Abstract Executing quantum algorithms on error-corrected logical qubits is a critical step for scalable quantum computing, but the requisite numbers of qubits and physical error rates are demanding for current experimental hardware. Recently, the development of error correcting codes tailored to particular physical noise models has helped relax these requirements. In this work, we propose a qubit encoding and gate protocol for 171 Yb neutral atom qubits that converts the dominant physical errors into erasures, that is, errors in known locations. The key idea is to encode qubits in a metastable electronic level, such that gate errors predominantly result in transitions to disjoint subspaces whose populations can be continuously monitored via fluorescence. We estimate that 98% of errors can be converted into erasures. We quantify the benefit of this approach via circuit-level simulations of the surface code, finding a threshold increase from 0.937% to 4.15%. We also observe a larger code distance near the threshold, leading to a faster decrease in the logical error rate for the same number of physical qubits, which is important for near-term implementations. Erasure conversion should benefit any error correcting code, and may also be applied to design new gates and encodings in other qubit platforms.
Abstract Executing quantum algorithms on error-corrected logical qubits is a critical step for scalable quantum computing, but the requisite numbers of qubits and physical error rates are demanding for current experimental hardware. Recently, the development of error correcting codes tailored to particular physical noise models has helped relax these requirements. In this work, we propose a qubit encoding and gate protocol for 171 Yb neutral atom qubits that converts the dominant physical errors into erasures, that is, errors in known locations. The key idea is to encode qubits in a metastable electronic level, such that gate errors predominantly result in transitions to disjoint subspaces whose populations can be continuously monitored via fluorescence. We estimate that 98% of errors can be converted into erasures. We quantify the benefit of this approach via circuit-level simulations of the surface code, finding a threshold increase from 0.937% to 4.15%. We also observe a larger code distance near the threshold, leading to a faster decrease in the logical error rate for the same number of physical qubits, which is important for near-term implementations. Erasure conversion should benefit any error correcting code, and may also be applied to design new gates and encodings in other qubit platforms.
Quantum computing experiments are transitioning from running on physical qubits to using encoded, logical qubits. Fault-tolerant computation can identify and correct errors, and has the potential to enable the dramatically reduced logical error rates required for valuable algorithms. However, it requires flexible control of high-fidelity operations performed on large numbers of qubits. We demonstrate fault-tolerant quantum computation on a quantum processor with 256 qubits, each an individual neutral Ytterbium atom. The operations are designed so that key error sources convert to atom loss, which can be detected by imaging. Full connectivity is enabled by atom movement. We demonstrate the entanglement of 24 logical qubits encoded into 48 atoms, at once catching errors and correcting for, on average 1.8, lost atoms. We also implement the Bernstein-Vazirani algorithm with up to 28 logical qubits encoded into 112 atoms, showing better-than-physical error rates. In both cases, "erasure conversion," changing errors into a form that can be detected independently from qubit state, improves circuit performance. These results begin to clear a path for achieving scientific quantum advantage with a programmable neutral atom quantum processor.
Erasures, or errors with known locations, are a more favorable type of error for quantum error-correcting codes than Pauli errors.Converting physical noise into erasures can significantly improve the performance of quantum error correction.Here, we apply the idea of performing erasure conversion by encoding qubits into metastable atomic states, proposed by Wu, Kolkowitz, Puri, and Thompson [Nat.Comm.13, 4657 (2022)], to trapped ions.We suggest an erasure-conversion scheme for metastable trapped-ion qubits and develop a detailed model of various types of errors.We then compare the logical performance of ground and metastable qubits on the surface code under various physical constraints and conclude that metastable qubits may outperform ground qubits when the achievable laser power is higher for metastable qubits.
The requirements for fault-tolerant quantum error correction can be simplified by leveraging structure in the noise of the underlying hardware.In this work, we identify a new type of structured noise motivated by neutral-atom qubits, biased erasure errors, which arises when qubit errors are dominated by detectable leakage from only one of the computational states of the qubit.We study the performance of this model using gate-level simulations of the XZZX surface code.Using the predicted erasure fraction and bias of metastable 171 Yb qubits, we find a threshold of 8.2% for two-qubit gate errors, which is 1.9 times higher than the threshold for unbiased erasures and 7.5 times higher than the threshold for depolarizing errors.Surprisingly, the improved threshold is achieved without bias-preserving controlled-NOT gates and, instead, results from the lower noise entropy in this model.We also introduce an XZZX cluster state construction for measurement-based error correction, hybrid fusion, that is optimized for this noise model.By combining fusion operations and deterministic entangling gates, this construction preserves the intrinsic symmetry of the XZZX code, leading to a higher threshold of 10.3% and enabling the use of rectangular codes with fewer qubits.We discuss a potential physical implementation using a single plane of atoms and movable tweezers.
An error whose location is known is far cheaper to correct than an error that must first be found: pure erasure channels tolerate error rates several times higher than Pauli channels, a fact known since the earliest threshold studies. Erasure conversion, engineering a qubit so that its dominant failures announce themselves, therefore buys fault tolerance with information rather than with distance. This paper budgets the purchase. If ninety per cent of a platform's errors are converted to located erasures, the unlocated residue falls from 1.00e-3 to 1.00e-4, and the effective threshold for the mixed channel rises by a factor of about 4 over the purely unlocated figure. Priced through the standard scaling ansatz, the conversion is worth several units of code distance at fixed logical quality, which at algorithmic distances is worth a third or more of the machine. The paper reviews the hardware routes that deliver conversion, dual-rail superconducting qubits, metastable-state ions and loss-detecting atom encodings, and charges each route its conversion overhead.
Programmable neutral atom arrays show great promise for fault-tolerant quantum computing. A dominant physical error on this platform is qubit leakage and loss, notably decay errors from the Rydberg state during two-qubit gates. Such leakage events are particularly detrimental as they propagate, generating correlated errors that severely degrade the effective error distance of quantum error correction codes. Here, we present a novel approach to address Rydberg decay errors leveraging measurement-based quantum computation. Our scheme strategically exploits the inherent geometric structure of topological cluster states and only uses final leakage detection information to locate propagated errors originating from Rydberg decay. This eliminates the need for complex and atom-species-specific midcircuit leakage detection, offering broader applicability, e.g., to the well-established Rb atom platform. We demonstrate a high error threshold of 3.65% per cz gate for pure Rydberg decay and achieve a favorable error distance d_{e}≈d. Our method compares favorably with state-of-the-art erasure conversion protocols in the subthreshold performance, offering comparable or marginally larger logical error rates while significantly reducing experimental overhead.
Quantum computers are inherently noisy, and a crucial challenge for achieving large-scale, fault-tolerant quantum computing is to implement quantum error correction. A promising direction that has made rapid recent progress is to design hardware that has a specific noise profile, leading to a significantly higher threshold for noise with certain quantum error correcting codes. This Perspective focuses on erasure qubits, which enable hardware-efficient quantum error correction, by concatenating an inner code built-in to the hardware with an outer code. We focus on implementations of dual-rail encoded erasure qubits using superconducting qubits, giving an overview of recent developments in theory and simulation, and hardware demonstrators. We also discuss the differences between implementations; near-term applications using quantum error detection; and the open problems for developing this approach towards early fault-tolerant quantum computers.