performance of purely hard-decision iterative algorithms with a small increase in the memory requirements and the computational complexity. We associate a reliability value to each nonzero element of the code's parity-check matrix, and differentially modify this value in each iteration based on the sum of the extrinsic binary messages from the check nodes. For the tested random and finitegeometry LDPC codes, the proposed algorithm can perform as close as about 1 dB and 0.5 dB to belief propagation (BP) at the error rates of interest, respectively. This is while, unlike BP, the algorithm does not require the estimation of channel signal to noise ratio. Low memory and computational requirements and binary message-passing make the proposed algorithm attractive for high-speed low-power applications.

IEEE Transactions on Communications•Sep 1, 2009•32 citations
This study focuses on the efficiency of message-passing-based decoding algorithms for polar and low-density parity-check (LDPC) codes. Both successive cancellation (SC) and belief propagation (BP) decoding algorithms are studied under the message-passing framework. Counter-intuitively, SC decoding demonstrates the highest decoding efficiency although it was considered a weak decoder regarding error-correction performance. We analyze the complexity-performance tradeoff to dynamically track the decoding efficiency, where the complexity is measured by the number of messages passed (NMP), and the performance is measured by the statistical distance to the maximum a posteriori (MAP) estimate. This study offers new insight into the contribution of each message passing in decoding, and compares various decoding algorithms on a message-by-message level.
Low complexity decoding algorithms are necessary to meet data rate requirements in excess of 1 Tbps. In this paper, we study one and two bit message passing algorithms for belief propagation decoding of low-density parity-check (LDPC) codes and analyze them by density evolution. The variable nodes (VNs) exploit soft information from the channel output. To decrease the data flow, the messages exchanged between check nodes (CNs) and VNs are represented by one or two bits. The newly proposed quaternary message passing (QMP) algorithm is compared asymptotically and in finite length simulations to binary message passing (BMP) and ternary message passing (TMP) for spectrally efficient communication with higher-order modulation and probabilistic amplitude shaping (PAS). To showcase the potential for high throughput forward error correction, spatially coupled LDPC codes and a target spectral efficiency (SE) of 3 bits/QAM symbol are considered. Gains of about 0.7 dB and 0.1 dB are observed compared to BMP and TMP, respectively. The gap to unquantized belief propagation (BP) decoding is reduced to about 0.75 dB. For smaller code rates, the gain of QMP compared to TMP is more pronounced and amounts to 0.24 dB in the considered example.
Introduced is a new type of message-passing (MP) decoders for low-density parity-check (LDPC) codes over the binary symmetric channel. Unlike traditional belief propagation (BP) based MP algorithms which propagate probabilities or log-likelihoods, the new MP decoders propagate messages requiring only a finite number of bits for their representation in such a way that good performance in the error floor region is ensured. Additionally, these messages are not quantised probabilities or log-likelihoods. As examples, MP decoders are provided that require only three bits for message representation, but surpass the floating-point BP (which requires a large number of bits for representation) in the error-floor region.
In this paper, we propose a binary message-passing algorithm for decoding low-density parity-check (LDPC) codes. The algorithm substantially improves the performance of purely hard-decision iterative algorithms with a small increase in the memory requirements and the computational complexity. We associate a reliability value to each nonzero element of the code's parity-check matrix, and differentially modify this value in each iteration based on the sum of the extrinsic binary messages from the check nodes. For the tested random and finite-geometry LDPC codes, the proposed algorithm can achieve performance as close as 1.3 dB and 0.7 dB to that of belief propagation (BP) at the error rates of interest, respectively. This is while, unlike BP, the algorithm does not require the estimation of channel signal to noise ratio. Low memory and computational requirements and binary message-passing make the proposed algorithm attractive for high-speed low-power applications.
The family of Low Density Parity Check (LDPC) codes is a strong candidate to be used as Forward Error Correction (FEC) in future communication systems due to its strong error correction capability. Most LDPC decoders use the Message Passing algorithm for decoding, which is an iterative algorithm that passes messages between its variable nodes and check nodes. It is not until recently that computation power has become strong enough to make Message Passing on LDPC codes feasible. Although locally simple, the LDPC codes are usually large, which increases the required computation power. Earlier work on LDPC codes has been concentrated on the binary Galois Field, GF(2), but it has been shown that codes from higher order fields have better error correction capability. However, the most efficient LDPC decoder, the Belief Propagation Decoder, has a squared complexity increase when moving to higher order Galois Fields. Transmission over a channel with M-PSK signalling is a common technique to increase spectral efficiency. The information is transmitted as the phase angle of the signal. The focus in this Master’s Thesis is on simplifying the Message Passing decoding when having inputs from M-PSK signals transmitted over an AWGN channel. Symbols from higher order Galois Fields were mapped to M-PSK signals, since M-PSK is very bandwidth efficient and the information can be found in the angle of the signal. Several simplifications of the Belief Propagation has been developed and tested. The most promising is the Table Vector Decoder, which is a Message Passing Decoder that uses a table lookup technique for check node operations and vector summation as variable node operations. The table lookup is used to approximate the check node operation in a Belief Propagation decoder. Vector summation is used as an equivalent operation to the variable node operation. Monte Carlo simulations have shown that the Table Vector Decoder can achieve a performance close to the Belief Propagation. The capability of the Table Vector Decoder depends on the number of reconstruction points and the placement of them. The main advantage of the Table Vector Decoder is that its complexity is unaffected by the Galois Field used. Instead, there will be a memory space requirement which depends on the desired number of reconstruction points.
The near-capacity performance and effective decoding algorithms of Low-Density Parity-Check (LDPC) codes have made them a mainstay of contemporary error correction. With an emphasis on iterative techniques like the Belief Propagation (BP) algorithm, the Min-Sum algorithm, and their variations, this paper offers a thorough analysis of decoding algorithms for LDPC codes. We investigate the trade-offs between various algorithmic techniques’ computational complexity, decoding latency, and error correction performance. Particular focus is placed on new methods and hardware-friendly algorithms that are tailored for next-generation communication systems, such 5 G and beyond.
In this paper, we propose a binary message-passing algorithm for decoding low-density parity-check (LDPC) codes. The algorithm substantially improves the performance of purely hard-decision iterative algorithms with a small increase in the memory requirements and the computational complexity. We associate a reliability value to each nonzero element of the code's parity-check matrix, and differentially modify this value in each iteration based on the sum of the extrinsic binary messages from the check nodes. For the tested random and finitegeometry LDPC codes, the proposed algorithm can perform as close as about 1 dB and 0.5 dB to belief propagation (BP) at the error rates of interest, respectively. This is while, unlike BP, the algorithm does not require the estimation of channel signal to noise ratio. Low memory and computational requirements and binary message-passing make the proposed algorithm attractive for high-speed low-power applications.