Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2203.09320 · Science Advances

Self-aligned patterning technique for fabricating high-performance diamond sensor arrays with nanoscale precision

Mengqi Wang, Haoyu Sun, Xiangyu Ye, Pei Yu, Hangyu Liu, Jingwei Zhou, Pengfei Wang, Fazhan Shi, Ya Wang, Jiangfeng Du

Published Sep 23, 2022• 48 citations
arXivHTMLPDF

Abstract

Efficient, nanoscale precision alignment of defect center creation in photonics structures in challenges the realization of high-performance photonic devices and quantum technology applications. Here, we propose a facile self-aligned patterning technique based on conventional engineering technology, with doping precision that can reach ~15 nm. We demonstrate this technique by fabricating diamond nanopillar sensor arrays with high consistency and near-optimal photon counts. The sensor array achieves high yield approaching the theoretical limit, and high efficiency for filtering sensors with different numbers of nitrogen vacancy centers. Combined with appropriate crystal orientation, the system achieves a saturated fluorescence rate of 4.34 Mcps and effective fluorescence-dependent detection sensitivity of 1800 cps −1/2 . These sensors also show enhanced spin properties in the isotope-enriched diamond. Our technique is applicable to all similar solid-state systems and could facilitate the development of parallel quantum sensing and scalable information processing.

DOI
10.1126/sciadv.abn9573

Related papers

Photonic nano-structures on (111)-oriented diamond

Elke Neu, Patrick Appel, Marc Ganzhorn +7 more

We demonstrate the fabrication of single-crystalline diamond nanopillars on a (111)-oriented chemical vapor deposited diamond substrate. This crystal orientation offers optimal coupling of nitrogen-vacancy (NV) center emission to the nanopillar mode and is thus advantageous over previous approaches. We characterize single native NV centers in these nanopillars and find one of the highest reported saturated fluorescence count rates in single crystalline diamond in excess of 106 counts per second. We show that our nano-fabrication procedure conserves the preferential alignment as well as the spin coherence of the NVs in our structures. Our results will enable a new generation of highly sensitive probes for NV magnetometry and pave the way toward photonic crystals with optimal orientation of the NV center's emission dipole.

arXiv:1403.6063•Applied Physics Letters•Apr 14, 2014•110 citations

Multicone Diamond Waveguides for Nanoscale Quantum Sensing

Tianqi Zhu, J. Rhensius, Konstantin Herb +4 more

The long-lived electronic spin of the nitrogen-vacancy (NV) center in diamonds is a promising quantum sensor for detecting nanoscopic magnetic and electric fields in various environments. However, the poor signal-to-noise ratio (SNR) of prevalent optical spin-readout techniques presents a critical challenge in improving measurement sensitivity. Here, we address this limitation by coupling individual NVs to optimized diamond nanopillars, thereby enhancing the collection efficiency of fluorescence. Guided by near-field optical simulations, we predict improved performance for tall (≥5 μm) pillars with tapered sidewalls. This is subsequently verified by fabricating and characterizing a representative set of structures using a newly developed nanofabrication process. We observe increased SNR for optimized devices, owing to improved emission collimation and directionality. Promisingly, these devices are compatible with low-numerical-aperture collection optics and a reduced tip radius, reducing experimental overhead and facilitating improved spatial resolution for scanning applications.

arXiv:2306.02966•Nano Letters•Nov 7, 2023•20 citations

Scalable nanoscale positioning of highly coherent color centers in prefabricated diamond nanostructures

Sunghoon Kim, Paz London, Daipeng Yang +6 more

Abstract Nanophotonic devices in color center-containing hosts provide efficient readout, control, and entanglement of the embedded emitters. Yet control over color center formation – in number, position, and coherence – in nanophotonic devices remains a challenge to scalability. Here, we report a controlled creation of highly coherent diamond nitrogen-vacancy (NV) centers with nanoscale three-dimensional localization in prefabricated nanostructures with high yield. Combining nitrogen δ -doping during chemical vapor deposition diamond growth and localized electron irradiation, we form shallow NVs registered to the center of diamond nanopillars with wide tunability over NV number. We report a positioning precision of ~ 4 nm in depth and 46(1) nm laterally in 280 nm-diameter pillars (102(2) nm in bulk diamond). We reliably form single NV centers with long spin coherence times (average $${T}_{2}^{Hahn}=98\, \mu {{{\rm{s}}}}$$ T 2 H a h n = 98 μ s ) and higher average photoluminescence compared to NV centers randomly positioned in pillars. Our method can improve the performance of various NV-based devices. In the realm of magnetic sensing, we achieve a 3 × improved yield of NV centers with single electron-spin sensitivity over conventional implantation-based methods. Our high-yield defect creation method will enable scalable production of solid-state defect sensors and processors.

arXiv:2502.01198•Nature Communications•Nov 6, 2025•12 citations

Nanoscale Sensing Using Point Defects in Single-Crystal Diamond: Recent Progress on Nitrogen Vacancy Center-Based Sensors

Ettore Bernardi, Richard Nelz, Selda Sonusen +1 more

Individual, luminescent point defects in solids, so-called color centers, are atomic-sized quantum systems enabling sensing and imaging with nanoscale spatial resolution. In this overview, we introduce nanoscale sensing based on individual nitrogen vacancy (NV) centers in diamond. We discuss two central challenges of the field: first, the creation of highly-coherent, shallow NV centers less than 10 nm below the surface of a single-crystal diamond; second, the fabrication of tip-like photonic nanostructures that enable efficient fluorescence collection and can be used for scanning probe imaging based on color centers with nanoscale resolution.

arXiv:1704.04011•Crystals•Apr 28, 2017•67 citations

Fabrication of oriented NV center arrays in diamond via femtosecond laser writing and reorientation

Kai Klink, Andrew Raj Kirkpatrick, Yukihiro Tadokoro +2 more

Introduction Nitrogen-vacancy (NV) centers in diamond are widely recognized as highly promising solid-state quantum sensors due to their long room temperature coherence times and atomic-scale size, which enable exceptional sensitivity and nanoscale spatial resolution under ambient conditions. Ultrafast laser writing has demonstrated the deterministic spatial control of individual NV− centers, however, the resulting random orientation of the defect axis limits the magnetic field sensitivity and signal contrast. Methods We developed an all-optical approach for reorienting laser-written NV− centers to lie along a specific crystallographic axis using femtosecond laser annealing. The orientation is determined by polarization analysis, and the annealing and subsequent polarization analysis are repeated until the desired orientation is observed. Results Our method achieves deterministic alignment of NV− centers along the optical axis in (111)-oriented diamond substrates and allows selection between two observable orientation classes in (100)-oriented substrates. The reorientation preserves spatial ordering while producing uniform orientation across arrays of NV− centers. Discussion This approach enables scalable fabrication of orientation-controlled NV− arrays, and paves the way for scalable, high performance quantum devices based on orientation-controlled NV− centers.

arXiv:2507.14047•Frontiers in Quantum Science and Technology•Sep 23, 2025•7 citations

Invited Article: Precision nanoimplantation of nitrogen vacancy centers into diamond photonic crystal cavities and waveguides

Marco Schukraft, Jiabao Zheng, Tim Schröder +5 more

We demonstrate a self-aligned lithographic technique for precision generation of nitrogen vacancy (NV) centers within photonic nanostructures on bulk diamond substrates. The process relies on a lithographic mask with nanoscale implantation apertures for NV creation, together with larger features for producing waveguides and photonic nanocavities. This mask allows targeted nitrogen ion implantation, and precision dry etching of nanostructures on bulk diamond. We demonstrate high-yield generation of single NVs at pre-determined nanoscale target regions on suspended diamond waveguides. We report implantation into the mode maximum of diamond photonic crystal nanocavities with a single-NV per cavity yield of ∼26% and Purcell induced intensity enhancement of the zero-phonon line. The generation of NV centers aligned with diamond photonic structures marks an important tool for scalable production of optically coupled spin memories.

APL Photonics•May 1, 2016•42 citations
Efficient, nanoscale precision alignment of defect center creation in photonics structures in challenges the realization of high-performance photonic devices and quantum technology applications. Here, we propose a facile self-aligned patterning technique based on conventional engineering technology, with doping precision that can reach ~15 nm. We demonstrate this technique by fabricating diamond nanopillar sensor arrays with high consistency and near-optimal photon counts. The sensor array achieves high yield approaching the theoretical limit, and high efficiency for filtering sensors with different numbers of nitrogen vacancy centers. Combined with appropriate crystal orientation, the system achieves a saturated fluorescence rate of 4.34 Mcps and effective fluorescence-dependent detection sensitivity of 1800 cps −1/2 . These sensors also show enhanced spin properties in the isotope-enriched diamond. Our technique is applicable to all similar solid-state systems and could facilitate the development of parallel quantum sensing and scalable information processing.
We demonstrate the fabrication of single-crystalline diamond nanopillars on a (111)-oriented chemical vapor deposited diamond substrate. This crystal orientation offers optimal coupling of nitrogen-vacancy (NV) center emission to the nanopillar mode and is thus advantageous over previous approaches. We characterize single native NV centers in these nanopillars and find one of the highest reported saturated fluorescence count rates in single crystalline diamond in excess of 106 counts per second. We show that our nano-fabrication procedure conserves the preferential alignment as well as the spin coherence of the NVs in our structures. Our results will enable a new generation of highly sensitive probes for NV magnetometry and pave the way toward photonic crystals with optimal orientation of the NV center's emission dipole.
The long-lived electronic spin of the nitrogen-vacancy (NV) center in diamonds is a promising quantum sensor for detecting nanoscopic magnetic and electric fields in various environments. However, the poor signal-to-noise ratio (SNR) of prevalent optical spin-readout techniques presents a critical challenge in improving measurement sensitivity. Here, we address this limitation by coupling individual NVs to optimized diamond nanopillars, thereby enhancing the collection efficiency of fluorescence. Guided by near-field optical simulations, we predict improved performance for tall (≥5 μm) pillars with tapered sidewalls. This is subsequently verified by fabricating and characterizing a representative set of structures using a newly developed nanofabrication process. We observe increased SNR for optimized devices, owing to improved emission collimation and directionality. Promisingly, these devices are compatible with low-numerical-aperture collection optics and a reduced tip radius, reducing experimental overhead and facilitating improved spatial resolution for scanning applications.
Abstract Nanophotonic devices in color center-containing hosts provide efficient readout, control, and entanglement of the embedded emitters. Yet control over color center formation – in number, position, and coherence – in nanophotonic devices remains a challenge to scalability. Here, we report a controlled creation of highly coherent diamond nitrogen-vacancy (NV) centers with nanoscale three-dimensional localization in prefabricated nanostructures with high yield. Combining nitrogen δ -doping during chemical vapor deposition diamond growth and localized electron irradiation, we form shallow NVs registered to the center of diamond nanopillars with wide tunability over NV number. We report a positioning precision of ~ 4 nm in depth and 46(1) nm laterally in 280 nm-diameter pillars (102(2) nm in bulk diamond). We reliably form single NV centers with long spin coherence times (average T2Hahn=98 μs{T}_{2}^{Hahn}=98\, \mu {{{\rm{s}}}}T2Hahn​=98μs T 2 H a h n = 98 μ s ) and higher average photoluminescence compared to NV centers randomly positioned in pillars. Our method can improve the performance of various NV-based devices. In the realm of magnetic sensing, we achieve a 3 × improved yield of NV centers with single electron-spin sensitivity over conventional implantation-based methods. Our high-yield defect creation method will enable scalable production of solid-state defect sensors and processors.
Individual, luminescent point defects in solids, so-called color centers, are atomic-sized quantum systems enabling sensing and imaging with nanoscale spatial resolution. In this overview, we introduce nanoscale sensing based on individual nitrogen vacancy (NV) centers in diamond. We discuss two central challenges of the field: first, the creation of highly-coherent, shallow NV centers less than 10 nm below the surface of a single-crystal diamond; second, the fabrication of tip-like photonic nanostructures that enable efficient fluorescence collection and can be used for scanning probe imaging based on color centers with nanoscale resolution.
Introduction Nitrogen-vacancy (NV) centers in diamond are widely recognized as highly promising solid-state quantum sensors due to their long room temperature coherence times and atomic-scale size, which enable exceptional sensitivity and nanoscale spatial resolution under ambient conditions. Ultrafast laser writing has demonstrated the deterministic spatial control of individual NV− centers, however, the resulting random orientation of the defect axis limits the magnetic field sensitivity and signal contrast. Methods We developed an all-optical approach for reorienting laser-written NV− centers to lie along a specific crystallographic axis using femtosecond laser annealing. The orientation is determined by polarization analysis, and the annealing and subsequent polarization analysis are repeated until the desired orientation is observed. Results Our method achieves deterministic alignment of NV− centers along the optical axis in (111)-oriented diamond substrates and allows selection between two observable orientation classes in (100)-oriented substrates. The reorientation preserves spatial ordering while producing uniform orientation across arrays of NV− centers. Discussion This approach enables scalable fabrication of orientation-controlled NV− arrays, and paves the way for scalable, high performance quantum devices based on orientation-controlled NV− centers.
We demonstrate a self-aligned lithographic technique for precision generation of nitrogen vacancy (NV) centers within photonic nanostructures on bulk diamond substrates. The process relies on a lithographic mask with nanoscale implantation apertures for NV creation, together with larger features for producing waveguides and photonic nanocavities. This mask allows targeted nitrogen ion implantation, and precision dry etching of nanostructures on bulk diamond. We demonstrate high-yield generation of single NVs at pre-determined nanoscale target regions on suspended diamond waveguides. We report implantation into the mode maximum of diamond photonic crystal nanocavities with a single-NV per cavity yield of ∼26% and Purcell induced intensity enhancement of the zero-phonon line. The generation of NV centers aligned with diamond photonic structures marks an important tool for scalable production of optically coupled spin memories.