All electronics are subject to thermal noise, which sets a minimum power to distinguish a signal from ambient background. Here quantum systems---in particular the nitrogen-vacancy center in diamond---show a path forward, as they can be laser-cooled to a quantum mechanical ground state while a device remains at ambient conditions. By placing an ensemble of N-$V$ centers inside a low-loss microwave cavity in which their spins strongly interact with gigahertz magnetic fields, the cold spins extract more energy than can leak in from the hot environment. The output voltage shows vastly reduced fluctuations at the cavity frequency; the effective temperature is lowered by 150 K.
All electronics are subject to thermal noise, which sets a minimum power to distinguish a signal from ambient background. Here quantum systems---in particular the nitrogen-vacancy center in diamond---show a path forward, as they can be laser-cooled to a quantum mechanical ground state while a device remains at ambient conditions. By placing an ensemble of N-V centers inside a low-loss microwave cavity in which their spins strongly interact with gigahertz magnetic fields, the cold spins extract more energy than can leak in from the hot environment. The output voltage shows vastly reduced fluctuations at the cavity frequency; the effective temperature is lowered by 150 K.
Abstract Recent experimental and theoretical studies demonstrated microwave mode cooling and cavity quantum electrodynamics (C-QED) effects at room temperature by using optically cooled nitrogen-vacancy (NV) spins. In this article, we consider improvements of these effects by exploring parameters in recent diamond maser experiments with a high frequency microwave resonator. By accounting for the rich electronic and spin levels, we provide a more complete treatment of optical pumping and dissipation in NV centers, and study the dependence of system performance on laser power. We predict the reduction of microwave photon number down to 261 (equivalent to a temperature of 116 K), about five times lower than the values reported recently. We also predict the laser-power controlled C-QED effects across weak-to-strong coupling regimes, and observe saturation of these effects under strong laser pumping. Our model can be modified straightforwardly to investigate similar effects with other solid-state spins and possible C-QED effects in maser operation.
Abstract Quantum sensors based on solid-state defects, in particular nitrogen-vacancy (NV) centers in diamond, enable precise measurement of magnetic fields, temperature, rotation, and electric fields. Cavity quantum electrodynamic (cQED) readout, in which an NV ensemble is hybridized with a microwave mode, can overcome limitations in optical spin detection and has resulted in leading magnetic sensitivities at the pT-level. This approach, however, remains far from the intrinsic spin-projection noise limit due to thermal Johnson-Nyquist noise and spin saturation effects. Here we tackle these challenges by combining recently demonstrated spin refrigeration techniques with comprehensive nonlinear modeling of the cQED sensor operation. We demonstrate that the optically-polarized NV ensemble simultaneously provides magnetic sensitivity and acts as a heat sink for the deleterious thermal microwave noise background, even when actively probed by a microwave field. Optimizing the NV-cQED system, we demonstrate a broadband sensitivity of 576 ± 6 fT/ Hz Hz around 15 kHz in ambient conditions. We then discuss the implications of this approach for the design of future magnetometers, including near-projection-limited devices approaching 3 fT/ Hz Hz sensitivity enabled by spin refrigeration.
We propose a method to create a room-temperature maser operating at approximately 2.9~GHz frequency using an ensemble of negatively charged nitrogen-vacancy electronic spins (NV) in diamond, without requiring population inversion. Our method considers a DC magnetic field of a few milli-Tesla (mT) applied along the perpendicular direction of an ensemble of NV spins aligned along a common axis. This perpendicular magnetic-field creates superposition states of ∣ms=−1⟩ and ∣ms=+1⟩ of the NV spin's ground state triplet levels and thereby makes it possible to drive all three transitions in the NV spin ground state. We model the system by including optical pumping of the NV spins, near-resonant driving of two transitions, and coupling the third transition to a near-resonant microwave resonator. Numerical estimates using experimentally realizable parameters show that inversionless masing can be achieved inside the microwave resonator using our method. As an application, we show that the output intensity of an inversionless maser (1.1×1014 spins) can be used for magnetic field sensing with a DC sensitivity on the order of a hundred pT/Hz. Our study opens a new direction in room-temperature diamond NV maser devices for quantum technological applications without the requirement of a strong bias magnetic field, as in conventional NV diamond masers.
The nitrogen-vacancy (NV) center in diamond is a leading solid-state platform for room-temperature quantum magnetometry owing to its long spin coherence times, optical spin initialization and readout, and high sensitivity to magnetic, electric, and thermal perturbations. As NV-based optically detected magnetic resonance (ODMR) systems transition from controlled laboratory environments toward portable and field-deployable sensors, a detailed understanding of realistic noise sources and experimental imperfections becomes essential for optimizing performance and sensitivity. In this work, we present a comprehensive simulation framework, i.e., a digital twin, for continuous-wave wide-field ODMR in NV-center ensembles. The model is built upon a physically consistent seven-level description of the NV center and incorporates a broad range of experimentally relevant noise and imperfection mechanisms as modular, parameterized components. These include laser and microwave amplitude fluctuations, microwave phase noise, uncertainty in the NV gyromagnetic ratio, spin dephasing, temperature-induced shifts of the ground-state zero-field splitting, surface-induced magnetic field perturbations, and photon shot noise. Power broadening and contrast degradation arising from optical and microwave driving are captured self-consistently through linewidth calculations. Also, the spatial inhomogeneity is modeled via a Gaussian laser intensity profile across the sensing region...
With the great improvement of nanotechnology, it is now possible to fabricate mechanical resonator with dimension on a micro and even nanometer scale.Because of its high vibration frequency, quality factor, very small mass, and low intrinsic dissipation, nanomechanical resonator has important applications in the field of high-precision displacement detection, force detection, mass measurement, and accurate quantum computation.Mechanical resonator is also a promising candidate for observing quantum effects in macroscopic objects.By coupling nanomechanical resonator to other solid-state system such as optical cavity, microwave cavity, nitrogen-vacancy center (NV center) and superconducting qubits, researchers have successfully cooled the mechanical resonator to its quantum ground state, which paves the way for observing nonclassical states in resonator such as superposition state and Fock state.On the other hand, the nitrogenvacancy center in diamond has attracted more and more attention because of its advantages of long coherence time at room temperature, the ability to implement initialization and readout, and microwave control.Moreover, these NV centers can be used to detect weak magnetic field and electric field at room temperature.By using both laser field and microwave field, one can implement the manipulation, storage, and readout of the quantum information.In addition, because NV centers couple to both optical field and microwave field, they can also be used as a quantum interface between optical system and solid-state system.This provides a promising platform to study novel quantum phenomena based on NV centers separated by long distances.The nitrogen-vacancy center in diamond coupled to nanomechanical resonator can be used in precision measurement and quantum information processing, which has become a hot research topic.In this paper, we study the dynamics of quadrature squeezing of the phonon field in the system consisting of nitrogen-vacancy centers in diamond coupled to both cavity field and mechanical resonator.The effects of initial state of nitrogen-vacancy center and the coupling strength between nitrogen-vacancy center and mechanical resonator on the quadrature squeezing of the phonon field are analyzed.It is shown that the phonon field squeezed state with longtime and high-degree can be generated.The physical reason is that the mechanical resonator has the largest coherence.Moreover, the non-classical property of quadrature squeezing of mechanical resonator can be achieved by manipulating the initial state of nitrogen-vacancy center and magnetic field gradient.The proposal may provide a theoretical way to control and manipulate the quadrature squeezing of the phonon field.The results obtained here may have great significance and applications in the field of quantum information processing and precision measurement.
In a diamond, the mechanical vibration-induced strain can lead to interaction between the mechanical mode and the nitrogen-vacancy (NV) centers. In this work, we propose to utilize the strain-induced coupling for the quantum non-demolition (QND) single phonon measurement and memory in a diamond. The single phonon in a diamond mechanical resonator can be perfectly absorbed and emitted by the NV centers ensemble (NVE) with adiabatically tuning the microwave driving. An optical laser drives the NVE to the excited states, which have much larger coupling strength to the mechanical mode. By adiabatically eliminating the excited states under large detuning limit, the effective coupling between the mechanical mode and the NVE can be used for QND measurement of the single phonon state. Under realistic experimental conditions, we numerically simulate the scheme. It is found that the fidelity of the absorbing and emitting process can reach a much high value. The overlap between the input and the output phonon shapes can reach 98.57%.