Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2202.02009 · Physical Review Letters

Spin Quantum Heat Engine Quantified by Quantum Steering

Wentao Ji, Zihua Chai, Mengqi Wang, Yuhang Guo, Xing Rong, Fazhan Shi, Changliang Ren, Ya Wang, Jiangfeng Du

Published Mar 1, 2022• 68 citations
arXivHTMLPDF

Abstract

Following the rising interest in quantum information science, the extension of a heat engine to the quantum regime by exploring microscopic quantum systems has seen a boon of interest in the last decade. Although quantum coherence in the quantum system of the working medium has been investigated to play a nontrivial role, a complete understanding of the intrinsic quantum advantage of quantum heat engines remains elusive. We experimentally demonstrate that the quantum correlation between the working medium and the thermal bath is critical for the quantum advantage of a quantum Szilárd engine, where quantum coherence in the working medium is naturally excluded. By quantifying the nonclassical correlation through quantum steering, we reveal that the heat engine is quantum when the demon can truly steer the working medium. The average work obtained by taking different ways of work extraction on the working medium can be used to verify the real quantum Szilárd engine.

DOI
10.1103/physrevlett.128.090602

Related papers

Steering Heat Engines: A Truly Quantum Maxwell Demon

Konstantin Beyer, Kimmo Luoma, Walter T. Strunz

We address the question of verifying the quantumness of thermal machines. A Szilárd engine is truly quantum if its work output cannot be described by a local hidden state model, i.e., an objective local statistical ensemble. Quantumness in this scenario is revealed by a steering-type inequality which bounds the classically extractable work. A quantum Maxwell demon can violate that inequality by exploiting quantum correlations between the work medium and the thermal environment. While for a classical Szilárd engine an objective description of the medium always exists, any such description can be ruled out by a steering task in a truly quantum case.

arXiv:1906.12163•Physical Review Letters•Dec 20, 2019•39 citations

The Second Law, Maxwell's Demon, and Work Derivable from Quantum Heat Engines

Tien D. Kieu

With a class of quantum heat engines which consists of two-energy-eigenstate systems undergoing, respectively, quantum adiabatic processes and energy exchanges with heat baths at different stages of a cycle, we are able to clarify some important aspects of the second law of thermodynamics. The quantum heat engines also offer a practical way, as an alternative to Szilard's engine, to physically realize Maxwell's demon. While respecting the second law on the average, they are also capable of extracting more work from the heat baths than is otherwise possible in thermal equilibrium.

arXiv:quant-ph/0508161•Physical Review Letters•Sep 29, 2004•376 citations

Dissipation-induced collective advantage of a quantum thermal machine

Matteo Carrega, Luca Razzoli, Paolo Andrea Erdman +3 more

Do quantum correlations lead to better performance with respect to several different systems working independently? For quantum thermal machines, the question is whether a working medium (WM) made of N constituents exhibits better performance than N independent engines working in parallel. Here, by inspecting a microscopic model with the WM composed by two non-interacting quantum harmonic oscillators, we show that the presence of a common environment can mediate non-trivial correlations in the WM leading to better quantum heat engine performance—maximum power and efficiency—with respect to an independent configuration. Furthermore, this advantage is striking for strong dissipation, a regime in which two independent engines cannot deliver any useful power. Our results show that dissipation can be exploited as a useful resource for quantum thermal engines and are then corroborated by optimization techniques here extended to non-Markovian quantum heat engines.

arXiv:2310.01938•AVS Quantum Science•Apr 23, 2024•16 citations

From classical to quantum heat engines

Nathan Nowell-Fenna, Jukka P. Pekola, Yu. A. Pashkin

Conventional heat engines convert thermal energy into mechanical work by using a working medium such as steam or gas that operates between a hot and a cold reservoir. The medium absorbs heat from the hot reservoir, produces work, then releases some heat to the cold reservoir and returns to the initial state. With the advancement of quantum technologies, researchers strive to understand whether quantum media, such as atoms, spins, superconducting circuits and semiconductor quantum dots, can be used in quantum counterparts of the classical heat engines. After a recap of the basics of classical heat engines, this review explores the theoretical foundations and advancements of quantum heat engines, focusing on the proposed two- and multilevel systems used as the working medium for the quantum Otto cycle, which is the ideal thermodynamic cycle that describes the operation of a spark-ignition internal combustion engine. The review compares the efficiency and the work extraction of these systems, discussing their performance in the high- and low-temperature limits. Alternative cycles and engines are also presented to establish the adaptability of the working media when operating under different processes and non-equilibrium conditions. In conclusion, the review offers possible applications and future developments of quantum heat engines.

Contemporary Physics•Jul 3, 2026•0 citations

Finite-time optimization of a quantum Szilard heat engine

Tan-Ji Zhou, Yuhan Ma, C. P. Sun

We propose a finite-time quantum Szilard engine (QSE) with a spin-1/2 quantum particle as the working substance (WS) to accelerate the operation of information engines. We introduce a Maxwell's demon (MD) to probe the spin state within a finite measurement time t M to capture the which-way information of the particle, quantified by the mutual information I ( t M ) between WS and MD. We establish that the efficiency η of QSE is bounded by η ≤ 1 − ( 1 − η C ) ln 2 / I ( t M ) , where I ( t M ) / ln 2 characterizes the ideality of quantum measurement, and approaches 1 for the Carnot efficiency reached under ideal measurement in quasistatic regime. We find that the output power of QSE scales as P O ∝ t M 3 in the short-time regime and as P O ∝ t M − 1 in the long-time regime. Additionally, considering the energy cost for erasing the MD's memory required by Landauer's principle, there exists a threshold time that guarantees QSE to output positive work. Published by the American Physical Society 2024

arXiv:2303.14619•Physical Review Research•Oct 1, 2024•9 citations

Measurement Based Quantum Heat Engine with Coupled Working Medium

Arpan Das, Sibasish Ghosh

We consider measurement based single temperature quantum heat engine without feedback control, introduced recently by Yi, Talkner and Kim [Phys. Rev. E 96, 022108 (2017)]. Taking the working medium of the engine to be a one-dimensional Heisenberg model of two spins, we calculate the efficiency of the engine undergoing a cyclic process. Starting with two spin-1/2 particles, we investigate the scenario of higher spins also. We show that, for this model of coupled working medium, efficiency can be higher than that of an uncoupled one. However, the relationship between the coupling constant and the efficiency of the engine is rather involved. We find that in the higher spin scenario efficiency can sometimes be negative (this means work has to be done to run the engine cycle) for certain range of coupling constants, in contrast to the aforesaid work of Yi, Talkner and Kim, where they showed that the extracted work is always positive in the absence of coupling. We provide arguments for this negative efficiency in higher spin scenarios. Interestingly, this happens only in the asymmetric scenarios, where the two spins are different. Given these facts, for judiciously chosen conditions, an engine with coupled working medium gives advantage for the efficiency over the uncoupled one.

arXiv:1810.07161•Entropy•Nov 19, 2019•38 citations
Following the rising interest in quantum information science, the extension of a heat engine to the quantum regime by exploring microscopic quantum systems has seen a boon of interest in the last decade. Although quantum coherence in the quantum system of the working medium has been investigated to play a nontrivial role, a complete understanding of the intrinsic quantum advantage of quantum heat engines remains elusive. We experimentally demonstrate that the quantum correlation between the working medium and the thermal bath is critical for the quantum advantage of a quantum Szilárd engine, where quantum coherence in the working medium is naturally excluded. By quantifying the nonclassical correlation through quantum steering, we reveal that the heat engine is quantum when the demon can truly steer the working medium. The average work obtained by taking different ways of work extraction on the working medium can be used to verify the real quantum Szilárd engine.
We address the question of verifying the quantumness of thermal machines. A Szilárd engine is truly quantum if its work output cannot be described by a local hidden state model, i.e., an objective local statistical ensemble. Quantumness in this scenario is revealed by a steering-type inequality which bounds the classically extractable work. A quantum Maxwell demon can violate that inequality by exploiting quantum correlations between the work medium and the thermal environment. While for a classical Szilárd engine an objective description of the medium always exists, any such description can be ruled out by a steering task in a truly quantum case.
With a class of quantum heat engines which consists of two-energy-eigenstate systems undergoing, respectively, quantum adiabatic processes and energy exchanges with heat baths at different stages of a cycle, we are able to clarify some important aspects of the second law of thermodynamics. The quantum heat engines also offer a practical way, as an alternative to Szilard's engine, to physically realize Maxwell's demon. While respecting the second law on the average, they are also capable of extracting more work from the heat baths than is otherwise possible in thermal equilibrium.
Do quantum correlations lead to better performance with respect to several different systems working independently? For quantum thermal machines, the question is whether a working medium (WM) made of N constituents exhibits better performance than N independent engines working in parallel. Here, by inspecting a microscopic model with the WM composed by two non-interacting quantum harmonic oscillators, we show that the presence of a common environment can mediate non-trivial correlations in the WM leading to better quantum heat engine performance—maximum power and efficiency—with respect to an independent configuration. Furthermore, this advantage is striking for strong dissipation, a regime in which two independent engines cannot deliver any useful power. Our results show that dissipation can be exploited as a useful resource for quantum thermal engines and are then corroborated by optimization techniques here extended to non-Markovian quantum heat engines.
Conventional heat engines convert thermal energy into mechanical work by using a working medium such as steam or gas that operates between a hot and a cold reservoir. The medium absorbs heat from the hot reservoir, produces work, then releases some heat to the cold reservoir and returns to the initial state. With the advancement of quantum technologies, researchers strive to understand whether quantum media, such as atoms, spins, superconducting circuits and semiconductor quantum dots, can be used in quantum counterparts of the classical heat engines. After a recap of the basics of classical heat engines, this review explores the theoretical foundations and advancements of quantum heat engines, focusing on the proposed two- and multilevel systems used as the working medium for the quantum Otto cycle, which is the ideal thermodynamic cycle that describes the operation of a spark-ignition internal combustion engine. The review compares the efficiency and the work extraction of these systems, discussing their performance in the high- and low-temperature limits. Alternative cycles and engines are also presented to establish the adaptability of the working media when operating under different processes and non-equilibrium conditions. In conclusion, the review offers possible applications and future developments of quantum heat engines.
We propose a finite-time quantum Szilard engine (QSE) with a spin-1/2 quantum particle as the working substance (WS) to accelerate the operation of information engines. We introduce a Maxwell's demon (MD) to probe the spin state within a finite measurement time t M to capture the which-way information of the particle, quantified by the mutual information I ( t M ) between WS and MD. We establish that the efficiency η of QSE is bounded by η ≤ 1 − ( 1 − η C ) ln 2 / I ( t M ) , where I ( t M ) / ln 2 characterizes the ideality of quantum measurement, and approaches 1 for the Carnot efficiency reached under ideal measurement in quasistatic regime. We find that the output power of QSE scales as P O ∝ t M 3 in the short-time regime and as P O ∝ t M − 1 in the long-time regime. Additionally, considering the energy cost for erasing the MD's memory required by Landauer's principle, there exists a threshold time that guarantees QSE to output positive work. Published by the American Physical Society 2024
We consider measurement based single temperature quantum heat engine without feedback control, introduced recently by Yi, Talkner and Kim [Phys. Rev. E 96, 022108 (2017)]. Taking the working medium of the engine to be a one-dimensional Heisenberg model of two spins, we calculate the efficiency of the engine undergoing a cyclic process. Starting with two spin-1/2 particles, we investigate the scenario of higher spins also. We show that, for this model of coupled working medium, efficiency can be higher than that of an uncoupled one. However, the relationship between the coupling constant and the efficiency of the engine is rather involved. We find that in the higher spin scenario efficiency can sometimes be negative (this means work has to be done to run the engine cycle) for certain range of coupling constants, in contrast to the aforesaid work of Yi, Talkner and Kim, where they showed that the extracted work is always positive in the absence of coupling. We provide arguments for this negative efficiency in higher spin scenarios. Interestingly, this happens only in the asymmetric scenarios, where the two spins are different. Given these facts, for judiciously chosen conditions, an engine with coupled working medium gives advantage for the efficiency over the uncoupled one.