Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2206.00715 · Physical review. B./Physical review. B

Hybrid ferromagnetic transmon qubit: Circuit design, feasibility, and detection protocols for magnetic fluctuations

Halima Giovanna Ahmad, Valentina Brosco, Alessandro Miano, Luigi Di Palma, M. Arzeo, Domenico Montemurro, Procolo Lucignano, Giovanni Piero Pepe, Francesco Tafuri, Rosario Fazio, D. Massarotti

Published Jun 24, 2022• 35 citations
arXivHTMLPDF

Abstract

We propose to exploit currently available tunnel ferromagnetic Josephson junctions to realize a hybrid superconducting qubit. We show that the characteristic hysteretic behavior of the ferromagnetic barrier provides an alternative and intrinsically digital tuning of the qubit frequency by means of magnetic field pulses. To illustrate functionalities and limitation of the device, we discuss the coupling to a readout resonator and the effect of magnetic fluctuations. The possibility to use the qubit as a noise detector and its relevance to investigate the subtle interplay of magnetism and superconductivity is envisaged.

DOI
10.1103/physrevb.105.214522

Related papers

A feasible path for the use of ferromagnetic josephson junctions in quantum circuits: The ferro-transmon

D. Massarotti, Halima Giovanna Ahmad, Roberta Satariano +18 more

We discuss the capabilities of ferromagnetic (F) Josephson junctions (JJs) in a variety of layouts and configurations. The main goal is to demonstrate the potential of these hybrid JJs to disclose new physics and the possibility to integrate them in superconducting classical and quantum electronics for various applications. The feasible path towards the use of ferromagnetic Josephson junctions in quantum circuits starts from experiments demonstrating macroscopic quantum tunneling in NbN/GdN/NbN junctions with ferro-insulator barriers and with triplet components of the supercurrent, supported by a self-consistent electrodynamic characterization as a function of the barrier thickness. This has inspired further studies on tunnel ferromagnetic junctions with a different layout and promoted the first generation of ferromagnetic Al-based JJs, specifically Al/AlOx/Al/Py/Al. This layout takes advantage of the capability to integrate the ferromagnetic layer in the junction without affecting the quality of the superconducting electrodes and of the tunnel barrier. The high quality of the devices paves the way for the possible implementation of Al tunnel-ferromagnetic JJs in superconducting quantum circuits. These achievements have promoted the notion of a novel type of qubit incorporating ferromagnetic JJs. This qubit is based on a transmon design featuring a tunnel JJ in parallel with a ferromagnetic JJ inside a SQUID loop capacitively coupled to a superconducting readout resonator. The effect of an external RF field on the magnetic switching processes of ferromagnetic JJs has been also investigated.

Low Temperature Physics•Jul 1, 2023•14 citations

Towards Novel Tunability Schemes for Hybrid Ferromagnetic Transmon Qubits

Halima Giovanna Ahmad, Raffaella Ferraiuolo, Giuseppe Serpico +12 more

Flux tuning of qubit frequencies in superconducting quantum processors is fundamental for implementing single and multi-qubit gates in quantum algorithms. Typical architectures involve the use of DC or fast RF lines. However, these lines introduce significant heat dissipation and undesirable decoherence mechanisms, leading to a severe bottleneck for scalability. Among different solutions to overcome this issue, we propose integrating tunnel Superconductor-Insulating-thin superconducting interlayer-Ferromagnet-Superconductor Josephson junctions (SIsFS JJs) into a novel transmon qubit design, the so-called ferrotransmon. SIsFS JJs provide memory properties due to the presence of ferromagnetic barriers and preserve at the same time the low-dissipative behavior of tunnel-insulating JJs, thus promoting an alternative tuning of the qubit frequency. In this work, we discuss the fundamental steps towards the implementation of this hybrid ferromagnetic transmon. We will give a special focus on the design, simulations, and preliminary experimental characterization of superconducting lines to provide in-plane magnetic fields, fundamental for an on-chip control of the qubit frequencies in the ferrotransmon.

arXiv:2412.06562•IEEE Transactions on Applied Superconductivity•Jan 28, 2025•4 citations

Competition of Quasiparticles and Magnetization Noise in Hybrid Ferromagnetic Transmon Qubits

Halima Giovanna Ahmad, Valentina Brosco, Alessandro Miano +14 more

The coexistence between ferromagnetic ordering and superconducting transport in tunnel ferromagnetic Josephson junctions (SFS JJs) accounts for a wide range of unconventional physical properties. The integration of both insulating ferromagnets or multi-layered insulator-ferromagnet barriers allows to combine ferromagnetic switching properties with peculiar low quasiparticle dissipation, which could enhance the capabilities of SFS JJs as active elements in quantum circuits. Here we show that split-transmon qubits based on tunnel ferromagnetic JJs realize an ideal playground to study noise fluctuations in ferromagnetic Josephson devices. By considering the transport properties of measured Al-based tunnel SFS JJs, we report on a theoretical study of the competition between intrinsic magnetization fluctuations in the barrier and quasiparticles dissipation, thus providing specific operation regimes to identify and disentangle the two noise sources, depending on the peculiar properties of the F layer and F/S interface.

IEEE Transactions on Applied Superconductivity•Feb 8, 2023•8 citations

Ferromagnetic Josephson Junctions for High Performance Computation

Roberta Caruso, D. Massarotti, Alessandro Miano +8 more

Josephson junctions drive the operation of superconducting qubits and they are the key for the coupling and the interfacing of superconducting qubit components with other quantum platforms. They are the only means to introduce non linearity in a superconducting circuit and offer direct solutions to tune the properties of a superconducting qubit, thus enlarging the possible qubit layouts. Junctions performances and tunability can take advantage of using a large variety of barriers and their special functionalities. We mention pertinent results on the advances in understanding the properties of ferromagnetic junctions, which makepossible the use of these devices either as memory elements and as core circuit elements.

Italian Quantum Information Science Conference (IQIS)•Jun 25, 2019•0 citations

Gatemon qubit revisited for improved reliability and stability

David Feldstein-Bofill, Zhenhai Sun, Casper Wied +6 more

The development of quantum circuits based on hybrid superconductor-semiconductor Josephson junctions holds promise for exploring their mesoscopic physics and for building innovative superconducting devices. The gate-tunable superconducting transmon qubit (gatemon) is the paradigmatic example of such a superconducting circuit; however, gatemons typically suffer from unstable and hysteretic qubit frequencies with respect to the applied gate voltage and reduced coherence times compared to conventional transmons fabricated from aluminum-oxide-based Josephson junctions. Here, we develop methods for characterizing these challenges in gatemons and deploy these methods to compare the impact of shunt-capacitor designs on gatemon performance. Our results indicate a strong frequency- and design-dependent behavior of the qubit stability, hysteresis, and dephasing times. Moreover, we achieve highly reliable tuning of the qubit frequency with 1-MHz precision over a range of several gigahertz, along with improved stability in grounded gatemons compared to gatemons with a floating capacitor design.

arXiv:2412.11611•Physical Review Applied•Sep 30, 2025•7 citations

Studies of Quantum Transitions of Magnetic Flux in a RF Squid Qubit

Luigi Longobardi

At low temperature and low damping, the magnetic flux of a rf Superconducting QUantum Interference Device (SQUID) acts as a macroscopic quantum variable whose dynamic is described by a double well potential. A rf SQUID consists of a superconducting loop interrupted by a thin insulating barrier, known as a Josephson junction. The modified rf SQUID design discussed in this thesis has independent, in situ, controls that allow varying the barrier height between the potential wells and their relative tilt. This high level of control of the potential together with the capability to implement an experimental setup optimized to reduce coupling to external sources of noise, made this system ideal not only for tests of quantum transition at a macroscopic level, but also as a scalable solid state device for quantum computation. A variety of measurements of quantum phenomena are reported in this thesis, including microwave level spectroscopy, coherent oscillations, and macroscopic resonant tunneling (MRT). These measurements are compared with theoretical models to study the possible sources of decoherence in a rf SQUID qubit. The analysis confirmed that the main source of decoherence is not due to coupling to the external environment, but it can be linked to intrinsic low frequency flux noise. Work from many groups over the last several years has shown that the performance of a superconductive qubit is limited by coupling to spurious defects in the materials used for the device fabrication. In this work we analyze the possibility of using the MRT as a tool for future studies of effects of materials and fabrication process in the realization of improved qubits, and we also explore the feasibility for measurements of quantum phenomena that involve fast pulsing of the potential barrier height.

•Oct 22, 2010•0 citations
We propose to exploit currently available tunnel ferromagnetic Josephson junctions to realize a hybrid superconducting qubit. We show that the characteristic hysteretic behavior of the ferromagnetic barrier provides an alternative and intrinsically digital tuning of the qubit frequency by means of magnetic field pulses. To illustrate functionalities and limitation of the device, we discuss the coupling to a readout resonator and the effect of magnetic fluctuations. The possibility to use the qubit as a noise detector and its relevance to investigate the subtle interplay of magnetism and superconductivity is envisaged.
We discuss the capabilities of ferromagnetic (F) Josephson junctions (JJs) in a variety of layouts and configurations. The main goal is to demonstrate the potential of these hybrid JJs to disclose new physics and the possibility to integrate them in superconducting classical and quantum electronics for various applications. The feasible path towards the use of ferromagnetic Josephson junctions in quantum circuits starts from experiments demonstrating macroscopic quantum tunneling in NbN/GdN/NbN junctions with ferro-insulator barriers and with triplet components of the supercurrent, supported by a self-consistent electrodynamic characterization as a function of the barrier thickness. This has inspired further studies on tunnel ferromagnetic junctions with a different layout and promoted the first generation of ferromagnetic Al-based JJs, specifically Al/AlOx/Al/Py/Al. This layout takes advantage of the capability to integrate the ferromagnetic layer in the junction without affecting the quality of the superconducting electrodes and of the tunnel barrier. The high quality of the devices paves the way for the possible implementation of Al tunnel-ferromagnetic JJs in superconducting quantum circuits. These achievements have promoted the notion of a novel type of qubit incorporating ferromagnetic JJs. This qubit is based on a transmon design featuring a tunnel JJ in parallel with a ferromagnetic JJ inside a SQUID loop capacitively coupled to a superconducting readout resonator. The effect of an external RF field on the magnetic switching processes of ferromagnetic JJs has been also investigated.
Flux tuning of qubit frequencies in superconducting quantum processors is fundamental for implementing single and multi-qubit gates in quantum algorithms. Typical architectures involve the use of DC or fast RF lines. However, these lines introduce significant heat dissipation and undesirable decoherence mechanisms, leading to a severe bottleneck for scalability. Among different solutions to overcome this issue, we propose integrating tunnel Superconductor-Insulating-thin superconducting interlayer-Ferromagnet-Superconductor Josephson junctions (SIsFS JJs) into a novel transmon qubit design, the so-called ferrotransmon. SIsFS JJs provide memory properties due to the presence of ferromagnetic barriers and preserve at the same time the low-dissipative behavior of tunnel-insulating JJs, thus promoting an alternative tuning of the qubit frequency. In this work, we discuss the fundamental steps towards the implementation of this hybrid ferromagnetic transmon. We will give a special focus on the design, simulations, and preliminary experimental characterization of superconducting lines to provide in-plane magnetic fields, fundamental for an on-chip control of the qubit frequencies in the ferrotransmon.
The coexistence between ferromagnetic ordering and superconducting transport in tunnel ferromagnetic Josephson junctions (SFS JJs) accounts for a wide range of unconventional physical properties. The integration of both insulating ferromagnets or multi-layered insulator-ferromagnet barriers allows to combine ferromagnetic switching properties with peculiar low quasiparticle dissipation, which could enhance the capabilities of SFS JJs as active elements in quantum circuits. Here we show that split-transmon qubits based on tunnel ferromagnetic JJs realize an ideal playground to study noise fluctuations in ferromagnetic Josephson devices. By considering the transport properties of measured Al-based tunnel SFS JJs, we report on a theoretical study of the competition between intrinsic magnetization fluctuations in the barrier and quasiparticles dissipation, thus providing specific operation regimes to identify and disentangle the two noise sources, depending on the peculiar properties of the F layer and F/S interface.
Josephson junctions drive the operation of superconducting qubits and they are the key for the coupling and the interfacing of superconducting qubit components with other quantum platforms. They are the only means to introduce non linearity in a superconducting circuit and offer direct solutions to tune the properties of a superconducting qubit, thus enlarging the possible qubit layouts. Junctions performances and tunability can take advantage of using a large variety of barriers and their special functionalities. We mention pertinent results on the advances in understanding the properties of ferromagnetic junctions, which makepossible the use of these devices either as memory elements and as core circuit elements.
The development of quantum circuits based on hybrid superconductor-semiconductor Josephson junctions holds promise for exploring their mesoscopic physics and for building innovative superconducting devices. The gate-tunable superconducting transmon qubit (gatemon) is the paradigmatic example of such a superconducting circuit; however, gatemons typically suffer from unstable and hysteretic qubit frequencies with respect to the applied gate voltage and reduced coherence times compared to conventional transmons fabricated from aluminum-oxide-based Josephson junctions. Here, we develop methods for characterizing these challenges in gatemons and deploy these methods to compare the impact of shunt-capacitor designs on gatemon performance. Our results indicate a strong frequency- and design-dependent behavior of the qubit stability, hysteresis, and dephasing times. Moreover, we achieve highly reliable tuning of the qubit frequency with 1-MHz precision over a range of several gigahertz, along with improved stability in grounded gatemons compared to gatemons with a floating capacitor design.
At low temperature and low damping, the magnetic flux of a rf Superconducting QUantum Interference Device (SQUID) acts as a macroscopic quantum variable whose dynamic is described by a double well potential. A rf SQUID consists of a superconducting loop interrupted by a thin insulating barrier, known as a Josephson junction. The modified rf SQUID design discussed in this thesis has independent, in situ, controls that allow varying the barrier height between the potential wells and their relative tilt. This high level of control of the potential together with the capability to implement an experimental setup optimized to reduce coupling to external sources of noise, made this system ideal not only for tests of quantum transition at a macroscopic level, but also as a scalable solid state device for quantum computation. A variety of measurements of quantum phenomena are reported in this thesis, including microwave level spectroscopy, coherent oscillations, and macroscopic resonant tunneling (MRT). These measurements are compared with theoretical models to study the possible sources of decoherence in a rf SQUID qubit. The analysis confirmed that the main source of decoherence is not due to coupling to the external environment, but it can be linked to intrinsic low frequency flux noise. Work from many groups over the last several years has shown that the performance of a superconductive qubit is limited by coupling to spurious defects in the materials used for the device fabrication. In this work we analyze the possibility of using the MRT as a tool for future studies of effects of materials and fabrication process in the realization of improved qubits, and we also explore the feasibility for measurements of quantum phenomena that involve fast pulsing of the potential barrier height.