Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2204.11114

Quantum Error Detection Without Using Ancilla Qubits

Nicolas J. Guerrero, David E. Weeks

Published Apr 23, 2022• 0 citations
arXivHTMLPDF

Abstract

In this paper, we describe and experimentally demonstrate an error detection scheme that does not employ ancilla qubits or mid-circuit measurements. This is achieved by expanding the Hilbert space where a single logical qubit is encoded using several physical qubits. For example, one possible two qubit encoding identifies $|0\rangle_L=|01\rangle$ and $|1\rangle_L=|10\rangle$. If during the final measurement a $|11\rangle$ or $|00\rangle$ is observed an error is declared and the run is not included in subsequent analysis. We provide codewords for a simple bit-flip encoding, a way to encode the states, a way to implement logical $U_3$ and logical $C_x$ gates, and a description of which errors can be detected. We then run Greenberger-Horne-Zeilinger circuits on the transmon based IBM quantum computers, with an input space of $N\in\{2,3,4,5\}$ logical qubits and $Q\in\{1,2,3,4,5\}$ physical qubits per logical qubit. The results are compared relative to $Q=1$ with and without error detection and we find a significant improvement for $Q\in\{2,3,4\}$.

DOI
10.48550/arxiv.2204.11114

Related papers

Real-time measurement error mitigation for one-way quantum computation

Tobias Hartung, S. Schuster, Joachim von Zanthier +1 more

Abstract We propose a quantum error mitigation scheme for single-qubit measurement errors, particularly suited for one-way quantum computation. Contrary to well established error mitigation methods for circuit-based quantum computation that require the circuits to be run several times, our method is capable of mitigating measurement errors in real time during the processing measurements in the one-way computation. For that, an ancillary qubit register is entangled with the to-be-measured qubit and additionally measured afterwards. By using a voting protocol on all measurement outcomes, occurring measurement errors can be mitigated in real time while the one-way computation continues. We provide an analytical expression for the probability to detect a measurement error depending on the error rate and the number of ancilla qubits. From this, we derive an estimate of the ancilla register size for a given measurement error rate and a required success probability to detect a measurement error. Additionally, we consider the CNOT gate error in our mitigation method and investigate how this influences the probability to detect a measurement error. Finally, we show in proof-of-principle simulations and in experiments executed on IBM quantum hardware that our method is capable of reducing the measurement errors significantly in a one-way quantum computation with only a small number of ancilla qubits.

arXiv:2411.09084•Scientific Reports•Sep 19, 2026•0 citations

Detecting bit-flip errors in a logical qubit using stabilizer measurements

Diego Ristè, Stefano Poletto, Meng-Zi Huang +4 more

Quantum data are susceptible to decoherence induced by the environment and to errors in the hardware processing it. A future fault-tolerant quantum computer will use quantum error correction to actively protect against both. In the smallest error correction codes, the information in one logical qubit is encoded in a two-dimensional subspace of a larger Hilbert space of multiple physical qubits. For each code, a set of non-demolition multi-qubit measurements, termed stabilizers, can discretize and signal physical qubit errors without collapsing the encoded information. Here using a five-qubit superconducting processor, we realize the two parity measurements comprising the stabilizers of the three-qubit repetition code protecting one logical qubit from physical bit-flip errors. While increased physical qubit coherence times and shorter quantum error correction blocks are required to actively safeguard the quantum information, this demonstration is a critical step towards larger codes based on multiple parity measurements.

arXiv:1411.5542•Nature Communications•Apr 29, 2015•265 citations

Demonstration of measurement-free universal logical quantum computation

Friederike Butt, Ivan Pogorelov, Robert S. Freund +4 more

The ability to perform quantum error correction (QEC) and robust gate operations on encoded qubits opens the door to demonstrations of quantum algorithms. Contemporary QEC schemes typically require mid-circuit measurements with feed-forward control, which are challenging for qubit control, often slow, and susceptible to relatively high error rates. In this work, we propose and experimentally demonstrate a universal toolbox of fault-tolerant logical operations on error-detecting codes without mid-circuit measurements on a trapped-ion quantum processor. We present modular logical state teleportation between two four-qubit error-detecting codes without measurements during algorithm execution. Moreover, we realize a fault-tolerant universal gate set on an eight-qubit error-detecting code hosting three logical qubits, based on state injection, which can be executed by coherent gate operations only. We apply this toolbox to experimentally realize Grover's quantum search algorithm fault-tolerantly on three logical qubits encoded in eight physical qubits, with the implementation displaying clear identification of the desired solution states. Our work demonstrates the practical feasibility and provides first steps into the largely unexplored direction of measurement-free quantum computation.

Nature Communications•Jan 26, 2026•8 citations

Error mitigation for variational quantum algorithms through mid-circuit measurements

Ludmila Botelho, Adam Glos, Akash Kundu +3 more

Noisy intermediate-scale quantum algorithms require novel paradigms of error mitigation. To obtain noise-robust quantum computers, each logical qubit is equipped with hundreds or thousands of physical qubits. However, it is not possible to use memory-consuming techniques for current quantum devices having at most hundreds or thousands of physical qubits on their own. For specific problems, valid quantum states have a unique structure as in the case of Fock states and $W$ states where the Hamming weight is fixed, and the evolution takes place in a smaller subspace of the full Hilbert space. With this preknowledge, some errors can be detected during the evolution of the circuit, by filtering the states not obeying the pattern through postselection. In this paper, we present mid-circuit postselection schemes for frequently used encodings such as one-hot, binary, gray, and domain-wall encoding. For the particular subspace of one-hot states, we propose a method that works by compressing the full Hilbert space to a smaller subspace, allowing projecting to the desired subspace without using any ancilla qubits. We demonstrate the effectiveness of the approach for the quantum alternating operator ansatz algorithm. Our method is particularly suitable for the currently available hardware, where measuring and resetting are possible, but classical conditional operators are not.

arXiv:2108.10927•Physical Review A•Feb 28, 2022•65 citations

Fault-tolerant detection of a quantum error

Serge Rosenblum, P. Reinhold, Mazyar Mirrahimi +3 more

A critical component of any quantum error-correcting scheme is detection of errors by using an ancilla system. However, errors occurring in the ancilla can propagate onto the logical qubit, irreversibly corrupting the encoded information. We demonstrate a fault-tolerant error-detection scheme that suppresses spreading of ancilla errors by a factor of 5, while maintaining the assignment fidelity. The same method is used to prevent propagation of ancilla excitations, increasing the logical qubit dephasing time by an order of magnitude. Our approach is hardware-efficient, as it uses a single multilevel transmon ancilla and a cavity-encoded logical qubit, whose interaction is engineered in situ by using an off-resonant sideband drive. The results demonstrate that hardware-efficient approaches that exploit system-specific error models can yield advances toward fault-tolerant quantum computation.

arXiv:1803.00102•Science•Jul 19, 2018•188 citations

Achieving Computational Gains with Quantum Error-Correction Primitives: Generation of Long-Range Entanglement Enhanced by Error Detection

Haoran Liao, Gavin S. Hartnett, Ashish Kakkar +5 more

The resource overhead required to achieve net computational benefits from quantum error correction (QEC) limits its utility while current systems remain constrained in size, despite exceptional progress in experimental demonstrations. In this paper, we demonstrate that the strategic application of QEC primitives without logical encoding can yield significant advantages on superconducting processors—relative to any alternative error-reduction strategy—while only requiring a modest overhead. We first present a novel protocol for implementing long-range gates that relies on a unitarily prepared Greenberger-Horne-Zeilinger (GHZ) state as well as a unitary disentangling step; the protocol natively introduces an error-detection process using the disentangled qubits as flags. We demonstrate that it achieves state-of-the-art gate fidelities of over 85% across up to 40 lattice sites, significantly and consistently outperforming the best alternative measurement-based protocol without introducing any additional ancilla qubits. We then apply sparse stabilizer measurements to generate large GHZ states by detecting bit-flip and amplitude-damping errors. Employing this technique in combination with deterministic error suppression, we generate a 75-qubit GHZ state exhibiting genuine multipartite entanglement, the largest reported to date. The generation requires no more than 9 ancilla qubits and the fraction of samples discarded due to errors grows no higher than 78%, far lower than previous discard fractions required for tests using comparable numbers of fully encoded qubits. This work in total represents compelling evidence that adopting QEC primitives on current-generation devices can deliver substantial net benefits.

arXiv:2411.14638•PRX Quantum•May 16, 2025•6 citations
In this paper, we describe and experimentally demonstrate an error detection scheme that does not employ ancilla qubits or mid-circuit measurements. This is achieved by expanding the Hilbert space where a single logical qubit is encoded using several physical qubits. For example, one possible two qubit encoding identifies ∣0⟩L=∣01⟩|0\rangle_L=|01\rangle∣0⟩L​=∣01⟩ and ∣1⟩L=∣10⟩|1\rangle_L=|10\rangle∣1⟩L​=∣10⟩. If during the final measurement a ∣11⟩|11\rangle∣11⟩ or ∣00⟩|00\rangle∣00⟩ is observed an error is declared and the run is not included in subsequent analysis. We provide codewords for a simple bit-flip encoding, a way to encode the states, a way to implement logical U3U_3U3​ and logical CxC_xCx​ gates, and a description of which errors can be detected. We then run Greenberger-Horne-Zeilinger circuits on the transmon based IBM quantum computers, with an input space of N∈{2,3,4,5}N\in\{2,3,4,5\}N∈{2,3,4,5} logical qubits and Q∈{1,2,3,4,5}Q\in\{1,2,3,4,5\}Q∈{1,2,3,4,5} physical qubits per logical qubit. The results are compared relative to Q=1Q=1Q=1 with and without error detection and we find a significant improvement for Q∈{2,3,4}Q\in\{2,3,4\}Q∈{2,3,4}.
Abstract We propose a quantum error mitigation scheme for single-qubit measurement errors, particularly suited for one-way quantum computation. Contrary to well established error mitigation methods for circuit-based quantum computation that require the circuits to be run several times, our method is capable of mitigating measurement errors in real time during the processing measurements in the one-way computation. For that, an ancillary qubit register is entangled with the to-be-measured qubit and additionally measured afterwards. By using a voting protocol on all measurement outcomes, occurring measurement errors can be mitigated in real time while the one-way computation continues. We provide an analytical expression for the probability to detect a measurement error depending on the error rate and the number of ancilla qubits. From this, we derive an estimate of the ancilla register size for a given measurement error rate and a required success probability to detect a measurement error. Additionally, we consider the CNOT gate error in our mitigation method and investigate how this influences the probability to detect a measurement error. Finally, we show in proof-of-principle simulations and in experiments executed on IBM quantum hardware that our method is capable of reducing the measurement errors significantly in a one-way quantum computation with only a small number of ancilla qubits.
Quantum data are susceptible to decoherence induced by the environment and to errors in the hardware processing it. A future fault-tolerant quantum computer will use quantum error correction to actively protect against both. In the smallest error correction codes, the information in one logical qubit is encoded in a two-dimensional subspace of a larger Hilbert space of multiple physical qubits. For each code, a set of non-demolition multi-qubit measurements, termed stabilizers, can discretize and signal physical qubit errors without collapsing the encoded information. Here using a five-qubit superconducting processor, we realize the two parity measurements comprising the stabilizers of the three-qubit repetition code protecting one logical qubit from physical bit-flip errors. While increased physical qubit coherence times and shorter quantum error correction blocks are required to actively safeguard the quantum information, this demonstration is a critical step towards larger codes based on multiple parity measurements.
The ability to perform quantum error correction (QEC) and robust gate operations on encoded qubits opens the door to demonstrations of quantum algorithms. Contemporary QEC schemes typically require mid-circuit measurements with feed-forward control, which are challenging for qubit control, often slow, and susceptible to relatively high error rates. In this work, we propose and experimentally demonstrate a universal toolbox of fault-tolerant logical operations on error-detecting codes without mid-circuit measurements on a trapped-ion quantum processor. We present modular logical state teleportation between two four-qubit error-detecting codes without measurements during algorithm execution. Moreover, we realize a fault-tolerant universal gate set on an eight-qubit error-detecting code hosting three logical qubits, based on state injection, which can be executed by coherent gate operations only. We apply this toolbox to experimentally realize Grover's quantum search algorithm fault-tolerantly on three logical qubits encoded in eight physical qubits, with the implementation displaying clear identification of the desired solution states. Our work demonstrates the practical feasibility and provides first steps into the largely unexplored direction of measurement-free quantum computation.
Noisy intermediate-scale quantum algorithms require novel paradigms of error mitigation. To obtain noise-robust quantum computers, each logical qubit is equipped with hundreds or thousands of physical qubits. However, it is not possible to use memory-consuming techniques for current quantum devices having at most hundreds or thousands of physical qubits on their own. For specific problems, valid quantum states have a unique structure as in the case of Fock states and WWW states where the Hamming weight is fixed, and the evolution takes place in a smaller subspace of the full Hilbert space. With this preknowledge, some errors can be detected during the evolution of the circuit, by filtering the states not obeying the pattern through postselection. In this paper, we present mid-circuit postselection schemes for frequently used encodings such as one-hot, binary, gray, and domain-wall encoding. For the particular subspace of one-hot states, we propose a method that works by compressing the full Hilbert space to a smaller subspace, allowing projecting to the desired subspace without using any ancilla qubits. We demonstrate the effectiveness of the approach for the quantum alternating operator ansatz algorithm. Our method is particularly suitable for the currently available hardware, where measuring and resetting are possible, but classical conditional operators are not.
A critical component of any quantum error-correcting scheme is detection of errors by using an ancilla system. However, errors occurring in the ancilla can propagate onto the logical qubit, irreversibly corrupting the encoded information. We demonstrate a fault-tolerant error-detection scheme that suppresses spreading of ancilla errors by a factor of 5, while maintaining the assignment fidelity. The same method is used to prevent propagation of ancilla excitations, increasing the logical qubit dephasing time by an order of magnitude. Our approach is hardware-efficient, as it uses a single multilevel transmon ancilla and a cavity-encoded logical qubit, whose interaction is engineered in situ by using an off-resonant sideband drive. The results demonstrate that hardware-efficient approaches that exploit system-specific error models can yield advances toward fault-tolerant quantum computation.
The resource overhead required to achieve net computational benefits from quantum error correction (QEC) limits its utility while current systems remain constrained in size, despite exceptional progress in experimental demonstrations. In this paper, we demonstrate that the strategic application of QEC primitives without logical encoding can yield significant advantages on superconducting processors—relative to any alternative error-reduction strategy—while only requiring a modest overhead. We first present a novel protocol for implementing long-range gates that relies on a unitarily prepared Greenberger-Horne-Zeilinger (GHZ) state as well as a unitary disentangling step; the protocol natively introduces an error-detection process using the disentangled qubits as flags. We demonstrate that it achieves state-of-the-art gate fidelities of over 85% across up to 40 lattice sites, significantly and consistently outperforming the best alternative measurement-based protocol without introducing any additional ancilla qubits. We then apply sparse stabilizer measurements to generate large GHZ states by detecting bit-flip and amplitude-damping errors. Employing this technique in combination with deterministic error suppression, we generate a 75-qubit GHZ state exhibiting genuine multipartite entanglement, the largest reported to date. The generation requires no more than 9 ancilla qubits and the fraction of samples discarded due to errors grows no higher than 78%, far lower than previous discard fractions required for tests using comparable numbers of fully encoded qubits. This work in total represents compelling evidence that adopting QEC primitives on current-generation devices can deliver substantial net benefits.