Practical distributed quantum computing requires the development of efficient compilers, able to make quantum circuits compatible with some given hardware constraints. This problem is known to be tough, even for local computing. Here, we address it on distributed architectures. As generally assumed in this scenario, telegates represent the fundamental remote (inter-processor) operations. Each telegate consists of several tasks: (i) entanglement generation and distribution, (ii) local operations, and (iii) classical communications. Entanglement generations and distribution is an expensive resource, as it is time-consuming. To mitigate its impact, we model an optimization problem that combines running-time minimization with the usage of distributed entangled states. Specifically, we formulated the distributed compilation problem as a dynamic network flow. To enhance the solution space, we extend the formulation, by introducing a predicate that manipulates the circuit given in input and parallelizes telegate tasks. To evaluate our framework, we split the problem into three sub-problems, and solve it by means of an approximation routine. Experiments demonstrate that the run-time is resistant to the problem size scaling. Moreover, we apply the proposed algorithm to compile circuits under different topologies, showing that topologies with a higher ratio between edges and nodes give rise to shallower circuits.
Practical distributed quantum computing requires the development of efficient compilers, able to make quantum circuits compatible with some given hardware constraints. This problem is known to be tough, even for local computing. Here, we address it on distributed architectures. As generally assumed in this scenario, telegates represent the fundamental remote (inter-processor) operations. Each telegate consists of several tasks: (i) entanglement generation and distribution, (ii) local operations, and (iii) classical communications. Entanglement generations and distribution is an expensive resource, as it is time-consuming. To mitigate its impact, we model an optimization problem that combines running-time minimization with the usage of distributed entangled states. Specifically, we formulated the distributed compilation problem as a dynamic network flow. To enhance the solution space, we extend the formulation, by introducing a predicate that manipulates the circuit given in input and parallelizes telegate tasks. To evaluate our framework, we split the problem into three sub-problems, and solve it by means of an approximation routine. Experiments demonstrate that the run-time is resistant to the problem size scaling. Moreover, we apply the proposed algorithm to compile circuits under different topologies, showing that topologies with a higher ratio between edges and nodes give rise to shallower circuits.
For most practical applications, quantum algorithms require large resources in terms of qubit number, much larger than those available with current NISQ processors. With the network and communication functionalities provided by the Quantum Internet, Distributed Quantum Computing (DQC) is considered as a scalable approach for increasing the number of available qubits for computational tasks. For DQC to be effective and efficient, a quantum compiler must find the best partitioning for the quantum algorithm and then perform smart remote operation scheduling to optimize EPR pair consumption. At the same time, the quantum compiler should also find the best local transformation for each partition. In this paper we present a modular quantum compilation framework for DQC that takes into account both network and device constraints and characteristics. We implemented and tested a quantum compiler based on the proposed framework with some circuits of interest, such as the VQE and QFT ones, considering different network topologies, with quantum processors characterized by heavy-hexagon coupling maps. We also devised a strategy for remote scheduling that can exploit both TeleGate and TeleData operations and tested the impact of using either only TeleGates or both. The evaluation results show that TeleData operations can have a positive impact on the number of consumed EPR pairs, depending on the characteristic of compiled circuit. Meanwhile, choosing a more connected network topology helps reduce the number of layers dedicated to remote operations.
Quantum algorithms require large resources in terms of qubit number, much larger than those available with current NISQ processors. With the network and communication functionalities provided by the Quantum Internet, Distributed Quantum Computing (DQC) is considered as a scalable approach for increasing the number of available qubits for computational tasks. For DQC to be effective and efficient, a quantum compiler must find the best partitioning for the quantum algorithm and then perform smart remote operation scheduling to optimize EPR pair consumption. At the same time, the quantum compiler should also find the best local transformation for each partition. In this paper we present a modular quantum compilation framework for DQC that takes into account both network and device constraints and characteristics. We implemented and tested a quantum compiler based on the proposed framework with some circuits of interest, such as the VQE and QFT ones, considering different network topologies, with quantum processors characterized by heavy hexagon coupling maps. We also devised a strategy for remote scheduling that can exploit both TeleGate and TeleData operations and tested the impact of using either only TeleGates or both. The evaluation results show that TeleData operations may have a positive impact on the number of consumed EPR pairs, while choosing a more connected network topology helps reduce the number of layers dedicated to remote operations. Keywords— Distributed quantum computing (DQC), quantum compilation, quantum Internet
The emerging paradigm of distributed quantum computing promises a potential solution to scaling quantum computing to currently unfeasible dimensions. While this approach itself is still in its infancy, and many obstacles must still be overcome before its physical implementation, challenges from the software and algorithmic side must also be identified and addressed. For instance, this paradigm shift requires a new form of compiler that considers the network constraints in general as well as phenomena arising due to the nature of quantum communication. In distributed quantum computing, large circuits are divided into smaller subcircuits such that they can be executed individually and simultaneously on multiple QPUs that are connected through quantum channels. As quantum communication, for example, in the form of teleportation, is expensive, it must be used sparingly. We address the problem of assigning qubits to QPUs to minimize communication costs in two different ways. First by applying time-aware algorithms that take into account the changing connectivity of a given circuit as well as the underlying network topology. We define the optimization problem, use simulated annealing and an evolutionary algorithm and compare the results to graph partitioning and sequential qubit assignment baselines. In another approach, we propose an evolutionary-based quantum circuit optimization algorithm that adjusts the circuit itself rather than the schedule to reduce the overall communication cost. We evaluate the techniques against random circuits and different network topologies. Both evolutionary algorithms outperform the baseline in terms of communication cost reduction. We give an outlook on how the approaches can be integrated into a compilation framework for distributed quantum computing.
Quantum computing is a promising paradigm for problems that are challenging for classical machines, but realizing that promise requires far more qubits than a single processor can offer. Distributed quantum computing (DQC) scales out by connecting multiple quantum processing units (QPUs), at the cost of making entanglement the scarce resource: every remote gate consumes a Bell pair, and inter-QPU links generate Bell pairs at finite rates orders of magnitude slower than local gates. Since quantum programs are executed repeatedly, this rate bounds how fast shots complete and thus how fast results are obtained. Existing DQC compilers emit a single implementation per circuit, so throughput is capped by its busiest link while other links stay idle. We observe that alternative compilations of the same circuit are logically equivalent yet stress different links; executing them concurrently and pooling their samples converts idle Bell pairs into additional shots. We formulate the joint selection of compilations and allocation of shots under per-link Bell-pair capacities as Candidate-Constrained Max-Shot Allocation (CMA), prove it NP-hard, and solve it with a dynamic program and its approximate variant AppDP, a compact MILP, and a greedy heuristic Effi. In simulation on six-QPU networks, multi-compilation raises throughput by 2-4.5* over the single compilation and correspondingly improves output fidelity under equal Bell-pair budgets. On hardware, it increases measured fidelity by up to 93% and reaches the single-compilation fidelity in up to 10* less time. Scaling to 36 QPUs and 144-qubit circuits, MILP improves throughput over the single compilation by 76.8% on average across 48 configurations while Effi allocates in milliseconds.
Quantum computing has the potential to outperform classical computing in solving specific problems. However, the limited qubit capacity of existing Quantum Processing Units (QPUs) poses significant barriers to the practical implementation of quantum computing. Distributed quantum computing (DQC) offers a promising approach to scaling the qubit capacity of quantum systems by interconnecting multiple QPUs and enabling collaborative computation. Nevertheless, DQC necessitates implementing remote quantum gate operations that consume entangled qubit pairs, which poses a significant challenge for DQC. In this work, we formulate and investigate the remote gate scheduling (RGS) problem, considering two approaches for remote gate operations: Telegate and Teledata. We propose a hybrid heuristic algorithm that dynamically schedules quantum gate operations within a circuit, executed on distributed QPUs, while minimizing entanglement consumption. We conducted extensive simulations using real-world quantum circuits and processors to evaluate the proposed approach. The results show that our approach reduces entanglement consumption by up to 90% and 25% compared to the two baselines, Telegate-SA and Teledata-ZS, respectively. Furthermore, the execution time of our approach is significantly shorter than that of the baselines.
As distributed quantum architectures begin to emerge, understanding the interaction between quantum circuit optimisation and circuit partitioning becomes increasingly important. In this work, we study how circuit optimisation influences distributed quantum workloads under system-level trade-offs. We compare three compilation strategies (global optimisation, local optimisation, and a hybrid approach) across a large benchmark suite of quantum algorithms. Using telegate-based partitioning, we evaluate the resulting distributed circuits in terms of gate counts, circuit depth, the number of induced non-local gates, and compilation overhead, thereby approximating computational, communication, and classical preprocessing costs. Our results show that circuit optimisation does not uniformly benefit distributed execution. Global optimisation minimises computational resources and achieves the lowest compilation overhead. Local optimisation can reduce communication cost even though it is not explicitly communication-aware. The hybrid strategy can simultaneously reduce both computational and communication overhead, but at the expense of significantly increased compilation time.