Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2112.07260 · New Journal of Physics

Proximal nitrogen reduces the fluorescence quantum yield of nitrogen-vacancy centres in diamond

Marco Capelli, Lukas Lindner, Tingpeng Luo, Jan Jeske, Hiroshi Abe, Shinobu Onoda, Takeshi Ohshima, Brett C. Johnson, David Simpson, Alastair D. Stacey, Philipp Reineck, Brant C. Gibson, Andrew D. Greentree

Published Mar 1, 2022• 25 citations
arXivHTMLPDF

Abstract

Abstract The nitrogen-vacancy colour centre in diamond is emerging as one of the most important solid-state quantum systems. It has applications to fields including high-precision sensing, quantum computing, single photon communication, metrology, nanoscale magnetic imaging and biosensing. For all of these applications, a high quantum yield of emitted photons is desirable. However, diamond samples engineered to have high densities of nitrogen-vacancy centres show levels of brightness varying significantly within single batches, or even within the same sample. Here we show that nearby nitrogen impurities quench emission of nitrogen-vacancy centres via non-radiative transitions, resulting in a reduced fluorescence quantum yield. We monitored the emission properties of nitrogen-vacancy centre ensembles from synthetic diamond samples with different concentrations of nitrogen impurities. All samples were irradiated with high energy electrons to create high densities of nitrogen-vacancy centres relative to the concentration of nitrogen impurities. While at low nitrogen densities of 1.81 ppm we measured a lifetime of 13.9 ns, we observed a strong reduction in lifetime with increasing nitrogen density. We measure a lifetime as low as 4.4 ns at a nitrogen density of 380 ppm. The change in lifetime matches a reduction in relative fluorescence quantum yield from 77.4% to 32% with an increase in nitrogen density from 88 ppm to 380 ppm, respectively. These results will inform the conditions required to optimise the properties of diamond crystals devices based on the fluorescence of nitrogen-vacancy centres. Furthermore, this work provides insights into the origin of inhomogeneities observed in high-density nitrogen-vacancy ensembles within diamonds and nanodiamonds.

DOI
10.1088/1367-2630/ac5ca9

Related papers

The effect of nitrogen concentration on quantum sensing with nitrogen-vacancy centres

Marco Capelli, Abe, Hiroshi, Takeshi Ohshima +6 more

The nitrogen-vacancy (NV) centre in diamond is a perfect candidate for quantum sensing applications applied to numerous fields of science. Past studies improved the sensitivity of diamonds containing NV centres by increasing their density or prolonging their coherence time. However, few studies discussed the effects of other defects inside the diamond crystal on the sensitivity of the NV centres. In this study, we demonstrated the implication of single substitutional nitrogen defects on the fluorescence emission, charge state stability, coherence time and sensitivity of the NV centres. We found that there is an optimal concentration of nitrogen defects that allows diamond samples to have a high-density of NV centres and high fluorescence without significantly affecting the coherence time. This results will inform the correct choice of diamond characteristics for current and future quantum sensing applications with the NV centres.

•Jan 1, 2020•0 citations

The effect of nitrogen concentration on quantum sensing with nitrogen-vacancy centres

Marco Capelli, Hiroshi Abe, Takeshi Ohshima +6 more

The nitrogen-vacancy (NV) centre in diamond is a perfect candidate for quantum sensing applications applied to numerous fields of science. Past studies improved the sensitivity of diamonds containing NV centres by increasing their density or prolonging their coherence time. However, few studies discussed the effects of other defects inside the diamond crystal on the sensitivity of the NV centres. In this study, we demonstrated the implication of single substitutional nitrogen defects on the fluorescence emission, charge state stability, coherence time and sensitivity of the NV centres. We found that there is an optimal concentration of nitrogen defects that allows diamond samples to have a high-density of NV centres and high fluorescence without significantly affecting the coherence time. This results will inform the correct choice of diamond characteristics for current and future quantum sensing applications with the NV centres.

Biophotonics Australasia•Dec 30, 2019•0 citations

Characterization and optimization of NV centers in CVD diamond for sensing applications

Tingpeng Luo, Lukas Lindner, Julia Langer +13 more

The negatively charged nitrogen-vacancy (NV-) center in diamond is a promising spin system for quantum sensing applications. NV-ensembles are favored for an improved signal-to-noise ratio and sensitivity. The optimization of diamond with NV-ensembles often requires a high NV concentration, a long spin coherence time T2 and a stable charge state. However, these key requirements are interdependent and can be difficult to optimize: nitrogen impurities as the main decoherence source of the NV spin limits the coherence time T2, and pursuing high NV concentration can deteriorate the NV-charge-state stability. Consequently, their best achievable combination becomes an essential question for the material characterization. In this work, we systematically investigate the NV center creation and properties in chemical vapor deposition (CVD) diamond. We have grown CVD diamond series with a varying nitrogen flow over four orders of magnitude, leading to a broad range of single substitutional nitrogen (P1 center) densities from 0.2 to 20 ppm. On these series, we study P1, NV creations and NV charge states after growth, as well as their transformation under subsequent electron beam irradiation. Furthermore, for a fixed nitrogen concentration, we optimize electron-irradiation fluences with two different accelerated electron energies. We discuss a general approach to determine the optimal irradiation conditions, for which an enhanced NV concentration and an optimum of NV charge states can both be satisfied. Moreover, through irradiation and annealing treatments, we monitor the change in T2 and aim to increase the NV density without compromising T2. We achieve NV concentrations from 1 to 168 ppb with T2 from 549 to 45.5 µs respectively. This study shows a pathway to engineer properties of NV-doped CVD diamonds for improved sensitivity.

•Jun 8, 2022•0 citations

Chemical vapour deposition diamond single crystals with nitrogen-vacancy centres: a review of material synthesis and technology for quantum sensing applications

Jocelyn Achard, V. Jacques, Alexandre Tallaire

Abstract Diamond hosts a wide variety of colour centres that have demonstrated outstanding optical and spin properties. Among them, the nitrogen-vacancy (NV) centre is by far the most investigated owing to its superior characteristics, which promise the development of highly sophisticated quantum devices, in particular for sensing applications. Nevertheless, harnessing the potential of these centres mainly relies on the availability of high quality and purity diamond single crystals that need to be specially designed and engineered for this purpose. Plasma assisted chemical vapour deposition (CVD) has become a key enabling technology in this field of research. Nitrogen can indeed be directly doped in situ into a high crystalline quality diamond matrix in a controlled way, allowing the production of single isolated centres or ensembles that can potentially be integrated into a device. In this paper we will provide an overview of the requirements for synthesizing ‘quantum-grade’ diamond films using CVD. These include the reduction of impurities and surrounding spins that limit coherence times, the control of NV density in a wide range of concentrations as well as their spatial localization within the diamond. Enhancing the charge state and preferential orientation of the colour centres is also discussed. These improvements in material fabrication have contributed to positioning diamond as one of the most promising solid-state quantum systems and the first industrial applications in sensing are just starting to emerge.

arXiv:1912.09749•Journal of Physics D Applied Physics•Mar 20, 2020•136 citations

Engineering Nitrogen-Vacancy Centers in Nano-diamonds for Single Photon Emission

Ravi Kumar, Sung‐June Yoon, Kwanggeol Lee +4 more

Defects in diamond have evolved as unique object for their potential application for Optical imaging and Nano-photonics. High pressure high temperature (HPHT) grown type-Ib diamond particles were milled down to the size of ~ 80 nm and purified to remove iron & graphitic carbon impurities and irradiated with 35 KeV He+ ions to create vacancies in the diamond lattice. Vacancies diffuse close to substitutional nitrogen impurities of nano-diamond particles upon thermal treatment. Characteristic sharp emission of NV centers were observed at 575.5 nm and 637.9 nm corresponding to NV° and NV− charged states in addition to a broad emission in the range 550-750 nm. Structural and photo-physical behavior of these fluorescent diamonds was found to depend on the method of purification adopted. Samples purified through acid reflux were found suitable for bio-imaging applications while, sample purified through air oxidation shows properties desirable for Nano-photonic applications. Photon-correlation measurements of emission from individual diamond nanoparticles using Hanbury Brown and Twiss interferometer (HBT) shows anti-bunching curve with g2(t)= 0 confirming their suitability as single photon source. Such sources of indistinguishable photons are highly desirable for quantum computation and quantum optics applications.

International conference on fiber optics and photonics•Jan 1, 2016•0 citations

Native NIR-emitting single colour centres in CVD diamond

D. Gatto Monticone, P. Traina, Ekaterina V. Moreva +8 more

Single-photon sources are a fundamental element for developing quantum technologies, and sources based on colour centres in diamonds are among the most promising candidates. The well-known nitrogen vacancy centres are characterized by several limitations, and thus few other defects have recently been considered. In the present work, we characterize, in detail, native efficient single colour centres emitting in the near infra-red ( λ = 740–780 nm) in both standard IIa single-crystal and electronic-grade polycrystalline commercial chemical vapour deposited (CVD) diamond samples. In the former case, a high-temperature ( T > 1000 °C) annealing process in vacuum is necessary to induce the formation/activation of luminescent centres with good emission properties, while in the latter case the annealing process has marginally beneficial effects on the number and performance of native centres in commercially available samples. Although displaying significant variability in several photo-physical properties (emission wavelength, emission rate instabilities, saturation behaviours), these centres generally display appealing photophysical properties for applications as single photon sources: short lifetimes (0.7–3 ns), high emission rates (∼50–500 × 10 3 photons s −1 ) and strongly (>95%) polarized light. The native centres are tentatively attributed to impurities incorporated in the diamond crystal during the CVD growth of high-quality type-IIa samples, and offer promising perspectives in diamond-based photonics.

arXiv:1403.4394•New Journal of Physics•May 1, 2014•38 citations
Abstract The nitrogen-vacancy colour centre in diamond is emerging as one of the most important solid-state quantum systems. It has applications to fields including high-precision sensing, quantum computing, single photon communication, metrology, nanoscale magnetic imaging and biosensing. For all of these applications, a high quantum yield of emitted photons is desirable. However, diamond samples engineered to have high densities of nitrogen-vacancy centres show levels of brightness varying significantly within single batches, or even within the same sample. Here we show that nearby nitrogen impurities quench emission of nitrogen-vacancy centres via non-radiative transitions, resulting in a reduced fluorescence quantum yield. We monitored the emission properties of nitrogen-vacancy centre ensembles from synthetic diamond samples with different concentrations of nitrogen impurities. All samples were irradiated with high energy electrons to create high densities of nitrogen-vacancy centres relative to the concentration of nitrogen impurities. While at low nitrogen densities of 1.81 ppm we measured a lifetime of 13.9 ns, we observed a strong reduction in lifetime with increasing nitrogen density. We measure a lifetime as low as 4.4 ns at a nitrogen density of 380 ppm. The change in lifetime matches a reduction in relative fluorescence quantum yield from 77.4% to 32% with an increase in nitrogen density from 88 ppm to 380 ppm, respectively. These results will inform the conditions required to optimise the properties of diamond crystals devices based on the fluorescence of nitrogen-vacancy centres. Furthermore, this work provides insights into the origin of inhomogeneities observed in high-density nitrogen-vacancy ensembles within diamonds and nanodiamonds.
The nitrogen-vacancy (NV) centre in diamond is a perfect candidate for quantum sensing applications applied to numerous fields of science. Past studies improved the sensitivity of diamonds containing NV centres by increasing their density or prolonging their coherence time. However, few studies discussed the effects of other defects inside the diamond crystal on the sensitivity of the NV centres. In this study, we demonstrated the implication of single substitutional nitrogen defects on the fluorescence emission, charge state stability, coherence time and sensitivity of the NV centres. We found that there is an optimal concentration of nitrogen defects that allows diamond samples to have a high-density of NV centres and high fluorescence without significantly affecting the coherence time. This results will inform the correct choice of diamond characteristics for current and future quantum sensing applications with the NV centres.
The nitrogen-vacancy (NV) centre in diamond is a perfect candidate for quantum sensing applications applied to numerous fields of science. Past studies improved the sensitivity of diamonds containing NV centres by increasing their density or prolonging their coherence time. However, few studies discussed the effects of other defects inside the diamond crystal on the sensitivity of the NV centres. In this study, we demonstrated the implication of single substitutional nitrogen defects on the fluorescence emission, charge state stability, coherence time and sensitivity of the NV centres. We found that there is an optimal concentration of nitrogen defects that allows diamond samples to have a high-density of NV centres and high fluorescence without significantly affecting the coherence time. This results will inform the correct choice of diamond characteristics for current and future quantum sensing applications with the NV centres.
The negatively charged nitrogen-vacancy (NV-) center in diamond is a promising spin system for quantum sensing applications. NV-ensembles are favored for an improved signal-to-noise ratio and sensitivity. The optimization of diamond with NV-ensembles often requires a high NV concentration, a long spin coherence time T2 and a stable charge state. However, these key requirements are interdependent and can be difficult to optimize: nitrogen impurities as the main decoherence source of the NV spin limits the coherence time T2, and pursuing high NV concentration can deteriorate the NV-charge-state stability. Consequently, their best achievable combination becomes an essential question for the material characterization. In this work, we systematically investigate the NV center creation and properties in chemical vapor deposition (CVD) diamond. We have grown CVD diamond series with a varying nitrogen flow over four orders of magnitude, leading to a broad range of single substitutional nitrogen (P1 center) densities from 0.2 to 20 ppm. On these series, we study P1, NV creations and NV charge states after growth, as well as their transformation under subsequent electron beam irradiation. Furthermore, for a fixed nitrogen concentration, we optimize electron-irradiation fluences with two different accelerated electron energies. We discuss a general approach to determine the optimal irradiation conditions, for which an enhanced NV concentration and an optimum of NV charge states can both be satisfied. Moreover, through irradiation and annealing treatments, we monitor the change in T2 and aim to increase the NV density without compromising T2. We achieve NV concentrations from 1 to 168 ppb with T2 from 549 to 45.5 µs respectively. This study shows a pathway to engineer properties of NV-doped CVD diamonds for improved sensitivity.
Abstract Diamond hosts a wide variety of colour centres that have demonstrated outstanding optical and spin properties. Among them, the nitrogen-vacancy (NV) centre is by far the most investigated owing to its superior characteristics, which promise the development of highly sophisticated quantum devices, in particular for sensing applications. Nevertheless, harnessing the potential of these centres mainly relies on the availability of high quality and purity diamond single crystals that need to be specially designed and engineered for this purpose. Plasma assisted chemical vapour deposition (CVD) has become a key enabling technology in this field of research. Nitrogen can indeed be directly doped in situ into a high crystalline quality diamond matrix in a controlled way, allowing the production of single isolated centres or ensembles that can potentially be integrated into a device. In this paper we will provide an overview of the requirements for synthesizing ‘quantum-grade’ diamond films using CVD. These include the reduction of impurities and surrounding spins that limit coherence times, the control of NV density in a wide range of concentrations as well as their spatial localization within the diamond. Enhancing the charge state and preferential orientation of the colour centres is also discussed. These improvements in material fabrication have contributed to positioning diamond as one of the most promising solid-state quantum systems and the first industrial applications in sensing are just starting to emerge.
Defects in diamond have evolved as unique object for their potential application for Optical imaging and Nano-photonics. High pressure high temperature (HPHT) grown type-Ib diamond particles were milled down to the size of ~ 80 nm and purified to remove iron & graphitic carbon impurities and irradiated with 35 KeV He+ ions to create vacancies in the diamond lattice. Vacancies diffuse close to substitutional nitrogen impurities of nano-diamond particles upon thermal treatment. Characteristic sharp emission of NV centers were observed at 575.5 nm and 637.9 nm corresponding to NV° and NV− charged states in addition to a broad emission in the range 550-750 nm. Structural and photo-physical behavior of these fluorescent diamonds was found to depend on the method of purification adopted. Samples purified through acid reflux were found suitable for bio-imaging applications while, sample purified through air oxidation shows properties desirable for Nano-photonic applications. Photon-correlation measurements of emission from individual diamond nanoparticles using Hanbury Brown and Twiss interferometer (HBT) shows anti-bunching curve with g2(t)= 0 confirming their suitability as single photon source. Such sources of indistinguishable photons are highly desirable for quantum computation and quantum optics applications.
Single-photon sources are a fundamental element for developing quantum technologies, and sources based on colour centres in diamonds are among the most promising candidates. The well-known nitrogen vacancy centres are characterized by several limitations, and thus few other defects have recently been considered. In the present work, we characterize, in detail, native efficient single colour centres emitting in the near infra-red ( λ = 740–780 nm) in both standard IIa single-crystal and electronic-grade polycrystalline commercial chemical vapour deposited (CVD) diamond samples. In the former case, a high-temperature ( T > 1000 °C) annealing process in vacuum is necessary to induce the formation/activation of luminescent centres with good emission properties, while in the latter case the annealing process has marginally beneficial effects on the number and performance of native centres in commercially available samples. Although displaying significant variability in several photo-physical properties (emission wavelength, emission rate instabilities, saturation behaviours), these centres generally display appealing photophysical properties for applications as single photon sources: short lifetimes (0.7–3 ns), high emission rates (∼50–500 × 10 3 photons s −1 ) and strongly (>95%) polarized light. The native centres are tentatively attributed to impurities incorporated in the diamond crystal during the CVD growth of high-quality type-IIa samples, and offer promising perspectives in diamond-based photonics.