Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2201.03845 · Journal of Physics B Atomic Molecular and Optical Physics

An atom passing through a hole in a dielectric membrane: impact of dispersion forces on mask-based matter-wave lithography

Johannes Fiedler, Bodil Holst

Published Jan 13, 2022• 14 citations
arXivHTMLPDF

Abstract

Abstract Fast, large area patterning of arbitrary structures down to the nanometre scale is of great interest for a range of applications including the semiconductor industry, quantum electronics, nanophotonics and others. It was recently proposed that nanometre-resolution mask lithography can be realised by sending metastable helium atoms through a binary holography mask consisting of a pattern of holes. However, these first calculations were done using a simple scalar wave approach, which did not consider the dispersion force interaction between the atoms and the mask material. To access the true potential of the idea, it is necessary to access how this interaction affects the atoms. Here we present a theoretical study of the dispersion force interaction between an atom and a dielectric membrane with a hole. We look at metastable and ground state helium, using experimentally realistic wavelengths (0.05–1 nm) and membrane thicknesses (5–50 nm). We find that the effective hole radius is reduced by around 1–7 nm for metastable helium and 0.5–3.5 nm for ground-state helium. As expected, the reduction is largest for thick membranes and slow atoms.

DOI
10.1088/1361-6455/ac4b41

Related papers

Atomic diffraction by patterned holes in hexagonal boron nitride: A comparison between semi-classical and quantum computational models (a)

Eivind Kristen Osestad, Ekaterina Zossimova, Michael Walter +1 more

Abstract The diffraction of atoms and molecules through tiny, sub-nanometre holes in atomically thin membranes is a promising approach for advancing atom interferometry sensing and atomic holography. However, dispersion interactions, such as the Casimir-Polder force, pose a significant challenge by attracting diffracting particles to the membrane, limiting the minimum hole size. This paper presents a numerical simulation of helium matter-wave diffraction through sub-nanometre holes in hexagonal boron nitride by solving the time-dependent Schrödinger equation. Our results show that the transmission rates in the quantum approach are significantly higher than those predicted by the commonly used semi-classical approach. This suggests that significantly smaller holes can be used in the design of diffractive masks, provided that fabrication techniques can meet the atomic-level precision to realise such holes. Furthermore, we observe notable differences in diffraction patterns, even for atom velocities that are much greater than the expected convergence threshold between semi-classical and quantum computational models.

arXiv:2509.08336•Europhysics Letters (EPL)•Aug 8, 2025•1 citation

Realistic mask generation for matter-wave lithography via machine learning

Johannes Fiedler, Adrià Salvador Palau, Eivind Kristen Osestad +2 more

Abstract Fast production of large-area patterns is crucial for the established semiconductor industry and enables industrial-scale production of next-generation quantum devices. Metastable atom lithography with binary holography masks has been suggested as a higher resolution/low-cost alternative to the current state of the art: extreme ultraviolet lithography. However, it was recently shown that the interaction of the metastable atoms with the mask material (SiN) leads to a strong perturbation of the wavefront, not included in the existing mask generation theory, which is based on classical scalar waves. This means that the inverse problem (creating a mask based on the desired pattern) cannot be solved analytically, even in 1D. Here we present a machine-learning approach to mask generation targeted for metastable atoms. Our algorithm uses a combination of genetic optimisation and deep learning to obtain the mask. A novel deep neural architecture is trained to produce an initial approximation of the mask. This approximation is then used to generate the initial population of the genetic optimisation algorithm that can converge to arbitrary precision. We demonstrate the generation of arbitrary 1D patterns for system dimensions within the Fraunhofer approximation limit.

arXiv:2207.08723•Machine Learning Science and Technology•May 26, 2023•0 citations

Nanometer-Resolution Mask Lithography with Matter Waves: Near-Field Binary Holography

Torstein Nesse, Ingve Simonsen, Bodil Holst

Mask-based pattern generation is a crucial step in microchip production, but there are many technical challenges in scaling current techniques down to nanometer resolution. Lithography using metastable atoms has been suggested as a cost-effective, less complex alternative to conventional techniques, including extreme ultraviolet (EUV) photolithography. This study presents a method based on binary holography that can be used to shape atom beams into arbitrary patterns. Simulations demonstrate the potential for state-of-the-art helium sources to produce patterns with nanometer resolution.

arXiv:1804.06910•Physical Review Applied•Feb 5, 2019•14 citations

Atomic diffraction by nanoholes in hexagonal boron nitride

Eivind Kristen Osestad, Ekaterina Zossimova, Michael Walter +2 more

Fabricating patterned nanostructures with matter waves can help to realise new nanophotonic devices. However, due to dispersion effects, designing patterns with nanoscale features is challenging. Here, we consider the propagation of a helium matter wave through different holes in hexagonal boron nitride (h-BN) as a case study for the weakest dispersion interaction and the matter wave's diffraction as it passes through the holes. We use a quantum-mechanical model to calculate the polarisability of edge atoms around the holes, where we observe polarisation ripples of enhanced and reduced polarisabilities around the holes. We use these values to calculate van der Waals dispersion coefficients for the scattered helium atoms. We find that the resulting diffraction patterns are affected by the shape and size of the holes, where the smallest holes have a radius of just 6 Å. These results can be used to predict the resolution limits of nano-hole patterns on nanophotonic materials.

arXiv:2406.16543•Nanoscale Advances•Jan 1, 2024•2 citations

Optimal Design of Grid-Based Binary Holograms for Matter-Wave Lithography

Torstein Nesse, Jean-Philippe Banon, Bodil Holst +1 more

Due to their very short de Broglie wavelengths, matter waves could be used for high-resolution patterning, competing with $e.g.$ e-beam or helium-ion lithography for producing features smaller than 10 nm. Binary holography is presently the only method available for mask-based atom lithography, but its theoretical framework has remained quite limited. The authors present an optimal method for making binary holograms that can shape atom beams arbitrarily, allowing for free selection of the geometrical properties of the generated masks, and the resulting structures.

arXiv:1703.09941•Physical Review Applied•Aug 17, 2017•8 citations

Atom Nanolithography with Atom Pinhole Camera

V. I. Balykin, P. A. Borisov, Vladilen S Letokhov +6 more

The most efficient method for controlling the motion of material particles in experimental physics is the use of interaction potentials with electromagnetic fields. The static magnetic and electric interaction potentials are used in the optics of charged particles. In the optics of neutral atoms, the various interaction potentials of atoms with laser and electromagnetic fields are used in addition to the static fields. The effective methods of diffraction, interference, mirror reflection of atoms are implemented in atom optics. The most difficult problem in atom optics is the problem of high-resolution focusing of neutral atoms, which is promising for the nondestructive method for probing the surface at the atomic level, as well as for the creation of nanostructures on the surface. Although there are many proposals for focusing of atomic beams, this problem is experimentally unsolved. The main difficulty is the creation of the interaction potential of the atom with the electromagnetic field that is close to an ideal lens for atoms.In this paper, we experimentally implement another approach to the problem of focusing and construction of an image in atom optics, which is based on a well known idea of optical pinhole camera. The pinhole camera in optics is a camera without lens. Light forming an image passes through a small hole. In our experiment with the atom pinhole camera the Cr atomic beam passes through a set of holes in a metal mask and thereby forms, by analogy with optics, a glowing object of a given geometry. The atoms pass through the holes in the mask, propagate in vacuum along rectilinear trajectories, similar to light rays, and are incident on a thin film (thickness 5 mum) placed at a distance of 90 mm from the mask with a large number (n =107-108/cm2) of nanoholes (50 nm diameter). Each hole of the film is a pinhole camera for atoms, which forms its individual image of the object on the substrate surface placed at a distance of l = 5mum behind the film.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2007•0 citations
Abstract Fast, large area patterning of arbitrary structures down to the nanometre scale is of great interest for a range of applications including the semiconductor industry, quantum electronics, nanophotonics and others. It was recently proposed that nanometre-resolution mask lithography can be realised by sending metastable helium atoms through a binary holography mask consisting of a pattern of holes. However, these first calculations were done using a simple scalar wave approach, which did not consider the dispersion force interaction between the atoms and the mask material. To access the true potential of the idea, it is necessary to access how this interaction affects the atoms. Here we present a theoretical study of the dispersion force interaction between an atom and a dielectric membrane with a hole. We look at metastable and ground state helium, using experimentally realistic wavelengths (0.05–1 nm) and membrane thicknesses (5–50 nm). We find that the effective hole radius is reduced by around 1–7 nm for metastable helium and 0.5–3.5 nm for ground-state helium. As expected, the reduction is largest for thick membranes and slow atoms.
Abstract The diffraction of atoms and molecules through tiny, sub-nanometre holes in atomically thin membranes is a promising approach for advancing atom interferometry sensing and atomic holography. However, dispersion interactions, such as the Casimir-Polder force, pose a significant challenge by attracting diffracting particles to the membrane, limiting the minimum hole size. This paper presents a numerical simulation of helium matter-wave diffraction through sub-nanometre holes in hexagonal boron nitride by solving the time-dependent Schrödinger equation. Our results show that the transmission rates in the quantum approach are significantly higher than those predicted by the commonly used semi-classical approach. This suggests that significantly smaller holes can be used in the design of diffractive masks, provided that fabrication techniques can meet the atomic-level precision to realise such holes. Furthermore, we observe notable differences in diffraction patterns, even for atom velocities that are much greater than the expected convergence threshold between semi-classical and quantum computational models.
Abstract Fast production of large-area patterns is crucial for the established semiconductor industry and enables industrial-scale production of next-generation quantum devices. Metastable atom lithography with binary holography masks has been suggested as a higher resolution/low-cost alternative to the current state of the art: extreme ultraviolet lithography. However, it was recently shown that the interaction of the metastable atoms with the mask material (SiN) leads to a strong perturbation of the wavefront, not included in the existing mask generation theory, which is based on classical scalar waves. This means that the inverse problem (creating a mask based on the desired pattern) cannot be solved analytically, even in 1D. Here we present a machine-learning approach to mask generation targeted for metastable atoms. Our algorithm uses a combination of genetic optimisation and deep learning to obtain the mask. A novel deep neural architecture is trained to produce an initial approximation of the mask. This approximation is then used to generate the initial population of the genetic optimisation algorithm that can converge to arbitrary precision. We demonstrate the generation of arbitrary 1D patterns for system dimensions within the Fraunhofer approximation limit.
Mask-based pattern generation is a crucial step in microchip production, but there are many technical challenges in scaling current techniques down to nanometer resolution. Lithography using metastable atoms has been suggested as a cost-effective, less complex alternative to conventional techniques, including extreme ultraviolet (EUV) photolithography. This study presents a method based on binary holography that can be used to shape atom beams into arbitrary patterns. Simulations demonstrate the potential for state-of-the-art helium sources to produce patterns with nanometer resolution.
Fabricating patterned nanostructures with matter waves can help to realise new nanophotonic devices. However, due to dispersion effects, designing patterns with nanoscale features is challenging. Here, we consider the propagation of a helium matter wave through different holes in hexagonal boron nitride (h-BN) as a case study for the weakest dispersion interaction and the matter wave's diffraction as it passes through the holes. We use a quantum-mechanical model to calculate the polarisability of edge atoms around the holes, where we observe polarisation ripples of enhanced and reduced polarisabilities around the holes. We use these values to calculate van der Waals dispersion coefficients for the scattered helium atoms. We find that the resulting diffraction patterns are affected by the shape and size of the holes, where the smallest holes have a radius of just 6 Å. These results can be used to predict the resolution limits of nano-hole patterns on nanophotonic materials.
Due to their very short de Broglie wavelengths, matter waves could be used for high-resolution patterning, competing with e.g.e.g.e.g. e-beam or helium-ion lithography for producing features smaller than 10 nm. Binary holography is presently the only method available for mask-based atom lithography, but its theoretical framework has remained quite limited. The authors present an optimal method for making binary holograms that can shape atom beams arbitrarily, allowing for free selection of the geometrical properties of the generated masks, and the resulting structures.
The most efficient method for controlling the motion of material particles in experimental physics is the use of interaction potentials with electromagnetic fields. The static magnetic and electric interaction potentials are used in the optics of charged particles. In the optics of neutral atoms, the various interaction potentials of atoms with laser and electromagnetic fields are used in addition to the static fields. The effective methods of diffraction, interference, mirror reflection of atoms are implemented in atom optics. The most difficult problem in atom optics is the problem of high-resolution focusing of neutral atoms, which is promising for the nondestructive method for probing the surface at the atomic level, as well as for the creation of nanostructures on the surface. Although there are many proposals for focusing of atomic beams, this problem is experimentally unsolved. The main difficulty is the creation of the interaction potential of the atom with the electromagnetic field that is close to an ideal lens for atoms.In this paper, we experimentally implement another approach to the problem of focusing and construction of an image in atom optics, which is based on a well known idea of optical pinhole camera. The pinhole camera in optics is a camera without lens. Light forming an image passes through a small hole. In our experiment with the atom pinhole camera the Cr atomic beam passes through a set of holes in a metal mask and thereby forms, by analogy with optics, a glowing object of a given geometry. The atoms pass through the holes in the mask, propagate in vacuum along rectilinear trajectories, similar to light rays, and are incident on a thin film (thickness 5 mum) placed at a distance of 90 mm from the mask with a large number (n =107-108/cm2) of nanoholes (50 nm diameter). Each hole of the film is a pinhole camera for atoms, which forms its individual image of the object on the substrate surface placed at a distance of l = 5mum behind the film.