Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2109.12652 · Quantum

Unitary Selective Coupled-Cluster Method

Dmitry A. Fedorov, Yuri Alexeev, Stephen K. Gray, Matthew Otten

Published May 2, 2022• 40 citations
arXivHTMLPDF

Abstract

Simulating molecules using the Variational Quantum Eigensolver method is one of the promising applications for NISQ-era quantum computers. Designing an efficient ansatz to represent the electronic wave function is crucial in such simulations. Standard unitary coupled-cluster with singles and doubles (UCCSD) ansatz tends to have a large number of insignificant terms that do not lower the energy of the system. In this work, we present a unitary selective coupled-cluster method, a way to construct a unitary coupled-cluster ansatz iteratively using a selection procedure with excitations up to fourth order. This approach uses the electronic Hamiltonian matrix elements and the amplitudes for excitations already present in the ansatz to find the important excitations of higher order and to add them to the ansatz. The important feature of the method is that it systematically reduces the energy error with increasing ansatz size for a set of test molecules. {The main advantage of the proposed method is that the effort to increase the ansatz does not require any additional measurements on a quantum computer.}

DOI
10.22331/q-2022-05-02-703

Related papers

Extension of the Trotterized Unitary Coupled Cluster to Triple Excitations

Mohammad Haidar, Marko J. Rančić, Yvon Maday +1 more

The Trotterized Unitary Coupled Cluster Single and Double (UCCSD) ansatz has recently attracted interest due to its use in Variation Quantum Eigensolver (VQE) molecular simulations on quantum computers. However, when the size of molecules increases, UCCSD becomes less interesting as it cannot achieve sufficient accuracy. Including higher-order excitations is therefore mandatory to recover the UCC's missing correlation effects. In this Letter, we extend the Trotterized UCC approach via the addition of (true) Triple T excitations introducing UCCSDT. We also include both spin and orbital symmetries. Indeed, in practice, these later help to reduce unnecessarily circuit excitations and thus accelerate the optimization process enabling to tackle larger molecules. Our initial numerical tests (12-14 qubits) show that UCCSDT improves the overall accuracy by at least two-orders of magnitudes with respect to standard UCCSD. Overall, the UCCSDT ansatz is shown to reach chemical accuracy and to be competitive with the CCSD(T) gold-standard classical method of quantum chemistry.

arXiv:2212.12462•Dec 23, 2022•3 citations

Extension of the Trotterized Unitary Coupled Cluster to Triple Excitations

Mohammad Haidar, Marko J. Rančić, Yvon Maday +1 more

The Trotterized Unitary Coupled Cluster Single and Double (UCCSD) ansatz has recently attracted interest due to its use in Variation Quantum Eigensolver (VQE) molecular simulations on quantum computers. However, when the size of molecules increases, UCCSD becomes less interesting as it cannot achieve sufficient accuracy. Including higher-order excitations is therefore mandatory to recover the UCC's missing correlation effects. Here, we extend the Trotterized UCC approach via the addition of (true) Triple T excitations introducing UCCSDT. We also include both spin and orbital symmetries. Indeed, in practice, the latter help to reduce unnecessary circuit excitations and thus accelerate the optimization process enabling researchers to tackle larger molecules. Our initial numerical tests (12-14 qubits) show that UCCSDT improves the overall accuracy by at least two orders of magnitude with respect to standard UCCSD. Overall, the UCCSDT ansatz is shown to reach chemical accuracy and to be competitive with the CCSD(T) gold-standard classical method of quantum chemistry.

The Journal of Physical Chemistry A•Apr 11, 2023•17 citations

Quantum orbital-optimized unitary coupled cluster methods in the strongly correlated regime: Can quantum algorithms outperform their classical equivalents?

Igor O. Sokolov, Panagiotis Kl. Barkoutsos, Pauline J. Ollitrault +4 more

The Coupled Cluster (CC) method is used to compute the electronic correlation energy in atoms and molecules and often leads to highly accurate results. However, due to its single-reference nature, standard CC in its projected form fails to describe quantum states characterized by strong electronic correlations and multi-reference projective methods become necessary. On the other hand, quantum algorithms for the solution of many-electron problems have also emerged recently. The quantum unitary variant of CC (UCC) with singles and doubles (q-UCCSD) is a popular wavefunction Ansatz for the variational quantum eigensolver algorithm. The variational nature of this approach can lead to significant advantages compared to its classical equivalent in the projected form, in particular, for the description of strong electronic correlation. However, due to the large number of gate operations required in q-UCCSD, approximations need to be introduced in order to make this approach implementable in a state-of-the-art quantum computer. In this work, we evaluate several variants of the standard q-UCCSD Ansatz in which only a subset of excitations is included. In particular, we investigate the singlet and pair q-UCCD approaches combined with orbital optimization. We show that these approaches can capture the dissociation/distortion profiles of challenging systems, such as H4, H2O, and N2 molecules, as well as the one-dimensional periodic Fermi–Hubbard chain. These results promote the future use of q-UCC methods for the solution of challenging electronic structure problems in quantum chemistry.

arXiv:1911.10864•The Journal of Chemical Physics•Mar 25, 2020•177 citations

Generalized Unitary Coupled Cluster Wave functions for Quantum Computation

Joonho Lee, William J. Huggins, Martin Head‐Gordon +1 more

We introduce a unitary coupled-cluster (UCC) ansatz termed k -UpCCGSD that is based on a family of sparse generalized doubles operators, which provides an affordable and systematically improvable unitary coupled-cluster wave function suitable for implementation on a near-term quantum computer. k -UpCCGSD employs k products of the exponential of pair coupled-cluster double excitation operators (pCCD), together with generalized single excitation operators. We compare its performance in both efficiency of implementation and accuracy with that of the generalized UCC ansatz employing the full generalized single and double excitation operators (UCCGSD), as well as with the standard ansatz employing only single and double excitations (UCCSD). k -UpCCGSD is found to show the best scaling for quantum computing applications, requiring a circuit depth of, compared with for UCCGSD, and for UCCSD, where N is the number of spin orbitals and η is the number of electrons. We analyzed the accuracy of these three ansätze by making classical benchmark calculations on the ground state and the first excited state of H 4 (STO-3G, 6-31G), H 2 O (STO-3G), and N 2 (STO-3G), making additional comparisons to conventional coupled cluster methods. The results for ground states show that k -UpCCGSD offers a good trade-off between accuracy and cost, achieving chemical accuracy for lower cost of implementation on quantum computers than both UCCGSD and UCCSD. UCCGSD is also found to be more accurate than UCCSD but at a greater cost for implementation. Excited states are calculated with an orthogonally constrained variational quantum eigensolver approach. This is seen to generally yield less accurate energies than for the corresponding ground states. We demonstrate that using a specialized multideterminantal reference state constructed from classical linear response calculations allows these excited state energetics to be improved.

arXiv:1810.02327•Journal of Chemical Theory and Computation•Nov 28, 2018•446 citations

The Localized Active Space Method with Unitary Selective Coupled Cluster

Abhishek Mitra, Ruhee D’Cunha, Qiaohong Wang +5 more

We introduce a hybrid quantum-classical algorithm, the localized active space unitary selective coupled cluster singles and doubles (LAS-USCCSD) method. Derived from the localized active space unitary coupled cluster (LAS-UCCSD) method, LAS-USCCSD first performs a classical LASSCF calculation, then selectively identifies the most important parameters (cluster amplitudes used to build the multireference UCC ansatz) for restoring interfragment interaction energy using this reduced set of parameters with the variational quantum eigensolver method. We benchmark LAS-USCCSD against LAS-UCCSD by calculating the total energies of (H 2 ) 2, (H 2 ) 4, and trans -butadiene, and the magnetic coupling constant for a bimetallic compound [Cr 2 (OH) 3 (NH 3 ) 6 ] 3+ . For these systems, we find that LAS-USCCSD reduces the number of required parameters and thus the circuit depth by at least 1 order of magnitude, an aspect which is important for the practical implementation of multireference hybrid quantum-classical algorithms like LAS-UCCSD on near-term quantum computers.

arXiv:2404.12927•Journal of Chemical Theory and Computation•Sep 10, 2024•16 citations

A Unified Benchmarking Study of Variational Quantum Eigensolver Ansatz for Electronic Structure Problems

Julie Maria Raju, Abhoy Kole, Julen Larrucea +3 more

Electronic structure calculations become computationally expensive on classical computers as electron correlation increases. Quantum computing offers a promising alternative through hybrid quantum-classical Variational Quantum Eigensolver (VQE) on Noisy-Intermediate Scale Quantum (NISQ) devices. The choice of ansatz plays a pivotal role in the performance and scalability of the VQE, yet selecting an optimal ansatz remains challenging. Existing approaches including chemically inspired ansatz, adaptive schemes and Hardware Efficient Ansätze (HEA) lack a unified comparison. This gap makes the scalability and trade-offs of each method unclear for varying molecular sizes. This work presents a systematic benchmarking study comparing Unitary Couples Cluster Singles and Doubles Ansatz (UCCSD), fermionic ADAPT-VQE, BasicPCA HEA, and Excitation Preserving HEA across molecules of varying size like $H_2$, $LiH$, $N_2$. We evaluate trade-offs among circuit depth, parameter count, ground-state energy error, and NISQ feasibility. ADAPT-VQE achieves accuracy comparable to UCCSD with lower resource overhead, but becomes impractical for modest system sizes ($\sim$10 electrons) due to increasing circuit complexity. In contrast, HEA reduces hardware costs but requires more parameters and sacrifices accuracy, with performance strongly dependent on molecular size. The Excitation Preserving ansatz remains below chemical accuracy for $H_2$ and $LiH$, and fails for $N_2$, underscoring the need to balance expressibility and trainability. Overall, these results highlight key trade-offs between accuracy and resource efficiency across VQE ansätze, emphasizing the need to improve ADAPT-VQE scalability and HEA accuracy while addressing optimization challenges for near-term quantum hardware.

arXiv:2611.15365•Nov 11, 2026•0 citations
Simulating molecules using the Variational Quantum Eigensolver method is one of the promising applications for NISQ-era quantum computers. Designing an efficient ansatz to represent the electronic wave function is crucial in such simulations. Standard unitary coupled-cluster with singles and doubles (UCCSD) ansatz tends to have a large number of insignificant terms that do not lower the energy of the system. In this work, we present a unitary selective coupled-cluster method, a way to construct a unitary coupled-cluster ansatz iteratively using a selection procedure with excitations up to fourth order. This approach uses the electronic Hamiltonian matrix elements and the amplitudes for excitations already present in the ansatz to find the important excitations of higher order and to add them to the ansatz. The important feature of the method is that it systematically reduces the energy error with increasing ansatz size for a set of test molecules. {The main advantage of the proposed method is that the effort to increase the ansatz does not require any additional measurements on a quantum computer.}
The Trotterized Unitary Coupled Cluster Single and Double (UCCSD) ansatz has recently attracted interest due to its use in Variation Quantum Eigensolver (VQE) molecular simulations on quantum computers. However, when the size of molecules increases, UCCSD becomes less interesting as it cannot achieve sufficient accuracy. Including higher-order excitations is therefore mandatory to recover the UCC's missing correlation effects. In this Letter, we extend the Trotterized UCC approach via the addition of (true) Triple T excitations introducing UCCSDT. We also include both spin and orbital symmetries. Indeed, in practice, these later help to reduce unnecessarily circuit excitations and thus accelerate the optimization process enabling to tackle larger molecules. Our initial numerical tests (12-14 qubits) show that UCCSDT improves the overall accuracy by at least two-orders of magnitudes with respect to standard UCCSD. Overall, the UCCSDT ansatz is shown to reach chemical accuracy and to be competitive with the CCSD(T) gold-standard classical method of quantum chemistry.
The Trotterized Unitary Coupled Cluster Single and Double (UCCSD) ansatz has recently attracted interest due to its use in Variation Quantum Eigensolver (VQE) molecular simulations on quantum computers. However, when the size of molecules increases, UCCSD becomes less interesting as it cannot achieve sufficient accuracy. Including higher-order excitations is therefore mandatory to recover the UCC's missing correlation effects. Here, we extend the Trotterized UCC approach via the addition of (true) Triple T excitations introducing UCCSDT. We also include both spin and orbital symmetries. Indeed, in practice, the latter help to reduce unnecessary circuit excitations and thus accelerate the optimization process enabling researchers to tackle larger molecules. Our initial numerical tests (12-14 qubits) show that UCCSDT improves the overall accuracy by at least two orders of magnitude with respect to standard UCCSD. Overall, the UCCSDT ansatz is shown to reach chemical accuracy and to be competitive with the CCSD(T) gold-standard classical method of quantum chemistry.
The Coupled Cluster (CC) method is used to compute the electronic correlation energy in atoms and molecules and often leads to highly accurate results. However, due to its single-reference nature, standard CC in its projected form fails to describe quantum states characterized by strong electronic correlations and multi-reference projective methods become necessary. On the other hand, quantum algorithms for the solution of many-electron problems have also emerged recently. The quantum unitary variant of CC (UCC) with singles and doubles (q-UCCSD) is a popular wavefunction Ansatz for the variational quantum eigensolver algorithm. The variational nature of this approach can lead to significant advantages compared to its classical equivalent in the projected form, in particular, for the description of strong electronic correlation. However, due to the large number of gate operations required in q-UCCSD, approximations need to be introduced in order to make this approach implementable in a state-of-the-art quantum computer. In this work, we evaluate several variants of the standard q-UCCSD Ansatz in which only a subset of excitations is included. In particular, we investigate the singlet and pair q-UCCD approaches combined with orbital optimization. We show that these approaches can capture the dissociation/distortion profiles of challenging systems, such as H4, H2O, and N2 molecules, as well as the one-dimensional periodic Fermi–Hubbard chain. These results promote the future use of q-UCC methods for the solution of challenging electronic structure problems in quantum chemistry.
We introduce a unitary coupled-cluster (UCC) ansatz termed k -UpCCGSD that is based on a family of sparse generalized doubles operators, which provides an affordable and systematically improvable unitary coupled-cluster wave function suitable for implementation on a near-term quantum computer. k -UpCCGSD employs k products of the exponential of pair coupled-cluster double excitation operators (pCCD), together with generalized single excitation operators. We compare its performance in both efficiency of implementation and accuracy with that of the generalized UCC ansatz employing the full generalized single and double excitation operators (UCCGSD), as well as with the standard ansatz employing only single and double excitations (UCCSD). k -UpCCGSD is found to show the best scaling for quantum computing applications, requiring a circuit depth of, compared with for UCCGSD, and for UCCSD, where N is the number of spin orbitals and η is the number of electrons. We analyzed the accuracy of these three ansätze by making classical benchmark calculations on the ground state and the first excited state of H 4 (STO-3G, 6-31G), H 2 O (STO-3G), and N 2 (STO-3G), making additional comparisons to conventional coupled cluster methods. The results for ground states show that k -UpCCGSD offers a good trade-off between accuracy and cost, achieving chemical accuracy for lower cost of implementation on quantum computers than both UCCGSD and UCCSD. UCCGSD is also found to be more accurate than UCCSD but at a greater cost for implementation. Excited states are calculated with an orthogonally constrained variational quantum eigensolver approach. This is seen to generally yield less accurate energies than for the corresponding ground states. We demonstrate that using a specialized multideterminantal reference state constructed from classical linear response calculations allows these excited state energetics to be improved.
We introduce a hybrid quantum-classical algorithm, the localized active space unitary selective coupled cluster singles and doubles (LAS-USCCSD) method. Derived from the localized active space unitary coupled cluster (LAS-UCCSD) method, LAS-USCCSD first performs a classical LASSCF calculation, then selectively identifies the most important parameters (cluster amplitudes used to build the multireference UCC ansatz) for restoring interfragment interaction energy using this reduced set of parameters with the variational quantum eigensolver method. We benchmark LAS-USCCSD against LAS-UCCSD by calculating the total energies of (H 2 ) 2, (H 2 ) 4, and trans -butadiene, and the magnetic coupling constant for a bimetallic compound [Cr 2 (OH) 3 (NH 3 ) 6 ] 3+ . For these systems, we find that LAS-USCCSD reduces the number of required parameters and thus the circuit depth by at least 1 order of magnitude, an aspect which is important for the practical implementation of multireference hybrid quantum-classical algorithms like LAS-UCCSD on near-term quantum computers.
Electronic structure calculations become computationally expensive on classical computers as electron correlation increases. Quantum computing offers a promising alternative through hybrid quantum-classical Variational Quantum Eigensolver (VQE) on Noisy-Intermediate Scale Quantum (NISQ) devices. The choice of ansatz plays a pivotal role in the performance and scalability of the VQE, yet selecting an optimal ansatz remains challenging. Existing approaches including chemically inspired ansatz, adaptive schemes and Hardware Efficient Ansätze (HEA) lack a unified comparison. This gap makes the scalability and trade-offs of each method unclear for varying molecular sizes. This work presents a systematic benchmarking study comparing Unitary Couples Cluster Singles and Doubles Ansatz (UCCSD), fermionic ADAPT-VQE, BasicPCA HEA, and Excitation Preserving HEA across molecules of varying size like H2H_2H2​, LiHLiHLiH, N2N_2N2​. We evaluate trade-offs among circuit depth, parameter count, ground-state energy error, and NISQ feasibility. ADAPT-VQE achieves accuracy comparable to UCCSD with lower resource overhead, but becomes impractical for modest system sizes ($\sim$10 electrons) due to increasing circuit complexity. In contrast, HEA reduces hardware costs but requires more parameters and sacrifices accuracy, with performance strongly dependent on molecular size. The Excitation Preserving ansatz remains below chemical accuracy for H2H_2H2​ and LiHLiHLiH, and fails for N2N_2N2​, underscoring the need to balance expressibility and trainability. Overall, these results highlight key trade-offs between accuracy and resource efficiency across VQE ansätze, emphasizing the need to improve ADAPT-VQE scalability and HEA accuracy while addressing optimization challenges for near-term quantum hardware.