Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2109.13776 · npj Quantum Information

Efficient quantum state tomography with convolutional neural networks

Tobias Schmale, Moritz Reh, Martin Gärttner

Published Sep 23, 2022• 91 citations
arXivHTMLPDF

Abstract

Abstract Modern day quantum simulators can prepare a wide variety of quantum states but the accurate estimation of observables from tomographic measurement data often poses a challenge. We tackle this problem by developing a quantum state tomography scheme which relies on approximating the probability distribution over the outcomes of an informationally complete measurement in a variational manifold represented by a convolutional neural network. We show an excellent representability of prototypical ground- and steady states with this ansatz using a number of variational parameters that scales polynomially in system size. This compressed representation allows us to reconstruct states with high classical fidelities outperforming standard methods such as maximum likelihood estimation. Furthermore, it achieves a reduction of the estimation error of observables by up to an order of magnitude compared to their direct estimation from experimental data.

DOI
10.1038/s41534-022-00621-4

Related papers

Efficient Approximate Quantum State Tomography with Basis Dependent Neural-Networks.

Alistair W. R. Smith, Johnnie Gray, M. S. Kim

We use a meta-learning neural-network approach to predict measurement outcomes of a quantum state in arbitrary local bases and thus carry out an approximate quantum state tomography. Each stage of this procedure can be performed efficiently, allowing it to be used effectively on large systems. We demonstrate this approach on the most recent noisy intermediate-scale IBM Quantum devices, achieving an accurate generative model for a 6-qubit state's measurement outcomes with only 100 random measurement settings as opposed to the 729 settings required for full tomography. This reduction in the required number of measurements scales favourably, with around 200 measurement settings yielding good results for a 10 qubit state that would require 59,049 settings for full quantum state tomography. This reduction in the number of measurement settings coupled with the efficiency of the procedure could allow for estimations of expectation values and state fidelities in practicable times on current quantum devices. For suitable states, this could then help in increasing the speed of other optimization schemes when attempting to produce states on noisy quantum devices at a scale where traditional maximum likelihood based approaches are impractical.

•Sep 16, 2020•2 citations

Learning quantum tomography from incomplete measurements

Mateusz Krawczyk, Pavel Baláž, Katarzyna Roszak +1 more

We revisit quantum tomography in an informationally incomplete scenario and propose improved state reconstruction methods using deep neural networks. In the first approach, the trained network predicts an optimal linear or quadratic reconstructor with coefficients depending only on the collection of (already taken) measurement operators. This effectively refines the undercomplete tomographic reconstructor based on pseudoinverse operation. The second, based on an LSTM recurrent network performs state reconstruction sequentially. It can also optimize the measurement sequence, which suggests a no-free-lunch theorem for tomography: by narrowing the state space, we gain the possibility of more efficient tomography by learning the optimal sequence of measurements. Numerical experiments for a 2-qubit system show that both methods outperform standard maximum likelihood estimation and also scale to larger 3- and 4-qubit systems. Our results demonstrate that neural networks can effectively learn the underlying geometry of multi-qubit states and use it for their reconstruction.

arXiv:2506.19428•Jun 24, 2025•2 citations

Learning hard quantum distributions with variational autoencoders

Andrea Rocchetto, Edward Grant, Sergii Strelchuk +2 more

Abstract The exact description of many-body quantum systems represents one of the major challenges in modern physics, because it requires an amount of computational resources that scales exponentially with the size of the system. Simulating the evolution of a state, or even storing its description, rapidly becomes intractable for exact classical algorithms. Recently, machine learning techniques, in the form of restricted Boltzmann machines, have been proposed as a way to efficiently represent certain quantum states with applications in state tomography and ground state estimation. Here, we introduce a practically usable deep architecture for representing and sampling from probability distributions of quantum states. Our representation is based on variational auto-encoders, a type of generative model in the form of a neural network. We show that this model is able to learn efficient representations of states that are easy to simulate classically and can compress states that are not classically tractable. Specifically, we consider the learnability of a class of quantum states introduced by Fefferman and Umans. Such states are provably hard to sample for classical computers, but not for quantum ones, under plausible computational complexity assumptions. The good level of compression achieved for hard states suggests these methods can be suitable for characterizing states of the size expected in first generation quantum hardware.

arXiv:1710.00725•npj Quantum Information•Jun 22, 2018•86 citations

Classification and reconstruction of optical quantum states with deep neural networks

Shahnawaz Ahmed, Carlos Sánchez Muñoz, Franco Nori +1 more

We apply deep-neural-network-based techniques to quantum state classification and reconstruction. Our methods demonstrate high classification accuracies and reconstruction fidelities, even in the presence of noise and with little data. Using optical quantum states as examples, we first demonstrate how convolutional neural networks (CNNs) can successfully classify several types of states distorted by, e.g., additive Gaussian noise or photon loss. We further show that a CNN trained on noisy inputs can learn to identify the most important regions in the data, which potentially can reduce the cost of tomography by guiding adaptive data collection. Secondly, we demonstrate reconstruction of quantum-state density matrices using neural networks that incorporate quantum-physics knowledge. The knowledge is implemented as custom neural-network layers that convert outputs from standard feed-forward neural networks to valid descriptions of quantum states. Any standard feed-forward neural-network architecture can be adapted for quantum state tomography (QST) with our method. We present further demonstrations of our proposed QST technique with conditional generative adversarial networks (QST-CGAN) [Ahmed et al., Phys. Rev. Lett. 127, 140502 (2021)]. We motivate our choice of a learnable loss function within an adversarial framework by demonstrating that the QST-CGAN outperforms, across a range of scenarios, generative networks trained with standard loss functions. For pure states with additive or convolutional Gaussian noise, the QST-CGAN is able to adapt to the noise and reconstruct the underlying state. The QST-CGAN reconstructs states using up to two orders of magnitude fewer iterative steps than iterative and accelerated projected-gradient-based maximum-likelihood estimation (MLE) methods. We also demonstrate that the QST-CGAN can reconstruct both pure and mixed states from two orders of magnitude fewer randomly chosen data points than these MLE methods. Our paper opens possibilities to use state-of-the-art deep-learning methods for quantum state classification and reconstruction under various types of noise.

arXiv:2012.02185•Physical Review Research•Sep 27, 2021•103 citations

Quantum state tomography of multi-qubit systems — a comparative study

Chengwei Pan, Jiaoyang Zhang, Shuang Cong +1 more

Multi-qubit state tomography is a key problem in quantum information technology, which has been studied extensively. In this work, we focus on multi-qubit state tomography based on neural network estimators and typical conventional estimation approaches. For multi-qubit pure states, fully connected neural networks and restricted Boltzmann machine networks are designed, respectively, to carry out state tomography of 2-qubit (low-dimensional) systems and 5-qubit (high-dimensional) systems. Comparisons are made with maximum likelihood estimation and least squares estimation, where performance indicators are selected as reconstruction accuracy, time cost and the number of parameters. Simulation results indicate that intelligent approaches have significant advantages over conventional approaches for state tomography of low-dimensional systems; for high-dimensional systems, however, the conventional approach is still dominant when the measurement is complete, while the restricted Boltzmann machine network can achieve higher reconstruction accuracy when the measurement is incomplete.

International Journal of Quantum Information•Aug 24, 2022•2 citations

Efficient Quantum State Sample Tomography with Basis-Dependent Neural Networks

Alistair W. R. Smith, Johnnie Gray, M. S. Kim

We use a metalearning neural-network approach to analyze data from a measured quantum state.Once our neural network has been trained, it can be used to efficiently sample measurements of the state in measurement bases not contained in the training data.These samples can be used to calculate expectation values and other useful quantities.We refer to this process as "state sample tomography."We encode the state's measurement outcome distributions using an efficiently parameterized generative neural network.This allows each stage in the tomography process to be performed efficiently even for large systems.Our scheme is demonstrated on recent IBM Quantum devices, producing a model for a six-qubit state's measurement outcomes with a predictive accuracy (classical fidelity) greater than 95% for all test cases using only 100 random measurement settings as opposed to the 729 settings required for standard full tomography using local measurements.This reduction in the required number of measurements scales favorably, with training data in 200 measurement settings, yielding a predictive accuracy greater than 92% for a ten-qubit state where 59 049 settings are typically required for full local measurement-based quantum state tomography.A reduction in the number of measurements by a factor, in this case, of almost 600 could allow for estimations of expectation values and state fidelities in practicable times on current quantum devices.

arXiv:2009.07601•PRX Quantum•Jun 28, 2021•34 citations
Abstract Modern day quantum simulators can prepare a wide variety of quantum states but the accurate estimation of observables from tomographic measurement data often poses a challenge. We tackle this problem by developing a quantum state tomography scheme which relies on approximating the probability distribution over the outcomes of an informationally complete measurement in a variational manifold represented by a convolutional neural network. We show an excellent representability of prototypical ground- and steady states with this ansatz using a number of variational parameters that scales polynomially in system size. This compressed representation allows us to reconstruct states with high classical fidelities outperforming standard methods such as maximum likelihood estimation. Furthermore, it achieves a reduction of the estimation error of observables by up to an order of magnitude compared to their direct estimation from experimental data.
We use a meta-learning neural-network approach to predict measurement outcomes of a quantum state in arbitrary local bases and thus carry out an approximate quantum state tomography. Each stage of this procedure can be performed efficiently, allowing it to be used effectively on large systems. We demonstrate this approach on the most recent noisy intermediate-scale IBM Quantum devices, achieving an accurate generative model for a 6-qubit state's measurement outcomes with only 100 random measurement settings as opposed to the 729 settings required for full tomography. This reduction in the required number of measurements scales favourably, with around 200 measurement settings yielding good results for a 10 qubit state that would require 59,049 settings for full quantum state tomography. This reduction in the number of measurement settings coupled with the efficiency of the procedure could allow for estimations of expectation values and state fidelities in practicable times on current quantum devices. For suitable states, this could then help in increasing the speed of other optimization schemes when attempting to produce states on noisy quantum devices at a scale where traditional maximum likelihood based approaches are impractical.
We revisit quantum tomography in an informationally incomplete scenario and propose improved state reconstruction methods using deep neural networks. In the first approach, the trained network predicts an optimal linear or quadratic reconstructor with coefficients depending only on the collection of (already taken) measurement operators. This effectively refines the undercomplete tomographic reconstructor based on pseudoinverse operation. The second, based on an LSTM recurrent network performs state reconstruction sequentially. It can also optimize the measurement sequence, which suggests a no-free-lunch theorem for tomography: by narrowing the state space, we gain the possibility of more efficient tomography by learning the optimal sequence of measurements. Numerical experiments for a 2-qubit system show that both methods outperform standard maximum likelihood estimation and also scale to larger 3- and 4-qubit systems. Our results demonstrate that neural networks can effectively learn the underlying geometry of multi-qubit states and use it for their reconstruction.
Abstract The exact description of many-body quantum systems represents one of the major challenges in modern physics, because it requires an amount of computational resources that scales exponentially with the size of the system. Simulating the evolution of a state, or even storing its description, rapidly becomes intractable for exact classical algorithms. Recently, machine learning techniques, in the form of restricted Boltzmann machines, have been proposed as a way to efficiently represent certain quantum states with applications in state tomography and ground state estimation. Here, we introduce a practically usable deep architecture for representing and sampling from probability distributions of quantum states. Our representation is based on variational auto-encoders, a type of generative model in the form of a neural network. We show that this model is able to learn efficient representations of states that are easy to simulate classically and can compress states that are not classically tractable. Specifically, we consider the learnability of a class of quantum states introduced by Fefferman and Umans. Such states are provably hard to sample for classical computers, but not for quantum ones, under plausible computational complexity assumptions. The good level of compression achieved for hard states suggests these methods can be suitable for characterizing states of the size expected in first generation quantum hardware.
We apply deep-neural-network-based techniques to quantum state classification and reconstruction. Our methods demonstrate high classification accuracies and reconstruction fidelities, even in the presence of noise and with little data. Using optical quantum states as examples, we first demonstrate how convolutional neural networks (CNNs) can successfully classify several types of states distorted by, e.g., additive Gaussian noise or photon loss. We further show that a CNN trained on noisy inputs can learn to identify the most important regions in the data, which potentially can reduce the cost of tomography by guiding adaptive data collection. Secondly, we demonstrate reconstruction of quantum-state density matrices using neural networks that incorporate quantum-physics knowledge. The knowledge is implemented as custom neural-network layers that convert outputs from standard feed-forward neural networks to valid descriptions of quantum states. Any standard feed-forward neural-network architecture can be adapted for quantum state tomography (QST) with our method. We present further demonstrations of our proposed QST technique with conditional generative adversarial networks (QST-CGAN) [Ahmed et al., Phys. Rev. Lett. 127, 140502 (2021)]. We motivate our choice of a learnable loss function within an adversarial framework by demonstrating that the QST-CGAN outperforms, across a range of scenarios, generative networks trained with standard loss functions. For pure states with additive or convolutional Gaussian noise, the QST-CGAN is able to adapt to the noise and reconstruct the underlying state. The QST-CGAN reconstructs states using up to two orders of magnitude fewer iterative steps than iterative and accelerated projected-gradient-based maximum-likelihood estimation (MLE) methods. We also demonstrate that the QST-CGAN can reconstruct both pure and mixed states from two orders of magnitude fewer randomly chosen data points than these MLE methods. Our paper opens possibilities to use state-of-the-art deep-learning methods for quantum state classification and reconstruction under various types of noise.
Multi-qubit state tomography is a key problem in quantum information technology, which has been studied extensively. In this work, we focus on multi-qubit state tomography based on neural network estimators and typical conventional estimation approaches. For multi-qubit pure states, fully connected neural networks and restricted Boltzmann machine networks are designed, respectively, to carry out state tomography of 2-qubit (low-dimensional) systems and 5-qubit (high-dimensional) systems. Comparisons are made with maximum likelihood estimation and least squares estimation, where performance indicators are selected as reconstruction accuracy, time cost and the number of parameters. Simulation results indicate that intelligent approaches have significant advantages over conventional approaches for state tomography of low-dimensional systems; for high-dimensional systems, however, the conventional approach is still dominant when the measurement is complete, while the restricted Boltzmann machine network can achieve higher reconstruction accuracy when the measurement is incomplete.
We use a metalearning neural-network approach to analyze data from a measured quantum state.Once our neural network has been trained, it can be used to efficiently sample measurements of the state in measurement bases not contained in the training data.These samples can be used to calculate expectation values and other useful quantities.We refer to this process as "state sample tomography."We encode the state's measurement outcome distributions using an efficiently parameterized generative neural network.This allows each stage in the tomography process to be performed efficiently even for large systems.Our scheme is demonstrated on recent IBM Quantum devices, producing a model for a six-qubit state's measurement outcomes with a predictive accuracy (classical fidelity) greater than 95% for all test cases using only 100 random measurement settings as opposed to the 729 settings required for standard full tomography using local measurements.This reduction in the required number of measurements scales favorably, with training data in 200 measurement settings, yielding a predictive accuracy greater than 92% for a ten-qubit state where 59 049 settings are typically required for full local measurement-based quantum state tomography.A reduction in the number of measurements by a factor, in this case, of almost 600 could allow for estimations of expectation values and state fidelities in practicable times on current quantum devices.