Recent atom interferometry (AI) experiments involving Bose–Einstein condensates (BECs) have been conducted under extreme conditions of volume and interrogation time. Numerical solution of the rotating-frame Gross–Pitaevskii equation (RFGPE), which is the standard mean-field theory applied to these experiments, is impractical due to the excessive computation time and memory required. We present a variational model that provides approximate solutions of the RFGPE for a power-law potential on a practical time scale. This model is well-suited to the design and analysis of AI experiments involving BECs that are split and later recombined to form an interference pattern. We derive the equations of motion of the variational parameters for this model and illustrate how the model can be applied to the sequence of steps in a recent AI experiment where BECs were used to implement a dual-Sagnac atom interferometer rotation sensor. We use this model to investigate the impact of finite-size and interaction effects on the single-Sagnac-interferometer phase shift.
Recent atom interferometry (AI) experiments involving Bose–Einstein condensates (BECs) have been conducted under extreme conditions of volume and interrogation time. Numerical solution of the rotating-frame Gross–Pitaevskii equation (RFGPE), which is the standard mean-field theory applied to these experiments, is impractical due to the excessive computation time and memory required. We present a variational model that provides approximate solutions of the RFGPE for a power-law potential on a practical time scale. This model is well-suited to the design and analysis of AI experiments involving BECs that are split and later recombined to form an interference pattern. We derive the equations of motion of the variational parameters for this model and illustrate how the model can be applied to the sequence of steps in a recent AI experiment where BECs were used to implement a dual-Sagnac atom interferometer rotation sensor. We use this model to investigate the impact of finite-size and interaction effects on the single-Sagnac-interferometer phase shift.
We present theoretical tools for predicting and reducing the effects of atomic interactions in Bose-Einstein condensate (BEC) interferometry experiments. To address mean-field shifts during free propagation, we derive a robust scaling solution that reduces the three-dimensional Gross-Pitaevskii equation to a set of three simple differential equations valid for any interaction strength. To model the other common components of a BEC interferometer---condensate splitting, manipulation, and recombination---we generalize the slowly varying envelope reduction, providing both analytic handles and dramatically improved simulations. Applying these tools to a BEC interferometer to measure the fine structure constant, $\ensuremath{\alpha}$ [S. Gupta, K. Dieckmann, Z. Hadzibabic, and D. E. Pritchard, Phys. Rev. Lett. 89, 140401 (2002)], we find agreement with the results of the original experiment and demonstrate that atomic interactions do not preclude measurement to better than part-per-billion accuracy, even for atomic species with relatively large scattering lengths. These tools help make BEC interferometry a viable choice for a broad class of precision measurements.
In this dissertation, I model the effects of inertial forces on the dynamics of weaklyinteracting dilute atomic gas Bose-Einstein condensates (BECs) in rotating frames of reference through the use of numerical simulations. The dynamics of BECs are modeled here in the mean-field limit of the time-dependent Gross-Pitaevskii equation (GPE). When the GPE is considered in a rotating frame of reference, the inertial forces acting on a BEC manifest themselves as an effective coupling between the angular momentum of the condensate itself and the angular velocity vector that defines the rotational motion of the reference frame. Using a method-of-lines implementation of a generalized 4th-order Runge-Kutta method with finite differences to numerically approximate solutions of the GPE, I study how this effective coupling of the inertial forces to the condensate arise in practice by simulating the dynamics of BECs in three quantum-mechanical analogues of classical rotating systems. These systems are (1) a Foucault pendulum-like harmonic oscillator, (2) a mechanical gyroscope, and (3) a Compton generator. When possible, the observed dynamics of the condensates are compared via the Ehrenfest theorem to the dynamics predicted for the corresponding classical system. In general, I find that the observed dynamics for each of these systems agrees quite well with their classical counterparts. However, in a few cases, there appears to be some unaccounted for internal dynamics of the BECs that is not well-explained by the classical equations of motion. But further study will be required to elucidate the source of these possible discrepancies. \nIn addition to simulating the quantum analogues of these classical rotating systems, I also extend some of my earlier work on the interference of matter waves in a Sagnac interferometer. In particular, I extend this work to consider how the observed Sagnac phase shift accumulates in time when the wave packets propagate within an ???off-axis??? ring potential that orbits the centre of rotation in the system. Here, once again, I find that the accumulation of the Sagnac phase shift may occur in discrete phase jumps under certain conditions. This unexpected behavior in the time-dependence of the Sagnac phase shift is ascribed to the initial angular momentum the wave packets acquire starting at rest with respect to the interferometer???s uniformly rotating ring potential, which prevents the center of mass between the wave packets from drifting linearly about the ring.
This work presents a numerical study of a tunnelingbased interferometer implemented using a Bose-Einstein condensate (BEC) confined in a static double-well potential, where the condensate dynamics are simulated using the one-dimensional Gross-Pitaevskii equation to capture the essential mean-field behavior. By carefully configuring the central barrier parameters, the double well is engineered to act as a coherent matterwave beam splitter. A relative phase is introduced between the two arms of the interferometer, enabling the extraction of phase information through interference. We analyze the resulting interference contrast to determine the best barrier configurations that allow the system to function effectively as an interferometer. It was found that the interferometric contrast remains robust under realistic fluctuations in the barrier parameters, confirming experimental feasibility. Using a fixed barrier for both the splitting and recombination steps, we avoid the need to dynamically ramp the barrier, as in other approaches. This allows us to realize a simple and experimentally accessible interferometry scheme in the double-well potential.
We present a method for rapid modeling of new Bragg ultracold atom-interferometer (AI) designs useful for assessing the performance of such interferometers. The method simulates the overall effect on the condensate wave function in a given AI design using two separate elements. These are (1) modeling the effect of a Bragg pulse on the wave function and (2) approximating the evolution of the wave function during the intervals between the pulses. The actual sequence of these pulses and intervals is then followed to determine the approximate final wave function from which the interference pattern can be calculated. The exact evolution between pulses is assumed to be governed by the Gross-Pitaevskii (GP) equation whose solution is approximated using a Lagrangian variational method to facilitate rapid estimation of performance. The method presented here is an extension of an earlier one that was used to analyze the results of an experiment [J. E. Simsarian et al., Phys. Rev. Lett. 85, 2040 (2000)], where the phase of a Bose-Einstein condensate was measured using a Mach-Zehnder-type Bragg AI. We have developed both 1D and 3D versions of this method and we have determined their validity by comparing their predicted interference patterns with those obtained by numerical integration of the 1D GP equation and with the results of the above experiment. We find excellent agreement between the 1D interference patterns predicted by this method and those found by the GP equation. We show that we can reproduce all of the results of that experiment without recourse to an ad hoc velocity-kick correction needed by the earlier method, including some experimental results that the earlier model did not predict. We also found that this method provides estimates of 1D interference patterns at least four orders-of-magnitude faster than direct numerical solution of the 1D GP equation.
This chapter describes the Bose--Einstein condensate (BEC) interferometry. We first introduce the optical interferometer, briefly discussing the role of fringe contrast in observing interference patterns. Next, we examine a BEC interferometer in a Michelson geometry that consists of a BEC in a trapping potential well. The BEC cloud in the potential well is put into a linear superposition of two clouds that travel along different paths in the trap and are recombined using the same light beams. By studying the population of atoms in the different motional states of the BEC clouds that emerge after recombination, we obtain information about the relative phase shift accumulated by the two traveling superposed condensates during the interferometry. We then characterize the atom distribution that is found in the output of the interferometer by finding the probability density distribution and calculating the features of the probability density such as the mean, the variance, and the interference fringe contrast. Finally, we parameterize the effect of two-body collisional interactions on the observed interference fringes in a way that can be directly controlled in an experiment.
Abstract Atom interferometers using Bose–Einstein condensates are fundamentally limited by a phase diffusion process that arises from atomic interactions. Numerical solution of the Gross–Pitaevskii equation is here used to accurately calculate the diffusion rate for a Bragg interferometer. It is seen to agree with a Thomas–Fermi approximation at large atom numbers and a perturbative approximation at low atom numbers. Most experiments to date operate in the crossover region between these two regimes. Even in this case, it is found that that the diffusion time is governed in a simple way by the ratio of the healing length to the size of the condensate.