Abstract In hybrid circuit quantum electrodynamics (QED) architectures containing both ancilla qubits and bosonic modes, a controlled beam splitter (cBS) gate is a powerful resource. It can be used to create (up to a controlled-parity operation) an ancilla-controlled SWAP gate acting on two bosonic modes. This is the essential element required to execute the ‘swap test’ for purity, prepare quantum non-Gaussian entanglement and directly measure nonlinear functionals of quantum states. It also constitutes an important gate for hybrid discrete/continuous-variable quantum computation. We propose a new realization of a hybrid cSWAP utilizing ‘Kerr-cat’ qubits—anharmonic oscillators subject to strong two-photon driving. The Kerr-cat is used to generate a controlled-phase beam splitter operation. When combined with an ordinary beam splitter one obtains a cBS and from this a cSWAP. The strongly biased error channel for the Kerr-cat has phase flips which dominate over bit flips. This yields important benefits for the cSWAP gate which becomes non-destructive and transparent to the dominate error. Our proposal is straightforward to implement and, based on currently existing experimental parameters, should achieve cBS gates with high fidelities comparable to current ordinary beam-splitter operations available in circuit QED.
Abstract In hybrid circuit quantum electrodynamics (QED) architectures containing both ancilla qubits and bosonic modes, a controlled beam splitter (cBS) gate is a powerful resource. It can be used to create (up to a controlled-parity operation) an ancilla-controlled SWAP gate acting on two bosonic modes. This is the essential element required to execute the ‘swap test’ for purity, prepare quantum non-Gaussian entanglement and directly measure nonlinear functionals of quantum states. It also constitutes an important gate for hybrid discrete/continuous-variable quantum computation. We propose a new realization of a hybrid cSWAP utilizing ‘Kerr-cat’ qubits—anharmonic oscillators subject to strong two-photon driving. The Kerr-cat is used to generate a controlled-phase beam splitter operation. When combined with an ordinary beam splitter one obtains a cBS and from this a cSWAP. The strongly biased error channel for the Kerr-cat has phase flips which dominate over bit flips. This yields important benefits for the cSWAP gate which becomes non-destructive and transparent to the dominate error. Our proposal is straightforward to implement and, based on currently existing experimental parameters, should achieve cBS gates with high fidelities comparable to current ordinary beam-splitter operations available in circuit QED.
We introduce a hybrid qubit-boson beam-splitter gate in which a microwave cavity mode couples to an exchange-dressed two-level subsystem of an interacting two-qubit system in the presence of Kerr nonlinearity. Starting from a general circuit quantum electrodynamics (cQED) model, we derive the corresponding hybrid qubit-cavity interaction, develop its open-system description including photon- and qubit-sector-bath-induced dissipation and obtain in the weak-dissipation regime an analytical expression for the average gate fidelity. We further identify carbon-nanotube circuit QED as a concrete platform for implementing and controlling the gate, provide a representative operating regime and perform noiseless and noisy numerical simulations to study the gate dynamics and benchmark the analytical results. Beyond this implementation route, the proposed hybrid primitive provides a natural building block for many-body dynamics, including quantum-cellular-automaton (QCA) and lattice-gauge-inspired architectures and, through its collision-model reformulation, also suggests connections to noisy QCA, non-Markovian extensions and reservoir-style quantum information processing.
Bosonic quantum error correction has proven to be a successful approach for extending the coherence of quantum memories, but to execute deep quantum circuits, high-fidelity gates between encoded qubits are needed.To that end, we present a family of error-detectable two-qubit gates for a variety of bosonic encodings.From a new geometric framework based on a "Bloch sphere" of bosonic operators, we construct ZZ L (θ) and exponential-SWAP(θ) gates for the binomial, four-legged cat, dual-rail, and several other bosonic codes.The gate Hamiltonian is simple to engineer, requiring only a programmable beam splitter between two bosonic qubits and an ancilla dispersively coupled to one qubit.This Hamiltonian can be realized in circuit QED hardware with ancilla transmons and microwave cavities.The proposed theoretical framework was developed for circuit QED but is generalizable to any platform that can effectively generate this Hamiltonian.Crucially, one can also detect first-order errors in the ancilla and the bosonic qubits during the gates.We show that this allows one to reach error-detected gate fidelities at the 0.01% level with today's hardware, limited only by second-order hardware errors.
Fault-tolerant quantum computation with bosonic qubits often necessitates the use of noisy discrete-variable ancillae. In this work, we establish a comprehensive and practical fault-tolerance framework for such a hybrid system and synthesize it with fault-tolerant protocols by combining bosonic quantum error correction (QEC) and advanced quantum control techniques. We introduce essential building blocks of error-corrected gadgets by leveraging ancilla-assisted bosonic operations using a generalized variant of path-independent quantum control. Using these building blocks, we construct a universal set of error-corrected gadgets that tolerate a single-photon loss and an arbitrary ancilla fault for four-legged cat qubits. Notably, our construction requires only dispersive coupling between bosonic modes and ancillae, as well as beam-splitter coupling between bosonic modes, both of which have been experimentally demonstrated with strong strengths and high accuracy. Moreover, each error-corrected bosonic qubit is comprised of only a single bosonic mode and a three-level ancilla, featuring the hardware efficiency of bosonic QEC in the full fault-tolerant setting. We numerically demonstrate the feasibility of our schemes using current experimental parameters in the circuit-QED platform. Finally, we present a hardware-efficient architecture for fault-tolerant quantum computing by concatenating the four-legged cat qubits with an outer qubit code utilizing only beam-splitter couplings. Our estimates suggest that the overall noise threshold can be reached using existing hardware. These developed fault-tolerant schemes extend beyond their applicability to four-legged cat qubits and can be adapted for other rotation-symmetrical codes, offering a promising avenue toward scalable and robust quantum computation with bosonic qubits. Published by the American Physical Society 2024
Stabilized cat qubits that possess biased noise channel with bit-flip errors exponentially smaller than phase-flip errors. Together with a set of bias-preserving (BP) gates, cat qubits are a promising candidate for realizing hardware efficient quantum error correction and fault-tolerant quantum computing. Compared to dissipatively stabilized cat qubits, the Kerr cat qubits can in principle support faster gate operations with higher gate fidelity, benefiting from the large energy gap that protects the code space. However, the leakage of the Kerr cats can increase the minor type of errors and compromise the noise bias. Both the fast implementation of gates and the interaction with environment can lead to such detrimental leakage if no sophisticated controls are applied. In this work, we introduce new fine-control techniques to overcome the above obstacles for Kerr cat qubits. To suppress the gate leakage, we use the derivative-based transition suppression technique to design derivative-based controls for the Kerr BP gates. We show that the fine-controlled gates can simultaneously have high gate fidelity and high noise bias and when applied to concatenated quantum error correction, can not only improve the logical error rate but also reduce resource overhead. To suppress the environment-induced leakage, we introduce colored single-photon dissipation, which can continuously cool the Kerr cats and suppress the minor errors while not enhancing the major errors.
Hybrid qubits have recently drawn intense attention in quantum computing. We here propose a method to implement a universal controlled-phase gate of two hybrid qubits via two three-dimensional (3D) microwave cavities coupled to a superconducting flux qutrit. For the gate considered here, the control qubit is a microwave photonic qubit (particle-like qubit), whose two logic states are encoded by the vacuum state and the single-photon state of a cavity, while the target qubit is a cat-state qubit (wave-like qubit), whose two logic states are encoded by the two orthogonal cat states of the other cavity. During the gate operation, the qutrit remains in the ground state; therefore, decoherence from the qutrit is greatly suppressed. The gate realization is quite simple, because only a single basic operation is employed and neither classical pulse nor measurement is used. Our numerical simulations demonstrate that with current circuit quantum electrodynamics technology, this gate can be realized with a high fidelity. The generality of this proposal allows implementing the proposed gate in a wide range of physical systems, such as two 1D or 3D microwave or optical cavities coupled to a natural or artificial three-level atom. Finally, this proposal can be applied to create a novel entangled state between a particle-like photonic qubit and a wave-like cat-state qubit.
Bosonic quantum error correction represents a route towards significant hardware overhead reduction for fault-tolerant quantum computation. However, controlling quantum harmonic oscillators that encode the quantum information comes with its own challenges. In many platforms such as superconducting circuits and trapped ions, the bosonic degree of freedom is controlled by an ancillary qubit whose decay during a qubit-oscillator gate propagates to the oscillator as a continuous error. Such errors generally lie beyond the scope of errors that the bosonic code is capable of correcting. We introduce the continuous-variable flag: an auxiliary oscillator coupled to the ancilla whose phase-space position encodes the continuous error corrupting the storage mode. After the gate, a heterodyne measurement of the flag estimates this continuous-variable error and a subsequent feedback control undoes it up to a bosonic code stabilizer. The scheme requires no new ingredients, as the flag is driven by the same dispersive coupling, displacements and rotations that implement the gates it is supposed to protect. We construct sequences protecting conditional rotations to all orders in ancilla decay with one flag, and conditional displacements to first order with one flag and to all orders with two. Simulations with realistic circuit-QED parameters predict more than three orders of magnitude fewer logical errors for the parity measurement of a four-component cat code, and a finite-energy GKP logical lifetime near its noiseless-ancilla bound. By discretizing continuous-variable errors, the flags introduced in this work are a useful tool for any hybrid oscillator-qubit processor, and open the route towards fault-tolerant simulation and computation with bosonic modes.