Monolithic Integration of Quantum Resonant Tunneling Gate on a 22nm FD-SOI CMOS Process
Bashir, Imran, Dirk R. Leipold, Elena Blokhina, Mike Asker, Redmond, David, Ali Esmailiyan, Panagiotis Giounanlis, Haenlein, Hans, Xuton Wu, Andrii Sokolov, Dennis Andrade‐Miceli, Andrew K. Mitchell, Robert Bogdan Staszewski
The proliferation of quantum computing technologies has fueled the race to build a practical quantum computer. The spectrum of the innovation is wide and encompasses many aspects of this technology, such as the qubit, control and detection mechanism, cryogenic electronics, and system integration. A few of those emerging technologies are poised for successful monolithic integration of cryogenic electronics with the quantum structure where the qubits reside. In this work, we present a fully integrated Quantum Processor Unit in which the quantum core is co-located with control and detection circuits on the same die in a commercial 22-nm FD-SOI process from GlobalFoundries. The system described in this work comprises a two dimensional (2D) 240 qubits array integrated with 8 detectors and 32 injectors operating at 3K and inside a two-stage Gifford-McMahon cryo-cooler. The power consumption of each detector and injector is 1mW and 0.27mW, respectively. The control sequence is programmed into an on-chip pattern generator that acts as a command and control block for all hardware in the Quantum Processor Unit. Using the aforementioned apparatus, we performed a quantum resonant tunneling experiment on two qubits inside the 2D qubit array. With supporting lab measurements, we demonstrate the feasibility of the proposed architecture in scaling-up the existing quantum core to thousands of qubits.
The proliferation of quantum computing technologies has fueled the race to build a practical quantum computer. The spectrum of the innovation is wide and encompasses many aspects of this technology, such as the qubit, control and detection mechanism, cryogenic electronics, and system integration. A few of those emerging technologies are poised for successful monolithic integration of cryogenic electronics with the quantum structure where the qubits reside. In this work, we present a fully integrated Quantum Processor Unit in which the quantum core is co-located with control and detection circuits on the same die in a commercial 22-nm FD-SOI process from GlobalFoundries. The system described in this work comprises a two dimensional (2D) 240 qubits array integrated with 8 detectors and 32 injectors operating at 3K and inside a two-stage Gifford-McMahon cryo-cooler. The power consumption of each detector and injector is 1mW and 0.27mW, respectively. The control sequence is programmed into an on-chip pattern generator that acts as a command and control block for all hardware in the Quantum Processor Unit. Using the aforementioned apparatus, we performed a quantum resonant tunneling experiment on two qubits inside the 2D qubit array. With supporting lab measurements, we demonstrate the feasibility of the proposed architecture in scaling-up the existing quantum core to thousands of qubits.
This paper discloses a mixed-signal control unit of a fully integrated semiconductor quantum processor SoC realized in a 22nm FD-SOI technology. Independent high-resolution DACs that set the amplitude and pulse-width of the control signals were integrated for each qubit, enabling both a programmable semiconductor qubit operation and a per-qubit individual calibration that compensates for the process variability. The lower deco-herence time of the semiconductor charge-qubits as compared to their spin-qubit counterparts was mitigated by using a high frequency of control unit operation. This is facilitated by the co-integration on the same die of the semiconductor quantum structures together with their corresponding classic control circuitry. The main challenge of achieving deep cryogenic operation for the mixed-signal classic control circuit was surpassed by using programmable local heating DACs that slightly boost the local temperature of the control blocks above the average temperature of the die, which needs to be maintained around 4 K to enable a reliable quantum operation. A staged multi-phase operation was adopted for the digital core in order to minimize the quantum decoherence originated in digital noise injection. The high-frequency clock tree and divider allows the generation of sub-20 ps fast edge control pulses with programmable widths down to 166 ps. This offers a wide quantum computation window when compared with the 1µs decoherence time of the charge-qubit structures.
Quantum computing promises to revolutionize our lives, achieving unprecedented computational powers and unlocking new possibilities in drug discovery, chemical simulations and cryptography. The fundamental unit of computation of a quantum computer is the quantum bit (qubit). It can be implemented in a number of technologies, such as superconducting qubits, spin qubits, photonic systems, trapped ions and NV-centers. Solid-state superconducting qubits and spin qubits seem to be the most promising ones, as shown by the recent demonstration of quantum supremacy with a superconducting qubit processor. Such quantum processors, to operate in the quantum regime, require very low temperatures around 10 mK, and they are hence kept inside dilution fridges. The electronics required to read out and control such processors is typically realized by discrete components or bulky scientific instruments at room temperature wired into the dilution fridge. Such approach is only feasible until few (< 100) qubits are handled, but it is not scalable for million-qubit processors required for fault-tolerant operation. In this thesis, readout and control electronics is proposed to be integrated and operated directly at cryogenic temperatures, in close proximity with the qubits and potentially even co-integrated. CMOS technology is advocated for its scalability, compactness and low prototyping cost, to create a comprehensive cryo-CMOS class of fully-integrated transceivers to read out and control solid-state qubits. In particular, the thesis focuses on cryo-CMOS radio-frequency integrated circuits for the readout of silicon quantum computers, looking to integrate the whole readout system, from the quantum layer to the room temperature user interface. Cryogenic CMOS devices are explored first, to lay the foundations of integrated circuit design. The realization of quantum dots in standard CMOS technology is explored as a platform to realize solid-state qubit arrays, demonstrating functionality at 50 mK and good reproducibility. Moreover, the operation of integrated transistors at 50 mK and 4.2 K is explored to understand their basic cryogenic functionality, through characterization and modeling. Then also integrated passives, such as capacitors, inductors and transformers, are studied and modeled at cryogenic temperatures. Then, a fully-integrated readout platform spanning across all the blocks needed for dispersive readout is proposed. A fully-integrated matrix of quantum dots with radio-frequency gate-based readout capabilities is demonstrated along with time- and frequency-multiplexing. This quantum-classical circuit shows all the features for a scalable approach and is the core of the platform following it. A cryogenic CMOS circulator based on a new all-pass filter architecture is demonstrated, to be used as integrated replacement for current bulky counterparts; it allows power reduction, insertion loss and bandwidth enhancement with respect to state-of-the-art integrated circulators. The rest of the front-end is also explored with dedicated test multiplexers, a low noise-amplifier and an oscillator, that are finally merged in a single fully-integrated low-noise receiver with frequency synthesizer operating at 3.5 K for scalable multiplexed readout of silicon qubits. The platform presented in this thesis, across temperature boundaries, carries all the features required for future scalable silicon quantum computing platforms and could therefore form their core.
Quantum computers1 could revolutionize computing in a profound way due to the massive speedup they promise. A quantum computer comprises a cryogenic quantum processor and a classical electronic controller. When scaling up the cryogenic quantum processor to at least a few thousands, and possibly millions, of qubits required for any practical quantum algorithm, cryogenic CMOS (cryo-CMOS) electronics is required to allow feasible and compact interconnections between the controller and the quantum processor. Cryo-CMOS leverages the CMOS fabrication infrastructure while exploiting the continuous improvement of performance and miniaturization guaranteed by Moore's law, in order to enable the fabrication of a cost-effective practical quantum computer. However, designing cryo-CMOS integrated circuits requires a new set of CMOS device models, their embedding in design and verification tools, and the possibility to co-simulate the cryo-CMOS/quantum-processor architecture for full-system optimization. In this paper, we address these challenges by focusing on their impact on the design of complex cryo-CMOS systems.
While large-scale fault-tolerant quantum computers promise to enable the solution to certain classes of problems for which no other efficient approach is known, such a machine is believed to require over a million performant qubits. Scaling today's 0(100) qubit superconducting (SC) quantum computers to this extent while also improving performance carries many daunting challenges, including control of such a large quantum processor (QP). Integrating the control electronics at an intermediate temperature stage within the cryostat is an attractive option, e.g., due to the inherent thermal stability of the cryogenic environment and the feasibility of connecting to the QP via dense low-loss/high-thermal-isolation SC lines [1], [2]. Several cryo-CMOS quantum controllers have been reported, with examples used to control spin [3] and transmon [1], [2] qubits. To date, IC-based quantum control experiments have focused on resonant RF control, but baseband signals are often central to the execution of gates. Here, we report the design and system characterization of a cryo-CMOS IC for generating both the RF and baseband signals required for full control of a SC QP unit-cell, and show its ability to implement the components of a high-fidelity gate set that is universal for quantum computing.
A universal fault-tolerant quantum computer will require large-scale control systems that can realize all the waveforms required to implement a gateset that is universal for quantum computing. Optimization of such a system, which must be precise and extensible, is an open research challenge. Here, we present a cryogenic quantum control integrated circuit (IC) that is able to control all the necessary degrees of freedom of a two-qubit subcircuit of a superconducting quantum processor. Specifically, the IC contains a pair of 4–8-GHz RF pulse generators forXYcontrol, three baseband current generators for qubit and coupler frequency control, and a digital controller that includes a sequencer for gate sequence playback. After motivating the architecture, we describe the circuit-level implementation details and present experimental results. Using standard benchmarking techniques, we show that the cryogenic CMOS (cryo-CMOS) IC is able to execute the components of a gateset that is universal for quantum computing while achieving single-qubitXYandZaverage gate error rates of 0.17%–0.36% and 0.14%–0.17%, respectively, as well as two-qubit average cross-entropy benchmarking (XEB) cycle error rates of 1.2%. These error rates, which were achieved while dissipating just 4 mW/qubit, are comparable to the measured error rates obtained using baseline room-temperature electronics.
This work presents a collection of circuits to promote the development of a large-scale monolithicintegrated quantum processor in 22 nm FDSOI CMOS technology. These circuits are: a feedback circuit for automatically biasing CMOS inverter-based circuits, an LC resonator for qubit readout reflectometry and a digitally-controlled oscillator (DCO) for generating qubit spin manipulation pulses. The auto-biasing feedback circuit exploits the backgate terminal in FDSOI transistors to optimally bias CMOS inverter-based circuits at cryogenic temperatures. The LC resonator uses a sub-minimum-sized transistor with 50 nm width to demonstrate the detection of capacitance changes as small as 20 aF in a reflectometry experiment, which is analogous to the detection of a quantum state measurement. The DCO uses the same 50 nm device to achieve a fine-grained frequency resolution of 1.77 MHz, which allows the oscillator to tune into the Larmor frequencies of a group of qubits. Altogether, these circuits can be used in the development of a new quantum computing architecture which places the qubit arrays together with their accompanying electronics.