I derive ultimate lower bound on the precision of polarization estimation for classical coherent light. I show that it is attainable with conventional detection schemes and discuss role of the global phase in this problem.
We present a comprehensive and pedagogical formulation of Bayesian multiparameter quantum estimation. Within this framework, we analyse the role of measurement incompatibility and establish its quantitative effect on attainable precision. We achieve this by deriving upper bounds based on the pretty good measurement -- a notion from hypothesis testing -- combined with the evaluation of the Nagaoka-Hayashi lower bound. In general, we prove that, as in the many-copy regime of local estimation theory, incompatibility can at most double the minimum loss relative to the idealised scenario in which individually optimal measurements are assumed jointly implementable. Therefore, in practical situations, the latter may provide a sufficient and computationally efficient benchmark without solving the full optimisation problem. Our results, which we illustrate through applications of discrete phase imaging, phase and dephasing estimation, and qubit sensing, provide analytical and numerical tools for assessing ultimate precision limits and the role of measurement incompatibility in Bayesian multiparameter quantum metrology, including an open-source package for all the bounds discussed here.
Quantum phase measurement with multiphoton twin-Fock states has been shown to be optimal for detecting equal numbers of photons at the output ports of a Mach–Zehnder interferometer (i.e., the so-called single-fringe detection), since the phase sensitivity can saturate the quantum Cramér–Rao lower bound at certain values of phase shift. Here we report a further step to achieve a global phase estimation at the Heisenberg limit by detecting the particle-number difference (i.e., the J ^ z measurement). We show the role of experimental imperfections on the ultimate estimation precision with the six-photon twin-Fock state of light. Our results show that both the precision and the sensing region of the J ^ z measurement are better than those of the single-fringe detection, due to combined contributions of the measurement outcomes. We numerically simulate the phase estimation protocol using an asymptotically unbiased maximum likelihood estimator.
Multiparameter quantum metrology plays a fundamental role in uncovering and exploiting the distinctive features of quantum systems. In this work, we propose an effective and experimentally feasible scheme to significantly enhance the simultaneous quantum estimation of the photon magnon and magnon mechanical coupling strengths in a hybrid cavity magnon mechanical platform. Our approach relies on the assistance of a coherent feedback loop combined with the injection of a coherent driving field. We show that an appropriate tuning of the system and feedback parameters leads to a substantial reduction of the estimation errors associated with both coupling strengths. To quantify the metrological performance of the proposed scheme, we employ the quantum Cramer Rao bound (QCRB) as a fundamental benchmark for multiparameter estimation. We explicitly compute and compare the QCRBs derived from the symmetric logarithmic derivative (SLD) and the right logarithmic derivative (RLD) formalisms. Our results demonstrate that the RLD based QCRB is systematically lower than the SLD based bound, indicating superior estimation precision in the considered noncommutative estimation scenario. We further analyze the performance of heterodyne detection and show that, in suitable parameter regimes, the corresponding classical estimation precision closely approaches the ultimate quantum limit predicted by our scheme. Finally, we discuss the experimental feasibility of the proposed setup within currently available cavity magnon mechanical platforms. Owing to its general character, the framework developed here can be readily extended to the high precision estimation of other physical parameters in hybrid quantum systems.
According to the Heisenberg uncertainty principle, the precision of any physical quantity measurement is limited by quantum fluctuation in general, which leads to the so-called standard quantum limit (SQL). The SQL can be beaten by using squeezed light, hence enhancing the measurement accuracy. Squeezed light is a typical nonclassical light, it exhibits reduced noise in one quadrature component. Since Caves proposed the scheme of phase measurement enhancement with squeezing, squeezed light has been used to enhance measurement precision in many areas. This review focuses on the following four kinds of precision measurements based on squeezed light: the measurements of relative phase, small lateral displacement and tilt, magnetic field, and clock synchronization. For all of these measurements, vacuum squeezing has been used to enhance measurement precision, while the types of squeezing (squeezing angle, transverse mode, polarization etc.) are different. For phase measurement, quadrature squeezing is injected into the conventionally unused input port of Mach-Zehnder interferometer (MZI) or Michelson interferometer (MI). For displacement or tilt measurement, a vacuum squeezing beam of a special transverse mode is coupled into an intense coherent beam, yielding a spatial-squeezed light whose transverse position or tilt angle noise is lower than that of a classical light beam. Based on the Faraday effect of polarization rotation, the magnetic field can be detected precisely. The precision can be increased further by using the polarization squeezing. The polarization squeezing can be generated by coupling two orthogonal polarized beams together, a coherent beam and a vacuum squeezed beam. Various polarization squeezing can be illustrated on the Poincaré sphere. Finally, in the clock synchronization based on the optical frequency comb, squeezed light can be used to enhance the time measurement precision. A theoretical scheme with multimode squeezing of supermode (a kind of mode describing the frequency mode of a pulse laser beam) is introduced. The squeezing has extensively been applied into the quantum precision measurements such as gravitational wave detection as well as biological measurement and will play a more important role in the near future.