Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2204.03165 · Physical review. B./Physical review. B

Root- N Krylov-space correction vectors for spectral functions with the density matrix renormalization group

Alberto Nocera, G. Alvarez

Published Nov 3, 2022• 16 citations
arXivHTMLPDF

Abstract

We propose a method to compute spectral functions of generic Hamiltonians using the density matrix renormalization group (DMRG) algorithm directly in the frequency domain, based on a modified Krylov-space decomposition to compute the correction vectors. Our approach entails the calculation of the root-$N$ ($N=2$ is the standard square root) of the Hamiltonian propagator using Krylov-space decomposition and repeating this procedure $N$ times to obtain the actual correction vector. We show that our method greatly alleviates the burden of keeping a large bond dimension at large target frequencies, a problem found with conventional correction-vector DMRG, whereas achieving better computational performance at large $N$. We apply our method to spin and charge spectral functions of $t\text{\ensuremath{-}}J$ and Hubbard models in the challenging two-leg ladder geometry and provide evidence that the root-$N$ approach reaches a much improved spectral resolution compared to the conventional correction vector.

DOI
10.1103/physrevb.106.205106

Related papers

Spectral functions with the density matrix renormalization group: Krylov-space approach for correction vectors

Alberto Nocera, Gonzalo Álvarez

Frequency-dependent correlations, such as the spectral function and the dynamical structure factor, help illustrate condensed matter experiments. Within the density matrix renormalization group (DMRG) framework, an accurate method for calculating spectral functions directly in frequency is the correction-vector method. The correction vector can be computed by solving a linear equation or by minimizing a functional. This paper proposes an alternative to calculate the correction vector: to use the Krylov-space approach. This paper then studies the accuracy and performance of the Krylov-space approach, when applied to the Heisenberg, the t-J, and the Hubbard models. The cases studied indicate that the Krylov-space approach can be more accurate and efficient than the conjugate gradient, and that the error of the former integrates best when a Krylov-space decomposition is also used for ground state DMRG.

arXiv:1607.03538•Physical review. E•Nov 21, 2016•96 citations

Spectral functions for single- and multi-impurity models using density matrix renormalization group

Robert Peters

This article focuses on the calculation of spectral functions for single- and multi-impurity models using the density matrix renormalization group (DMRG). To calculate spectral functions in DMRG, the correction vector method is presently the most widely used approach. One, however, always obtains Lorentzian convoluted spectral functions, which in applications like the dynamical mean-field theory can lead to wrong results. In order to overcome this restriction, we use chain decompositions in which the resulting effective Hamiltonian can be diagonalized completely to calculate a discrete ``peak'' spectrum. We show that this peak spectrum is a very good approximation to a deconvolution of the correction vector spectral function. Calculating this deconvoluted spectrum directly from the DMRG basis set and operators is the most natural approach, because it uses only information from the system itself. Having calculated this excitation spectrum, one can use an arbitrary broadening to obtain a smooth spectral function or directly analyze the excitations. As a nontrivial test, we apply this method to obtain spectral functions for a model of three coupled Anderson impurities. Although we are focusing in this article on impurity models, the proposed method for calculating the peak spectrum can be easily adapted to usual lattice models.

arXiv:1103.5837•Physical Review B•Aug 11, 2011•28 citations

Adaptive Lanczos-vector method for dynamic properties within the density matrix renormalization group

Piet E. Dargel, A. Honecker, Robert Peters +2 more

Current widely used approaches to calculate spectral functions using the density-matrix renormalization group in frequency space either necessarily include an artificial broadening (correction-vector method), have limited resolution (time-domain density-matrix renormalization group with Fourier transform method), or are limited to low-energy properties or single dominant modes (original continued fraction method). Here we propose an adaptive Lanczos-vector method to calculate the coefficients of a continued fraction expansion of the spectral function iteratively. We show that one can obtain a very accurate representation of the spectral function very efficiently, and that one can also directly extract the spectral weights and poles for the discrete system.

arXiv:1012.5543•Physical Review B•Apr 22, 2011•39 citations

Dynamic Density-Matrix Renormalization for the Symmetric Single Impurity Anderson Model

Carsten Raas

In this thesis we investigated, implemented, gauged, optimized, and applied a numerical approach given by the dynamic density-matrix renormalization (D-DMRG). The dynamic density-matrix renormalization is the extension of standard DMRG to the calculation of dynamic quantities. D-DMRG provides valuable numerical information on dynamic correlations by computing convolutions of the corresponding spectral densities. The dynamics at zero temperature is determined by computing the expectation values in the local propagator. This can be realized by targeting not only at the ground state and the excited state, but also at the resolvent applied to the excited state. This additional targeted state is called the correction vector. The calculation of the frequency-dependent correction vector is numerically extremely demanding due to the inversion of an almost singular non-hermitian matrix. We compared the performance of several iterative solvers for linear equation systems and managed to stabilize the inversion problem of the D-DMRG by using optimized algorithms. The main limitation of the correction vector D-DMRG is that one cannot obtain data for purely real frequencies but only for frequencies with a certain imaginary part. Hence the extraction of the behavior at purely real frequencies is one of the main problems to be solved in using the D-DMRG. We illustrated how and to which extent such data can be deconvolved to retrieve the wanted spectral densities. We discussed and compared various algorithms to achieve this extraction and presented a non-linear approach from the family of maximum entropy methods. This approach provides a continuous, positive ansatz for the wanted spectral density with the least bias (LB). Even relative abrupt changes of the spectral density can be reproduced satisfactorily. In the vicinity of singularities spurious oscillations occur. The least-bias ansatz can be made more robust towards small numerical inaccuracies and finite-size effects by including besides the entropy functional a xi-functional in the functional to be minimized. We investigated the dynamic propagator of the symmetric single impurity Anderson model by D-DMRG. The Abrikosov-Suhl resonance (ASR) was calculated to gauge the D-DMRG and to demonstrate that features at low energies can be resolved. The low energy scale of the SIAM was reproduced over two orders of magnitude. The Hubbard satellites were investigated. From the broadened D-DMRG raw data we extracted the width and the shifts from the atomic positions. By means of the LB extraction we were able to address the line shape of the satellites. It was found that the Hubbard satellites are strongly asymmetric, the peak is very pronounced and the maximum value is very high. The Hubbard model on the Bethe lattice with infinite coordination number was investigated by means of the dynamic mean-field theory (DMFT) using the D-DMRG as impurity solver. A high-resolution investigation of the electron spectra close to the metal-to-insulator transition in dynamic mean-field theory was presented. The all-numerical, consistent confirmation of a smooth transition at zero temperature is provided.

•Jan 1, 2005•0 citations

Tangent-Space Krylov Computation of Real-Frequency Spectral Functions: Influence of Density-Assisted Hopping on 2D Mott Physics

Oleksandra I. Kovalska, Jan von Delft, Andreas Gleis

We present a tangent-space Krylov method for efficient computation of zero-temperature real-frequency spectral functions on top of ground-state matrix product states obtained from the density matrix renormalization group. It relies on projecting the Hamiltonian to the tangent space of the ground-state matrix product states, where resolvents can be efficiently represented using Krylov space techniques. This enables direct computations of excitation energies and the corresponding spectral weights. We demonstrate the accuracy and efficiency of the tangent-space Krylov approach by showcasing spectral data for various models. These include the 1D Haldane-Shastry and Heisenberg models as benchmarks. As an interesting application, we study the Hubbard model on a cylinder at half filling, augmented by a density-assisted hopping (DAH) term. We find that DAH leads to particle-hole asymmetric single-particle mobilities and lifetimes in the resulting Mott insulator, and identify the responsible scattering processes. Furthermore, we find that DAH influences the dispersion of Green's function zeros beyond its range, which has a frustrating effect on the Mott insulator studied here.

arXiv:2510.07279•Physical Review Letters•Aug 19, 2026•11 citations

Efficient perturbation theory to improve the density matrix renormalization group

Emanuele Tirrito, Shi-Ju Ran, Andrew J. Ferris +2 more

The density matrix renormalization group (DMRG) is one of the most powerful numerical methods available for many-body systems. It has been applied to solve many physical problems, including the calculation of ground states and dynamical properties. In this work, we develop a perturbation theory of the DMRG (PT-DMRG) to greatly increase its accuracy in an extremely simple and efficient way. Using the canonical matrix product state (MPS) representation for the ground state of the considered system, a set of orthogonal basis functions $\left\{|{\ensuremath{\psi}}_{i}\ensuremath{\rangle}\right\}$ is introduced to describe the perturbations to the ground state obtained by the conventional DMRG. The Schmidt numbers of the MPS that are beyond the bond dimension cutoff are used to define these perturbation terms. The perturbed Hamiltonian is then defined as ${\stackrel{\ifmmode \tilde{}\else \~{}\fi{}}{H}}_{ij}=\ensuremath{\langle}{\ensuremath{\psi}}_{i}|\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{H}|{\ensuremath{\psi}}_{j}\ensuremath{\rangle}$; its ground state permits us to calculate physical observables with a considerably improved accuracy compared to the original DMRG results. We benchmark the second-order perturbation theory with the help of a one-dimensional Ising chain in a transverse field and the Heisenberg chain, where the precision of the DMRG is shown to be improved $O(10)$ times. Furthermore, for moderate $L$ the errors of the DMRG and PT-DMRG both scale linearly with ${L}^{\ensuremath{-}1}$ (with $L$ being the length of the chain). The linear relation between the dimension cutoff of the DMRG and that of the PT-DMRG at the same precision shows a considerable improvement in efficiency, especially for large dimension cutoffs. In the thermodynamic limit we show that the errors of the PT-DMRG scale with $\sqrt{{L}^{\ensuremath{-}1}}$. Our work suggests an effective way to define the tangent space of the ground-state MPS, which may shed light on the properties beyond the ground state. This second-order PT-DMRG can be readily generalized to higher orders, as well as applied to models in higher dimensions.

arXiv:1605.00940•Physical review. B./Physical review. B•Feb 21, 2017•5 citations
We propose a method to compute spectral functions of generic Hamiltonians using the density matrix renormalization group (DMRG) algorithm directly in the frequency domain, based on a modified Krylov-space decomposition to compute the correction vectors. Our approach entails the calculation of the root-NNN (N=2N=2N=2 is the standard square root) of the Hamiltonian propagator using Krylov-space decomposition and repeating this procedure NNN times to obtain the actual correction vector. We show that our method greatly alleviates the burden of keeping a large bond dimension at large target frequencies, a problem found with conventional correction-vector DMRG, whereas achieving better computational performance at large NNN. We apply our method to spin and charge spectral functions of t\ensuremath-Jt\text{\ensuremath{-}}Jt\ensuremath-J and Hubbard models in the challenging two-leg ladder geometry and provide evidence that the root-NNN approach reaches a much improved spectral resolution compared to the conventional correction vector.
Frequency-dependent correlations, such as the spectral function and the dynamical structure factor, help illustrate condensed matter experiments. Within the density matrix renormalization group (DMRG) framework, an accurate method for calculating spectral functions directly in frequency is the correction-vector method. The correction vector can be computed by solving a linear equation or by minimizing a functional. This paper proposes an alternative to calculate the correction vector: to use the Krylov-space approach. This paper then studies the accuracy and performance of the Krylov-space approach, when applied to the Heisenberg, the t-J, and the Hubbard models. The cases studied indicate that the Krylov-space approach can be more accurate and efficient than the conjugate gradient, and that the error of the former integrates best when a Krylov-space decomposition is also used for ground state DMRG.
This article focuses on the calculation of spectral functions for single- and multi-impurity models using the density matrix renormalization group (DMRG). To calculate spectral functions in DMRG, the correction vector method is presently the most widely used approach. One, however, always obtains Lorentzian convoluted spectral functions, which in applications like the dynamical mean-field theory can lead to wrong results. In order to overcome this restriction, we use chain decompositions in which the resulting effective Hamiltonian can be diagonalized completely to calculate a discrete ``peak'' spectrum. We show that this peak spectrum is a very good approximation to a deconvolution of the correction vector spectral function. Calculating this deconvoluted spectrum directly from the DMRG basis set and operators is the most natural approach, because it uses only information from the system itself. Having calculated this excitation spectrum, one can use an arbitrary broadening to obtain a smooth spectral function or directly analyze the excitations. As a nontrivial test, we apply this method to obtain spectral functions for a model of three coupled Anderson impurities. Although we are focusing in this article on impurity models, the proposed method for calculating the peak spectrum can be easily adapted to usual lattice models.
Current widely used approaches to calculate spectral functions using the density-matrix renormalization group in frequency space either necessarily include an artificial broadening (correction-vector method), have limited resolution (time-domain density-matrix renormalization group with Fourier transform method), or are limited to low-energy properties or single dominant modes (original continued fraction method). Here we propose an adaptive Lanczos-vector method to calculate the coefficients of a continued fraction expansion of the spectral function iteratively. We show that one can obtain a very accurate representation of the spectral function very efficiently, and that one can also directly extract the spectral weights and poles for the discrete system.
In this thesis we investigated, implemented, gauged, optimized, and applied a numerical approach given by the dynamic density-matrix renormalization (D-DMRG). The dynamic density-matrix renormalization is the extension of standard DMRG to the calculation of dynamic quantities. D-DMRG provides valuable numerical information on dynamic correlations by computing convolutions of the corresponding spectral densities. The dynamics at zero temperature is determined by computing the expectation values in the local propagator. This can be realized by targeting not only at the ground state and the excited state, but also at the resolvent applied to the excited state. This additional targeted state is called the correction vector. The calculation of the frequency-dependent correction vector is numerically extremely demanding due to the inversion of an almost singular non-hermitian matrix. We compared the performance of several iterative solvers for linear equation systems and managed to stabilize the inversion problem of the D-DMRG by using optimized algorithms. The main limitation of the correction vector D-DMRG is that one cannot obtain data for purely real frequencies but only for frequencies with a certain imaginary part. Hence the extraction of the behavior at purely real frequencies is one of the main problems to be solved in using the D-DMRG. We illustrated how and to which extent such data can be deconvolved to retrieve the wanted spectral densities. We discussed and compared various algorithms to achieve this extraction and presented a non-linear approach from the family of maximum entropy methods. This approach provides a continuous, positive ansatz for the wanted spectral density with the least bias (LB). Even relative abrupt changes of the spectral density can be reproduced satisfactorily. In the vicinity of singularities spurious oscillations occur. The least-bias ansatz can be made more robust towards small numerical inaccuracies and finite-size effects by including besides the entropy functional a xi-functional in the functional to be minimized. We investigated the dynamic propagator of the symmetric single impurity Anderson model by D-DMRG. The Abrikosov-Suhl resonance (ASR) was calculated to gauge the D-DMRG and to demonstrate that features at low energies can be resolved. The low energy scale of the SIAM was reproduced over two orders of magnitude. The Hubbard satellites were investigated. From the broadened D-DMRG raw data we extracted the width and the shifts from the atomic positions. By means of the LB extraction we were able to address the line shape of the satellites. It was found that the Hubbard satellites are strongly asymmetric, the peak is very pronounced and the maximum value is very high. The Hubbard model on the Bethe lattice with infinite coordination number was investigated by means of the dynamic mean-field theory (DMFT) using the D-DMRG as impurity solver. A high-resolution investigation of the electron spectra close to the metal-to-insulator transition in dynamic mean-field theory was presented. The all-numerical, consistent confirmation of a smooth transition at zero temperature is provided.
We present a tangent-space Krylov method for efficient computation of zero-temperature real-frequency spectral functions on top of ground-state matrix product states obtained from the density matrix renormalization group. It relies on projecting the Hamiltonian to the tangent space of the ground-state matrix product states, where resolvents can be efficiently represented using Krylov space techniques. This enables direct computations of excitation energies and the corresponding spectral weights. We demonstrate the accuracy and efficiency of the tangent-space Krylov approach by showcasing spectral data for various models. These include the 1D Haldane-Shastry and Heisenberg models as benchmarks. As an interesting application, we study the Hubbard model on a cylinder at half filling, augmented by a density-assisted hopping (DAH) term. We find that DAH leads to particle-hole asymmetric single-particle mobilities and lifetimes in the resulting Mott insulator, and identify the responsible scattering processes. Furthermore, we find that DAH influences the dispersion of Green's function zeros beyond its range, which has a frustrating effect on the Mott insulator studied here.
The density matrix renormalization group (DMRG) is one of the most powerful numerical methods available for many-body systems. It has been applied to solve many physical problems, including the calculation of ground states and dynamical properties. In this work, we develop a perturbation theory of the DMRG (PT-DMRG) to greatly increase its accuracy in an extremely simple and efficient way. Using the canonical matrix product state (MPS) representation for the ground state of the considered system, a set of orthogonal basis functions $\left\{|{\ensuremath{\psi}}_{i}\ensuremath{\rangle}\right\}$ is introduced to describe the perturbations to the ground state obtained by the conventional DMRG. The Schmidt numbers of the MPS that are beyond the bond dimension cutoff are used to define these perturbation terms. The perturbed Hamiltonian is then defined as ${\stackrel{\ifmmode \tilde{}\else \~{}\fi{}}{H}}_{ij}=\ensuremath{\langle}{\ensuremath{\psi}}_{i}|\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{H}|{\ensuremath{\psi}}_{j}\ensuremath{\rangle}$; its ground state permits us to calculate physical observables with a considerably improved accuracy compared to the original DMRG results. We benchmark the second-order perturbation theory with the help of a one-dimensional Ising chain in a transverse field and the Heisenberg chain, where the precision of the DMRG is shown to be improved O(10)O(10)O(10) times. Furthermore, for moderate LLL the errors of the DMRG and PT-DMRG both scale linearly with ${L}^{\ensuremath{-}1}$ (with LLL being the length of the chain). The linear relation between the dimension cutoff of the DMRG and that of the PT-DMRG at the same precision shows a considerable improvement in efficiency, especially for large dimension cutoffs. In the thermodynamic limit we show that the errors of the PT-DMRG scale with $\sqrt{{L}^{\ensuremath{-}1}}$. Our work suggests an effective way to define the tangent space of the ground-state MPS, which may shed light on the properties beyond the ground state. This second-order PT-DMRG can be readily generalized to higher orders, as well as applied to models in higher dimensions.