Experimental realization of an extended Fermi-Hubbard model using a 2D lattice of dopant-based quantum dots
Xiqiao Wang, Ehsan Khatami, Fan Fei, Jonathan Wyrick, Pradeep N. Namboodiri, Ranjit Vilas Kashid, Albert F. Rigosi, Garnett W. Bryant, Richard M. Silver
The Hubbard model is an essential tool for understanding many-body physics in condensed matter systems. Artificial lattices of dopants in silicon are a promising method for the analog quantum simulation of extended Fermi-Hubbard Hamiltonians in the strong interaction regime. However, complex atom-based device fabrication requirements have meant emulating a tunable two-dimensional Fermi-Hubbard Hamiltonian in silicon has not been achieved. Here, we fabricate 3 × 3 arrays of single/few-dopant quantum dots with finite disorder and demonstrate tuning of the electron ensemble using gates and probe the many-body states using quantum transport measurements. By controlling the lattice constants, we tune the hopping amplitude and long-range interactions and observe the finite-size analogue of a transition from metallic to Mott insulating behavior. We simulate thermally activated hopping and Hubbard band formation using increased temperatures. As atomically precise fabrication continues to improve, these results enable a new class of engineered artificial lattices to simulate interactive fermionic models.
The Hubbard model is an essential tool for understanding many-body physics in condensed matter systems. Artificial lattices of dopants in silicon are a promising method for the analog quantum simulation of extended Fermi-Hubbard Hamiltonians in the strong interaction regime. However, complex atom-based device fabrication requirements have meant emulating a tunable two-dimensional Fermi-Hubbard Hamiltonian in silicon has not been achieved. Here, we fabricate 3 × 3 arrays of single/few-dopant quantum dots with finite disorder and demonstrate tuning of the electron ensemble using gates and probe the many-body states using quantum transport measurements. By controlling the lattice constants, we tune the hopping amplitude and long-range interactions and observe the finite-size analogue of a transition from metallic to Mott insulating behavior. We simulate thermally activated hopping and Hubbard band formation using increased temperatures. As atomically precise fabrication continues to improve, these results enable a new class of engineered artificial lattices to simulate interactive fermionic models.
Abstract In pursuit of a practical quantum advantage 1 , analogue quantum systems provide an invaluable way to simulate the physics of quantum materials 2–4 , quantum systems out of equilibrium 5,6 or interaction-induced localization 7 . Notable recent progress to realize such systems has been achieved in ultracold atoms 8–12 , superconducting circuits 13–15 and twisted van der Waals materials 16–19 . However, so far, these platforms have struggled to simulate large-scale strongly interacting fermionic systems at low temperatures, at which electronic correlations dominate materials properties and numerical simulations remain restricted in accuracy and scope 20,21 . Here we demonstrate the realization of a new platform consisting of large-scale 2D arrays of sub-nanometre precision-engineered atom-based quantum dots (15,000 sites) to simulate strongly interacting, low-temperature physics. By observing a metal–insulator (MI) transition on a 2D square lattice of atom-based quantum dots, we demonstrate independent and precise control of the on-site interaction U and tunnelling t . Magneto-transport measurements further indicate the formation of an insulating state driven by Mott–Hubbard/Anderson physics and promising signatures of correlated electron physics. These precision-engineered analogue quantum simulators provide a unique platform to simulate quantum materials on arbitrary 2D lattices and to explore many unanswered questions in the formation of quantum magnetism, interacting topological quantum matter and unconventional superconductivity.
Strongly interacting electron systems can provide insight into quantum many-body phenomena, such as Mott insulating behavior and spin liquidity, facilitating semiconductor optimization. The Fermi-Hubbard model is the prototypical model used to study such systems. Recent research, however, has shown that the extended Fermi-Hubbard model, which accounts for long-range interactions, is more accurate, especially for systems far from half-filling. In this study, we use the extended Fermi-Hubbard model to mathematically analyze charge transport through a lattice of quantum dots. One-dimensional chains with spinless electrons and source-drain bias are observed, focusing on the transition between the ground state and the first excited state. Level repulsion decreases the expected energy levels of anticrossings as the hopping onto the chain tends to the hopping within the chain. The distribution of charge density along the chain is characterized in terms of the hopping, nuclear, and Coulomb parameters and novel plasmonic behavior is analyzed. Minor perturbations in electron transport are identified, corresponding to the one-dimensional nature of the observed systems. This research will lead to a better understanding of electron behavior in silicon-doped semiconductors, like the formation of correlation-induced band gaps, and open the door to using the extended Fermi-Hubbard model as a more accurate alternative to study quantum many-body systems.
Abstract The challenge of simulating many-body models with analogue physical systems requires both experimental precision and very low operational temperatures. Atomically precise placement of dopants in Si permits the construction of nanowires by design. We investigate the suitability of these interacting electron systems as simulators of a fermionic extended Hubbard model on demand. We describe the single-particle wavefunctions as a linear combination of dopant orbitals (LCDO). The electronic states are calculated within configuration interaction (CI). Due to the peculiar oscillatory behavior of each basis orbital, properties of these chains are strongly affected by the interdonor distance R0, in a non-monotonic way. Ground state (T = 0 K) properties such as charge and spin correlations are shown to remain robust under temperatures up to 4 K for specific values of R0. The robustness of the model against disorder is also tested, allowing some fluctuation of the placement site around the target position. We suggest that finite donor chains in Si may serve as an analog simulator for strongly correlated model Hamiltonians. This simulator is, in many ways, complementary to those based on cold atoms in optical lattices—the trade-off between the tunability achievable in the latter and the survival of correlation at higher operation temperatures for the former suggests that both technologies are applicable for different regimes.
In quantum simulation, many-body phenomena are probed in controllable quantum systems. Recently, simulation of Bose-Hubbard Hamiltonians using cold atoms revealed previously hidden local correlations. However, fermionic many-body Hubbard phenomena such as unconventional superconductivity and spin liquids are more difficult to simulate using cold atoms. To date the required single-site measurements and cooling remain problematic, while only ensemble measurements have been achieved. Here we simulate a two-site Hubbard Hamiltonian at low effective temperatures with single-site resolution using subsurface dopants in silicon. We measure quasi-particle tunnelling maps of spin-resolved states with atomic resolution, finding interference processes from which the entanglement entropy and Hubbard interactions are quantified. Entanglement, determined by spin and orbital degrees of freedom, increases with increasing valence bond length. We find separation-tunable Hubbard interaction strengths that are suitable for simulating strongly correlated phenomena in larger arrays of dopants, establishing dopants as a platform for quantum simulation of the Hubbard model.
Interacting electrons on material lattices can build up strong quantum correlations, which in turn can lead to the emergence of a wide range of novel and potentially useful magnetic and electronic material properties. Our understanding of this physics, however, is severely limited by the exponential growth in complexity with system size, which leads all classical methods to fall fundamentally short. In this thesis, I show how artificial lattices of conduction band electrons in semiconductors, so-called quantum dot arrays, can be used to directly emulate and therefore elucidate such Fermi-Hubbard physics. To this end, I focus on two approaches. A top-down approach allows to scale easily, but lacks to ability to control or measure individual sites. A bottom-up approach on the other hand utilizes the small devices employed by the community for qubit experiments, in which the control of individual sites is both a blessing and a curse. We address the issue of control to the point where mapping to relevant models is possible and efficiently calibrating larger devices becomes feasible. These results open up the inherently well-suited and scalable platform of quantum dots to emulate novel quantum states of matter.
We are entering the era of the second quantum revolution, where we aim to harness the power of quantum mechanics to create new technologies. Quantum technologies have the potential to revolutionize the fields of simulation, computation, communication, sensing, metrology, and many others. Here we discuss analog quantum simulation, which has attracted a lot of attention in the last few years from several platforms. Although arrays of gate-defined quantum dots exhibit significant potential for analog simulation, example experiments have been few and far between. This thesis focuses on simulating the Fermi-Hubbard model using two dimensional (2d) arrays of quantum dots. The first experiment describes the creation and measurement of a 2x2 quantum dot array. Historically, most experiments with quantum dots have been performed with linear arrays due to the relative ease of fabrication. We introduce a bi-layer gate structure, facilitated by the lift-off of sputtered silicon nitride, to create the 2x2 dot array. This gate design enables us to achieve unprecedented tunability of the tunnel coupling between all nearest-neighbor pairs of dots in 2d arrays. We also demonstrate individual control over the chemical potential and the electron occupation of each dot along with accurate measurement of the on-site and inter-site interaction terms. The use of virtual gates significantly aids in the tuning of tunnel coupling and chemical potential. The demonstrated high degree of control of the system along with fast single-shot spin-readout achieved through Pauli spin blockade establish this dot array as a promising simulator of the Fermi-Hubbard model. The 2x2 dot array is used to simulate Nagaoka ferromagnetism in the next experiment. This form of itinerant ferromagnetism arises from the Fermi-Hubbard model, and was first shown analytically in the limit of infinite interaction strengths and infinite lattices by Nagaoka in 1966. Nagaoka ferromagnetism has been a topic of rigorous theoretical studies ever since, but its experimental signature has eluded us for more than five decades. In this experiment, we load the four dot plaquette with three electrons and demonstrate the emergence of spontaneous ferromagnetism by measuring the spin correlation of two out of the three electrons. Changing the topology of the array to an open chain is shown to destroy the ferromagnetic signature, consistent with the Lieb-Mattis theorem. We also show indications that this ferromagnetic ground state can be destroyed by applying a perpendicular magnetic field, unlike most other forms of ferromagnetism. However, this ground state shows striking robustness to the offset in the local potential of any dot. This is the first experimental verification of Nagaoka’s prediction as well as the first simulation of magnetism using quantumdot arrays. The final experiment takes a different approach to simulate the Fermi-Hubbardmodel with a large 2d array of quantum dots. The dot array is created using only three gates in a top-down approach. This allows for only global control over the electron filling and tunnel coupling of the dots, contrary to the previous experiments. The readout is performed with capacitance spectroscopy, which allows us to directly probe the density of states of the two-dimensional electron systems. We measure the disorder levels and optimize both substrates and gating strategies to induce periodic potential, sufficiently stronger than the disorder level, at the 2d electron gas. Although we demonstrate a novel platformfor the realization of artificial lattices of interacting particles, this effort is currently limited by the substrate inhomogeneity.