Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2111.10019 · Physical Review A

Noise spectroscopy with a Rydberg ensemble in a hot atomic vapor cell

Jun He, Qiang Liu, Ze Yang, Qiqi Niu, Xiaojuan Ban, Junmin Wang

Published Dec 27, 2021• 19 citations
arXivHTMLPDF

Abstract

The phase noise of incident light fields can be converted into amplitude noise via absorption and dispersion effects in media under electromagnetically induced transparency. The conversion process is sensitive to two-photon detuning. This effect can be used to perform a different type of Rydberg spectroscopy. We present experimental measurements of the phase noise spectrum (PNS) with Rydberg atoms in a cesium vapor cell. Furthermore, to explore microwave field measurements, a modulation-enhanced PNS approach has been proposed and demonstrated.

DOI
10.1103/physreva.104.063120

Related papers

Microwave electric field measurement using frequency modulation spectroscopy in Rydberg atoms vapor cells

Santosh Kumar, Haoquan Fan, Akbar Jahangiri Jozani +2 more

We recently proposed a method to detect weak microwave electric field ~8µV/cm with sensitivity ~ 30 µV cm−1Hz−1/2 [Nat. Phys. 8, 819 (2012)]. This technique is based on Rydberg atoms using the concept of electromagnetically induced transparency in room temperature vapor cells. Here we show that frequency modulation spectroscopy with active control of residual amplitude modulation improves the read out signal-to-noise. The method has the potential for high sensitivity and can be self-calibrated.

International conference on fiber optics and photonics•Jan 1, 2016•0 citations

Sub-shot-noise Rydberg EIT spectrum

Hongmei Yan, Mingyong Jing, Yanjie Tong +8 more

Abstract Atom-based sensing with optical readout is fundamentally limited by photon shot noise. Squeezed light can effectively suppress this noise of optical readout, thereby enabling measurement sensitivities beyond the standard quantum limit, but their application in light–atom hybrid systems is often hindered by absorption losses of atomic medium. Here, we demonstrate the first realization of electromagnetically induced transparency spectrum in a Rydberg-atom system using a squeezed probe field that surpasses the photon shot noise limit. Our theoretical model identifies atomic transit and absorption-induced losses as the primary factors limiting squeezing preservation. Experimentally, we engineer the atomic ensemble as a medium with tunable transmittance by employing Doppler-matched velocity-selective excitation to suppress absorption, achieving a squeezing transmission of 90.4 $$\%$$ % for -1.7 dB squeezed light through a cesium vapor cell. This work is a critical step towards quantum-enhanced Rydberg atom sensors.

PhotoniX•Dec 15, 2025•8 citations

Electromagnetically induced transparency of Rydberg atoms in modulated laser fields

Yang Zhi-Wei, Jiao Yue-Chun, Xiaoxuan Han +2 more

Rydberg atoms, with large principal quantum number n, have been widely investigated in recent years due to their peculiar properties, such as big sizes, long lifetimes and strong interactions with fields and other Rydberg atoms. Rydberg atoms are very sensitive to external fields due to their large polarizabilities scaling as n7.These make Rydberg atoms an ideal candidate for the quantum information, the many-body interaction, etc.In this work, we investigate the Rydberg atoms using electromagneticlly induced transparency (EIT) in a ladder three-level system. The EIT is a quantum interference effect between two excitation path-ways driven by two laser fields. The main idea is performed in a room temperature cesium vapor cell, where the probe laser frequency is modulated. The ground state (6P1/2), excited state (6P3/2), and Rydberg state (nS1/2) constitute a Rydberg three-level system, in which the probe laser is fixed to the 6S1/2 (F = 4)6P3/2 (F = 5) transition by saturated absorption spectrum technique, whereas the coupling laser is scanned across the 6P3/249S1/2 transition. We detect the demodulated EIT signal with the lock-in amplifier (SR830). The modulated EIT signal shows a two-peak structure. The measured spacing between two peaks increases with the frequency detuning, caused by the modulation amplitude, and half the spacing between the peak-to-peak is nearly 1.67 times the modulation amplitude of the probe laser; the measured result shows that the splitting is independent of the modulation frequency. The experimental results are in agreement with the theoretical calculations. The results in our work can be used for real-time monitoring of the laser-line profiles and the fluctuation of laser frequency.

Acta Physica Sinica•Jan 1, 2016•2 citations

Electromagnetically induced transparency in modulated laser fields

Yuechun Jiao, Zhiwei Yang, Hao Zhang +4 more

Abstract We study electromagnetically induced transparency (EIT) in a room-temperature cesium vapor cell using wavelength-modulated probe laser light. In the utilized cascade level scheme, the probe laser drives the lower transition 6 S 1 / 2 ( F = 4) → 6 P 3 / 2 ( F ’ = 5), while the coupling laser drives the Rydberg transition 6 P 3 / 2 → 57 S 1 / 2 . The probe laser has a fixed average frequency and is modulated at a frequency of a few kHz, with a variable modulation amplitude in the range of tens of MHz. The probe transmission is measured as a function of the detuning of the coupling laser from the Rydberg resonance. The first-harmonic demodulated EIT signal has two peaks that are, in the case of large modulation amplitude, separated by the peak-to-peak modulation amplitude of the probe laser times a scaling factor λ p / λ c , where λ p and λ c are the probe- and coupling-laser wavelengths. The scaling factor is due to Doppler shifts in the EIT geometry. Second-harmonic demodulated EIT signals, obtained with small modulation amplitudes, yield spectral lines that are much narrower than corresponding lines in the modulation-free EIT spectra. The resultant spectroscopic resolution enhancement is conducive to improved measurements of radio-frequency (RF) fields based on Rydberg-atom EIT, an approach in which the response of Rydberg atoms to RF fields is exploited to characterize RF fields. Here, we employ wavelength modulation spectroscopy to reduce the uncertainty of atom-based frequency and field measurement of an RF field in the VHF radio band.

Journal of Physics B Atomic Molecular and Optical Physics•Dec 19, 2016•1 citation

Dispersive microwave electrometry using Zeeman frequency modulation spectroscopy of electromagnetically induced transparency in Rydberg atoms

Feng-Dong Jia, Yonghong Yu, Xiubin Liu +7 more

We herein developed and demonstrated a Zeeman frequency modulation scheme for improving the signal-to-noise ratio of microwave electric field measurement using Rydberg atoms. The spectra of the electromagnetically induced transparency (EIT) and Autler-Townes splitting of Rydberg atoms is frequency modulated by an alternating current magnetic field. The signal-to-noise ratio of the corresponding dispersive error signal is enhanced more than 10 times than that of the original spectrum. Furthermore, we show that the slope of the dispersive error signal near the resonance of the Rydberg EIT can be used to characterize the weak microwave electric field amplitudes. The more intuitive and simpler structure compared with other existing frequency modulation technologies greatly reduces the difficulties of experiments and experimental data analysis.

Applied Optics•Aug 25, 2020•22 citations

Microwave electromagnetically induced transparency and Aulter-Townes spectrum of cesium Rydberg atom

Fan Jia-Bei, Jiao Yue-Chun, Hao Li-Ping +3 more

We present an electromagnetically induced transparency and Aulter-Townes (EIT-AT) spectrum of a Rydberg three-level atom that is dressed with a microwave field in a room-temperature cesium cell. The EIT is a quantum coherent effect produced by the interaction of atoms with electromagnetic waves, which leads to the decrease of the absorption for a weak resonant probe laser. AT splitting refers to the phenomenon, that the absorption line splits when an electromagnetic field that is in resonance or near resonance acts on the transition of atoms. Rydberg atoms are extremely sensitive to an external electric field due to their large polarizabilities and microwave transition dipole moments, which can be used to measure the external field. In this work, a Rydberg three-level EIT is used to detect Rydberg atom and AT splitting induced by the microwave field. Cesium levels 6S1/2, 6P3/2 and 50S1/2 constitute a Rydberg three-level system, in which a weak probe laser locking to the transition from 6S1/2 to 6P3/2 couples ground-state transition and the strong coupling laser resonates on the Rydberg transition from 6P2/3 to 50S1/2. The two Rydberg levels 50S1/2 and 50P1/2 are coupled with the microwave field at a frequency of 30.852 GHz, leading to the AT splitting of EIT line and forming an EIT-AT spectrum, which is used to measure the electric field amplitude of microwave. In order to further study the EIT-AT splitting characteristics of the Rydberg levels, we carry out a series of measurements by changing the microwave field. The experimental results show a broadened EIT-AT signal for the weak field range and the four-peak spectrum for the strong field, which is attributed to the inhomogeneity of the microwave field. The microwave in cesium cell, emitted by a function generator, shows inhomogeneous behavior such that the atoms interacting with the laser field experience the different fields, leading to the line broadened and multi-peak EIT-AT spectra. For the microwave transition of nS1/2-nP1/2 in this paper, a pair of EIT-AT lines should be obtained for an electric field value. The broadening of the EIT-AT spectrum and the multi-peak structure here are due to the inhomogeneity of the microwave field measurement. We propose a method to increase the spatial resolution by reducing the length of cesium cell. The result in this work provides a method of measuring the field amplitude and monitoring the distribution of microwave electric field, meanwhile the spatial resolution of the measurements can be improved by reducing the size of the cell.

Acta Physica Sinica•Jan 1, 2018•14 citations
The phase noise of incident light fields can be converted into amplitude noise via absorption and dispersion effects in media under electromagnetically induced transparency. The conversion process is sensitive to two-photon detuning. This effect can be used to perform a different type of Rydberg spectroscopy. We present experimental measurements of the phase noise spectrum (PNS) with Rydberg atoms in a cesium vapor cell. Furthermore, to explore microwave field measurements, a modulation-enhanced PNS approach has been proposed and demonstrated.
We recently proposed a method to detect weak microwave electric field ~8µV/cm with sensitivity ~ 30 µV cm−1Hz−1/2 [Nat. Phys. 8, 819 (2012)]. This technique is based on Rydberg atoms using the concept of electromagnetically induced transparency in room temperature vapor cells. Here we show that frequency modulation spectroscopy with active control of residual amplitude modulation improves the read out signal-to-noise. The method has the potential for high sensitivity and can be self-calibrated.
Abstract Atom-based sensing with optical readout is fundamentally limited by photon shot noise. Squeezed light can effectively suppress this noise of optical readout, thereby enabling measurement sensitivities beyond the standard quantum limit, but their application in light–atom hybrid systems is often hindered by absorption losses of atomic medium. Here, we demonstrate the first realization of electromagnetically induced transparency spectrum in a Rydberg-atom system using a squeezed probe field that surpasses the photon shot noise limit. Our theoretical model identifies atomic transit and absorption-induced losses as the primary factors limiting squeezing preservation. Experimentally, we engineer the atomic ensemble as a medium with tunable transmittance by employing Doppler-matched velocity-selective excitation to suppress absorption, achieving a squeezing transmission of 90.4 %\%% % for -1.7 dB squeezed light through a cesium vapor cell. This work is a critical step towards quantum-enhanced Rydberg atom sensors.
Rydberg atoms, with large principal quantum number n, have been widely investigated in recent years due to their peculiar properties, such as big sizes, long lifetimes and strong interactions with fields and other Rydberg atoms. Rydberg atoms are very sensitive to external fields due to their large polarizabilities scaling as n7.These make Rydberg atoms an ideal candidate for the quantum information, the many-body interaction, etc.In this work, we investigate the Rydberg atoms using electromagneticlly induced transparency (EIT) in a ladder three-level system. The EIT is a quantum interference effect between two excitation path-ways driven by two laser fields. The main idea is performed in a room temperature cesium vapor cell, where the probe laser frequency is modulated. The ground state (6P1/2), excited state (6P3/2), and Rydberg state (nS1/2) constitute a Rydberg three-level system, in which the probe laser is fixed to the 6S1/2 (F = 4)6P3/2 (F = 5) transition by saturated absorption spectrum technique, whereas the coupling laser is scanned across the 6P3/249S1/2 transition. We detect the demodulated EIT signal with the lock-in amplifier (SR830). The modulated EIT signal shows a two-peak structure. The measured spacing between two peaks increases with the frequency detuning, caused by the modulation amplitude, and half the spacing between the peak-to-peak is nearly 1.67 times the modulation amplitude of the probe laser; the measured result shows that the splitting is independent of the modulation frequency. The experimental results are in agreement with the theoretical calculations. The results in our work can be used for real-time monitoring of the laser-line profiles and the fluctuation of laser frequency.
Abstract We study electromagnetically induced transparency (EIT) in a room-temperature cesium vapor cell using wavelength-modulated probe laser light. In the utilized cascade level scheme, the probe laser drives the lower transition 6 S 1 / 2 ( F = 4) → 6 P 3 / 2 ( F ’ = 5), while the coupling laser drives the Rydberg transition 6 P 3 / 2 → 57 S 1 / 2 . The probe laser has a fixed average frequency and is modulated at a frequency of a few kHz, with a variable modulation amplitude in the range of tens of MHz. The probe transmission is measured as a function of the detuning of the coupling laser from the Rydberg resonance. The first-harmonic demodulated EIT signal has two peaks that are, in the case of large modulation amplitude, separated by the peak-to-peak modulation amplitude of the probe laser times a scaling factor λ p / λ c , where λ p and λ c are the probe- and coupling-laser wavelengths. The scaling factor is due to Doppler shifts in the EIT geometry. Second-harmonic demodulated EIT signals, obtained with small modulation amplitudes, yield spectral lines that are much narrower than corresponding lines in the modulation-free EIT spectra. The resultant spectroscopic resolution enhancement is conducive to improved measurements of radio-frequency (RF) fields based on Rydberg-atom EIT, an approach in which the response of Rydberg atoms to RF fields is exploited to characterize RF fields. Here, we employ wavelength modulation spectroscopy to reduce the uncertainty of atom-based frequency and field measurement of an RF field in the VHF radio band.
We herein developed and demonstrated a Zeeman frequency modulation scheme for improving the signal-to-noise ratio of microwave electric field measurement using Rydberg atoms. The spectra of the electromagnetically induced transparency (EIT) and Autler-Townes splitting of Rydberg atoms is frequency modulated by an alternating current magnetic field. The signal-to-noise ratio of the corresponding dispersive error signal is enhanced more than 10 times than that of the original spectrum. Furthermore, we show that the slope of the dispersive error signal near the resonance of the Rydberg EIT can be used to characterize the weak microwave electric field amplitudes. The more intuitive and simpler structure compared with other existing frequency modulation technologies greatly reduces the difficulties of experiments and experimental data analysis.
We present an electromagnetically induced transparency and Aulter-Townes (EIT-AT) spectrum of a Rydberg three-level atom that is dressed with a microwave field in a room-temperature cesium cell. The EIT is a quantum coherent effect produced by the interaction of atoms with electromagnetic waves, which leads to the decrease of the absorption for a weak resonant probe laser. AT splitting refers to the phenomenon, that the absorption line splits when an electromagnetic field that is in resonance or near resonance acts on the transition of atoms. Rydberg atoms are extremely sensitive to an external electric field due to their large polarizabilities and microwave transition dipole moments, which can be used to measure the external field. In this work, a Rydberg three-level EIT is used to detect Rydberg atom and AT splitting induced by the microwave field. Cesium levels 6S1/2, 6P3/2 and 50S1/2 constitute a Rydberg three-level system, in which a weak probe laser locking to the transition from 6S1/2 to 6P3/2 couples ground-state transition and the strong coupling laser resonates on the Rydberg transition from 6P2/3 to 50S1/2. The two Rydberg levels 50S1/2 and 50P1/2 are coupled with the microwave field at a frequency of 30.852 GHz, leading to the AT splitting of EIT line and forming an EIT-AT spectrum, which is used to measure the electric field amplitude of microwave. In order to further study the EIT-AT splitting characteristics of the Rydberg levels, we carry out a series of measurements by changing the microwave field. The experimental results show a broadened EIT-AT signal for the weak field range and the four-peak spectrum for the strong field, which is attributed to the inhomogeneity of the microwave field. The microwave in cesium cell, emitted by a function generator, shows inhomogeneous behavior such that the atoms interacting with the laser field experience the different fields, leading to the line broadened and multi-peak EIT-AT spectra. For the microwave transition of nS1/2-nP1/2 in this paper, a pair of EIT-AT lines should be obtained for an electric field value. The broadening of the EIT-AT spectrum and the multi-peak structure here are due to the inhomogeneity of the microwave field measurement. We propose a method to increase the spatial resolution by reducing the length of cesium cell. The result in this work provides a method of measuring the field amplitude and monitoring the distribution of microwave electric field, meanwhile the spatial resolution of the measurements can be improved by reducing the size of the cell.