Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2111.05367 · Physical Review A

Spaceless description of active optical media

Giovanni Giacomelli, Serhiy Yanchuk, Antonio Politi

Published Nov 19, 2021• 2 citations
arXivHTMLPDF

Abstract

The acclaimed Maxwell-Bloch (or Arecchi-Bonifacio) equations are a valid dynamical model, effectively describing wave propagation in nonlinear optical media: from the amplification in input-output devices to multimode instabilities arising in laser systems. However, the inherent spatial variability of the physical observables represents an obstacle to fast simulations and analysis, especially whenever networks of active elements have to be considered. In this paper, we propose an approach which, stripping the spatial dependence of its role as a generator of dynamical richness, allows for a compelling simple portrait. It leads to (a few) ordinary differential equations in input-output configurations, complemented by a time-delayed feedback in closed-loop setups. Such a scheme reproduces accurately the dynamics, paving the way to a plain treatment of the wealth of phenomena described by the Maxwell-Bloch equations.

DOI
10.1103/physreva.104.053521

Related papers

The linear-stability analysis of the Maxwell–Bloch equations

Luigi Lugiato, Franco Prati, Massimo Brambilla

In this chapter we outline the general scenario for optical temporal instabilities, starting from the standard Maxwell–Bloch equations. With the exception of Section 22.7, in Part II we will always consider the ring-cavity configuration because only in the case of the ultrathin-medium case considered in Section 22.7 is the treatment of instabilities in Fabry–Perot cavities not substantially more complicated than that in the ring-cavity configuration. Some authors have introduced special approaches in order to study temporal optical instabilities, exploiting the concepts of gain and of dispersion, which are natural in optical systems and therefore help our intuition. In particular, a hint of the mechanism that produces instabilities in optical systems is offered by the so-called “weak-sideband” approach or “gain-feedback approach” [245–249], whose validity can be justified rigorously with the help of the linear-stability analysis [250]. The central point of this method is the response of the system to a weak probe passing through a collection of two-level atoms driven by a strong field [251–253]. If the strong signal with carrier frequency ω 0 saturates the medium, we can find regions of the frequency axis, which are far removed from the carrier frequency of the signal, where the weak probe can experience gain instead of absorption even if the medium has no population inversion. In this book we follow the approach of [250], which is rigorously rooted in the linear- stability analysis and, in addition, establishes a general, useful and, in a sense, surprising connection between single-mode and multimode instabilities. We classify as single-mode a temporal instability that involves the resonant mode only, and classify as multimode a temporal instability that involves only off-resonance cavity modes. The discussion in this chapter is mainly focussed on this connection. In Section 20.1 the multimodal equations derived in Section 12.2 are reformulated by introducing a modal expansion also for the atomic variables. In this way one obtains a complex hierarchy of equations that couple the modal amplitudes for the field and for the atomic variables.

Cambridge University Press eBooks•Feb 28, 2015•0 citations

Numerical Simulations of Laser Pulse Propagation in Quantum Active Media: Using a semiclassical model

Elliot Lu, Connor Glosser, Carlo Piermarocchi +1 more

Active media are materials that consist of quantum systems, such as atoms, impurities, or quantum dots, and are characterized by strong resonant absorption and re-emission of radiation. In this article, we present a general framework for the numerical simulation and analysis of time-dependent radiation-induced phenomena in active media. The formulation used is based on the solution of semiclassical Maxwell–Bloch equations describing the evolution of each quantum element under the effect of external and re-emitted radiation. Within these Maxwell–Bloch equations, the coupling of quantum systems to classical Maxwellian fields poses computational challenges due to the strong nonlinearities involved. In contrast to traditional mesh-based solvers, we adopt an electric field integral-operator approach that can reliably account for near-field effects—including self-radiation—and is scalable to large systems. We then focus on media based on large numbers of quantum dots and demonstrate various physical effects arising from the near-field coupling, including polarization modulations and superradiance.

IEEE Antennas and Propagation Magazine•May 12, 2021•1 citation

Modal equations for the ring cavity. The single-mode model

Luigi A. Lugiato, Franco Prati, Massimo Brambilla

In the previous chapters we considered the Maxwell–Bloch equations with the boundary condition appropriate for a unidirectional ring cavity and calculated the stationary solutions for laser and optical bistability, respectively. Next, we showed that the exact stationary solutions simplify appreciably in the low-transmission limit. In this chapter we want, first of all, to apply the low-transmission approximation on the dynamical equations directly, beyond the stationary case. We start from the Maxwell–Bloch equations (4.35)–(4.37) and the boundary condition (8.36). The latter is complex and includes the retardation Δ t and some parameters such as the transmissivity and reflectivity coefficients T and R , the input field y and the cavity detuning δ 0 . We introduce a transformation of the coordinates z and t and a transformation of the variables F and P [121–123]. As a result, the boundary condition reduces to a simple periodic boundary condition, and the electric-field equation incorporates the parameters which previously appeared in the boundary condition. The virtue of the periodic boundary condition is that it allows one to expand the electric field in terms of modal amplitudes and to recast the field equation in the form of a set of time-evolution equations for the modal amplitudes. All of this is shown in Section 12.1. In Section 12.2 we apply the low-transmission approximation and the Maxwell–Bloch equations assume a form that is a generalization of a set of equations commonly used in the literature to describe the ring laser [124]. Together with the Bloch equations for the atomic variables, the modal equations provide a model that lends itself ideally to a numerical resolution of the equations. In Section 12.3 we show that, if we assume that only the resonant cavity mode is active, this model reduces to a simple single-mode model consisting in three coupled ordinary differential equations, which will be analyzed in Part II of this book. Next, in the same section we derive the single-mode model in a more direct way, without passing through the multimodal equations.

Cambridge University Press eBooks•Feb 28, 2015•0 citations

Modeling of nonlinear Fabry-Perot resonators by difference-differential equations

Kensuke S. Ikeda, Masataka Mizuno

The aim of present paper is to propose several dynamical models of nonlinear Fabry-Perot resonators. The models are all described by sets of difference-differential (delay-differential) equations involving multiple time delays, and they are extended versions of the difference-differential equations proposed for the ring-type resonators by one of the present authors. We show in detail how these model equations are derived from the Maxwell-Bloch equations, assuming: 1) fast transversal relaxation, 2) weak nonlinearity, and 3) dispersive limit. We propose a hybrid optical bistable device as an analog system of a model equation.

IEEE Journal of Quantum Electronics•Sep 1, 1985•25 citations

Efficient modeling of optical coherent transient processors

Tiejun Chang, Ming Tian, William Randall Babbitt

Summary form only given. Fully coupled Maxwell-Bloch equations are required to adequately study the problem of coherent pulse propagation and stimulated photon echo processes, especially in optically thick media. The coupled Maxwell-Bloch equations for optical coherent transients (OCT) simulations have so far assumed a collinear configuration, where all the inputs and echoes propagate along the same direction. We present our own model.

Conference on Lasers and Electro-Optics•Jun 25, 2003•0 citations

Quantum photonics with active feedback loops

Melanie Engelkemeier, Lennart Lorz, Syamsundar De +5 more

We develop a unified theoretical framework for the efficient description of multiphoton states generated and propagating in loop-based optical networks which contain nonlinear elements. These active optical components are modeled as nonlinear media, resembling a two-mode squeezer. First, such nonlinear components can be seeded to manipulate quantum states of light, as such enabling photon addition protocols. And, second, they can function as an amplifying medium for quantum light. To prove the practical importance of our approach, the impact of multiple round trips is analyzed for states propagating in experimentally relevant loop configurations of networks, such as time-multiplexed driven quantum walks and iterative photon-number state generation protocols. Our method not only enables us to model such complex systems but also allows us to propose alternative setups that overcome previous limitations. To characterize the systems under study, we provide exact expressions for fidelities with target states, success probabilities of heralding-type measurements, and correlations between optical modes, including many realistic imperfections. Moreover, we provide an easily implementable numerical approach by devising a vector-type representation of photonic states, measurement operators, and passive and active processes.

arXiv:2002.08154•Physical Review A•Aug 20, 2020•13 citations
The acclaimed Maxwell-Bloch (or Arecchi-Bonifacio) equations are a valid dynamical model, effectively describing wave propagation in nonlinear optical media: from the amplification in input-output devices to multimode instabilities arising in laser systems. However, the inherent spatial variability of the physical observables represents an obstacle to fast simulations and analysis, especially whenever networks of active elements have to be considered. In this paper, we propose an approach which, stripping the spatial dependence of its role as a generator of dynamical richness, allows for a compelling simple portrait. It leads to (a few) ordinary differential equations in input-output configurations, complemented by a time-delayed feedback in closed-loop setups. Such a scheme reproduces accurately the dynamics, paving the way to a plain treatment of the wealth of phenomena described by the Maxwell-Bloch equations.
In this chapter we outline the general scenario for optical temporal instabilities, starting from the standard Maxwell–Bloch equations. With the exception of Section 22.7, in Part II we will always consider the ring-cavity configuration because only in the case of the ultrathin-medium case considered in Section 22.7 is the treatment of instabilities in Fabry–Perot cavities not substantially more complicated than that in the ring-cavity configuration. Some authors have introduced special approaches in order to study temporal optical instabilities, exploiting the concepts of gain and of dispersion, which are natural in optical systems and therefore help our intuition. In particular, a hint of the mechanism that produces instabilities in optical systems is offered by the so-called “weak-sideband” approach or “gain-feedback approach” [245–249], whose validity can be justified rigorously with the help of the linear-stability analysis [250]. The central point of this method is the response of the system to a weak probe passing through a collection of two-level atoms driven by a strong field [251–253]. If the strong signal with carrier frequency ω 0 saturates the medium, we can find regions of the frequency axis, which are far removed from the carrier frequency of the signal, where the weak probe can experience gain instead of absorption even if the medium has no population inversion. In this book we follow the approach of [250], which is rigorously rooted in the linear- stability analysis and, in addition, establishes a general, useful and, in a sense, surprising connection between single-mode and multimode instabilities. We classify as single-mode a temporal instability that involves the resonant mode only, and classify as multimode a temporal instability that involves only off-resonance cavity modes. The discussion in this chapter is mainly focussed on this connection. In Section 20.1 the multimodal equations derived in Section 12.2 are reformulated by introducing a modal expansion also for the atomic variables. In this way one obtains a complex hierarchy of equations that couple the modal amplitudes for the field and for the atomic variables.
Active media are materials that consist of quantum systems, such as atoms, impurities, or quantum dots, and are characterized by strong resonant absorption and re-emission of radiation. In this article, we present a general framework for the numerical simulation and analysis of time-dependent radiation-induced phenomena in active media. The formulation used is based on the solution of semiclassical Maxwell–Bloch equations describing the evolution of each quantum element under the effect of external and re-emitted radiation. Within these Maxwell–Bloch equations, the coupling of quantum systems to classical Maxwellian fields poses computational challenges due to the strong nonlinearities involved. In contrast to traditional mesh-based solvers, we adopt an electric field integral-operator approach that can reliably account for near-field effects—including self-radiation—and is scalable to large systems. We then focus on media based on large numbers of quantum dots and demonstrate various physical effects arising from the near-field coupling, including polarization modulations and superradiance.
In the previous chapters we considered the Maxwell–Bloch equations with the boundary condition appropriate for a unidirectional ring cavity and calculated the stationary solutions for laser and optical bistability, respectively. Next, we showed that the exact stationary solutions simplify appreciably in the low-transmission limit. In this chapter we want, first of all, to apply the low-transmission approximation on the dynamical equations directly, beyond the stationary case. We start from the Maxwell–Bloch equations (4.35)–(4.37) and the boundary condition (8.36). The latter is complex and includes the retardation Δ t and some parameters such as the transmissivity and reflectivity coefficients T and R , the input field y and the cavity detuning δ 0 . We introduce a transformation of the coordinates z and t and a transformation of the variables F and P [121–123]. As a result, the boundary condition reduces to a simple periodic boundary condition, and the electric-field equation incorporates the parameters which previously appeared in the boundary condition. The virtue of the periodic boundary condition is that it allows one to expand the electric field in terms of modal amplitudes and to recast the field equation in the form of a set of time-evolution equations for the modal amplitudes. All of this is shown in Section 12.1. In Section 12.2 we apply the low-transmission approximation and the Maxwell–Bloch equations assume a form that is a generalization of a set of equations commonly used in the literature to describe the ring laser [124]. Together with the Bloch equations for the atomic variables, the modal equations provide a model that lends itself ideally to a numerical resolution of the equations. In Section 12.3 we show that, if we assume that only the resonant cavity mode is active, this model reduces to a simple single-mode model consisting in three coupled ordinary differential equations, which will be analyzed in Part II of this book. Next, in the same section we derive the single-mode model in a more direct way, without passing through the multimodal equations.
The aim of present paper is to propose several dynamical models of nonlinear Fabry-Perot resonators. The models are all described by sets of difference-differential (delay-differential) equations involving multiple time delays, and they are extended versions of the difference-differential equations proposed for the ring-type resonators by one of the present authors. We show in detail how these model equations are derived from the Maxwell-Bloch equations, assuming: 1) fast transversal relaxation, 2) weak nonlinearity, and 3) dispersive limit. We propose a hybrid optical bistable device as an analog system of a model equation.
We develop a unified theoretical framework for the efficient description of multiphoton states generated and propagating in loop-based optical networks which contain nonlinear elements. These active optical components are modeled as nonlinear media, resembling a two-mode squeezer. First, such nonlinear components can be seeded to manipulate quantum states of light, as such enabling photon addition protocols. And, second, they can function as an amplifying medium for quantum light. To prove the practical importance of our approach, the impact of multiple round trips is analyzed for states propagating in experimentally relevant loop configurations of networks, such as time-multiplexed driven quantum walks and iterative photon-number state generation protocols. Our method not only enables us to model such complex systems but also allows us to propose alternative setups that overcome previous limitations. To characterize the systems under study, we provide exact expressions for fidelities with target states, success probabilities of heralding-type measurements, and correlations between optical modes, including many realistic imperfections. Moreover, we provide an easily implementable numerical approach by devising a vector-type representation of photonic states, measurement operators, and passive and active processes.